Running eMac with Broken CRT... Dangerous? Disconnect-able?

I have on hand a 1.25ghz emac. The logic board and all hardware work. The CRT was damaged in shipping. At start up, there is a "squeel" and a little bit of a spark in the back. I've been using it "in proxy" with Leopard's "Share Screen" mode. Pretty slick! But what risk am I posing by using an eMac with the Broken CRT?
If no "hazardous" elements are involved, can the power to the display be disconnected from the down converter or something? Leaving the power to go to the Mobo? It would be nice to not have the CRT being powered up....
Thanks in advance.
Dave

If it is making a noise and sparking, that ought to be corrected to be safe.
This page may guide you to what you want to do.
Headless eMac
The article seems partly experimental rather than proven, but you may get some useful understanding of what is involved.
If you succeed, post back and tell us the outcome. I am not one to throw away things if only one component has gone, so I applaud your resourcefulness. Just don't get zapped! Good luck.

Similar Messages

I am running lion now and I am not able to safe my emails to the computer with the attachments. what's wrong?

I am running lion now and I am not able to safe my emails to the computer with the attachments. what's wrong?

Try using these settings: http://support.apple.com/kb/HT4864.

Problem with Adobe Reader not being able to run with Maverick 10.9.2?

problem with Adobe Reader not being able to run with Maverick 10.9.2?

Have you updated your version of Adobe Reader?

(URGENT) eMac with leopard running FCE 2?

I have an apple eMac running 10.5.8 and i got a great deal on FCE 2.0 i was wondering if this would work on the machine?

Yes, FCE 2 should run fine on an eMac with 10.5.8
If it were me, I'd prefer FCE 3 or 3.5 on your machine but if your deal is for FCE 2, you'll be fine.

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.

I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

[svn:bz-4.0.0_fixes] 20641: Update BlazeDS 4.0. 0_fixes branch to be able to run regressions with a class deserialization validator .

Revision: 20641
Revision: 20641
Author:   [email protected]
Date:     2011-03-07 09:14:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Update BlazeDS 4.0.0_fixes branch to be able to run regressions with a class deserialization validator.
Modified Paths:
    blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/build.xml
Added Paths:
    blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xml

Remove this 3rd party add-on. Cooliris.
0x20bd000 - 0x20befff com.cooliris.safariplugin ??? (1.7) /Library/InputManagers/Cooliris/Cooliris.bundle/Contents/MacOS/Cooliris
Go here for a Glims update.
http://www.machangout.com/

I have an iMac with Safari; will i be able to run LiveCycle and Designer? I cannot get past acceptance page.

I have an iMac with Safari; will i be able to run LiveCycle and Designer? I cannot get past acceptance page. I want to use and update forms and it says I need Designer. I was trying the trial version but am having problems.

Is there an actual individual who can give me guidance? This "leave a question and come back days later" does not help.

