Running Config not available
Hello
For 1 of the switch it show's me running config not available,Please have a look at the attached.
Thanks
You are user have privilege for see the configuration..... otherwise dont see configuration.
username name1 privilege 15
Greetings
Similar Messages
-
IChat server admin Service Running, status not available
X-Serve running 10.6.8
I noticed the other day thaat when I look at the iChat service in Server Admin, I observed the following:
iChat service is: Running
Start Time: Not Available
Domain: Not Available
Client Connections: Not Available
The log screen says No Log Files exist
I have seen similar screens when there was a slight lag in server admin gathering information to display on screen. This stays this way indefinately. The service is working as far as I can tell, IE people can log in, add each other, and chat. A log file is in fact being used and updated (/var/jabberd/message_archive/)
I noticed this because I was trying to autobuddy.sh, I script I use often to update when I add new users to the organization so they show up in everyones group list. I attempted to stop the service from the command line using:
#:serveradmin stop jabber
#:jabber: state = RUNNING
and was never able to stop iChat. The system behaves the same after a reboot. I am not sure what to do, or what the actual problem is. The only thing besides a reboot that I tried was a permission repair from within the OS.
In the log below I removed some user specific information because they are user names for users on my network. This server and service is internal only.
the console logs I have this:
Nov 30 10:29:55 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:30:15: --- last message repeated 2 times ---
Nov 30 10:30:19 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:31:05 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:49:17 aphrodite com.mycompany.autobuddy[83710]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:12:34 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 11:12:34 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 11:19:17 aphrodite com.mycompany.autobuddy[87010]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:49:17 aphrodite com.mycompany.autobuddy[90323]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: checking user "jimrumrillcotaoilcom" access for service "chat"
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 12:03:14 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 12:03:14 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 12:03:32 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:04:26: --- last message repeated 2 times ---
Nov 30 12:05:25 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:06:26: --- last message repeated 1 time ---
Nov 30 12:06:26 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:06:57: --- last message repeated 1 time ---
Nov 30 12:07:27 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:08:28: --- last message repeated 1 time ---
Nov 30 12:08:28 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:09:26: --- last message repeated 1 time ---
Nov 30 12:09:29 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:09:59: --- last message repeated 1 time ---
Nov 30 12:10:30 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:11:30: --- last message repeated 1 time ---
Nov 30 12:11:30 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:12:00: --- last message repeated 1 time ---
Nov 30 12:12:31 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:13:32: --- last message repeated 1 time ---
Nov 30 12:13:32 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:14:26: --- last message repeated 1 time ---
Nov 30 12:14:33 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:15:34: --- last message repeated 1 time ---
Nov 30 12:15:34 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:16:35: --- last message repeated 1 time ---
Nov 30 12:16:35 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:17:05: --- last message repeated 1 time ---
Nov 30 12:17:36 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:18:37: --- last message repeated 1 time ---
Nov 30 12:18:37 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:19:17: --- last message repeated 1 time ---
Nov 30 12:19:17 aphrodite com.mycompany.autobuddy[94140]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 12:19:38 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:19:53: --- last message repeated 1 time ---
Nov 30 12:20:39 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:20:45: --- last message repeated 1 time ---
Nov 30 12:21:40 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:22:10: --- last message repeated 1 time ---
Nov 30 12:22:41 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:22:47: --- last message repeated 1 time ---
Nov 30 12:23:42 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:24:26: --- last message repeated 1 time ---
Nov 30 12:24:43 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:25:10: --- last message repeated 1 time ---
Nov 30 12:25:44 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:26:45: --- last message repeated 1 time ---
Nov 30 12:26:45 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:27:16: --- last message repeated 1 time ---
Nov 30 12:28:24 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:29:00: --- last message repeated 3 times ---
Nov 30 12:29:00 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Any help on what might be going on or a push in a direction would be greatly appreciated.
Thanks!Well I searched the forums here and I found some similar issues, however the fix's I was directed too did not resolve the problem.
