Running fine, locks up and then starts beeping, 3 times

New iMac. Runs fine but sometimes it justs locks up and starts beeping. It's 3 beeps, pause, repeat.
What's the deal? Only way to stop is to power off with the button and reboot. Then all is fine, until next time.

Check your RAM, it sounds like you may have a loose, incompatible or bad module.
iMac (Mid 2007) and later models: About startup tones
Dennis

Similar Messages

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

I just upgraded to itunes 7.3 runs fine for 5 seconds then locks up

Hello, I am terribly sorry for botheriing you, but I have a problem. I just upgraded to itunes 7.3 and now it runs for 1 second and then locks up completely. Any idea what could be causing this?
Gateway PC Windows XP

This happened to me a couple of months ago. The way I solved it was by recreating my iTunes library (http://docs.info.apple.com/article.html?artnum=93313).
See if that helps you out.

I restarted my ipod touch and it ran out of power half way,now it will charge for one little bar and then start restarting again without charging until it runs out, it also wont show up on itunes, can you help me

i restarted my ipod touch and it ran out of power half way,now it will charge for one little bar and then start restarting again without charging until it runs out, it also wont show up on itunes, can you help me

the only other thing i can think of is the put the ipod into recovery mode
but as itunes cant find it, it may not work
hold the power button for 3sec's keep holding the power button now also hold in the home buttton the screen goes black
now let go of the power button keep the home held in the screen goes blue and shows the itunes with the cd and the up arrow with the usb cable, connect to itunes to start recovery mode.
or take it to an apple store fore them to help with recovery mode but this can take up to 3hrs
or try out www.ipodsurgery.co.uk

Something went wrong. To try again, reload the page and then start the workflow

We have a SP 2013 farm with Aug 2013 CU. While trying to start an SPD 2013 platform workflow from browser I get an error "Something went wrong. To try again, reload the page and then start the workflow."
I could also see the following in ULS:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean
isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials
(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|
microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll
This seems to be a bug and is solved in Mar 2013 PU but I have Aug CU. The web where I have this workflow has classic mode auth. Has anyone come across this error before?
I have checked the following:
1. Service
Bus Gateway and Service
Bus Manager Broker services are started
2. Authentication for this web application is Windows NTLM
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Thank you for the steps.
I have checked User Profile service and it is started and running fine. The user who is trying to start the workflow (me) has a profile created. I'm not starting wf as system account and my account is not added to web application user policy. Workflow isn't
even firing when I try to edit list item.
I tried to edit the list item as system account and workflow started this time. But it does to suspended state with the following message:
RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"SPRequestGuid":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"request-id":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["2"],"SPIisLatency":["1"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 24 Apr 2014 15:32:05 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
WhenI try to start wf I can see the first error:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

ERROR MASSAGE-"The update could not be installed.Plase make sure there are no other copies of firefox running on your computer,and then restart firefox to try again".

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/870411]]</blockquote>
"The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again"this kind of error massage i found but there are no other copies of Firefox running on my computer.So please solve my prob.I can not uninstall this because i have saved important bookmark on my system.When i start my Firefox that time browser is opening few times later may be it's my internet slow connection but everyone has slow connection internet they are not having this prob then why should i have this prob.Why it is taking little bit time to open?

Thanks for the info about Trojan. It may be the problem. Meanwhile I went to Admin/Owner side and did some cleaning -- including trying to reload my Favorite/Bookmarks that have always carried forth from previous levels of Windows XP and earlier.
The new computer here did not grab the Bookmarks from the previous, and yesterday I thought I had them loaded, and today went to Worker-Bee side and they are not showing.
About those add-ons... I have no idea, but think I got everything up to date yesterday. I will look at your earlier reply tomorrow or this weekend when I have more time at home to learn from it.
Thank you for your time in helping.
Late here, heading to sleep. Marilyn

An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
*C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
*(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
*C:\Program Files\Mozilla Firefox\updates
*Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
*Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Ipod touch screen went black and then started flashing. Then the turn off slide comes up.

Ipod touch screen went black and then started flashing. Then the turn off slide comes up. Restored multiple times and didn't work. Ipod works with Itunes fine (can put music and podcasts on the ipod), but can't take songs off of the ipod. Using windows xp and everything is up to date. Any ideas of how to fix it?

I didn't know that it was posted three times. My computer didn't say that it posted anything.
My ipod still syncs to itunes and I can put podcasts and music on my ipod, but I can't delete songs after I put them on the ipod. When I try to delete songs I try to delete it from the main music list on the ipod. It's also doing all the other stuff that I posted before. The screen will go black and then the power off slider thing shows up for a few seconds, then it'll show the unlock slider bar. Then goes black again. It will also do that when I have the ipod unocked and changing songs or playing a game. I've restored it to the factory default/new ipod and it still does the same thing. I've uninstalled and reinstalled itunes and then restored it again to the factory default and it's still doing the same exact thing. I checked and my computer is up to date.

"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again"

I'm using Firefox 4 Beta and I tryed install update but I dont got success. Now every time that I go start the browser is displayed the mensage: "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again"
My release is installed not in default drive C:\. I installed in the other Partition on my PC.
I don't have other release installed.