Snow Leopard unusable with Broken Pipe messages in the console

Hello
Recently, probably after having installed OS X 10.6.8, I noticed that after a while, something within the OS becomes saturated leading to no new processes being able to be started. All existing programs continue to run and all seems normal except if a running program needs to call another program (e.g., Mail needing to fetch a password from Keychain Access).
The console then becomes awash with broken pipe messages and a whole bunch of error logs are created for various programs.
This is causing me great irritation as everytime I am forced to restart the machine (sometimes by forcing a hard-reboot).
I would really appreciate any help on this matter. I would rather not have to completely re-install the OS if I can help it.
The following is a typical excerpt from the system.log:
Oct 29 13:00:11 mbpag activitymonitord[519]: Request failed: Broken pipe
Oct 29 13:00:11 mbpag Activity Monitor[497]: Error communicating with activitymonitord - ipcErr = 1
Oct 29 13:00:11 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag quicklookd[40918]: [QL] Can't remove user interaction with Security framework: 226
Oct 29 13:00:12 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:12 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40919]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40919]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40919]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40920]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40920]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40920]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:12 mbpag com.apple.launchd.peruser.501[452]: catch_mach_exception_raise_state_identity(): PID: 40920 thread: 0x13d07 type: 0xa code: 0x1000f8044 codeCnt: 0x2 flavor: 0x1000f8054 old_state: 0x1000f805c old_stateCnt: 0x2c new_state: 0x1000f702c new_stateCnt: 0x1000f7028
Oct 29 13:00:12 mbpag com.apple.launchd.peruser.501[452] (com.apple.ReportCrash.Self[40920]): Job appears to have crashed: Abort trap
Oct 29 13:00:12 mbpag com.apple.launchd.peruser.501[452] (com.apple.ReportCrash[40919]): Job appears to have crashed: Abort trap
Oct 29 13:00:13 mbpag com.apple.ReportCrash.Root[40921]: 2011-10-29 13:00:13.015 ReportCrash[40921:2803] Saved crash report for ReportCrash[40919] version ??? (???) to /Library/Logs/DiagnosticReports/ReportCrash_2011-10-29-130012_localhost.crash
Oct 29 13:00:13 mbpag com.apple.launchd.peruser.501[452] (com.apple.quicklook[40918]): Job appears to have crashed: Abort trap
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:13 mbpag quicklookd[40924]: [QL] Can't remove user interaction with Security framework: 226
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:13 mbpag com.apple.launchd.peruser.501[452] (com.apple.ReportCrash): Throttling respawn: Will start in 9 seconds
Oct 29 13:00:13 mbpag com.apple.ReportCrash.Root[40921]: 2011-10-29 13:00:13.426 ReportCrash[40921:2f03] Saved crash report for quicklookd[40918] version ??? (???) to /Library/Logs/DiagnosticReports/quicklookd_2011-10-29-130013_localhost.crash
Oct 29 13:00:13 mbpag activitymonitord[519]: Request failed: Broken pipe
Oct 29 13:00:13 mbpag Activity Monitor[497]: Error communicating with activitymonitord - ipcErr = 1
Oct 29 13:00:15 mbpag activitymonitord[519]: Request failed: Broken pipe
Oct 29 13:00:15 mbpag Activity Monitor[497]: Error communicating with activitymonitord - ipcErr = 1
Oct 29 13:00:17 mbpag /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/pl ugin-container[40931]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:17 mbpag /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/pl ugin-container[40931]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:17 mbpag /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/pl ugin-container[40931]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:17 mbpag activitymonitord[519]: Request failed: Broken pipe

sangak wrote:
I was hoping I'd get a magic solution instead of the dreaded OS reinstall.
That is the magic solution, it gives you a new OS X copy which you immediately update, leaves all your files and programs alone. (unless they have kernel extensions and you need to update those programs)
It's fast, easy and simple, it's Lion "overwrites" that are a pain because it needs the Internet.
There is only one person here that spends his time analyzing such under the hood details and usually has to tell you what I'm saying anyway because that's the only way to correct it.
I'm trying to get you done and out of my way and you back to your life.
I must say that I am quite disappointed with the kernel failing in this way - it is not really in keeping with the robust/Unix reputation...
Don't know what the problem is, it is very robust, but hard drives are based on magnetic bits and those bits fail, the best OS in the world can't stand up if the chair it's standing on is kicked out from underneath it.
OS X only takes 4.5GB, Apple could have incorporates a automatic recovery parttion check upon boot and restored OS X if if didn't boot, but they didn't do that.
Then when they have to place a recovery partiton like in Lion as they are phasing out the optical drive, they make one get online to get a new copy of OS X.
How stupid is that?

Error on running reports with filters/security

Post Author: mishel
CA Forum: Publishing
Hi, I am trying to run a report with filters/security defined via Business View. When I run the report as administrator, I am able to view successfully. However, when I login as test/dummy account which filters my parameters, I am getting such error - "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server." Appreciate all the help I can get.Thank you,Michelle

