Running Crystal Reports
How do I restrict users to being able to run Crystal Reports via "schedule" only? (version X1)
You can use WEB.SHOW_DOCUMENT('URL of the Crystal Reports Server and pass the necessary parameters.');
Similar Messages
-
Error when running crystal report
i saw the error in log file 'Only TrueType fonts are supported. This is not a TrueType font' and 'Error while running Crystal report'
Help me to fix this problem.Thanks inadvanced.
I used some software developed in vb6.It changed some system font when running :D.
i want to run both that soft and sap.Hi,
Please refer to the link, [Re: CR XI R2, Crystal Report Viewer Opentype Font not supported|Re: CR XI R2, Crystal Report Viewer Opentype Font not supported].
What is the version of your crystal report, we will try to apply some service packs.
Regards,
Clint -
Unable to run Crystal Report due to error code called "database code:102
I have created a View on the SQL server and Now I am trying to run crystal report using that view. However, I get Database Vendor Code error message 102. Need your help, How can I ran a report using SQL veiws in Crystal?
thanks!
MansoorHi,
The report is getting an error code 102 from the database driver.Try with searching the RDBMs type for error code 102, to narrow down the issue.
If data from database is failed to retrieve then,there are several causes of this error like disconnected tables, tables that are not connected properly.
Run your query in SQLcon32 and check that getting accurate output or not.
Regards,
Shweta -
Error While running crystal report
Dear All,
i have some crystal reports in SAP.while opening any crystal report its through some error like "Error While running crystal report ".
Kindly suggested me how to do this .
Thanks&Regards,
P.PratapHi All,
Thanks for your reply,
already i close this Issue.
they have one addon for crysatl report .so it show error like Error while Running crystal report
thanks&Reagrds,
P.Pratap -
Error while running Crystal Reports from application
Hi,
I am getting the below error when I try to run Crystal Reports from my application.
There are no Page Servers connected to the Cache Server or all connected Page Servers are disabled or all connected Page Servers are not part of the specified server group. Please try to reconnect later.
I am able to preview the reports in CMC and Infoview, but when I try to run the same report via my application the above error pops up.
Sometimes I get a different error:
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
Looks like some configuration settings are missing/ corrupted.
I tried to look in a number of websites... tried few workarounds, but none seems to be working.
Any help is highly appreciated.
Meena
Edited by: meenakshitikoo1 on Apr 19, 2011 12:46 PMCheck the following SAP note
https://service.sap.com/sap/support/notes/1032461
Regards,
Stratos -
Issues in running crystal reports 2013 with SOQL as a datasource
Hi Experts,
We have some crystal reports created in CR 2008 with command as a data source and all the commands are written in SOQL pulling data from SFDC, now when I open and run those reports in crystal report designer 2013 it is giving below errors:
Failed to retrieve data from the database.
Details: 42S22:[Simba][SQLEngine] (31400) Qualified column could not be bound: c.Investor__r.Relationship_Formula__c. [Database Vendor Code: 31400 ]
Failed to retrieve data from the database.
Details: 42S22:[Simba][SQLEngine] (31400) Qualified column could not be bound: k.Account_Relationship__r.PE_Priority__c. [Database Vendor Code: 31400 ]
We are running crystal reports in both the version with system admin user who has access to all the objects in SFDC. It works well for CR 2008 but not for CR 2013, means relationship is not an issue.
We have done some analysis and found that if the field in query contains two periods (.) it is not recognising that field, if we remove that field from query, CR 2013 takes that as a valid statement.
Any help or suggestions on this issue would be a great help.
Regards,
ApoorvHi Apporv
Please check your database documentation for error 31400.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Running Crystal Reports in background mode
Ist there any way to run Crystal Reports against R/3 (ECC) in background mode instead of as a dialog user? We're having timeout issues since the dialog timeout is set to 30 minutes. We have several reports that run quite a bit longer than that.
Update: I just answered my own question. Pages 58-59 of the install and configuration guide shows you how to do this.
Edited by: Mike Garrett on Jan 22, 2009 4:57 PM
Edited by: Mike Garrett on Jan 22, 2009 8:41 PMHi,
SIA should be all you need because it is starting the other processes as well. Keep in mind that if you do that that most likely all you reports will run in batch mode (also those called on demand.)
Ingo -
Run crystal report through BI, can't locate par file on BOBJ server
Attempting to run crystal report through BI iView.
