Running Essbase 6.1 as a service on Windows 2000
OK, what's the scoop about running Essbase 6.1 as a service on Windows 2000?Besides not seeing the graphic interface, are there any issues? Are there any issues with shutting down the Essbase server by either clicking "Stop" in the Services panel or issuing a Net Stop service command?Finally, has anyone successfully used Microsoft's "Srvany" utility to run Essbase as a service yet still display the graphic windows?Do most of y'all on NT or 2000 run as a service or as an app?
Just a little extra information about running Essbase as a Service. We are running on NT 4.0. If one application is causing a problem, you can kill the one application without having to reboot the server. You will need to know which application is causing your problem and You will need to know it's "process id". If you can't find the right process id by looking at "tlist", you can look in the ESSBASE.LOG. Start at the bottom of the log and search backwards for the text "started with process id". When you find the process id of the problem application, you can then kill it at the DOS prompt by typing "kill ###", where ### is the process id.This is helpful for us because we have about 10 applications on one server and we don't want to have to take all of Essbase down just for one application. Hope this is helpful to someone.
Similar Messages
-
Running Weblogic6.0 SP2 as a Service on Windows 2000 failes!?
I installed j2sdk1.3.1. I have allso checked 'Interact with desktop' box and inserted
-Xrs option in
'set CMDLINE' variable in installNtService.cmd - file. Despite all these Service
dies after 10 seconds.
What else can I to do?Another thing to consider is that you have not set the password in the
installNTService.cmd.
To do this add the following:
rem *** Install the service
"D:\weblogic\wlserver6.0\bin\beasvc" -install -svcname:myserver -javahome:"D
:\weblogic\jdk130" -execdir:"D:\weblogic\wlserver6.0" -extrapath:"D:\weblogi
c\wlserver6.0\bin" -cmdline:%CMDLINE% -password:"yourpwdhere"
Notice the -password:"yourpwdhere"
Regards,
Eric
"Jarkko Senne" <[email protected]> wrote in message
news:3b7a1a93$[email protected]..
>
I installed j2sdk1.3.1. I have allso checked 'Interact with desktop' boxand inserted
-Xrs option in
'set CMDLINE' variable in installNtService.cmd - file. Despite all theseService
dies after 10 seconds.
What else can I to do? -
Running OC4J as a service in Windows 2000
I've been trying to have OC4J run as a service in Windows 2000, as having to be logged in isn't very flexible.
I've searched the net, and I found a tool by Microsoft called srvany.exe/instsrv.exe, which should install any program as a service. It works, but the service shuts down whenever I log off, which defeats the purpose.
What I've done is run the command line
instsrv "Oracle Application Server" C:\Progs\Service\srvany.exe
and then edit the registry settings under the newly created folder to
Application=C:\Progs\Oracle 9i AS\j2ee\home\java
AppParameters=-jar oc4j.jar
AppDirectory=C:\Progs\Oracle 9i AS\j2ee\home
Does anyone know this tool well enough to tell me what I'm doing wrong, or know something else I can use?
Brigt Olav VikHi
Have managed to run oc4j as a service as follows under xp pro
Download runexescv from http://www.judoscript.com/goodies/index.html
Unpack and run
Create service say OracleOc4j
Needs basic parameters setup
Cmdline and Home
My setup is
debug=false
cmdline=c:\ora9ias\jdk\bin\java - Dorg.omg.CORBA. ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=c:\ora9ias\j2ee\Oracle9iDS\config\jazn.xml -Doracle.home=c:\ora9ias -DORACLE_HOME=c:\ora9ias -jar c:\ora9ias\j2ee\home\oc4j.jar -userThreads -config c:\ora9ias\j2ee\Oracle9iDS\config\server.xml
( all from startinst.bat )
home=C:\ora9ias\j2ee\home\
Save and close
Oracleoc4j will now be set up as service
Change service to auto and start service !!
Appears to be neat and easy way of setting up an OC4J service
Ian -
How to run jar as a service on windows 2000 server?
Hi,
I built a console jar program and want to run it as a service on windows 2000 server.
May I ask how can I do it?
