Running driver on Windows XP SP1

I bought Sound Blaster X-Fi Sourround 5. and i have Windows XP SP. Is here any version of drivers for this kind of [email protected]

Yes. You should be able to do all of the above with an M series card. Anything that you can do with traditional daq and an E series board, you can do it with the M series using daqmx.

Similar Messages

Boot Camp: Driver Update (Windows Vista SP1)

I'm running a dual boot MBP Unibody w/ OS X & Vista SP1 64Bit
I don't like to install Boot Camp in the Windows OS due to the fact that updating drivers can be a pain when installed via boot camp. However, since I've done so, I've lost the functionality of some of the hardware.
If anyone can point me to a place where I could find drivers for the following I would greatly appreciate it. If I dont get a response, I will attempt to manually extract the drivers from the OS X Install CD.
Drivers Needed:
Express Card 34 Slot (The Drivers needed to get the slot to work, regardless of card)
Apple I Sight Built in Camera
IR Receiver
Trackpad
System Specs:
17" MBP Unibody
Windows Vista SP1 64Bit
2.93 / 4GB / 9600M GT
Sonnet Tempo eSata Express/34 Card (Rev. A) (I have the drivers for this, but the card isnt recognized when placed in the MBP)

you must run system 1 dvd where bootcamp is, open folders and there choose driver/64bit ..
no choose witch one you like and install with right-click as problem or something like this.
you take working with vista sp1 before and so on ..
i run 64bit win7 rc1 with all drivers exept isight.
for more look here:
http://forums.macrumors.com/forumdisplay.php?f=86

Can't run Windows 7 SP1 on large HDD (1TB)

Hi
I have just been directed to this very recent thread which is apparently now closed:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=275105
I have been having a virtually identical problem with a 1TB Toshiba disk - I have wasted days on it and tried at least 10 Windows 7 installs with varying behaviours/parameters/partitions and always the same end result. Can't run Windows Update.
I also tried installing Windows 7 SP1 from a DVD and that failed with a catastrophic error. I have also tried reformatting the drive, the WIndows Update repair tool (ha!) and installing while standing on my head reciting the works of Shakespear.
I gave up in the end and decided NOT to use it as a system disk at all. Instead I have installed Windows 7 on a smaller drive and am using the 1TB successfully as a secondary disk on the same PC and with a single 1TB partition.
Am I likely to experience problems - perhaps when the drive gets fuller and might I be wise to split it into 2 or more partitions?
I've only just bought the disk so I can send it back if it's going to be a waste of time.
Many thanks.

I guess you should check what problem you have with the desktop computer because the OS installation should work on any of the HDDs maybe your desktop requires a kind of RAID or SATA drivers but you should check this with your desktop PC

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

I am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?thanks jake

i am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?
thanks jake

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Itunes won't play any cd i put in the drive (macbook pro). I am running paralells with windows 7 and have disables media player so that didn't help

itunes won't recognize/play/import any cd i put in the drive. I am also running paralells with windows 7 and have disabled media player. any suggestions?

I have the same problem.
On launch itunes works fine.
If I let it play through a full album of songs unatended, when I return it respondes, but will not play music. I can browse my collection, but when i click the play button, press the space bar with a track selected or double cclick a track it will not play. A restart of iTunes solves the problem temporarily.

AirPort requires that your computer is running Windows 7 SP1 or newer, AirPort requires that your computer is running Windows 7 SP1 or newer

AirPort requires that your computer is running Windows 7 SP1 or newer, AirPort requires that your computer is running Windows 7 SP1 or newer

There is a version for earlier releases..
But you should update your win7 to sp1 anyway.

An ADO-based application that is compiled in Windows 7 SP1 or in Windows Server 2008 R2 SP1 does not run in earlier versions of Windows

I have read many articles about this problem, but I can't really see where the solution is for me.
I need to compile a Visual C++ program that uses msado15.dll. I have Windows 7 SP1 with Visual Studio 2010. I'm targeting Windows Server 2003, 2008 and 2011.
In the update text in this article: http://blogs.msdn.com/b/psssql/archive/2011/10/03/yes-we-made-a-mistake-and-are-finally-going-to-fix-it.aspx, it says that the fix is published as the article http://support.microsoft.com/kb/2640696. But at other places I
have read that you should not do this update and use the updated msado60.tlb file instead. Where can I find that file, or does it update from "Windows Update"?
I found a "fixed" file called msado60_backcompat.tlb on a blog, after using it it works on WinServer 2003 and 2008 but not on Windows Server 2011.
Any ideas how I should proceed to solve my problem?

