Running FR reports with generic user id. Disable login prompt.
Hello All,
When running FR reports it tries use the logged user to connect to Essbase as well, but we want FR to run with a generic Essbase user id.
How do I make it work so that it does not prompt for username/password.
Thanks
Biadmin
Hi Ingo,
Thanks for your explanation. I was referring the configuration mentioned in the wiki article for displaying Xcelsius Dashboard in Infoview where this was explained as a possibility. Even though its not Lean.
Link: [http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinBOE+Infoview]
The only difference in my case is the use of SAP Authentication instead of Enterprise.
Thus as per your last update the following workflow is only valid:
1. User logins to Infoview using SAP Authentication.
2. User clicks on Xcelsius Dashboard Hyperlink object.
3. SAP Enterprise Portal login pops up within the Infoview Workspace.
4. User has to fill in the Login credentials again.
5. Dashboard load up successfully.
Please correct me in case I am wrong.
Thanks for the response.In case there is any other way this can be achieved, then please do let me know. Appreciate for all the help.
Regards,
V Fernandes
Similar Messages
-
Run a report with another user permissions
Hi,
I need that "normal" users run payroll simulation (report rpcalce0) with a more privileged user, and when the process ends the user must recover its original permissions.
An option is that normal users schedule a job with this report and setup it to be executed as another user (the privileged user), but my problem is with the execution results, because I need that this job runs inmediatly and the user could see the results of executions as it runs in foreground instead of a background job.
So I'm looking for a way to change the owner of a report execution for a while without the need to run it in background. My idea is that the normal user executes transaction and fills the selection screen, but then when the simulation starts it runs as privileged user, finally when the results appears the normal user takes the control again.
Is this possible??Hi javier,
1. I don't think there is any direct way to do this.
2. Bcos the standard sap program for payroll,
will always use sy-uname
to check the rights and privileges.
3. And we cannot modify sy-uname, for the standard program.
(not in case of foreground)
4. Neither call transaction or submit (for foreground)
has the facility / option for running the submitted program,
under some specified user name.
regards,
amit m. -
Problem opening reports with a user in the Oracle Directory.
I have already followed all the steps in the user's guide to run reports with a user in the Oracle Directory.
I accessed the enterprise security manager and created the mandatory xml publisher roles, besides I created another role. I added user A to the new role I created.
I accessed then the administrator tab in XML publisher. I went to roles and the role I created was there. When I tried to add a folder. I'm able to add the folder there. I click on apply and then when I enter in the security Settings again the folder is not there anymore.
I get the following error in the log:
[021207_103218621][][EXCEPTION] oracle.apps.xdo.servlet.resources.ResourceNotFoundException: /opt/oracle/infra2/j2ee/home/xmlpublisher
/Admin/Security/security.xml
When I access xml publisher with the user A, who belongs to the new role I'm working with, I'm not able to see any folder, nor anything else.
Do you have any ideas about what could be going wrong?
Thanks,
JoaquinCan you replay how? I have been facing this problem for nearly 3 months without any solution. Please help me.
Debarati -
Unable to run a report with chart
I have report rel.6 NT version installed on Windows 2000.Now I want to run my report with a chart.But after I finished the chart
wizard and try to run it,it gives me error.The error says that it is unable to create a PL/SQL Development Environment context.I also try it on Report Runtime
and it gives me error "REP-0074:Failure to run another product using SSL".Anybody out there can help me.Is it because of my operating system or ????Charlie:
I think we might be dealing with a bug: I have the same problem. I'm stumpted as well. Let me know if you make any headway. I think it might be best to call Oracle tech support.
Paul -
Running reports with OPS$ user
Hi, I've been using reports server 6i and I have a problem with ops$ users. I've configured the 'cgicmd.dat' file with database accesses like those:
server1: server=REPORTSERVER userid=ops$reports/password@service %*
server2: server=REPORTSERVER userid=user2/password@service %*
to launch reports through the http oracle web server, but doens't work and only works with non ops$ users. I get an web page error like that:
Database User Authentication
ops$reports:_______
password: ________
database: service
Someone told me about scape characters or something.