ThanksTake a look at something called java service wrapper ,
http://wrapper.tanukisoftware.org/doc/english/introduct
on.htmlNot seen that one before. Ta.
Alexandria software used to support a simpler app called JavaService... google for that maybe if the above is too much.
/k1 -
Weblogic as Service on Windows 2000
I am running a WLS as a service on a Windows 2000 server and have integrated Hibernate
using EJBs. Hibernate relies on a config file residing in the application root
directory. When run from the command prompt this config file can be found by WLS
in the root domain directory.
When run as a service the file can not be found. Where is the domain root when
run as a service.
ThanksAccording to BEA, you cannot clear the existing classpath. The variables
set by WLCONFIG are stored in the registry but the classpath is not. It is
built on the fly. It takes the variables JAVA_HOME, WEBLOGIC_HOME,
WEBLOGIC_LICENSEDIR, and CLASSPATH Prefix which are configurable through the
use of WLCONFIG to build the classpath.
You can also clear the CLASSPATH Prefix to "" which will clear the first
entry in your classpath.
Hope that helps..
"Raghu Mani" <[email protected]> wrote in message
news:39d9dc80$[email protected]..
When I use wlconfig to setup the "classpath", it only prepends to existingclasspath (which is incorrect). How can I set it? I can set the
weblogic.class.path without a problem. I need to be able to run it as a
service under windows 2000. -
I cannot start my OMS service on Windows 2000
I tried starting Oracle8i OMS Service on Windows 2000. I cannot
start it automatically so I started it manually. But Irecieved
an error message saying No application Error, some configuration
error with the Operating System.
On searching forums for DBAs i recieved a solution to manually
start by command 'oemctrl start OMS'. It did not help either as
the resources.ora file was not present at the location
C:\Oracle\admin\orb\resources.ora .
I found a resources.ora at location c:\oracle\ora81
\orb\admin\resources.ora but this file is empty.
NOW Wwith the command 'oemctrl start OMS' I am getting the
following error msg. Please send me the answer if possible at
[email protected]. WHERE Can I find the content for
resources.ora??
C:\Documents and Settings\Administrator>oemctrl start OMS
OEMCTRL for Windows NT: Version 2.1.0.1.0
Copyright (c) 1998, 1999 Oracle Corporation. All rights
reserved.
Starting the Oracle Management Server... [main][2001-11-
10:12:28:10:630] VdbSess
ion.processError: errorCode >1017<
[main][2001-11-10:12:28:10:710] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:10:830] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:10:970] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:11:381] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:11:421] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:11:541] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:11:691] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:102] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:12:142] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:12:262] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:12:413] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:493]
Error starting Oracle Management Server.I got the same problem.
-
How can i run AirPort Express for both a Mac and Windows 2000 SP2?
I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?
Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4) -
Cannot run Apatche and FullFilment services on Windows 2000.
Hi,
We are using Oracle EBS 11i with database 9i.
Today morning we had face virus attacked on ERP server.
We have windows env and single node installation.
After restoration of backup We are unable to start the following serviices on windown env:
This is production system.
Please assist ASAP.
Log: of starting services of application and our dattabase is working fine.
Setting service Oracle Apache Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adapcctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
Starting Oracle Apache Server PROD_styloapps ...
adapcctl.cmd exiting with status 2
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
Setting service OraclePRODOra806_1TNSListener80APPS_PROD to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adalnctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\prodora\8.0.6
LOCAL : PROD
ORACLE_SID :
PATH : d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodappl\au\11.5.0\bin;d:\oracle\prodappl\fnd\11.5.0\bin;d:\oracle\prodappl\ad\11.5.0\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\prodcomn\util\unzip\unzip;d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\VC98\msdev98\BIN;C:\MICROS~1\VC98\BIN;C:\VC98\TOOLS\WINNT;C:\VC98\TOOLS;d:\oracle\prodappl\au\11.5.0\bin;d:\oracle\prodappl\fnd\11.5.0\bin;d:\oracle\prodappl\ad\11.5.0\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\prodcomn\util\unzip\unzip;d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\MKSNT\bin;C:\WINDOWS;C:\WINDOWS\system32
LD_LIBRARY_PATH : d:\oracle\prodora\8.0.6\lib
ECHO is off.