Hi flindbys,
Thank you for posting in the MSDN forum.
Based on your description, I’m afraid that it is not the correct forum for this issue, since this forum is to discuss the VS IDE.
If this issue is related to that blog provided by you, my suggestion is that you could add a comment
here, I think you could get dedicated response there.
In addition, I also found some information like the following contents:
Thread handle leak -
http://social.msdn.microsoft.com/Forums/en/sqldataaccess/thread/68e23681-f6b5-4ed5-b963-e63e34eeac2f
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6f7a8ece-6937-4e7c-82ed-a3f6058be208/msado60backcompati386tlb-on-windows-7-iid-changes?forum=sqldataaccess
http://www.codeproject.com/Articles/225491/Your-ADO-is-broken
Whether this issue is related to the SQL Server Data Access? If it is related to it, maybe you could post this issue to this forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqldataaccess
Anyway, since it is not the VS IDE issue, I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

EPM 11.1.2: Foundation Services config fails on Windows 2008 SP1 server.

Hi,
I installed EPM 11.1.2 on Windows 2008 SP1, 32-bit. The installation succeeded (no errors in logs). However, when I run EPM Configurator to configure Foundation Services, it fails.
Environment:
EPM Server: Windows 2008 SP1 32-bit
RDBMS: Oracle Enterprise Edition 10.2.0.4 (running on remote AIX 5.3 TL 8 server)
Oracle Client: 10.2.0.4 (full client install)
The configtool.log (see below) indicates that the program cannot find the reg.properties file. I checked the server and this file does not exist. The log file also reports non-existing classpath entries (not sure if this is related). The registry.log file (see below) reports a jdbc driver error: java.sql.SQLSyntaxErrorException: ORA-00917: missing comma.
I submitted a service request with Oracle Support, but the support engineer said that installation and configuration errors are outside the scope of technical support.
Any ideas/suggestions would be greatly appreciated.
Thank you.
Configtool_Summary.log:
---- Product Configuration Summary.....
( May 9, 2010 6:55:58 AM ): ---- Hyperion Foundation Configuration......
( May 9, 2010 6:55:59 AM ): Pre-Configuration :: pass
( May 9, 2010 6:55:59 AM ): Common Settings :: fail
( May 9, 2010 6:56:03 AM ): Configure Database :: pass
( May 9, 2010 6:56:03 AM ): Deploy to Application Server :: fail
( May 9, 2010 6:57:03 AM ): Configure Oracle Configuration Manager :: fail
( May 9, 2010 6:57:08 AM ): ---- Workspace Configuration......
( May 9, 2010 6:57:08 AM ): Deploy to Application Server :: fail
Configtool.log:
[2010-05-09T06:49:19.927-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.oracle.preconfig.util.EpmLoggerPreConfigReporter] trace: Running preconfig checks...[[
Running EPM_ORACLE_HOME check...
EPM_ORACLE_HOME environment variable value: C:\Oracle\Middleware\EPMSystem11R1
JAVA_HOME environment variable value: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11
EPM_ORACLE_HOME check succeeded
Running .oracle.products check... .oracle.products check succeeded
Running Jars manifest check...
Time spent for manifests parsing: 55129 ms
Maximum jars depth achieved: 9, while restriction was: unrestricted
Parsed 439 manifests
Total jars and classpath entries encountered: 439
Total not-existing referenced classpath entries count: 28
Enumerating not-existing classpath entries:
Missing (depth 9) file C:\oracle\Middleware\modules\com.bea.cie.comdev.it_6.1.1.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config.it_6.1.0.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config.L10N_6.1.0.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config_6.1.0.0.jar referenced from C:\oracle\Middleware\utils\config\10.3\config-launch.jar referenced from C:\oracle\Middleware\wlserver_10.3\common\lib\pdev.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_jrf.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar
Missing (depth 5) file C:\oracle\Middleware\wlserver_10.3\server\lib\wlw-langx-L10N.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\wlw-langx.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_jrf.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar
Total classpath elements to check: 67
Check for C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\lib\hit-common.jar existence succeeded; file depth: 1
Check for C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\lib\hit-config.jar existence succeeded; file depth: 1
Jars manifest check succeeded
Running Environment variables check... Environment variables check succeeded
Running Windows system32 directory check... Windows system32 directory check succeeded
Preconfig checks passed! Going further