Any idea? ThxHi again, Ive try your idea but still doesnt work.
cmdcgi.dat reports server file config, I've add new entries:
/* non ops$ user: works*/
server1: server=REPORTSERVER userid=user2/password@service %*
/*ops$ user: doesn't work*/
server2: server=REPORTSERVER userid=ops$reports/password@service %*
/*html code $(&_#36;) : doesnt work*/
server3: server=REPORTSERVER userid=ops$reports/password@service %*
/*hex code %24 : doesn't work*/
server4: server=REPORTSERVER userid=op%24/password@service %*
So it seems only work server1 connection. -
Can not run complex report with ReportClientDocument using POJO beans.
Hi All,
Any help would be very appreciated I have been stack on this issue for the last 4 hours.
My report has parameters, a ResultSet and subreports that themselves have both parameters and ResultSet.
The report runs well in Crystal Report Designer but not on my application with ReportClientDocument API.
The excpeiton I am getting is:
======================================================================
Caused by: java.lang.NullPointerException
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.do(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.bs.a(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.bs.byte(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.a3.if(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.proxy.remoteagent.r.else(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.proxy.remoteagent.r.for(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.proxy.remoteagent.h.for(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
16:22:56,796 INFO [STDOUT] at com.tramada.documents.businessobjects.BODocumentProvider.generateDocument(BODocumentProvider.java:178)
16:22:56,796 INFO [STDOUT] at com.tramada.documents.service.impl.DocumentServiceImpl.generateDocumentContent(DocumentServiceImpl.java:125)
16:22:56,796 INFO [STDOUT] ... 58 more
This is my class that is trying to do the work.:
======================================================================
BODocumentProvider.java Created on 19/05/2008
This software is the confidential and proprietary information of Tramada
Systems Pty Limited.
package com.tramada.documents.businessobjects;
import java.io.ByteArrayInputStream;
import java.util.List;
import java.util.Locale;
import com.businessobjects.samples.pojo.POJOResultSetFactory;
import com.crystaldecisions.sdk.framework.CrystalEnterprise;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import com.crystaldecisions.sdk.occa.infostore.IInfoObject;
import com.crystaldecisions.sdk.occa.infostore.IInfoObjects;
import com.crystaldecisions.sdk.occa.infostore.IInfoStore;
import com.crystaldecisions.sdk.occa.managedreports.IReportAppFactory;
import com.crystaldecisions.sdk.occa.report.application.ISubreportClientDocument;
import com.crystaldecisions.sdk.occa.report.application.ParameterFieldController;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.application.SubreportController;
import com.crystaldecisions.sdk.occa.report.data.Fields;
import com.crystaldecisions.sdk.occa.report.data.IField;
import com.crystaldecisions.sdk.occa.report.data.ITable;
import com.crystaldecisions.sdk.occa.report.data.Tables;
import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
import com.crystaldecisions.sdk.occa.report.lib.IStrings;
import com.tramada.core.utils.SoftMap;
import com.tramada.documents.DocumentDataProvider;
import com.tramada.documents.DocumentDescriptor;
import com.tramada.documents.DocumentFormat;
import com.tramada.documents.DocumentProvider;
import com.tramada.documents.SubDocumentDescriptor;
import com.tramada.documents.businessobjects.model.Template;
import com.tramada.documents.model.DocumentContent;
import com.tramada.persistence.home.GenericHome;
Business Objects specific Document Provider.
public class BODocumentProvider implements DocumentProvider {
private static final String BO_AUTH_TYPE = "secEnterprise";
private boolean connect;
private String userName;
private String userPassword;
private String boURL;
private String documentsFolder;
private GenericHome home;
Local cache. Keeps track of document source for better performance.
private SoftMap<String, ReportClientDocument> cachedSources = new SoftMap<String, ReportClientDocument>();
// SETTERS & GETTERS
// SETTERS & GETTERS
public GenericHome getHome() {
return home;
public void setHome(GenericHome home) {
this.home = home;
public boolean getConnect() {
return connect;
public void setConnect(boolean connect) {
this.connect = connect;
public String getBoURL() {
return boURL;
public void setBoURL(String boURL) {
this.boURL = boURL;
public String getUserName() {
return userName;
public void setUserName(String userName) {
this.userName = userName;
public String getUserPassword() {
return userPassword;
public void setUserPassword(String userPassword) {
this.userPassword = userPassword;
public String getDocumentsFolder() {
return documentsFolder;
public void setDocumentsFolder(String documentsFolder) {
this.documentsFolder = documentsFolder;
// PUBLIC INTERFACE
Generates a document given its descriptor.