The service "OraclePRODOra806_1TNSListener80APPS_PROD" is already started
adalnctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service OracleConcMgrPROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adcmctl.cmd start
Timeout specified in context file: 1000 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
Starting concurrent manager for PROD ...
adcmctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service OracleFormsServer-Forms60PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfrmctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
ECHO is off.
ECHO is off.
Starting forms server for PROD on port 9000 ...
adfrmctl.cmd exiting with status 2
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
Setting service OracleReportServer-Rep60_PROD to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adrepctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "OracleReportServer-Rep60_PROD" is already started
adrepctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Metrics Client PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfmcctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "Oracle Metrics Client PROD_styloapps" is already started
adfmcctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Metrics Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfmsctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "Oracle Metrics Server PROD_styloapps" is already started
adfmsctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Fulfillment Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\jtffmctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.cmd
Sat 02/12/2011
01:15 AM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
jtffmctl.cmd exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server PROD_styloapps adapcctl.cmd Started
OraclePRODOra806_1TNSListener80APPS_PROD adalnctl.cmd Started
OracleConcMgrPROD_styloapps adcmctl.cmd Started
OracleFormsServer-Forms60PROD_styloapps adfrmctl.cmd Started
OracleReportServer-Rep60_PROD adrepctl.cmd Started
Oracle Metrics Client PROD_styloapps adfmcctl.cmd Started
Oracle Metrics Server PROD_styloapps adfmsctl.cmd Started
Oracle Fulfillment Server PROD_styloapps jtffmctl.cmd Already Started
Oracle Restricted Apache Server PROD_styloapps adaprstctl.cmd Disabled
Oracle Apache Server PROD_styloapps for PL/SQL adapcctl.cmd Disabled
Oracle TCF SocketServer PROD_styloapps adtcfctl.cmd Disabled
Oracle ICSM PROD_styloapps ieoicsm.cmd Disabled
Oracle iProcurement Bulk Loader PROD_styloapps icxblkctl.cmd Disabled
ServiceControl is exiting with status 0
Thanks,
FayazAfter restoration of backup We are unable to start the following serviices on windown env:
This is production system.
Please assist ASAP.For production issues, please log a SR with severity 1.
Please run AutoConfig and make sure it completes successfully.
Also, check the startup log files for details about the error.
Thanks,
Hussein -
WebLogic 6.0 as NT Service on Windows 2000
I started the WebLogic 6.0 as NT service. After it was started i tried to access the administrator console through the web browser. I always get "Cannot find server" or "DNS Error".If I start weblogic using the startWebLogic.cmd, the admin console seems to work fine.Also when WebLogic 6.0 is installed as an NT service, do i need to specify any startup parameters?I would appreciate your responses.ThanksShyam
Hi Dan,
Unfortunatly Sander was right. I had exactly the same problem. I couldn't open
Console (there was no socket 7001 in netstat -a). After creation password.ini
everything is OK (except that password is in clear text)
Maciek
Dan Bai <[email protected]> wrote:
I am not quite sure it is a password problem because that should occur
at the
service startup time. As a matter of fact, NT service does not need
a
password.ini file as long as you have not changed your password after
the
installation.
Can you access the console at the local NT machine where the NT service
is
running using IP address 127.0.0.1 instead of a DNS name? Actually,
you can
do this by simply using the startup menu icon "Start Default Console".
-Dan
Sander Zwienink wrote:
You need to specify the password to start te server, you can do thisby
putting the password in a file called password.ini
You can put this file in the same directory where you start Weblogic
Please be aware of the fact that WL as a NT service stops when youlog-on
and off the machine. This is due to a problem with the current JDK(1.3.0)
According to other posting in this newsgroup Sun will change this behaviour
in the upcoming JDK 1.3.1
Sander
"shyam krishnamurthy" <[email protected]> wrote in message
news:3acb4e61$[email protected]..