[2010-05-09T06:49:22.303-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01731] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.wizard.ConfigToolWizardLoader] Couldnt find proper class for wizard state: {0}, skipping...
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: {0}[[
com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Init Storage] has been started.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Getting registry instance] has been started.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05935] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Getting registry instance] has been ended. Execution time [0] sec.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Loading CT documents] has been started.
[2010-05-09T06:49:22.959-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01044] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.config.document.ConfigToolDocumentManager] Loading product descriptor from file C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\product\aps\11.1.2.0\default_aps_1.xml...
[2010-05-09T06:50:53.137-06:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 13] [ecid: 0000IXx7Zkm37E65zNd9iW1BtexF000004,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
[2010-05-09T06:50:53.137-06:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 13] [ecid: 0000IXx7Zkm37E65zNd9iW1BtexF000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: RegistryWizardState
[2010-05-09T06:51:41.437-06:00] [EPMINS] [TRACE] [EPMINS-00015] [oracle.EPMINS] [tid: 11] [ecid: 0000IXx7Zhb37E65zNd9iW1BtexF000002,0] [SRC_CLASS: com.hyperion.hit.wizard.AbstractWizardAction] Invoked action: navigation.next
[2010-05-09T06:51:41.453-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: {0}[[
com.hyperion.hit.registry.exceptions.RegistryException: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
     at com.hyperion.hit.registry.Registry.releaseInstance(Registry.java:2039)
     at com.hyperion.config.document.Storage.resetRegistryItems(Storage.java:811)
     at com.hyperion.config.document.Storage.resetRegistry(Storage.java:798)
     at com.hyperion.config.wizard.impl.RegistryWizardState$1.validate(RegistryWizardState.java:348)
     at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:504)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
     at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
     at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:149)
     at com.hyperion.hit.registry.Registry.releaseInstance(Registry.java:2030)
     ... 5 more
[2010-05-09T06:51:46.891-06:00] [EPMCFG] [WARNING] [EPMCFG-01863] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] Unknown server type: ORACLE
[2010-05-09T06:51:46.938-06:00] [EPMCFG] [TRACE] [EPMCFG-01864] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] HSS DB commit: serverType = ORACLE, host = fsdev21.jeffco.k12.co.us, port = 1521, db = EPMDMO
[2010-05-09T06:54:20.402-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: SSL Protocol Initialized - SSL SocketFactory initialized
[2010-05-09T06:54:20.699-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: Peer Certificate Chain(3):
[2010-05-09T06:54:20.714-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: [[[
Version: V3
Subject: CN=ccr.oracle.com, OU=Terms of use at www.verisign.com/rpa (c)05, OU=Global IT, O=Oracle Corporation, L=Redwood Shores, ST=California, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 126484617735060833031672477175673947636995798346030414463203905767325249772953279144384357766006815101034501698878511926718137275402247180206176507598520965207099036209959054153609440070358274987559344845438007585125964758282852498389487164896685302381484205088204064664382056656592869143856352689583929480807
public exponent: 65537
Validity: [From: Mon May 04 18:00:00 MDT 2009,
               To: Sun Jul 04 17:59:59 MDT 2010]
Issuer: CN=VeriSign Class 3 Secure Server CA, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [    52b9bccd 239d7a0d 7bb16003 389848b0]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 62 30 60 A1 5E A0 5C 30 5A 30 58 30 56 16 09 .b0`.^.\0Z0X0V..
0010: 69 6D 61 67 65 2F 67 69 66 30 21 30 1F 30 07 06 image/gif0!0.0..
0020: 05 2B 0E 03 02 1A 04 14 4B 6B B9 28 96 06 0C BB .+......Kk.(....
0030: D0 52 38 9B 29 AC 4B 07 8B 21 05 18 30 26 16 24 .R8.).K..!..0&.$
0040: 68 74 74 70 3A 2F 2F 6C 6F 67 6F 2E 76 65 72 69 http://logo.veri
0050: 73 69 67 6E 2E 63 6F 6D 2F 76 73 6C 6F 67 6F 31 sign.com/vslogo1
0060: 2E 67 69 66 .gif
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 6F EC AF A0 DD 8A A4 EF F5 2A 10 67 2D 3F 55 82 o........*.g-?U.
0010: BC D7 EF 25 ...%
[3]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://SVRSecure-crl.verisign.com/SVRSecure2005.crl]
[4]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.23.3]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: 0000: 16 1C 68 74 74 70 73 3A   2F 2F 77 77 77 2E 76 65 ..https://www.ve
