Running Crystal Report 10.2 on windows server 2008

Hello, Everyone,
I am migrating my ASP.NET application from windows sever 2000 to windows server 2008.
I have Crystal reports that was converted from version 9.1 to version 10.2, and application is using ASP.NET 2005.
I have installed on the server .net framework 3.5 and 4.0. Also Installed CRRedist2005_x86.msi u2013 Crystal Report redistributable package for .net Framework 2.0. To my understanding i dont need to install .net framework 2.0 since i have 3.5 installed.
Web app is running fine, but when i am running Cryastal Report I see the page that displays report, it is up for a second or two and when report is starting to generate page is closed. No errors.
Does anyone experiencing the same problem running CR 10.2 on windows server 2008? Am i missing something?
Can somebody help me?
Thanks,
Michael

CR 10.2 is not supported on WIN 2008. See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki for more details.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

  • Crystal Reports 10 Compatibility with Windows Server 2008 R2

    Hello I'm a developer and I'm in the process of migrating my ASP.NET application that uses crystal reports 10 from a win2k3 server to a win2k8 R2 server.
    First of all, is CR 10 compatible with windows server 2008 R2?
    The application is up and running on the new server, the only thing that fails is the reports. I get the following error message:
    Error in file ....c:\windows\temp\{TEMP_FILE_NAME}.rtp
    Failed to create the Crystal Query Engine.
    This occurs at report.load(..)
    I did already grant NETWORK SERVICE access to Temp and ran the CR redistribute msi that came with Visual Studio 2008 - CRRedist2008_x64.msi.
    Please help

    YESSSS!!!! IT WORKS!!
    Finally, after days of installing, uninstalling, setting permissions, crawling through process monitor output.. I finally have it working.
    For anyone with the same problem, here's what worked for me:
    I had to use the 32-bit runtime
    set application pool to 32-bit
    grant the following permissions based on the different errors listed below:
    Error in File UNKNOWN.RPT
    - Give NETWORK SERVICE list permission on C: Drive, run a report, then remove NETWORK SERVICE from the list (weird, but works, and I had to do this every single time I setup Crystal Reports on a new computer so far).
    - You might also have to set correct permission on 'Temp' if u get still get this error.
    Error in file ....c:\windows\temp.rtp
    Failed to create the Crystal Query Engine
    - Grant correct permission to C:\Program Files (x86)\Business Objects (your path may vary)
    (For me it was giving Users Modify permission to Business Objects folder)
    Unknown Query Engine ErrorError in File C:\Windows\TEMP\.rpt:
    Unknown Query Engine Error
    - Switch application pool to 32-bit.
    - Make sure Crystal Reports Runtime is 32-bit (CRRedist2008_x86.msi)
    Thank you guys so much for all your help and sticking through this with me.

  • Crystal Reports XI R2 and Window Server 2008 Hyper-V environment

    Hello,
    Is there any known issue that Crystal Reports XI R2 running on Window Server 2008 Hyper-V enviroment?
    I tested on Development Server which is Window Server 2008 and it is working fine but when tested with another servers which are in Hyper-V enviroment and ASP.NET program keep crushing.
    I got the below error on my event log:
    Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x03976ce8, process id 0x%9, application start time 0x%10.
    Thanks,
    Yin

    Hi Yin,
    Hyper-V I assume is the Hyper threading Intel and others enabled correct? Should not make a difference other than performance. You are still using 1 CPU so the cycles are being split between multiple programs. Not really an advantage.
    Try using ProcessMonitor and search on access denied to see what is having the problem.
    Other issue is CR XI R2 is not supported on windows 2008, or at least you should be running Service Pack 6 to at least get Windows 7 and Vista support, which is about the same as Windows 2008.
    Go to our download page and install SP 4 full build and then SP 6. ( assuming you don't have any SP's installed ) or look in the download area and download all of the patches from SP 4 as well as the distribution files for how ever you are deploying your application.
    Thank you
    Don

  • Regarding crystal report runninv problem in windows server 2008

    My name raja gupta.i want to clarify my issue.I used crystal reports 2005(10.0 version).I am accesing that reports in windows server 2008(64 bit) operating system.But i am unable to see the reports,reports was not working and not opened.Give me reply asap.
    Thanks & Regards,
    Raja.