I did notice this today after reading a post regarding the use of the .local domain name, and fixing that fixes this issue:
When i selected my server on the left hand side of server admin, click on settings at the top (the gear) then on Network, I see:
Ethernet 1 (eth0) IPv4 192.1.1.4 Aphrodite.local
I am not sure where the .local is coming from. This is an internal server and has been configured with a FQDN for 2 years now, aphrodite.cotaoil.net. On the server, the only other place I see the .local, is in system preferences, sharing, at the top it has my fqdn, but when I click on edit, it has a local host field that says Aphrodite, with a .local greyed out after, or ghosted.
When I use the command changeip -checkhostname I recieve:
changeip -checkhostname
Primary address = 192.1.1.4
Current HostName = aphrodite.cotaoil.net
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
the hostname not available message is new (well I know at some point in the not too distant past I did not have this message) so I am not sure if an update broke this or not but basically I am not sure where to go from here.
The DNS settings are set the same as they were when I originally set up the server. Reviewing DNS logs, I do not see anything abnormal.
additionally when I run scutil i get:
aphrodite:~ root# scutil --get LocalHostName
Aphrodite
aphrodite:~ root# scutil --get ComputerName
Aphrodite.cotaoil.net
I am a little stumped as to where to go from here. I believe based on some other posts Ive read that this may have something to do with why I cannot see any iChat status and am recieving the dreaded "detailed service status not available until network configuration completed"
Thanks for any and all thoughts. Currently reviewing Hoffs tutorials, but I used combined Hoff tutorials and apple server guides when originally set up the server. Please let me know what I did wrong (besides my internal IP range) -
Dhcpcd not running, network not available
Jun 15 12:10:05 localhost dhcpcd[457]: dhcpcd not running
Jun 15 12:10:05 localhost dhcpcd[463]: dhcpcd not running
Jun 15 12:10:05 localhost dhcpcd[471]: dhcpcd not running
Jun 15 12:10:37 localhost dhcpcd[476]: timed out
Jun 15 12:10:41 localhost dhcpcd[599]: dhcpcd not running
Jun 15 12:10:41 localhost dhcpcd[605]: dhcpcd not running
Why does it do so and how do I fix it ?
I mean, I can of course start it manually, but doing that on every reboot is ackward.Trilby wrote:
MinimalBoot wrote:No, because I need wireless/GUI functionality.
MinimalBoot wrote:I am using a wired connection
WTF?!
The fact that I need it doesn't explicitly mean that I am currently using it.
Trilby wrote:
MinimalBoot wrote:having any kind of network manager ( network, networkmanager, wicd, .. ) running should be enough
Not for wireless it shouldn't. But in either case, if you took my above advise, followed the wiki, tried reading the wiki, and followed the simple step by step instructions on connecting manually you would have easily pinpointed your problem and other users here could then help.
I did pinpoint my problem - dhcpcd is not being started on boot, though rc.conf contains everything needed for this.
Trilby wrote:
The wiki page on wireless and/or network management is not 10 pages. The wireless page may seem a little long, but a quick glance will tell you that it has various subsections that can be skipped depending on your wireless card.
In the end, though. If you aren't willing to spend a little of your own time reading the answers that are already availble, why on earth would I waste my time rewriting all those answers here? So you could just ignore them again?
Best of luck, I can't imagine you finding much help here with that approach.
Excuse me ? If you are here just to brag about having an awesome Wiki page, please, don't waste your time. -
Hi
I use command 'show run' on my router but no configuration display , when i try to copy startup running it display error message ' %Error opening system:/running-config (Not enough space) '
how can i solve this problem
ThanksHi,
What router it is ??? Becz, On Cisco 7500 series routers (including 7000 series with the RSP7000 card upgrade), a memory scanning feature is available.
Just go thro, this link under Reallocating DRAM Memory
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00800ca737.html#wp1006990
which will give reasons and solutions for this kind problem.
Hope this will help,
Rgs, -
Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-ChrisHi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?
I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone??? -
I'm running OS X 10.7.5 on my MacBook Pro. I can't get a DVD to eject. I'm getting an error message "supported disc not available" when I try to use the DVD player eject button. It also does not show up on my desk top as an icon as it normally would. How can I get the disc to eject?
see Thread
https://discussions.apple.com/thread/3996208?start=0&tstart=0
and Kappy reply -
How to run BW reports since BI JAVA is not available in 7.4.
