Running Forecast in the backgrd chooses Forecast from the INTERACTIVE mode

Folks
When I tried to run forecast through background job, instead of running the forecast based on the Master Profle & Univariate profile I had defined in the Activity, forecast is being run based on the Master Profle & Univariate profiles specified in the Interactive mode?
I had even tried by checking the "Always use job profile' checkbox in the background activity but this didnt work ?
Are there any other extra settings I need to make to overcome this problem ? Any ideas or suggestions ?
TIA
Edited by: Krishna Tummala on Jun 16, 2008 12:36 AM

Hi Srinivas
I do have one question based on your response. This scenario might not arise in the real scenario.
As each selection profile can be assigned with a different forecast profile in the Interactive planning/forecasting mode, what Forecast profile would the system use in mass processing, as the Activity assigned to background job can have only one Master and Forecast profile and the selected ID's in this example has more than one Master and Forecast profile.
Thanks

Similar Messages

Trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to do this on a macbook pro...please help

How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

I have 7 email accounts on my phone. If I tap EDIT while viewing the Trash folder in any of them I see "Mark All" on the left and "Delete All" on the right. If you tap any message, however, the legends go away.

I would like to be able to enter my own page sizes to use in the Book Module, rather than choosing defaults from the drop-down. Is it possible to do this?

I would like to be able to enter my own page sizes to use in the Book Module (to export to 3rd party printers), rather than choosing defaults from the drop-down. Is it possible to do this?

No. You are limited to the choices within the Lightroom Book module.

TS2756 For a USB connection for a personal hotspot I am requested to "Choose iPhone from the list of network services". Where do i find this list?

For a USB hotspot connection I am requested to "Choose iPhone from the list of network services". Where do I find this list?

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
Hyper-v platform Is grayed out and When i move the mouse point to Hyper-v platform it shows a message.
"Hyper-v cannot be installed: A hypervisor is already running"
When I try to install vmware it says..
VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v...
For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
and
https://communities.vmware.com/community/vmtn/developer/forums
Good luck..

App appears as installed in app store but not open and not run, and the icons are gone from the home screen

app appears as installed in app store but not open and not run, and the icons are gone from the home screenapp

Try quitting the App Store app and relaunching:
Closing Apps on iOS

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

Mac OS X v10.5: How do I remove the Macintosh HD icon from the desktop?

I am running Leopard, how can I remove the Macintosh HD from my desktop?

Choose Preferences from the Finder menu, click on General, and turn off the checkbox which controls it.
(31918)

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to delete the duplicated songs at the same time also from the source , hd

i have lots of song twice or tripple in the song list. the main reason is i have them also in the source hd dupplicated. It is not easy to find the dupplicated songs in the hard disc, they are in different files with different names but same songs . ı have to delete them by checkin the files each for every duppliceted song it is not possible practically.
but in i tunes i see them all in a list and can delete. but they will still be in hard disc. If for any reason i have to reload the files to itunes, they come again and i have to start form the zero point.
i want to delete them at the same time when i am deleting them on i tunes library.
this options is available on windows media player. there is always an option when i delete a song the software asks '' delete only from the list or also from the source? ''
is this optian available in i tunes ?

Ting,
Try this:
Insert a group on body_code. Then create a running total called Distinct Count. Field to summarize -> ID, Evaluate on change of group Group # 1 Body Code, and Never Reset.
Then insert a chart in the report header:
In the advanced layout, select body_code on change of and select Distinct Count running total in the Show values.
I hope I understood what you're looking to accomplish.
Z

Re:How can we delete the concurrent node entry from the FND_NODE table

HI ,
11.5.10.2 on Oracle Solaris on SPARC (64-bit) .
How can we delete the concurrent node entry from the FND_NODES table without running Autoconfig.
Currently we are having 3 nodes RAC and we are deciding to remove one node from the RAC and all 3 nodes are registered as concurrent node with application but concurrent manager is running only on one node.
Lot of the custom configuration we did it at application web tire level. If we run the Autoconfig at that time we need to redo those changes again that we are trying to avoid.
Regards .

we are trying to avoid to run FND_CLONE.setup_clean because it will delete all the nodes entries from the FND_NODES.If those entries are invalid then they should be deleted.
Running AutoConfig after purging the table will populate it with the correct entries.
In order to populate the nodes entries again we need to run autoconfig and it will change the server id in fnd_nodes and then we need to redo the ADI client configuration on users PC and redo all the changes that we made in jserv and webserver.For ADI Clients, you should use the correct server ids which will be populated in the table for you once you run AutoConfig.
For jserv configuration, you can refer to (Customizing an AutoConfig Environment [ID 270519.1]) to make the preserve all your custom setup/configuration after running AutoConfig.
If there any custom script to delete only one node from the fnd_node so that we don't need to run autoconfig after that, then I really appreciate.No.
Thanks,
Hussein

Running Forecast in the backgrd chooses Forecast from the INTERACTIVE mode

Similar Messages

Maybe you are looking for