Followed steps here: http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateBOEXI3.1IntegrationKitIViewTemplateintoSAPEP+Portal
successful until we try to locate the par file:
com.businessobjects.pct.masteriview.par
Is there something we need to install to be able to load this file, or is there somewhere we can download.
As of now, stopped b/c can't find
com.businessobjects.pct.masteriview.parThanks Ingo, would this be the correct file to download and install?
Download BusinessObjects XI 3.1 Java Portal Integration Kit - WAR 10 MB
Located here:
http://www.sdn.sap.com/irj/boc/enterprise;jsessionid=(J2EE3414800)ID1586935850DB11532971180627469992End?rid=/webcontent/uuid/503988db-58c5-2b10-f79d-cb96700417f9
then click Download BusinessObjects XI 3.1 Java Portal Integration Kit - WAR 10 MB
to get here:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f0c30ff1-4e75-2c10-a385-8eff81c946aa
We currently have BOBJ set up, CMC/INFOVIEW, and crystal linked to SAP BI...so I thought we'd installed everything we need, I guess this is more for portal...b/c now our goal is to see what crystal reports look like in BI portal instead of infoview.
thanks a lot,
matt -
When deleting running crystal report from BOE CMC, it leaves Oracle thread?
hi, Yesterday, we discovered an anomaly. From BOE's CMC, I deleted a running Crystal Report instance. I believed that this would "cancel" the running report. However, later, it produced a message. It apparently kept on running in Oracle until it finished.
My question: when I delete a job from BOE's CMC, what else must we do to cancel it from continuing in Oracle? Apparently, it continued to be a "thread" in Oracle.
What additional steps should I take or are there any setup steps? Thank you.
Our BOE version (copied from the CMC about screen) is: Product: 12.1.0 © 2008 Business Objects (or Product Version: 12.2.0.290).
Thank you,
DeanI'd just been trying instructions in SAP note: 1407795 when this reply came through.... I can confirm this worked for me.
The error codes I found in the Windows Event viewer, both yesterday and today are listen below:
RCIRAS0240
RCIRAS0622
RCIRAS0567
RCIRAS0244
The issues that are described in this post and the ones I have seen first-hand when the screen hangs when viewing this report on-demand, or the report running for a longer than expected time when scheduled, are covered by the above error codes.
A known cause of the issues you are experiencing is that when these particular reports were created, a network printer was specified as the default printer, this printer may now either be unavailable, IP address may have changed, etc.
There do seem to be two options available:
Option 1 - Remove the printer driver dependency
Open this report in the Crystal Reports Designer.
Under the File menu, click on Page Setup.
Select the No Printer option.
Option 2 - Add or correct the printer that the report is designed with
Open the Report in the Crystal Reports Designer
Under the File menu, click on Page Setup
Make not of the printer that is listed in the Page Setup dialog
Log on to the BusinessObjects Enterprise Server that houses the Crystal Reports Processing Servers.
Make sure you log in as the user account that runs the Crystal Reports services. This is generally the account that runs the Service Intelligence Agent (SIA)
Go to Control Panel and click on Printers
Ensure that the same printer is configured on the server that is used in the Crystal Report
In the printer already exists, try removing it and re-adding it. -
Error when run crystal report viewer page
Hi I created form using vb 2008 contains crystalreportviewer and in load sub I wrote the following code to show the report:
Dim r_select As String
Dim MyReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
r_select = "Select Innovative_Form.* from Innovative_Form"
Dim da As OleDbDataAdapter = New OleDbDataAdapter(r_select, System.Configuration.ConfigurationManager.ConnectionStrings("ConnectionString").ToString())
Dim da33 As New System.Data.DataSet
da.Fill(da33, "DataTable1")
MyReport.Load(Server.MapPath("CrystalReport.rpt"))
MyReport.SetDataSource(da33)
Me.CrystalReportViewer1.ReportSource = MyReport
Me.CrystalReportViewer1.DisplayGroupTree = False
Me.CrystalReportViewer1.DataBind()
Me.CrystalReportViewer1.ShowFirstPage()
End Sub
when run I got the following error
Server Error in '/Innovation Last Version-10-1-10' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 34:
Line 35:
Line 36: Dim da As OleDbDataAdapter = New OleDbDataAdapter(r_select, System.Configuration.ConfigurationManager.ConnectionStrings("ConnectionString").ToString())
Line 37:
Line 38:
Source File: C:\Users\kisruser\Desktop\PROJECTS\Innovate Project\Innovation Last Version-10-1-10\Report.aspx.vb Line: 36
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Report.Page_Load(Object sender, EventArgs e) in C:\Users\kisruser\Desktop\PROJECTS\Innovate Project\Innovation Last Version-10-1-10\Report.aspx.vb:36
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +50
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.4200; ASP.NET Version:2.0.50727.4016
SO WHAT IS THE PROBLEM?????What version of CR are you using?