0010: 72 69 73 69 67 6E 2E 63   6F 6D 2F 72 70 61        risign.com/rpa
[6]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[7]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
[accessMethod: 1.3.6.1.5.5.7.48.1
   accessLocation: URIName: http://ocsp.verisign.com, accessMethod: 1.3.6.1.5.5.7.48.2
   accessLocation: URIName: http://SVRSecure-aia.verisign.com/SVRSecure2005-aia.cer]
[8]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
[2010-05-09T06:54:20.714-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: [[[
Version: V3
Subject: CN=VeriSign Class 3 Secure Server CA, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: 18905729229464742433949840178165285210788629616064305164260843170201977241822595607598003983710482114887504542420063531704226365322091550579034120400511694538047325464426047959412241672706076731441028369861556999479337863789783838582999151810376013650218058341794419022809268802993425241541430009002110553726612125414429934927217253337526656605550620555845061032537869588361121949241772361851996536275260212221084778605793422355009443918198903890623415507477268041766919150091887619618794603091993360637671933766441597921249204891707900552776893415739395596650548462810104696585021566385762017523199762687187467514321
public exponent: 65537
Validity: [From: Tue Jan 18 17:00:00 MST 2005,
               To: Sun Jan 18 16:59:59 MST 2015]
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
SerialNumber: [    75337d9a b0e1233b ae2d7de4 469162d4]
<RESPONSE><STATUS CODE="202"><MESSAGE></MESSAGE></STATUS><REQUEST_DATA><REGISTRATION_CIPHER VALUE="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"/></REQUEST_DATA></RESPONSE>
[2010-05-09T06:55:22.359-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] trace: The component type 'Foundation' is not supported. Valid component types are: [OCM, OHS, WebCache]
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-02015] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Creating product component(s) in the HIT Registry (if not created yet) for all selected product(s)...
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = WORKSPACE
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-05955] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Setting link. Parent: id [b57bd794d9cd2537337158c31287d1efc497ffe], componnet type [FOUNDATION_SERVICES_PRODUCT]. Child: id [b57bd794d9cd2537337158c31287d1efc497ff1], component type [WORKSPACE]
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1] to be stored
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : allRegistryComponents contains WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1]
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : toUpdateComponents did not contain WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1]. It has been added to toUpdateComponents
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-01426] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] propertiesExtractLocation : C:\Oracle\Middleware\user_projects\domains\EPMSystem\scripts
[2010-05-09T06:55:47.986-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.utils.Shortcut] trace: shortcut out:Microsoft (R) Windows Script Host Version 5.7[[
Copyright (C) Microsoft Corporation. All rights reserved.
[2010-05-09T06:55:58.627-06:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-05-09T06:56:02.690-06:00] [EPMCFG] [WARNING] [EPMCFG-01113] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Couldn't find product component in updateRegistryEntries
[2010-05-09T06:56:02.706-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01107] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Running file: C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\workspace\database\Oracle\create.sql
[2010-05-09T06:56:03.503-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
java.lang.NullPointerException
     at com.hyperion.cis.config.AppServerDeployer.isDeployAsWinService(AppServerDeployer.java:1699)
     at com.hyperion.cis.config.AppServerDeployer.initializeParameters(AppServerDeployer.java:169)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:636)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:331)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:57:03.804-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.foundation.config.OCMTaskProcessor] Error: [[
java.lang.NullPointerException
     at com.hyperion.foundation.config.OCMTaskProcessor.uploadOCMConfigurationToRegistry(OCMTaskProcessor.java:209)
     at com.hyperion.foundation.config.OCMTaskProcessor.execute(OCMTaskProcessor.java:95)
     at com.hyperion.cis.CustomTaskProcessor.execute(CustomTaskProcessor.java:94)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeCustomTask(RunAllTasks.java:725)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:313)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Component provisioning is done.
