Running CS5 with Mavericks 10.9.2, if I open a raw file into bridge from desktop any changes I make and click done ( i.e convert to b

CS5 issues with Mavericks 10.9.2

Thanks for getting in touch, part of my message was cut off! My problem is when I open up a raw file from desktop into bridge edit the raw image click done sending it back to the desktop as a raw file those changes do not appear on the desktop image. I've tried making an obvious change to an image making it b&w but again that does'nt appear on the desktop image, as mentioned I'm running CS5 with Mavericks 10.9.2.
Any advice would be greatly appreciated.
Phil.

Similar Messages

  • How to disable the printer's color management in Photoshop CS5 with Mavericks?

    Hi there, does anyone know how to disable the printer's color management in Photoshop CS5 with Mavericks? There doesn't seem to be an option. Could you help? Many thanks

    Just select Photoshop Manages Color, and the printer driver color options should be disabled.

  • I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

    I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?  Thanks!

    This is the last paragraph from my very first response to you, post #1 in this thread:
    …Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs.  [emphasis added]

  • Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

    i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

    Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade.  Try reinstalling Photoshop CS5.

  • TS3960 same problem with mavericks server app....tried additional ino solution did not work..any suggestions?

    TS3960: Server App or Server Admin can't connect to a newly upgraded Lion server
    same problem with mavericks server app....tried additional info solution did not work..any suggestions?
    All log in info is correct. will not accept worked fine on 10.8 just upgraded to 10.9 and will not work. deleted and reinstalled server app 3.0.1

    Figured it out....went to server...settings...check allow remote administration using Server

  • How can I process a Sony A7 RAW file into Photoshop CS5.

    How can I process a Sony A7 RAW file into Photoshop CS5.  I tried the file DNG converter 8.3, but it did not work.  I was able to download it, but upon reading the memory chip from Photoshop CS5, it reads the jpg files fine, but not the RAW files.  I thought the DNG converter 8.3 was the right file, but apparently it is not.  Perhaps I need to do something in Photoshop CS5 to initiate it, or place it in a particular directory.. Please help.

    First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version.  Always use the very latest version.  8.3 was simply the first ACR version to support your camera model, that's all.
    Note that the DNG Converter works only on folders, not on individual raw files.  Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
    I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
    You also need to make sure that CS5 is fully updated.  You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
    I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them, etc.,
    someone may be able to help you (not necessarily this poster).
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I had this video file and I was trying to flip it to a format that would work with iMovie.  It used to have the Quicktime image with it.  So, I assume it was a QT file.  But, somehow I've changed the file from a video to a folder.

    I had a video file and I was trying to flip it to a format that would work with iMovie.  It used to have the Quicktime image with it.  So, I assume it was a QT file.  But, somehow I've changed the file from a video to a folder.  I've tried to undo the action.  No luck.  I wasn't running my Time Machine.  So, I can't go back.  Help.  It's the only copy of this video.

    I've tried to undo the action.
    How?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    it's the only copy of this video.
    Where did you get the video from?
    From the pic I noticed that the folder is 841.9mb.  What's inside?  Or what happens when you click on it?

  • I can't preview RAW files in Bridge CS5 or open them in Camera Raw

    I've been using Photoshop CS5, Bridge and Camera Raw 6.7 with no problems whatsoever.  I recently upgraded the OS on my MacBook Pro to 10.8.5 and can no longer preview RAW files in Bridge, or open them in Camera Raw. 
    I've downloaded the Adobe DNG converter, but would much prefer to using my existing workflow if possible.
    Any suggestions?  Thanks in advance for any help!

    Adobe doesn't support CS5, an when I spoke to Apple, I was told that this is a known issue with OS 10.8.5 and that they're working on a patch.  In the meantime I'm using Adobe's DNG as a workaround.
    Have not heard before of this Known Issue, also find it hard to believe being true. But can't test my self because I only have CS6 and CC installed and always use Photodownloader to convert to DNG upon import. I have just installed the 10.8.5 update and checked in Bridge CC pointing to an attached card reader. no problem in showing the CR2 thumbs, it works as always and as expected.
    To my knowledge Bridge CS5 is already 64 bits and I can't think of any valid reason why an OS update would cause this problem so suddenly (but I'm not a technician I have to confess…)
    However, I would first try a check and repair permissions from Apple Disk Utility and also try Cocktail (good and cheap 3th party maintenance application for Mac) to clear caches and check permissions.
    Also try a new user account just for testing to rule out your current account as the culprit.

  • Having trouble opening camera raw files. Already downloaded Camera Raw Update for Photoshop CS5. I have a pc.

    Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.

    If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
    Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • I have reinstalled cc and vhen i want to open a raw-fil the picture opens in PS CS5 insted of in CC2014. How kan i connekt my raw files to CC2014

    I have reinstalled cc and when i want to open a raw-fil the picture opens in PS CS5 insted of in CC2014.
    How can i connect my raw-files to CC2014?

    You should have Bridge CC installed for CC 2014.
    In Windows, right-click on a raw file, and select "choose default program". Photoshop CC 2014 should be listed. Select it. "Always open this file with this program" should also be checkmarked.
    If CC 2014 is not on the list, look for the Browse button at the bottom and go to Program Files > Adobe > Adobe Photoshop CC2014 and click on the Photoshop CC 2014.exe to choose it and add to the list.
    In Bridge CC  Edit > Preferences > File Type Associations, look for your raw file type (CR2 or Nef) and select Photoshop CC 2014 deom the drop-down menu.
    Gene

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • I am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    i am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    Adobe Reader opens PDF files, nothing else.

  • HT4915 I share my iTunes accont with my kids. Many of the songs that they purchase, I do not want in my iphone Library, and I don't want them to play when I have my phone on shuffle. How an I remove unwanted songs from my phone library?

    I share my iTunes accont with my kids. Many of the songs that they purchase, I do not want in my iphone Library, and I don't want them to play when I have my phone on shuffle. How an I remove unwanted songs from my phone library withot affecting their devices?

    These are the downsides of a shared library because if you delete the song from your library it will get also automatically  deleted from your kids library. If you want to proceed then please follow this guide: https://support.apple.com/kb/HT4915

  • I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    ?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    pkg4ibm wrote:
    editing a url on the graphic...
    Not sure what you mean by that: is that URL in an image, or is it actual text?
    If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
    If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

Maybe you are looking for