Running exe file
Hello,
Is there any way that i can run exe file from wd application ?
I will appreciate any answer or hint.
thanks in advance,
Ofer.
Hi Ofer ,
i think , u have to manually run the application in the client side after downloading from the server itself..
u have to kept it in server , and allow the client application to download it to client side and then execute..
otherwise , u have to programaically do these steps ,, copying the exe from server to a tem location in client and execute this in client side...
we can access files which are residing in server in one mor way .. thats with WebDav ... u have to set up this in the Enterprise portal if u have ..
if u have a IIS server in the same server machine or another machine , u can put these there and using WebDav u can access...
refer this for setting webdav in Windows..
http://acs.ucsd.edu/info/webdav.php
Regards
Kishor Gopinathan
Similar Messages
-
How to run .exe files with Virtual PC for Mac
Hey Guys, I'm new around here and with mac technology as well. Anyway, I have an iMac OS X 10.5.1 Leopard and I've recently purchased the Virtual PC for Mac 7.0.2 software. So I'd like to know how to use this program properly, because I need to run some executable files in my computer. It is confusing for me because I don't know how to get started, and I only get to the part when it says "OS not found, Install an OS on this hard drive".
Honestly I've no idea of what an OS is or where do I get that. So I'd really appreciate if one of you guys could tell me, step by step, what to do to use Virtual PC properly, and finally learn how to run .exe files on mac.
Thanks in advance!
Have a nice day!Always nice to see new faces
Honestly I've no idea of what an OS is or where do I get that.
This brings up the second part of your problem. The first part is setting up either a proper Virtual Machine program like Parallels or VMfusion, or setting up a Boot Camp partition on your drive.
http://www.parallels.com/
http://www.vmware.com/products/fusion/
OS stands for Operating System. You are running Leopard 10.5.7 as an operating system on your Mac (MacOS X).
The second part of your problem - You will need a copy of Windows XP or Vista if you want to run Windows on your Mac.
There is at least one other solution for running Windows programs on a Mac. It's called "CrossOver" by a company named 'Codeweavers'. It's based on a project for "Wine" to be able to run PC programs on a Mac or Linux, without having to buy or install Windows. It works with a narrow subset of Windows programs so you would want to make sure the program you want to run is compatible with CrossOver before you buy it.
http://www.codeweavers.com/products/cxmac/
In addition to all the above information, you need to upgrade your Mac to the latest 10.5.7 from 10.5.1. "Software Update" is located under the black Apple icon in the Menu Bar at the top left corner of your monitor. After you are updated you will want to update your Profile here so that it shows the proper OS version.
With your level of experience with MacOS X and the Windows OS's you should probably get some help from a local Apple store. They have an appointment system and do offer many types of help and training, and they can offer assistance with choosing the proper programs for you to purchase for your machine.
You are also welcome to continue to ask questions here, of course. You will want to ask your questions with different issues that come up in different threads so that the answers stay focused on the title of the thread.
Message was edited by: dechamp to try to be more accurate with a fairly complicated issue... -
How to run .exe files on macbook pro
Just bought my first macbook pro the other day. I absolutely love it. Much better than the windows boxes. I wanted to run some '.exe' files on my new laptop but was not successful finding anything on the market to use without purchasing a full OS version of Windows. Is there any software out there that I can use to run '.exe' files without purchasing a full Windows OS to do so. I know about parallels for MAC but that seems to require purchasing Windows OS? Any help is greatly appreciately.
Here are the specs on my Macbook Pro.
2.2GHz quad core i7
4GB RAM
500GB HDDSome Windows software -- not all, by a long shot -- will run on a Mac without installing Windows, with the aid of the CrossOver Mac emulator:
http://www.codeweavers.com/products/cxmac/
Games generally won't. For those, you need Windows installed through Boot Camp so you can run Windows natively. -
How to run .exe files in mac pro?
how to run .exe files in mac pro?
i am looking for this to play games in my mac pro.
if someone got a answer, just let me know
cheers.mailking wrote:
And I fail to see why you are attacking me...
My comment is Valid... " .exe files will not run natively on Mac OS X..."
I am sorry. I had the false impression that it was commonly known that .exe files did not run on Mac OSX natively and failed to see any constructive critique you were bringing. Maybe I am wrong. Again deepest apologies.
Unfortunately... these days... not every one is aware of this .exe fact..
Apology accepted.. and Thank You.. -
Enable to run .exe file which is created from .air file in windows 7?
Enable to open .exe file which is created from .air file which is created from adt command in windows 7 .
for run .exe file ::
The user must right click and select "Run as Administrator" for run successfully.
so How to remove this above permission issue in Windows 7?