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Done sorting tasks by priority
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-07326] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Executing deployment task for ProductDescriptor [workspace]
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01328] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Looking for product component in the registry: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:57:08.007-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
java.lang.NullPointerException
     at com.hyperion.cis.config.AppServerDeployer.isDeployAsWinService(AppServerDeployer.java:1699)
     at com.hyperion.cis.config.AppServerDeployer.initializeParameters(AppServerDeployer.java:169)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:636)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:331)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
Registry.log:
[2010-05-09T06:51:46.860-06:00] [EPMREG] [NOTIFICATION] [EPMREG-51096] [oracle.EPMREG.REG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryUtils] [SRC_METHOD: readDatabaseProperties] Security Key could not be read from reg.properties file.
[2010-05-09T06:55:33.719-06:00] [EPMREG] [ERROR] [EPMREG-11054] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryConnection] [SRC_METHOD: createRegistry] [arg: C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\registry\create_oracle.sql] An SQL Exception executing the registry DDL script C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\registry\create_oracle.sql.
[2010-05-09T06:55:33.735-06:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryConnection] [SRC_METHOD: createRegistry] Exception occurred.[[
java.sql.SQLSyntaxErrorException: ORA-00917: missing comma
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)
     at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:942)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1223)
     at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1775)
     at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1744)
     at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:299)
     at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:241)
     at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:82)
     at com.hyperion.hit.registry.Registry.createRegistry(Registry.java:2220)
     at com.hyperion.config.document.Storage.createRegProperties(Storage.java:1396)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:105)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11037] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: getConnection] An error occured when checking the status of the registry connection and reseting it.[[
com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
     at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
     at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
     at com.hyperion.hit.registry.Registry.getConnection(Registry.java:161)
     at com.hyperion.hit.registry.Registry.lookupComponents(Registry.java:1263)
     at com.hyperion.hit.registry.Registry.lookup(Registry.java:517)
     at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:70)
     at com.hyperion.css.registry.RegistryManager.populateCSSTrustedServicesKey(RegistryManager.java:140)
     at com.hyperion.foundation.config.FoundationDbConfigurator.populateCssTrustedKey(FoundationDbConfigurator.java:121)
     at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:88)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11045] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: lookupComponents] [arg: SYSTEM9] An exception when looking up components of type SYSTEM9 matching the specified properties.
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: lookupComponents] Exception occurred.[[
com.hyperion.hit.registry.exceptions.RegistryException: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
     at com.hyperion.hit.registry.Registry.getConnection(Registry.java:178)
     at com.hyperion.hit.registry.Registry.lookupComponents(Registry.java:1263)
     at com.hyperion.hit.registry.Registry.lookup(Registry.java:517)
     at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:70)
     at com.hyperion.css.registry.RegistryManager.populateCSSTrustedServicesKey(RegistryManager.java:140)
     at com.hyperion.foundation.config.FoundationDbConfigurator.populateCssTrustedKey(FoundationDbConfigurator.java:121)
     at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:88)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
     at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
     at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
     at com.hyperion.hit.registry.Registry.getConnection(Registry.java:161)
     ... 10 more