I started the WebLogic 6.0 as NT service. After it was started i
tried to
access the administrator console through the web browser. I alwaysget
"Cannot find server" or "DNS Error".If I start weblogic using the
startWebLogic.cmd, the admin console seems to work fine.Also when WebLogic
6.0 is installed as an NT service, do i need to specify any startup
parameters?I would appreciate your responses.ThanksShyam -
Running OC4J as Windows 2000 service
Can I configure OC4J Instance to run as a service on Windows 2000.
1) How can I do that ?
2) If not possible, why can I not do that ?
3) If possible, Why should I not do that ?
Thanks,Sorry, but I can not access the above link. Is this link still active.
<<<<<
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
>>>>>> -
Useful tool for running essbase as a service
Essbase as a service makes it difficult to control single applications. If you use 'Process Explorer' by Sysinternals.com (a kind of task manager) you are able to identify your application in the list of running essbase processes. You need to add the column 'Command Line' and get full information including the App Name as a tooltip when pointing on this column.
This is planned for 1.2
-
Not able to access the links to Essbase Console, Planning and Shared Servic
Hi,
I am trying to access the links to Essbase Console, Planning and Shared Services but I get the following error message.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I tried to restart all the services on all the servers and also restarted the servers but it didn't work.
I found some more errors in the starter file on the Linux box.
{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Arial;}}
{\*\generator Msftedit 5.41.15.1515;}\viewkind4\uc1\pard\f0\fs20 Detected Java version: 1.6 in: /srv/Oracle/Middleware/jdk160_21/jre\par
Detected OS: Linux\par
parsing buildfile /srv/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml with URI = file:/s\par
rv/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml\par
Project base dir set to: /srv/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance\par
[antlib:org.apache.tools.ant] Could not load definitions from resource org/apache/tools/ant/antlib.xml. It could not be found\par
.\par
[property] Loading Environment env.\par
Build sequence for target(s) `start' is [start]\par
Complete build sequence is [start, stop, ]\par
\par
start:\par
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server\par
[starter] Operation aborted because of a system call failure or internal error\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:177)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:133)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:105)\par
[starter] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)\par
[starter] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)\par
[starter] at java.lang.reflect.Method.invoke(Method.java:597)\par
[starter] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)\par
[starter] at org.apache.tools.ant.Task.perform(Task.java:348)\par
[starter] at org.apache.tools.ant.Target.execute(Target.java:357)\par
[starter] at org.apache.tools.ant.Target.performTasks(Target.java:385)\par
[starter] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)\par
[starter] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)\par
[starter] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)\par
[starter] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)\par
[starter] at org.apache.tools.ant.Main.runBuild(Main.java:758)\par
[starter] at org.apache.tools.ant.Main.startAnt(Main.java:217)\par
[starter] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)\par
[starter] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)\par
[starter] oracle.as.management.opmn.optic.OpticBadXMLConfigException: Error reading formFactorFile: /srv/Oracle/Middleware/\par
user_projects/epmsystem6/config/OPMN/opmn/.formfactor (/srv/Oracle/Middleware/user_projects/epmsystem6/config/OPMN/opmn/.form\par
factor (No such file or directory))\par
[starter] at oracle.as.management.opmn.optic.OpmnPhone.refreshFormFactor(OpmnPhone.java:628)\par
[starter] at oracle.as.management.opmn.optic.OpmnPhone.getLocalOpmnPhone(OpmnPhone.java:99)\par
[starter] at oracle.as.management.opmn.optic.OpmnQuery.getLocalOpmnQuery(OpmnQuery.java:77)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:48)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:133)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:105)\par
[starter] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)\par
[starter] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)\par
[starter] at java.lang.reflect.Method.invoke(Method.java:597)\par