    I would advise to check if windows server 2008(64 bit) is listed as a supported platform.
    If you need urgent support, you can always contact Customer Interaction Center (CIC) and purchase a Single Support Case.
    The CIC contact information you can find in the following SAP note:  
    Note 560499 - Global Support Customer Interaction: Telephone/fax/e-mail
    u2026.
    Business Objects customers:
    Contact information for Business Objects # new support telephone numbers, all numbers available 24 hours 7 days a week
    If the toll-free telephone number listed below is not available for your Customer Interaction Center or Support Advisory Center, call the following emergency numbers:
    - EMEA Region:                                  +353 91 404395
    - North and Latin America Region:               +54 11 5129 3717
    - China, Hong Kong, Japan, South Korea
      Singapore, Taiwan:                              +86 411 3963 1129
    - Malaysia, Philippines, Thailand:               +91 80 4139 9216
    - Australia, New Zealand:                        +61 2 9935 4660
    America
    CIC & SAC Center     Contact information
    USA     T: 1 866 8907686 (toll-free)
         E: [email protected]
    Canada     T: 1,866 6603577 (toll-free)      
         E: [email protected]     
    APJ
    CIC & SAC Center     Contact information
    Australia     T: 1800 081 923 (toll-free)      
         E: [email protected]     
    China CNC     T: 10800 7490097 (toll-free)      
         E: [email protected]     
    China Telekom     T: 10800 4900088 (toll-free)      
         E: [email protected]     
    Hong Kong     T: 800 964 865(toll-free) or +852 25391948           
         E: [email protected]          
    India     T: + 91 80 4139 9217           
         E: [email protected]          
    u2026

  • Crystal Reports XI R2 on Windows Server 2008

    How can I deploy the CR runtime and run my reports made in CR XI R2 SP4 on Windows 2008 Server, given that the server is a 64 bit OS
    Some of my clients are planning to move my application on Windows 2008.
    MP

    Hi,
    Below are the Supported Operating Systems for Cystal Reports Server XIR2 SP2::
    [Windows Server 2008 is not supported with CR Server XIR2 SP2]
    Desktop Products :
    u2022 Windows 2000 SP4 Professional
    u2022 Windows XP SP1 Professional
    u2022 Windows XP SP2 Professional
    u2022 Windows Vista (All Editions)
    u2022 Windows 2000 SP4 Advanced Server
    u2022 Windows 2000 SP4 Datacenter Server
    u2022 Windows 2000 SP4 Server
    u2022 Windows Server 2003 Datacenter Edition
    u2022 Windows Server 2003 Enterprise Edition
    u2022 Windows Server 2003 Standard Edition
    u2022 Windows Server 2003 Web Edition
    u2022 Windows Server 2003 SP1 Datacenter Edition
    u2022 Windows Server 2003 SP1 Enterprise Edition
    u2022 Windows Server 2003 SP1 Standard Edition
    u2022 Windows Server 2003 SP1 Web Edition
    Server Products :
    u2022 Windows 2000 SP4 Advanced Server
    u2022 Windows 2000 SP4 Datacenter Server
    u2022 Windows 2000 SP4 Server
    u2022 Windows Server 2003 Datacenter Edition
    u2022 Windows Server 2003 Enterprise Edition
    u2022 Windows Server 2003 Standard Edition
    u2022 Windows Server 2003 Web Edition
    u2022 Windows Server 2003 SP1 Datacenter Edition
    u2022 Windows Server 2003 SP1 Enterprise Edition
    u2022 Windows Server 2003 SP1 Standard Edition
    u2022 Windows Server 2003 SP1 Web Edition
    Please revert in case of any further queries.
    Regards,
    Deepti Bajpai

  • Support for Crystal Report XI runtime on Windows Server 2008 R2

    Hi all,
    I was wondering if Crystal report XI runtime is supported on Windws Server 2008 R2.
    I've found this url http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e06b8953-a62b-2d10-38b9-ca71f747e2b1?QuickLink=index&overridelayout=true&59511066859035
    We are develping with .Net framework 2.0.
    Thanks in advance.
    Regards.
    Roberto.

    Hi Roberto,
    By 'Crystal report XI runtime' if you mean CR 11.0, then it is not supported with Windws Server 2008 R2.
    See the compatibility chart.
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=56787567
    The link you have referred is for Crystal Reprots for VS 2010 / 2012 / 2013 which is the lates version of CR which provides the SDK.
    http://scn.sap.com/docs/DOC-7824
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Crystal Report Export not working in Server 2008

    Hi
    Please Help..
    I am Using Crystal report Report 9 with VB 6 and SQL Server 2008. All my Client PC s (Windows XP SP3) are able to export the reports in any format but with my SERVER - (Windows Server 2008 (32 Bit)) it isn't possible. The Button is very much enabled
    but when I click on it, Nothing happens.. Please Help... 