Thanks
SunilRight-click on the exe file and choose Properties.
Switch to the compatibility tab and uncheck the box next to "Run this program as an administrator". Click "ok". -
Problem running .exe files
I cannot run .exe files on Windows 10. A pop-up window shows a message that the .exe file I am trying to run is missing. What can I do to solve this problem ?
Keep in mind that the Win 10 build "refresh" operations are clearing parts of the registry back to default values, so some things you've installed might end up uninstalled or only half installed after an upgrade to a new TP build.
What EXACTLY is going wrong? In other words, exactly what are you trying to do, and what is the exact content of the message(s) you're seeing.
Details matter.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
Can we run EXE file/ Another Java Program from Java Application? How?
Can we run EXE file and another java program from java application?
Thanks in advanceExample running adobe acrobat
String command = "C:\\Program Files\\Adobe\\Acrobat 5.0\\Reader\\AcroRd32.exe /t "+selectedDocument+" \\\\CONTROL\\HP LaserJet 4L";
Runtime rn = Runtime.getRuntime();
Process process = rn.exec(command);
process.waitFor();rykk -
How to run .exe files with DAQ on a target PC?
Hi,
I want to run LabVIEW executable files on a target PC, where there is no LabVIEW installed. These files are used to do measurement using DAQ devices.
In order to run these .exe file, I guess that I should install both LabVIEW Runtime Engine and NI-DAQmx on the target PC. Is it right?
I'm wondering if it is mantatory to install NI-DAQmx on the target PC. I tried running .exe files without NI-DAQmx installed, but there was an error: nilvaiu.dll couldn't be found. Shouldn't this file be included automatically when building the executable files?
Thanks,
QifuNo, none of the hardware drivers are included in the LabVIEW exe that you build. You have to install DAQmx. With LabVIEW 8.x, you can include the DAQmx driver with the installer that you create. You also have the option to install different versions of DAQmx. These different versions are smaller than the full DAQmx install (i.e. you may choose to install documentation, MAX. etc.). When you create the installer, you also inclue the LabVIEW run-time and you should also choose to install the hardware configureation that is in MAX.
-
Hi all,
Can anybody give me proper way to run exe file in
coldfusion. I have tried with cfexecute tag but it is not
working...
Thanks,
Manojtclaremont wrote:
> Are you trying to run an executable on the server, or on
the client machine?
> Does the CF service have execute permissions on the
directory in question? What
> does your error log say with regard to the attempted
execution?
>
To add to all these valuable questions, what executable are
you trying
to run, what kind of parameters does it need? It can be a bit
tricky to
pass complex parameters through the <cfexecute ...>
tag. -
What is the best way to run .exe files on my mac?
What is the best way to run .exe files on my mac? I need to run some updates for my john deere gps and the downloads i get can only be run on windows.
There are several options for running Windows software (*.exe files) on a Mac, depending what your program is, how often you use it, and your personal preferences.
One way that does not require Windows is an open source effort called WINE. Check out winehq.org. You may find that that's all you need for your programs. There is also a commercial effort that has grown from WINE, and you will find info about it on the site mentioned. These DO NOT require that you have and install Windows.
If you want to run sessions devoted only to Windows software, and want programs to run as fast as they do on a PC, the Apple's Bootcamp program is useful. With it you dedicate a partition on your hard disk to windows, and on startup choose to either boot into OS X or Windows. Each runs without any connection to the other. This requires you have a copy of the Windows software as well as the applications you want to run.
If you want to be able to easily exchange data between your Windows and Mac programs, and skip back and forth between the two, there are several emulators available that run on Mac OS X and create a Windows environment where many Windows programs can operate along side Mac programs. Parallels and VMwear are two comercial packages available for purchase and Virtual Box is an open source effort available for free. Google will find all three for you.
My only experience is with Virtual Box. It is slow and a bit clunky, but it is free and meets my needs for the very few "just got to have" windows programs I sometimes use.
Google is your friend on this and can provide a lot more, and better, information than I can.
Best of luck,
Ray -
Hello again everyone,
I have a .exe file and when I click on it a dialog box comes up asking me to choose an application that will run it.
Which application is it looking for? Or what application will make it run?Johnny
Mac's don't run .exe files. That's a windows pc file. If you have downloaded this, then you need to find the Mac version. -
I ran the Adobe installer for CC desktop and it failed. Error: 50 What happened? Now the Run.exe file is gone.
Hi,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena -
Run exe file while i'm using the program
hi there how can i run exe file while i'm using the program
Hi,
Hopefully HOST() command will do it. For more info about HOST() command look for documentation. Hopefully it will work fine. -
Hi All,
We are outsourcing services to our clients. One of our clients whom we manage the whole Active directory / Exchange 2010 infrastructure have a requirement.