We have Upgrade our BW 7.0 to BW 7.4 on HANA, How to run our BW reports since BI JAVA is not available in 7.4.
My scenario: Producer Portal (BW portal ) we are creating/marinating Portal objects ( Folders, roles, work sets ……etc.), which replicate in Consumer portal (EP portal) via Federation framework. In-fact its abstraction layer, not hosting any Portal content physically but giving a unified enterprise access to business. The actual content and execution of users requests occur on Producer portal itself.
We have to maintain two portal in this case (consumer & producer).
In BW 7.4 version, dual stock is no longer supported. In order to maintain the federation paradigm have to purchase new license & servers for java stack. What about if we directly integrate our BW reports in EP portal ? what would be draw back or issues in this approach in terms of durability, maintenance administration efforts……….etc . Please suggest us the best design solution for me. Need expert opinion.
Now it looks like extra layer (Standalone JAVA stack) to maintain & host? Agree or no?
Is federation still have worth or have some else new SAP concept. ?
Thx,
JameelHi Nawab,
1
Of course, do additional users and activity also consume ressources of the EP 'machine'.
If you'll run in performance leak, is depending on the special situation. And of course the AS Java can be tuned/optimized for higher workload.
Maybe if you are on a virutualized environment, it's easily possible to increase the ressources of the machine/s - or its possible to add additional java-nodes on separate servers...
Lots of possibilities to increase the workload-power if needed...
From my personal opinion, I usually recommend a separate BI-Java instance - not shared with other funcitonality.
2
Not sure if I get you right.
There are two technical options to run a ABAP+JAVA Stack on one server.
In one SAP instance - then ABAP and java processes are controlled in one framework. --> This option is not possible any more under 7.4
in separate SAP instances - then the two SAP systems are running on same host but each has its on framework/instance running. It is similar to running on separte servers.
Licensing:
From an SAP view, there is no additional licensing cost for the separte Java Stack!
But for sure, if you set it up on a separate server you may have additional cost for OS licensing, VMware, etc. - depending on your infrastructure...
My recommend, if you plan to move with that stuff to HANA:
Assuming you have 2-system landscape - DEV and PRD.
Assuming you are in a virtual environment like vmware.
Currentently you have two servers - on each a DualStack BW incl. current database on it.
1. Set up four new machines with half sizing as you currently have.
2. Split the DualStack and run the two new Java stacks on the new servers.
3. Migrate your BW ABAP to HANA
Set up the ABAP Application servers for your BWonHANA on the other two new servers.
4. Kill/Recycle the two now free servers.
Regards,
Stefan -
Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
PiyushHi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A -
Web service is running but Server Admin says "Not available"
Hello,
I cannot configure the web service using the Server Admin tool any more. The service is running and showing no error, but the "Web" icon in the "Computer & Services" panel of Server Admin is showing dark grey color. The Overview tab of the Web Service is stating: "Web Service is: Not available"
Any ideas what I can do to get it work again?
sudo apachectl configtest gave no errors or warnings.
Mac OS X (10.4.7)You should not be logging in as root, despite what anyone has told you.
And the entire mechanism of OS X Server (and most other *nix OS-en), is meant for you to not be logged in as root.
Use sudo and/or authenticate in the GUI when/where needed.
Please try Wesley's advise here:
http://discussions.apple.com/thread.jspa?messageID=2862670
Try launching apache manually, and watch your logs
Ie:
in one terminal window, type:
tail -f /var/log/httpd/error_log
make a new Terminal window and type:
sudo apachectl start -
System 'CE3' is not available. Make sure it is running properly.
hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?
Thanks.Hi Rodrigo,
The HTTP error code 502 is 'Bad gateway'. I also experienced this once or twice when I configured a certain proxy (or proxy script) that wasn't able to resolve that host. Try bypassing the proxy or using a special proxy for your host CE3 in the Proxy Settings of your NWDS.