[starter] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)\par
[starter] at org.apache.tools.ant.Task.perform(Task.java:348)\par
[starter] at org.apache.tools.ant.Target.execute(Target.java:357)\par
[starter] at org.apache.tools.ant.Target.performTasks(Target.java:385)\par
[starter] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)\par
[starter] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)\par
[starter] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)\par
[starter] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)\par
[starter] at org.apache.tools.ant.Main.runBuild(Main.java:758)\par
[starter] at org.apache.tools.ant.Main.startAnt(Main.java:217)\par
[starter] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)\par
[starter] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)\par
[starter] Caused by: java.io.FileNotFoundException: /srv/Oracle/Middleware/user_projects/epmsystem6/config/OPMN/opmn/.formf\par
actor (No such file or directory)\par
[starter] at java.io.FileInputStream.open(Native Method)\par
[starter] at java.io.FileInputStream.<init>(FileInputStream.java:106)\par
[starter] at java.io.FileReader.<init>(FileReader.java:55)\par
[starter] at oracle.as.management.opmn.optic.OpmnPhone.refreshFormFactor(OpmnPhone.java:623)\par
[starter] ... 22 more\par
( Feb 06, 2012 04.33.13 PM ) Pass [00 min 05 sec] Starting BPMS_bpms1_Server\par
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server\par
[starter] Operation aborted because of a system call failure or internal error\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:177)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.start(OPMNStarter.java:115)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.start(StarterEngine.java:190)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:112)\par
[starter] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)\par
[starter] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)\par
[starter] at java.lang.reflect.Method.invoke(Method.java:597)\par
[starter] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)\par
[starter] at org.apache.tools.ant.Task.perform(Task.java:348)\par
[starter] at org.apache.tools.ant.Target.execute(Target.java:357)\par
[starter] at org.apache.tools.ant.Target.performTasks(Target.java:385)\par
[starter] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)\par
[starter] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)\par
[starter] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)\par
[starter] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)\par
[starter] at org.apache.tools.ant.Main.runBuild(Main.java:758)\par
[starter] at org.apache.tools.ant.Main.startAnt(Main.java:217)\par
[starter] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)\par
[starter] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)\par
( Feb 06, 2012 04.33.31 PM ) Pass [00 min 05 sec] Starting OHS\par
( Feb 06, 2012 04.41.51 PM ) Fail [08 min 20 sec] Starting FoundationServices\par
\par
BUILD SUCCESSFUL\par
Total time: 8 minutes 55 seconds\par
Please let me know how to fix this issue. Also please let me know where else can I find the logs to the errors.
Thanks.The logs would be a good place to start, if you are not sure where to look post your OS and planning version.
Cheers
John
http://john-goodwin.blogspot.com/ -
Can't start Foundation Services on Windows XP, Essbase 11.1.2
Installation and & configuration were fine and everything worked for a while. Machine was rebooted. After that, I tried : "EPM System Start" from start menu, but it fails starting foundation services. I tried starting only Foundation services ... It is the same. In the starter log I can see:
Adding reference: ant.PropertyHelper
Detected Java version: 1.6 in: C:\Oracle\Middleware\jdk160_11\jre
Detected OS: Windows XP
Adding reference: ant.ComponentHelper
Setting ro project property: ant.file -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
Adding reference: ant.projectHelper
Adding reference: ant.parsing.context
Adding reference: ant.targets
parsing buildfile C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml with URI = file:/C:/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml
Setting ro project property: ant.project.name -> start engine
Adding reference: start engine
Setting ro project property: ant.file.start engine -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
Project base dir set to: C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance
+Target:
+Target: start
+Target: stop
[antlib:org.apache.tools.ant] Could not load definitions from resource org/apache/tools/ant/antlib.xml. It could not be found.
[property] Loading Environment env.