Yes. I downloaded and extracted the additional components. I have also dropped and recreated the HSS repository. Each time I have tried to reinstall, I have uninstalled all EPM/Oracle components, removed registry keys, removed EPM environment variables and removed references to oracle in the PATH environment variable.
I have tried installing/configuring HSS 11.1.2 on both Windows 2008 SP1 64-bit and Windows 2008 SP1 32-bit. The configuration error is the same.
I was able to get my SR reassigned to a different support analyst, and we are working on troubleshooting now.
If you can think of anything else to try, let me know.
BTW...on the 32-bit server, the page file maximum is 16GB (should be enough)?
Thanks.

HP System Recovery DVD incorrectly formats hard drive (WIN Vista HP SP1 64-bit 510141-001)

HP Pavilion DV4-1225dx
Vista Home Premium 64-bit
AMD Turion x2
I had previously posted the issue as "HP System Recovery Fails on new HDD", however it appears that the reason it is failing is due to incorrect formatting of the hard drive:
Went to purchase the oem HDD @ Tiger Direct (Hitachi 0A56415 Travelstar 5K320 Mobile Hard Drive - 2.5", 5400 RPM, SATA 3G, 250GB, 8MB Cache) but found it was out of stock. I purchased the suggested replacement (WD Blue 320GB Mobile Hard Drive - Designed for everyday computing - 2.5", SATA 3Gb/s, 5400RPM, 8MB C...)
I have attemptted the System Recovery several times each failing with errors. But after each failure the HDD is found to be incorrectly formatted as documented in the following link:
System Recovery Fails on new HDD
hp G71-340US WIN 7 HP 64 Bit
hp pavilion dv4-1225dx VIsta HP 64 Bit
hp pavilion zd7000 WIN XP Pro
hp pavilion xv886 WIN Millennium / WIN XP Pro
hp deskjet 6980xi
hp pavilion xt236 / ze4200 WIN XP Media Edition

Slolearner,
After doing a little research, I believe your issue may be related to your new hard drive being an AF (Advanced Format) drive. Please see "WD Scorpio® Blue™ SATA/PATA Hard Drives", which indicates your WD3200BPVT may an AF drive.
Please see "Cannot Recover the PC after Replacing the Hard Drive with an AF Drive (Windows 7 and Vista)" for information on this subject. While this document isn't for your specific computer, it is generic enough that it applies to your situation. If you wish to use your HP Recovery Discs successfully, you may need to purchase a non-AF drive.
If your computer boots into Windows, please see "Identifying an Advanced Format Hard Drive" to download and run the HP Advanced Format Hard Drive Information tool.
If it is an AF drive, please see "Preparing Advanced Format Hard Drive for Windows" and "Improving the Performance of an Advanced Format Hard Drive" for more information on the subject and possible steps to be taken to resolve your issue.
Lastly, it may be necessary to follow Paul_Tikkanen's advice and install Windows Vista from a Microsoft Windows Vista installation disc as follows;
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
If you can still read the 25 character Microsoft Vista product key on the bottom of your PC, you can make your own plain Vista installation media and use that to at least get the OS on your PC.
Here is how to do that if you can read that key:
Please click on the link below, click on the Windows Reinstallation Guide [27-07-2013] pdf link on the upper left of the page and then read the instructions for doing this starting on page 302.
http://philipyip.wordpress.com/dell-community-forums/
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
You may also consider purchasing a copy of Windows 7 and installing that instead. Windows 7 SP1 has much better support for AF drives than the previous versions of Windows.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can't Recover using RnR after installing Windows 7 SP1

After I install Windows 7 SP1 on Lenovo T61 machine (64-bit), I can't recover using RnR 4.3 as it seems that RnR doesn't perform anything when I chick Restore on RnR while Windows is running or when I click ThinkVantage button while the computer is starting.
Steps the issue is found
1. Clean install Windows 7 Professional x64
2. Install Lenovo drivers & softwares including RnR 4.3
3. Install Windows 7 SP1
4. Perform a backup using RnR
5. Do something (e.g. installing a program) when perform a restoration using RnR
What should I do to resolve this issue? Thanks very much.