    Hi,
    I would like to suggest you try to run SAP Crystal Reports under Compatibility Mode to check if it works.
    Run in compatibility mode with administrative privilege
    ================================
    1. Right-click the .exe file of the SAP Crystal Reports program and choose
    Properties.
    2. Switch to the
    Compatibility tab.
    3. Please check the
    Run this program in compatibility mode for and choose
    Windows XP (Service Pack 3).
    4. Check the
    Run this program as an administrator box under the
    Privilege Level.
    5. Click
    Apply, click OK.
    Note: If the option is unavailable when running this program as an administrator, it means that either the application is blocked from always
    running elevated, the application does not require administrative credentials to run, or you are not logged into the computer as an administrator.
    If it does not work, it is high recommended to contact your local SAP Support Engineers for further assistance. They are more familiar with their own
    product.
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error starting forms and reports manageed servers on windows server 2008

    Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
    [2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
    [] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
    [APP: em] Falta la configuración de registro o no es válida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
    any suggestions?
    weblogic 10.3.4
    forms 11.1.1.4
    windows server 2008 x64
    JDK :java 6u30 x64

    delete all, re-install all... ok

  • Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

    I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
    IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
    and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

    Hi,
    Check the below thread also:
    http://scn.sap.com/thread/1634856
    Thanks,
    DJ

  • Crystal Reports XI  stopped working error message on a Windows Server 2008

    We recently installed Crystal Report XI  in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
    "Crystal Reports has stopped working"
    Problem signature:
    Problem Event Name: BEX
    Application Name: crw32.exe
    Application Version: 11.0.0.1282
    Application Timestamp: 422d5c77
    Fault Module Name: StackHash_1fc1
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 7ef2fbfc
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.272.7
    Locale ID: 1033
    Additional Information 1: 1fc1
    Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
    Additional Information 3: 2f92
    Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
    Any recommendation on what is causing this error?
    Thanks,
    Luis

    Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
    Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
    The error I'm getting when trying to start the service is:
    The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
    I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

  • Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

    Hi,
    Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
    Rock
    Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

    Thanks all for your replys.
    As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
    Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
    ' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
    When will be 64 bit runtimes for CR 08 will be available?
    Thanks

  • Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

    Hi Forum,
    I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
    The application does not run and throws the following error in the event log.
    Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
    The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
    Please suggest me if i am missing something. Please let me know how can i debug this issue?

    Hello,
    Crystal reports XIR2 is not supported on Windows server 2008.
    Check the supporting platforms guide here.
    [Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
    Thanks,
    Bhushan.

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • Windows Server 2008, IIS7, SQL Server 2005 - Will this work?

    Hi,
    Not super concerned about it being supported at this point, BUT, can I run/install CR XI SP2 on Windows Server 2008, IIS7, SQL Server 2005?
    I've reference the System Requirement stuff and it was written before Server 2008 was released.
    If it's possible, any help on what to install/not install would be great appreciated.
    Thanks,
    Mike

    Try it. If it works great. As you are using ASP, your app must be using craxdrt.dll. This dll has been retired and no longer ships with CR 2008, so even when the next SP for CR 2008 releases, it will be of no use to you. If the ASP app does not work on the server, you may want to post your query to the Legacy Application Development SDKs forum:
    SAP Crystal Reports - Legacy SDKs
    and see if anyone can help.
    Other than that, the only option will be to go to .NET once SP 1 releases for CR 2008, or use CR 10.5 which bundles with .NET 2008.
    Ludek

  • Management Pack for Windows Server 2008 Enterprise SP1

    Hello,
    I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
    I have installed the normal management packs:
    On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
    What can I do?

    Hi Journey Tinoco,
    Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
    counter you want to monitor on windows server 2008 servers VIA SCOM.
    Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
    The one which you are opened is the health explorer view which is not showing much details.
    Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
    Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
    the Run button on the left to you will get the report as below.
    Please note: If the below report is what you are looking for is not available in your SCOM's  reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
    it from the below link.
    http://www.microsoft.com/en-in/download/details.aspx?id=9296
    Hope this helps you.
    Gautam.75801

Maybe you are looking for

  • White Screen- New Hard Drive Same issue

    I had a white screen. The MacBook Pro would do nothing. The only way I could get it to work was by pressing option when powering on but even then I tried everything reinstalling Lion. When I tried to reinstall lion it would pop up with an error messa

  • Script for copy and compile objects from one schema to another

    Hi, I have 2 schemas like schema1 and schema2 in both schemas i have same procedures/function like p_test1 .If i modify a procedure in schema1 i want same modifications in schema2 so i want a script to apply these changes to schema 2. except bellow p

  • Is there a known security vulnerability where "Firefox" under desktop icon is changed to "\'/.;|" ?

    I went to use Firefox this AM and noticed the changed Name under the Firefox icon. At first I thought it might have somehow was corrupted until looking at the symbols- \'/.;l -and thinking maybe there was something more to it. I'm running Mac OS X an

  • FND-INVALID APPLICATION. (Could not lookup message no database connection)

    I have a strange problem. I am setting up jDeveloper and trying to create a new OAF project and got the attached FND-INVALID-APPLICATION error. I try to launch the tutorial and it worked. I tried to create a different project under the tutorial works

  • Midi  start/stop signals

    does any body know if you can get garageband to send/recieve midi start/stop signals. i.e. I want to hit record on garageband and have it signal my drum machine, synth, sequencer or whatever to play