Try a clean re-install.
* Download the setup file from http://www.mozilla.com/en-US/firefox/RC (this is for the Firefox 4 release candidate)
* Uninstall Firefox, do not select the option to "Remove my Firefox personal data"
* Delete the Firefox installation directory - http://kb.mozillazine.org/Installation_directory
* Re-install Firefox
This process does not remove the Firefox user data such as bookmarks and passwords which are stored elsewhere in the profile folder.
You may also need to manually reset the Software Update feature by deleting the software update files as shown in the "Software Update not working properly" section here - http://kb.mozillazine.org/Software_Update

Something went wrong. To try again, reload the page and then start the workflow, error on starting a workflow

i have already create a custom workflow with sharepoint designer and checked for error and it seem fine. i published it on my document library so apprear the first issue : the column that contain the name of my workflow apprear and the link to start my workflow(contain
the name of my first stap) doesn't appear. the second problem is that when i tried to start the workflow manually on a specific document i get an alert : Something went wrong. To try again, reload the
page and then start the workflow
i tried : -restart service bus message broker -restart service bus gateway -recycle workflowMgntpool -flushed the dsn resolver cache and the problem still occure
on uls log viewer it seems to be an error on w3wp.exe process
the workflow history is empty

Hi Mokhtar,
For your first issue, when you publish a workflow to your document library, only after you start the workflow, then the link to go on the workflow(contain the name of the workflow stage) will appear.
For your second issue, my understanding is that you got an error when you manually start a SharePoint Designer 2013 Workflow.
Please go to Administrative Tools->Services, make sure the following services are started.
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service
Here are similar posts for you as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/12f8ae26-6889-4227-a3fc-dd29a38230a6/something-went-wrong-to-try-again-reload-the-page-and-then-start-the-workflow?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/277480.aspx
If the issue still exists, please check Event Viewer to check more information about this issue.
http://msdn.microsoft.com/en-us/library/jj193526(v=azure.10).aspx
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ERROR MASSAGE- "The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again".

"The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again"this kind of error massage i found but there are no other copies of Firefox running on my computer.So please solve my prob.I can not uninstall this because i have saved important bookmark on my system.When i start my Firefox that time browser is opening few times later may be it's my internet slow connection but everyone has slow connection internet they are not having this prob then why should i have this prob.Why it is taking little bit time to open?after that update prob when i installed the update file.

Firefox [[Safe mode]] is a diagnostic mode that allows troubleshooting.<br />
You start the same version, only some features are disable like add-ons (Tools > Add-ons > Extensions).
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\updates
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

My imac 2007 keeps crashing and then it beeps continuously

My imac 2007 keeps crashing and then it beeps continuously when starting up and just has a black screen.

Don't know what caused it other than RAM does occasionally fail.
Don't suppose you bought it from either Crucial or Macsales, as they guarantee their chips for life and will swap them over for replacements.
Sometimes, pulling the RAM chips out and re-seating them will get things working again.
Did you replace the original sticks or add to empty slots? It's often a case of trial and error to see which one/ones have failed. If the original chips were taken out and you still have them try pulling the chips that are currently installed and replacing them with the originals. Or, if the originals are still installed, just pull the additional chips and test. As I say, trial and error. Good luck!

Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it!, Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it!

Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it! Does it at home and work so not either broadband connection

jp270759 wrote:
Hi. MAny thanks for the answer. Am new to Apple - what's the "real" MacBook Pro forum?
I would like to know also!
For your issue - Solution may be found if you search in the "More Like This" section over in the right column.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

My Satellite L350 keeps switching off and then start up again.

Satellite L350 keeps switching off and then start up again.
The fan is free from dust. I reinstalled Windows
There is a new Battery for 1 year
If the laptop is off, the battery can be charged. The laptop is operating normally on battery.
From the moment that the AC adapter is connected, the computer turns off.
When I use the computer without a battery but with the AC adapter, the computer shuts down. Test with another AC adapter, the computer turns off.
Could it be that the cable between the motherboard and the DC jack is causing the problem whether this is unlikely ?
Anyone have an idea to help me with this problem ?

Dr. Lamp,
Shut down is not always at the same point. In the beginning this happened from time to time and than more frequently. If i start up the computer now with the AC adapter connected than he doesn't start up completely. He shuts down and reboot or blocked.
To answer your question, I am able to enter the BIOS settings.
I bought the Yannec battery here:
I summarize the tests that I did together:
Loading battery when computer is off = yes
Running applications only with battery = yes
With AC adapter connected = computer shut down and reboot
Without battery, only with AC adapter connected = shut down and reboot
With other AC adapter = shut down and reboot
If it is a problem of the motherboard is it not possible that it can be repaired rather than replaced by a new one?
Many thanks for your patience
+Message was edited: link has been removed - commercial+

I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded. Help - thank you

Could you share a link to the page?
Seeing it in context and in our browsers is much easier to debug.
If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

Running fine, locks up and then starts beeping, 3 times

Similar Messages

Maybe you are looking for