What CR updates are you using?
See sample apps here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
in particular check out vbnet_win_pass_dataset_main_sub.zip
The [Crystal Reports for Visual Studio 2005 Walkthroughs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] will also be good to look at.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup -
Deadlocked error message when running crystal report
Hi All,
I need a bit of guidance as to the following problem.
Seems there is a lock being created in SQL when running some crystal reports.
When trying to run a report the following message is displayed:
Database connection Error L 'ADO Error Code: 0x
Source: Microsoft SQL Native Client
Description: Transaction (Process ID 302) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
SQL State: 40001
Native Error: [Database Vendor Code: 1205 ]'
The error is happening intermittently when refreshing the report. It does not seem to happen when no users are using the system.
Is there any way to stop this from happening? Or is this some kind of limitation with crystal and how it accesses the database?
Many Thanks,
MattHi Matt
I have had this problem with long running queries as well. I ended up doing the main part of the query in a view using WITH (NOLOCK) for each table and then reporting on the view.
This had extra benefits of making the report much simpler and often making the query more efficient and easier to test as well.
Rob -
Error when run crystal report with store procedure in JSP
I try to run report which is developed by crystal report XI and store procedure (SQL 2005) with JSP.
But it occurs error that is "com.crystaldecisions.reports.reportengineinterface.JPEReportSource - failed to process getPage request: No results were returned by the query."
How can I do for solving this problem? Pls, help me !!!!!
(In other report which is not used store procedure I can run fine.)
Message was edited by:
Bonds_IdentityWhat version of CR are you using?
What CR updates are you using?
See sample apps here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
in particular check out vbnet_win_pass_dataset_main_sub.zip
The [Crystal Reports for Visual Studio 2005 Walkthroughs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] will also be good to look at.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup -
Runtime errors "Raise_Exception" occur when running crystal report
Dear all expert,
I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
Thank You.Hi Ingo,
I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
The readme for my transport file are as below:
There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
The dump "raise_exception" occur when in the Crystal Report Designer.
Thank You. -
Receiving Error when running Crystal reports with Images in WebSphere 6.1
I am designing a report with a sub report that displays images via (BLOBS). The images are between 10-20 kb in size and there could be up to 200 images in the report.
There are no problems when I run the report using Java 1.5 with Tomcat 5.5 server and JDBC connection (using ojdbc14.jar) to an Oracle 10g database.
It seems that if I attempt to run the same report on a WebSphere 6.1 environment, the below error is encountered (stack trace is below)
I am using Crystal 2008 (ver 12.0.0.683).
Based on the stack trace, I think it is either an IBM JDK javax.* package compatibility issue or the current version of Crystal reports (no service packs installed - current client environment) has a known issue with Websphere.
I searched the forums for any similiar issues but could not find one.
Could installing Service pack 3 solve this issue or is there another possibility?
Any assistance would be greatly appreciated.
Thank you.
Tony.