We would like to run a .exe file from one server to another server / servers remotely to generate a report. The challenge is that we do not have permissions on some servers to access so we cannot login manually and run the .exe file to generate that report.
(All are in the same domain restricted or non restricted)
The domain Administrator (Client) Has restricted us to login to those servers due to security reasons. And is not providing us permissions or not giving the username and password to login to those servers.
Requirement is :
To run a .exe file with some parameters in it on the restricted servers Via powershell script or task scheduler (As the task will be created by the domain admin in the server in which we have access by entering the domain account).
As we have to run this .exe file on around 60 servers (restricted) so an option should popup asking the name of the agent in which you want to RUN the .exe file or a source input via CSV will also be fine.
Can anyone tell me or can this be possible ? Is there any one who has made such a script.
Can anyone please help.
Gautam.75801Hi Justin,
Thank you for the suggestion.
Below is the script what i Executed.
"C:\Windows\system32\PsExec.exe" @C:\HPS\Serverrlist.txt cmd /C "server name\C$\hps\hps.EXE"
Pause
I tried using PSExec. But in the LAB domain as well as in the production i tried this on servers in which i have full access. When i execute this i get the output as Access is denied. Below is the screenshot of the Error.
I have installed Psexec on both machines.
I have full admin rights to the shared folder or network location which i have scratched in the screenshot. Not sure why i am getting this error.
Also analysed the event logs and found a failure event once i execute this script.
A handle to an object was requested.
Subject:
Security ID:
Domain name\My username
Account Name:
Lg167978
Account Domain:
My Domain
Logon ID:
0x234992
Object:
Object Server:
Security
Object Type:
File
Object Name:
C:\Windows\System32\eventvwr.msc
Handle ID:
0x0
Process Information:
Process ID:
0x17e0
Process Name:
C:\Windows\System32\mmc.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
SYNCHRONIZE
WriteData (or AddFile)
AppendData (or AddSubdirectory or CreatePipeInstance)
WriteEA
ReadAttributes
WriteAttributes
Access Reasons:
READ_CONTROL: Granted by
D:(A;;0x1200a9;;;BA)
SYNCHRONIZE:
Granted by D:(A;;0x1200a9;;;BA)
WriteData (or AddFile):
Not granted
AppendData (or AddSubdirectory or CreatePipeInstance):
Not granted
WriteEA:
Not granted
ReadAttributes:
Granted by ACE on parent folder D:(A;;0x1301bf;;;BA)
WriteAttributes:
Not granted
Access Mask:
0x120196
Privileges Used for Access Check:
Restricted SID Count:
0
Can you help in solving this.
Gautam.75801 -
How to run Exe file through Sql server agent job
Hello All
i have 2 servers
1.Application Server
2.Database server
Application server has a .exe file so i wanted to run this exe file through SQL server agent job from database server.
What is the process for run this Exe file
Can you plz suggest me step by step process
KamalWhile i'm trying to implement this below method
Step1 : Right Click SQL Server Agent. Select New -> Job. This will open a wizard to schedule a new
job.
Step2 : Select Steps from options given on the left side of wizard. This is the main place to set your
exe\program as a running step. Give some name to this step, Select Operating System (cmdexec) for the Type and give the full path of exe in Text box for Command.
ex:\\10.11.00.98(your application serverIP)\ch.exe
Thanks vanchan-Please
mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I got this below error
Message
Executed as user:NJROSJ345\SYSTEM. The process could not be created for step1 of job
(Reason:Access is Denied)The step failed.
But i have sys admin rights on the both the servers
Kamal
Maybe you are looking for
-
recently purchased itunes match .but now every time i turn on itunes it starts to load song ect but after 5min or so it crashes and turns off
-
OnAlarm Time duration setting for OnAlarm in Pick activity
Hi, My internal sysnchronous transaction time is 120 sec. So when I call a PL/Sql procedure using the DB adapter synchronously, my process is throwing Timeout error. In order to come out from this I am thinking to have a Pick activity (similar like 1
-
What is the extension for mac mail in lion
What is the extension for mail in lion?
-
Regarding Customer Account group
Hi Guys, I've got confused at one step in Customer master. When i open my customer master, it shows me the description of account group but no code is visible. so tell me what settings are needed to be maintained in the screen here to make customer a
-
I experience strange vertical lines over the text
I experience strange vertical lines over the text. i belive it started when i updated my firefox to it's latest version i tried synchronizing me clear view, but it didn't help