@param descriptor
valid document descriptor
@return Document (generated document).
public DocumentContent generateDocument(DocumentDescriptor descriptor, DocumentFormat format) throws Exception {
if (descriptor == null) {
throw new IllegalArgumentException("descriptor==null");
if (format == null) {
throw new IllegalArgumentException("format==null");
// get the document source.
// Can not use setDataSource() error code 2147483648?
ReportClientDocument document = getDocument(descriptor.getDocumentName());
ParameterFieldController parameterController = document.getDataDefController().getParameterFieldController();
// insert the main document parameters and there values
populateParameters(document.getDataDefController().getDataDefinition().getParameterFields(),
parameterController, descriptor, "");
// insert into the main document all the required data.
Tables tables = document.getDatabaseController().getDatabase().getTables();
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
String tableAlias = table.getAlias();
DocumentDataProvider provider = descriptor.getDocumentDataProvider(tableAlias);
POJOResultSetFactory factory = new POJOResultSetFactory(provider.getDataType());
document.getDatabaseController().setDataSource(factory.createResultSet(provider.getData()), tableAlias,
tableAlias);
// go through all the sub-documents and do the same thing as for the
// main document.
SubreportController subReportController = document.getSubreportController();
IStrings names = subReportController.getSubreportNames();
for (int i = 0; i < names.size(); i++) {
String subDocumentName = (String) names.get(i);
SubDocumentDescriptor subDescriptor = descriptor.getSubDocument(subDocumentName);
// get the actual sub document.
ISubreportClientDocument subDocument = subReportController.getSubreport(subDocumentName);
// insert the subdocument parameters.
populateParameters(subDocument.getDataDefController().getDataDefinition().getParameterFields(),
parameterController, subDescriptor, subDocumentName);
// insert into the main document all the required data.
Tables subTables = subDocument.getDatabaseController().getDatabase().getTables();
for (int j = 0; j < subTables.size(); j++) {
ITable subTable = subTables.getTable(j);
String tableAlias = subTable.getAlias();
DocumentDataProvider subProvider = subDescriptor.getDocumentDataProvider(tableAlias);
POJOResultSetFactory subFactory = new POJOResultSetFactory(subProvider.getDataType());
subDocument.getDatabaseController().setDataSource(subFactory.createResultSet(subProvider.getData()),
tableAlias, tableAlias);
// generate the report in the specified format
ByteArrayInputStream bais = (ByteArrayInputStream) document.getPrintOutputController().export(
getReportFormat(format));
byte[] content = new byte[bais.available()];
bais.read(content);
return (new DocumentContent(content));
Refreshes the connector and all its cached document sources.
public void refresh() throws Exception {
cachedSources.clear();
// PRIVATE ROUTINES
Populates the document parameters with there values.
private void populateParameters(Fields parameters, ParameterFieldController controller,
DocumentDescriptor descriptor, String documentName) throws Exception {
for (int i = 0; i < parameters.size(); i++) {
IField parameter = parameters.getField(i);
String parameterName = parameter.getName();
if (!descriptor.getParameters().containsKey(parameterName)) {
throw new IllegalStateException("missing parameter entry for '" + parameterName + "'");
Object value = descriptor.getParameter(parameterName);
if (value != null) {
controller.setCurrentValue(documentName, parameterName, value);
Retrieves the document source. If the source is not cached get it from
BO. First get the template name that is stored on BO.
private ReportClientDocument getDocument(String documentName) throws Exception {
ReportClientDocument source = cachedSources.get(documentName);
if (source == null) {
String templateName = getTemplateName(documentName);
if (userName == null) {
throw new IllegalArgumentException("user-name==null");
if (userPassword == null) {
throw new IllegalArgumentException("user-password==null");
if (boURL == null) {
throw new IllegalArgumentException("boURL==null");
if (documentsFolder == null) {
throw new IllegalArgumentException("documents-folder==null");
// login to BO
IEnterpriseSession enterpriseSession = CrystalEnterprise.getSessionMgr().logon(userName, userPassword,
boURL, BO_AUTH_TYPE);
IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
// get the application folder.
IInfoObjects folders = iStore.query("Select SI_ID From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Folder' And SI_NAME = '"
+ documentsFolder + "'");
if (folders.size() != 1) {
throw new IllegalStateException("documents folder '" + documentsFolder + "' not found on BO Server '"
+ boURL + "'.");
IInfoObject folder = (IInfoObject) folders.get(0);
// get the document identified by the template name.