Setting project property: env.TEMP -> C:\DOCUME~1\apsarch\LOCALS~1\Temp
Setting project property: env.INIT_PARAM -> EssbaseAdminServices.properties
Setting project property: env.JAVA_HOME -> C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11
Setting project property: env.CLASSPATH -> .;C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0\lib;C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\lib;C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar;
Setting project property: env.day -> 18
Setting project property: env.ProgramFiles -> C:\Program Files
Setting project property: env.Path -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;C:\Oracle\Middleware\EPMSystem11R1/products/Essbase/EssbaseServer/bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;;C:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0;C:\Oracle\Middleware\ohs\bin;C:\Oracle\Middleware\ohs\opmn\bin;C:\Oracle\Middleware\ohs\opmn\lib;C:\Oracle\Middleware\ohs\perl\bin;C:\Oracle\Middleware\EPMSystem11R1\common\ODBC\Merant\6.0\Drivers;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;C:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;C:\WINDOWS\system32C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0\bin;C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\bin;
Setting project property: env.SESSIONNAME -> RDP-Tcp#1
Setting project property: env.EPM_ORACLE_INSTANCE -> C:\Oracle\Middleware\user_projects\epmsystem1
Setting project property: env.SystemRoot -> C:\WINDOWS
Setting project property: env.EPM_ORACLE_HOME -> C:\Oracle\Middleware\EPMSystem11R1
Setting project property: env.USERNAME -> apsarch
Setting project property: env.APS_HOME -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps
Setting project property: env._JAVACMD -> C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\bin\java.exe
Setting project property: env.PROCESSOR_LEVEL -> 15
Setting project property: env.VSEDEFLOGDIR -> C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
Setting project property: env.FP_NO_HOST_CHECK -> NO
Setting project property: env.USERPROFILE -> C:\Documents and Settings\apsarch
Setting project property: env.PROCESSOR_REVISION -> 0209
Setting project property: env.timestamp -> 20100618T052007
Setting project property: env.CommonProgramFiles -> C:\Program Files\Common Files
Setting project property: env.ANT_CMD_LINE_ARGS -> -debug -f C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml start -logfile C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\starter\starter20100618T052007.log
Setting project property: env.HOMEPATH -> \Documents and Settings\apsarch
Setting project property: env.HYPERION_HOME -> C:\Oracle\Middleware\EPMSystem11R1
Setting project property: env.minute -> 20
Setting project property: env.PROCESSOR_ARCHITECTURE -> x86
Setting project property: env.OS -> Windows_NT
Setting project property: env.EAS_HOME -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server
Setting project property: env.CLIENTNAME -> Console
Setting project property: env.ComSpec -> C:\WINDOWS\system32\cmd.exe
Setting project property: env.PATHEXT -> .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
Setting project property: env.PROMPT -> $P$G
Setting project property: env.dow -> Fri
Setting project property: env.ALLUSERSPROFILE -> C:\Documents and Settings\All Users
Setting project property: env.ESSLANG -> English_UnitedStates.Latin1@Binary
Setting project property: env.HOMEDRIVE -> C:
Setting project property: env.year -> 2010
Setting project property: env.PROCESSOR_IDENTIFIER -> x86 Family 15 Model 2 Stepping 9, GenuineIntel
Setting project property: env.APPDATA -> C:\Documents and Settings\apsarch\Application Data
Setting project property: env.ESSBASEPATH -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
Setting project property: env.NUMBER_OF_PROCESSORS -> 1
Setting project property: env.month -> 06
Setting project property: env.second -> 07
Setting project property: env.ANT_HOME -> C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0
Setting project property: env._USE_CLASSPATH -> yes
Setting project property: env.DEFLOGDIR -> C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
Setting project property: env.ARBORPATH -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
Setting project property: env.SystemDrive -> C:
Setting project property: env.TMP -> C:\DOCUME~1\apsarch\LOCALS~1\Temp
Setting project property: env.USERDOMAIN -> RYLIU-TEST
Setting project property: env.tvdebugflags -> 0x20805
Setting project property: env.hour -> 05
Setting project property: env.windir -> C:\WINDOWS
Setting project property: env.COMPUTERNAME -> RYLIU-TEST
Setting project property: env.LOGONSERVER -> \\RYLIU-TEST
Class com.hyperion.cis.ant.starter.StarterEngine loaded from parent loader (parentFirst)
+Datatype starter com.hyperion.cis.ant.starter.StarterEngine
Attempting to create object of type org.apache.tools.ant.helper.DefaultExecutor
Adding reference: ant.executor
Build sequence for target(s) `start' is [start]
Complete build sequence is [start, stop, ]
start:
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@b9b538[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@1e1a408,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Fri Jun 18 05:20:16 PDT 2010
[starter] End time: Fri Jun 18 05:30:11 PDT 2010. Delay : 595063ms
[starter] Operation 'start' wasn't completed
[starter] Starting component: EssbaseAdminServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1835282[name=HyS9eas,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@9df354,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Fri Jun 18 05:30:16 PDT 2010
[starter] End time: Fri Jun 18 05:40:11 PDT 2010. Delay : 595313ms
[starter] Operation 'start' wasn't completed
BUILD SUCCESSFUL
Total time: 20 minutes 1 second
I need to run Admin Services Console & essmsh. If I try to run Admin Service Console it has error: "Could not connect to admin server" and after thae "EAS server not available". How can I start Essbase? After reboot, I can see only Hyperion Integration service started - all others not (they are set to Automatic start). Also, I see ESSBASE.exe process and couple of opmn.exe ...