Cheers,
Martin -
SAPOsCol running but not working (shared memory not available)
Dear Forum,
We have just set new passwords for SAP AD users (incl SAPService<SID> and <SID>adm), after this restarted SAP instances and servers / clusters). Everything came up well and all services, incl SAPOsCol started up automatically with the new passwords.
Everything works fine - only this morning i wanted to have a look in ST06 and the program tells me "SAPOSCOL not running? (shared memory not available).
The service is running tho, would a restart of the service do any difference, and is there any possibility that a restart of the service on a live and running system would force a system restart? (i couldnt think of any, but I hate restarting services on a live running production system).
Would it be an option to stop/start the collector from ST06?
Thanks in advance,
Kind regards,
SorenHello Kaushal,
Thank you for your answer!
I tried to start and stop/start the service from ST06, but it doesnt work. Here is a content og the log - any ideas how i could start the collector without booting the server?
HWO description
SAPOSCOL version COLL 20.95 701 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
compiled at Feb 24 2009
systemid 562 (PC with Windows NT)
relno 7010
patch text COLL 20.95 701 - 20.64 NT 07/10/17
patchno 32
intno 20020600
running on L5183N01 Windows NT 6.0 6002 Service Pack 2 16x AMD64 Level 6 (Mod 26 Step 5)
PATCHES
DATE CHANGELIST PLATFORM PATCHTEXT
20081211 1032251 ALL Option -w support. Removed SizeOfRecord warning rt 130.
20090114 1036522 UNIX Log file permissions: 664.
20090203 1041526 UNIX Add. single instance check.
20090210 1042962 ALL Continue after EWA HW XML generation failure.
09:46:39 12.04.2010 LOG: Profile : no profile used
09:46:39 12.04.2010 LOG: Saposcol Version : [COLL 20.95 701 - 20.64 NT 07/10/17]
09:46:39 12.04.2010 LOG: Working directory : C:\usr\sap\PRFCLOG
09:46:39 12.04.2010 LOG: Allocate Counter Buffer [10000 Bytes]
09:46:39 12.04.2010 LOG: Allocate Instance Buffer [10000 Bytes]
09:46:40 12.04.2010 LOG: Shared Memory Size: 118220.
09:46:40 12.04.2010 LOG: Connected to existing shared memory.
09:46:40 12.04.2010 LOG: MaxRecords = 1037 <> RecordCnt + Dta_offset = 1051 + 61
09:46:55 12.04.2010 WARNING: WaitFree: could not set new shared memory status after 15 sec
09:46:55 12.04.2010 WARNING: Cannot create Shared Memory
thanks!
Soren
Edited by: Soeren Friis Pedersen on Apr 12, 2010 9:49 AM -
Boot system flash: does not appear on 2960 running config
Dear friends,
On the 2960, i have two .bin images and i am pointing to the latest one.
However, the boot system flash: command along with the new image does not appear in the running config but it appears in the
show boot command.
t3a.sidradc.dmz.01#dir flash:
Directory of flash:/
2 -rwx 2131 Jan 3 2010 07:30:45 +03:00 private-config.text
4 -rwx 8040418 Mar 1 1993 05:31:51 +03:00 c2960-lanbasek9-mz.122-50.SE3.bin
5 -rwx 676 Jan 3 2010 07:28:50 +03:00 vlan.dat
6 drwx 128 Mar 1 1993 03:02:32 +03:00 c2960-lanbasek9-mz.122-44.SE6
546 -rwx 4120 Jan 3 2010 07:30:45 +03:00 multiple-fs
548 -rwx 9001 Jan 3 2010 07:30:45 +03:00 config.text
32514048 bytes total (21123072 bytes free)
t3a.sidradc.dmz.01(config)#boot system flash:c2960-lanbasek9-mz.122-50.SE3.bin
t3a.sidradc.dmz.01(config)#exit
t3a.sidradc.dmz.01#wr
Building configuration...
[OK]
t3a.sidradc.dmz.01#sh boot
BOOT path-list : flash:c2960-lanbasek9-mz.122-50.SE3.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
NVRAM/Config file
buffer size: 65536
Timeout for Config
Download: 0 seconds
Config Download
via DHCP: disabled (next boot: disabled)
t3a.sidradc.dmz.01#sh run | inc boot
boot-start-marker
boot-end-marker
Are you aware of any reasons for this?