Hi onizga,
According to your description that you are migrating SSRS 2008 R2 reports to SSRS 2012 SP2, after migration you got some error like “The Uri string is too long” which only occurred when accessing the drill-through actions, right?
Usually, the issue can be caused when you try to pass some parameters that cause the URL length to exceed 65,520 characters for a Microsoft SQL Server 2012 Reporting Services (SSRS 2012), you cannot render the report, and you may receive the following error
message:
The value of parameter 'param' is not valid. (rsInvalidParameter).Invalid URI: The Uri string is too long.
This is an known issue and already have the hotfix SQL Server 2012 Service Pack1 Cumulative Update 9 (CU9) as you know, you can try to reinstall this hotfix to fixed this issue:
http://support.microsoft.com/kb/2916827 .Any issue after applying the update, please post it on the following thread or you can submit an feedback:
http://connect.microsoft.com/SQLServer/feedback/details/788964/ssrs-2012-invalid-uri-the-uri-string-is-too-long
Similar threads for your reference:
SSRS - The value of parameter 'param' is
not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long.
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidParameterException:
The value of parameter 'pSetOfScopes' is not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long
If you still have any question, please feel free to ask
Regards
Vicky Liu
If you have any feedback on our support, please click here

Firefox is already running, started with the latest upgrade

I have been running Firefox with Win7 for several months with no problems. Suddenly on two separate computers I'm frequently getting the error that Firefox is already running. I open the task manager, end the process, and it works fine. But it will happen again, not every time, but frequently enough that I'm certainly noticing. On one occasion I was unable to find a firefox process listed. But after trying to launch again and getting the error, I was able to find the process and stop it. That only happened once.

Thanks. I did look at the first thread. I know how to fix it each time, i.e., kill the process, but don't know how to prevent it from happening. As I said, something has changed. I realized after the post, that I've also recently upgraded my Norton's Internet Security to the 2013 version. That might also be related.
I don't experience Firefox hanging on close though I suppose if the process doesn't end then it is hanging on a system level. In other words, it appears to close normally every time. I'll take a look at that thread.
Thanks again for posting.

Will an iBook G3 run fast with OS9?

I have a 700mhz iBook G3 with OSX Tiger and maxed out RAM. It runs okay with OSX, but it's slow and the 20gb hard drive runs fairly hot at 50-54 degrees celsius. I was wondering about whether it would run much faster and cooler if I did a clean install of OS9 on it, updating it to 9.2.2. I know a lot of software wouldn't run anymore on it, but the downgrade would be worth it if it would run a LOT faster and be capable of video editing with old versions of Final Cut or Premiere. Would the old versions of Photoshop, internet browsers, etc... be able to create and read decently modern file formats?
Would this work? How much faster would it run? What do you think about this idea?
Please let me know. Thanks.

Do you have the original system CDs that came with the iBook?
I wouldn't advise trying to run Mac OS 9 if you want to use the iBook on the internet. The browsers that are available for OS 9 are not nearly as up to speed as those available for Mac OS X.
The iBook is about seven years old, so it is not going to be a speedy computer, no matter what you do. Probably the best upgrade you could make is a new, faster, larger hard drive, but it may not be worth the time, trouble, or expense.

HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need?

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need? I have a SM58 type mic and-over-the ear headphones.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just free

I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just freezes the computer and I have to shut it down and re open without any success with opening the elements program.
Can you help

Sosure
What computer operating system is your Premiere Elements 10 running on?
What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement about the Premiere Elements 10 NVIDIA GeForce issue which is found at the top of this web site. Does that apply to you? The explanation for the situation and the fix (roll back of the driver version) are all included in that Announcement.
We need to rule in or out this factor at the onset before we get to other questions
a. non NIVIDIA video card/graphics card driver
b. project preset and properties of source media
c. computer details
More later.
We will be watching for your reply.
Thank you.
ATR

I'm having trouble with Snow Leopard server disconnecting.

I'm having trouble with Snow Leopard server disconnecting. Recently upgraded my laptops to latest MacBook Pro OSX Lion, but everything has been fine since December until now. I did just add a 2TB Drive to the set-up (OWC Mercury Elite AL-Pro) in a Daisy chain of 2 other 2TB drives and a 3TB Drive that had been working perfectly up until now. I was able to use it yesterday, but now it has gone haywire and I lose connections while working on files or saving files. Have to restart server and it works for a while, but then drops off. Could Server be corrupt?

Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe

Running eMac with Broken CRT... Dangerous? Disconnect-able?

Similar Messages

Maybe you are looking for