Does anything else has to be started before starting EPM System start script? I really appreciate any help!Can't you install Essbase 11.1.1.x to not use Shared Services?
From the 11.1.1.3 install guide:
If you want to install Essbase in standalone mode (not using Shared Services), you can skip the installation for Shared Services. However, you must configure the Oracle's Hyperion Shared Services Registry database. To configure the Shared Services Registry database without installing Shared Services, see “Setting Up the Shared Services Registry Without Installing Shared Services” on page 112.And from page 112:
If you want to install Essbase in standalone mode (not using Shared Services), you can skip the installation for Shared Services. However, you must still configure the Shared Services Registry database. To configure the Shared Services Registry database without installing Shared Services, you run EPM System Configurator from the command line using the –forceRegistry option. This option forces the “Shared Services and Registry Database Configuration” page to display during configuration so you can enter database details for the Shared Services Registry. EPM System Configurator populates the database with tables for the Shared Services Registry, but not for Shared Services.I'm pretty sure people are running Essbase on XP boxes. That includes EAS, and maybe APS for SmartView, and that's pretty much it.
For sure XP isn't a supported environment.
Regards,
Cameron Lackpour -
One Essbase Server to Different shared services Database
I need to know if it is possible to point one essbase server to different shared services database and then have both of them working?
Hi Vasvya,
So, correct me if I am wrong, the way to do this is,
Go to the computer where essbase server is installed and run the configurator and then where it asks for set up shared services and registry database connection, we give the schema we gave for the new shared services.
Is that it? Do I have to change the instance home or something?
Thanks. Would really appreciate it if you could helpme more. -
Can I change user name after running essbase from command prompt??
Hi,
I run essbase from command prompt and during this activity I was asked to give user name and password, but by mistake I put wrong user name and now wolud like to chanege it.
Is it possible??
cheers,It worked,
now I was able to connect to easbase from planning, I ve created sample aplication and initialize it but cannot connect to Eas to download data for sample application. After I run the validation there is now only one error displayed:
Essbase / Essbase Administration Services
FAILED Web App Availability of web application context (POL-MPIKULSKI 10080, eas)
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 404
Recommended Action: Check application is started
I tried to start the eas from start>programs>epm system>essbase>administration services>start administration services(java embeded) but it didnt help.
can I start in in different way??
cheers,
Maybe you are looking for
-
Can I update my software version from 4.0.1 to 5.0.1?
Dear friends, I have an iphone, gifted to me, with a software version of 4.0.1. I have just been using it for more than a year now with itunes and other Apps. Everytime I connect it to the computer, it is telling that a new version 5.0.1 is availab
-
Can't find disk drive connected to airport extreme
I have airport extreme 802.11n gigabite connected to a usb hub and a hard disk connected to the usb hub.. The disk is a usb disk drive the disk doen't show on the desk top and disk utility doesn't show them help
-
Every three minutes or so, no matter what program I'm using, Mac OS X switches, on its own, to Finder. I updated my computer with the latest updates yesterday. Any ideas on why this is happening or how to fix it?
-
Online orders being cancelled?
I called multiple times to figure out why my online orders are now constantly and immediately being cancelled! The first person said they couldn't verify my information but I'm using my BestBuy gift card for the order and placing in store pick up ord
-
How to import self signed root CA certificates on to playbook.
Hi, I have a test environment with windows CA configured, and i want to install the root CA of this server on to my playbook device, i followed the steps mentioned in PlayBook user guide for importing root certificates, but when i select the certif