The firmware restore cd doesn't start, boot or anything visible on the screen, it just loads it behind the scenes, does the flashy or beepy thing.
Reboot twice and see if the at boot key commands work again using the OS X install disk, option key or command r or command option r while booting. (you never mentioned what OS X version or machine your using)
It's possible a recent firmware update occurred (software update or AppStore) and bricked your EFI, the version you get from the website download is older because they don't release it there until it's been tested in the field like on people like you.
If a newer firmware is on the machine already and it's borked, the older one your using won't load, only newer versions are accepted by the hardware.
If this is the case, your only choice is to have the logicboard replaced, I hope you have AppleCare.
You also could have made a mistake and downloaded the wrong one, so it's refusing to apply it.
Need machine/operating system identification help?
Find the serial number, thus the model number and thus gives the operating system that originally came with the machine. However gives not what operating system version the boot drive was later upgraded to. Do not use older OS X verisons to repair newer verisons. It is possible to use the original operating system version installed on another boot drive to recover files from a later operating system non-booting drive.
https://support.apple.com/kb/HT1159#MacBook_Pro https://support.apple.com/kb/HT1349
https://support.apple.com/kb/HT1559 http://www.everymac.com/ultimate-mac-lookup/

G4010, Windows 7-sp1 64bit, scan doc says all is good, software will not reinstall.

Have HP Scanjet G4010. Windows 7-SP1 64 Bit. The doc program that I ran says connection good. The "driver only" download works good. However, the primary software that comes with the scanner (also includes the twain driver) will not install completly. When I try to install it, it complains that it can not find the SCAN.MSI file in the E:\temp\7Z????\scan directory. That file and even the directory do not usually exist. I point the program to a location with a scan.msi (uncompressed install program), and it says it is not the correct file. The next time I tried to run it, It saw the attempted install of the software and wanted to uninstall a couple of the programs. I told it to go ahead and delete. It deleted the programs but now if I run the install, it still wants to delete the files and shows me nothing that I can delete. I tried to delete the directories from drive C: and references from the Registry to any and all HP software. No difference in the install. I also tried running the MS Fix program for software install and uninstall problems. It claimed to fix something, to change was seen in HP software behavior.

Still looking for an answer...

No "super drive" under windows bootcamp

Windows 7, when running in Bootcamp won't register the optcal drive on my iMac 24".
I rarely use Windows via Bootcamp but when I did recently I found that it was not recognising the CD in the drive. Windows 'Disk Management' saw the Drive but said 'No media' and it was impossible to eject the (non-existent) disk without a reboot. This was the case with disks intended for both Windows (e.g. Half Life game) and Mac (Install disk2). The Windows disk was readable under OS X. Both were readable on my Windows laptop.
Is this a recurring problem with Bootcamp? And Windows 7? iMac superdrives? Is it possible to sort it out from either the Mac interface or that of Windows?

Hi Gottalight,
I've been having this problem for the past year and a half. Only recently I have found (but not a fool-proof) method of getting the super drive in bootcamp windows 7 32bit on the iMac to work.
Since my mac is an iMac 24" from late 2009, I assume this might help you.
Please note these are not "steps" but rather variables I tried that might have done something along the way.
Variable One:
I disabled UAC in my Windows preferences, by going to:
Control Panel > User Accounts > Change User Settings > Set slider to "Never Notify". This in a sense, gives one almost full administrative control. However, please be aware that since this opens up your computer to 3rd party applications writing to your HD without your consent, that safe computer practices should be used.
Variable Two:
Inserted the Snow Leopard (retail) DVD. The disc that holds the Bootcamp drivers. Nothing showed up, of course. However, it did not eject the disc either, which is usually the case.
Variable Three:
Installed Windows 7 SP1 (it was long overdue), and restarted. I also had the Snow leopard disc in the super drive at the time of the restarting.
Low and behold, when the computer was done with it's restart process, and the updates were complete, I was able to access the contents of discs in the super drive.
I don't doubt this is a fluke situation, but if you're able to reproduce the solution, please let me know, so I can try and figure out which variable it is. I have a hunch it has to do with UAC, as they often interfere with the most basic of my tasks (running 3rd party apps etc.)
Hope this helps!
Cheers

Running driver on Windows XP SP1

Similar Messages

Maybe you are looking for