Thanks a lot
Gautamand the other being the issue where IOS can return the prompt before it's done unpacking the files
Ok, now what EXACTLY is the appliance and IOS version? The only time I know of this bug is the Metro Ethernet (ME) switches and when the current appliance is upgraded FROM an IOS version 15.2(1)S.
But there is a "workaround" which Cisco doesn't want to publish (don't ask me why not): Use "archive tar /x" and, optionally, delete the old IOS sub-directory.
Personally, I wouldn't recommend anyone using the "copy the BIN file" method unless you know what you are doing or you've put extra measures in place. The "archive /x tar" and/or "archive download-sw" was developed so that it could be automated and the operator can see the result at the end. The "copy the BIN file" method doesn't give anyone a result whether or not the file was copied or not or was the file copied completely.
Regularly, I would upgrade our switches (2960/2960S, ME-3800X, 3560E/3560CG, 3750X) fleet using the "archive download-sw" method and I don't use scripts. I just copy-and-paste the command. So far, since 2009, I've "lost" only 6 switches when I upgraded the switch to upgrade the wrong file (another IOS bug on it's own) and I had to physically show up and upgrade using ROMmon. Every time I would upgrade, about 900 switches (some in a stack), it would take me about 4 days. Even though I work with three guys who's very good at almost any scripting but we've come to a unanimous conclusion NOT to use scripting.
Moving on, if "copy the BIN file" is still a preferred choice, I would like to know how do you go about verifying the file was copied completely? Whenever I resort to the "copy the BIN file", I ensure the file copied is complete by verifying the MD5 hash value against the MD5 hash value found in the Cisco website. Trust me, adding this additional "layer" of security saved me doing ROMmon upgrade so many times. -
Hi All,
The saposcoll is always getting terminated with a error message "shared memory not available".We have tried all possible remedies but it was of no use, There is no version mismatch and and there is also one saposcoll service running on that host.The problem is coming after we have upgraded our system.
Please suggest me some suitable notes or any solution for it as it is a production server.
AshwiniHi,
Please have a look at below link.
SAPOSCOL not running ? (shared memory not available )
Also Check SAP Note 548699 - FAQ: OS collector SAPOSCOL.
Hope this helps.
Thanks
Sushil -
SAPOSCOL not running:Shared Memory not available
Dears,
On my PI 7.1 server when I go to ST06 I get message:
SAPOSCOL not running:Shared Memory not available
Please suggest.
Shivamfew suggestions
FAQs on saposcol - http://www.saptechies.com/os-collector-saposcol/
SAP Note 165188 - saposcol not running on AIX-DB2
SAP Note 548699 - FAQ: OS collector SAPOSCOL
SAP Note 103135 - DB2-z/OS: Installing saposcol manually
Regards
Sekhar
Maybe you are looking for
-
Is there a better way to do this with Flash?
I am new to Flash but am slowly teaching myself via Lynda.com etc I have an image that I have added to a website via a content management system and want to make certain areas of that image into links to other sites. I found this page that does the k
-
How to deploy a web service into a WAS JAVA
hello, we have Netweaver 2004s AS Java with SP 11. I need to know how we can deploy or start up a web services into WAS. It is possible? how? Any document to help me? please thanks! Gaby
-
Reversing the MIGO when MIRO exists
Dear Expert, The issue is 1. I have created one PO with third party freight condition(Delivery Cost) 2. Done MIGO 3. Booked MIRO only for delivery cost 4. Now i am able to reverse the MIGO without reversing the MIRO of delivery cost. I just want this
-
Cannot slice values with quotes sign
Hi all, for some unknown reason, I cannot slice values with quotes sign on a slicer. It does not work on any of the computers in my workplace! Why is that? How can I fix this? I work with Excel2010 Thanks, Marina
-
Boilsoft Video Converter has excellent capacities to provide you with a variety of practical functions. This wonderful video converter allows you to preview video before it gets converted, add watermark, subtitle to your coverted video, convert a bat