Stack Trace follows (Needed to trim due to size, trying to keep unique messges) *******
ERROR [pool-14-thread-1] c.u.p.e.g.c.GenerateCrystalReport [GenerateCrystalReport.java : 211] Generate Report: Template =
pusehk08\evm$\EVM REPORTS 5.7.2010\Staging\TEARDOWN_COM.rpt, ReportSDKException caught: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:237) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:147) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:128) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:111) [CrystalReportsRuntime.jar:12.2.207.916]
at com.utc.pw.evm2.generatereports.crystalreports.GenerateCrystalReport.generateReport(GenerateCrystalReport.java:152) [classes/:na]
at com.utc.pw.evm2.generatereports.ReportThread.run(ReportThread.java:144) [classes/:na]
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:678) [na:1.5.0]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:703) [na:1.5.0]
at java.lang.Thread.run(Thread.java:811) [na:1.5.0]
Caused by: java.lang.VerifyError: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
at com.crystaldecisions.reports.common.image.ImageUtils.a(SourceFile:901) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.image.ImageUtils.if(SourceFile:873) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.JavaImage.do(SourceFile:183) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.CrystalImage.createImage(SourceFile:50) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.formatter.objectformatter.FormattedBlobFieldObject.if(SourceFile:103) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.formatter.objectformatter.FormattedBlobFieldObject.<init>(SourceFile:57) [CrystalReportsRuntime.jar:12.2.207.916]
[CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.formatPage(SourceFile:236) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:96) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:247) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:642) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:223) [CrystalReportsRuntime.jar:12.2.207.916]
... 8 common frames omitted
2010-07-20 15:57:11,147 ERROR [pool-14-thread-1] c.u.p.e.g.ReportThread [ReportThread.java : 233] Attempt to generate report TEARDOWN using
pusehk08\evm$\EVM REPORTS 5.7.2010\Staging\TEARDOWN_COM.rpt for E733570-01 failed: Generate Report: Template =
pusehk08\evm$\EVM REPORTS 5.7.2010\Staging\TEARDOWN_COM.rpt, ReportSDKException caught: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;, REPORTSDKEXCEPTION
2010-07-20 15:57:11,147 ERROR [pool-14-thread-1] c.u.p.e.g.ReportThread [ReportThread.java : 238] Exception was caught trying to build report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
Edited by: Liro9999 on Jul 21, 2010 1:55 PMThank you for your reply.
The answer to your question concerning if Websphere is a clean install is no. The client has other applications running on that server. We do not have access to that server other than the log files and I requested information as to what other applications are on the server.
We did try adding a known working version of the IIOMetadata class in the ear file and deploying it in the hopes that class will be loaded before using any other version. Unfortunately, we receive the posted errors. Which may mean that a different version of the class has already been loaded in memory and that is the one being accessed. A request would have to be made to the client for a shutdown and restart of Websphere in determining if that may be the case. Since there are other applications running, coordination and communication to the other application owner will need to be done first.
Any additional ideas will be appreciated.
Thank you.
Tony. -
Connection to Enterpise RAS Server to run Crystal Reports from Externaltool
Hi,
I am new to SDK, we have this situation
We are using Enterprise BO XI 3.1 SP2, and we use a Java based tool by an external vendor
that has Crystal reports and the vendor suggested to we use Crystal report embedded Report
Application server to run those reports.
The reports run successfully when we use Crystal report embedded Report Application server
and we are having difficulties with establishing connection to the RAS Server that comes
with the BO 3.1 Installation.
My questions are:
1) Is there a difference between connecting to stand alone RAS server and the Enterprise
server as the vendor insisted on by saying that their code looks for the RAS service name, but with
the enterprise version under the services there is only one service name CMC
2) what are the steps we need to take to establish the connection with enterprise RAS server
3) currently we are using RAS server has version 12.2.7.598 , Vendor Certified is 12.1.0.882
for the standalone server. Does the version cause any issues
Our direction is to go with the Enterprise BO XI 3.1 SP2 RAS server. Any help or suggestions is greatly appreciated
ThanksFirst thing to check is to determine that the RAS server command-line has specified the -ipport <port number> and that the Java code is calling the RAS server on that port.
Sincerely,
Ted Ueda
Maybe you are looking for
-
I purchased photoshop extended ver.12 a few yeas ago. Now, I got a new computer and I want to install the photoshop on that. I read some discussion and it said I need to download it from my purchase history or something, but I don't see anything ther
-
Can't create VM from template on iSCSI
Hello, I'm trying to create new VM from original Oracle template "OVM_EL5U3_X86_64_PVM_4GB" on iSCSI device without a success. Steps to reproduce: 1) /OVS is mounted as iSCSI block device 2) Original Oracle template is copied into /OVS/seed_pool/OVM_
-
How far does the visual code generation go.
Hi, I am new to Dreamweaver. However I have got so far that I can set up a site, create connection to my remote webserver and MySQL database and made my page display a value fetched from the database in a textbox, all created visually. But - if I now
-
I have a .band file on my desktop and i can't get rid of it
I can't delete it, move it or get info on it. What do I do?
-
Dear all, I've tried to reserved tables from my SQL 2005 from my designer..But there some strange problem which is the tables can not be reserved. Is there any setting that i was missed..?? Thanks. Rgds, Vien