IInfoObjects templates = iStore.query("select SI_ID, SI_NAME From CI_INFOOBJECTS "
+ "where SI_PROGID = 'CrystalEnterprise.Report' " + "And SI_INSTANCE_OBJECT = 0 "
+ "And SI_PARENT_FOLDER = " + folder.getID() + " And SI_NAME= '" + templateName + "'");
if (templates.size() != 1) {
throw new IllegalStateException("template with name '" + templateName + "' not found in folder '"
+ documentsFolder + "'on BO Server '" + boURL + "'.");
source = ((IReportAppFactory) enterpriseSession.getService("RASReportFactory")).openDocument(
((IInfoObject) templates.get(0)).getID(), 0, Locale.getDefault());
cachedSources.put(documentName, source);
return (source);
Returns the associated template name for the given document descriptor.
@SuppressWarnings("unchecked")
private String getTemplateName(String documentName) {
Template example = new Template();
example.setDocumentName(documentName);
List<Template> templates = (List<Template>) home.findByExampleExcludingAssociations(example);
if (templates == null || templates.size() != 1) {
throw new IllegalStateException("no template defined for document name '" + documentName + "'");
return (templates.get(0).getTemplateName());
Get the equivalent BO format for the given document format.
@param format
document format.
@return ReportExportFormat
private ReportExportFormat getReportFormat(DocumentFormat format) {
if (format.equals(DocumentFormat.PDF)) {
return (ReportExportFormat.PDF);
} else if (format.equals(DocumentFormat.WORD)) {
return (ReportExportFormat.MSWord);
} else if (format.equals(DocumentFormat.EXCEL)) {
return (ReportExportFormat.MSExcel);
return (ReportExportFormat.MSWord);
Best Regards
Khalef BessaihHello,
If I understand correctly, you create a local report which choose report from Report Server. You have two query parameters in the report which are returned by stored procedure. Currently, you cannot get default values for these parameters when run the report.
Based on my test, if we haven’t configure these parameter with Available Values, we can reproduce the same issue. Also, caching issue may cause the same issue. If the issue is persist, please delete the corresponding report in the report server. Then, redeploy
it to check.
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/en-US/6a548d65-35d0-4a3e-8b64-3b7b655c76ee/ssrs-2008-report-parameter-default-value-doesnt-work-when-deployed
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Windows XP see blank screen when remote desktop to Windows 7 with fast user switching disabled
All computers are in workgroup environment, no AD.
Windows 7 pro are configured with fast user switching mode disabled so that only one login session can run at a time. When a Windows 7 machine remote desktop to another Windows 7 machine, the remote desktop 'server' will give 30 seconds count-down for the
console logged in user to accept remote connection, or when timeout expires it kicks out the console logged in user. This is completely ok.
This become a problem when a Windows XP rd client try to remote desktop to these Windows 7 machines, Windows XP see a blank screen if the remote Windows 7 machine has a user logged in, as it is waiting for the user to log off first. This is not desirable
as our administrators want the console session to be logged out automatically if they (administrators) want to remote desktop in.
Is this a configuration problem? Is this a OS design, can't be changed?
Valuable skills are not learned, learned skills aren't valuable.Hi,
As I know, for RDP session in Windows 7, you don't need to configure the fast user switch option disabled. Windows 7 doesn’t support multiple Remote Desktop sessions by design, that means only one RDP session at a time.
I remote into my Windows 7 machine (which has a user logged in) from my XP machine, all work fine, the user logged in Windows 7 machine is automatically "kicked off".
May I ask a question? Does this issue happen in all XP machines? If you leave Windows 7 machine started and no user logged in, the RDP session in Windows XP established quickly?
I would suggest you keep latest drivers graphic card and latest updates paches for both Windows XP (Windows XP has come to its end of the lifecycle)and Windows 7.
Yolanda Zhu
TechNet Community Support -
Unable to schedule webi report with Test user
Hi All,
I get the below error when i try to schedule a WEBI report with user id.
I can schedule with my developer id.
Error Message: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'sudes_errors' (ID: 45941). Please contact your administrator if you require this right.
Any inputs greatly appreciated.
ThanksError clearly showing that, Test user need access rights defined @ CMC.
Contact BO admin, to assign Schedule/Full control rights for that Test user.
Thank You!!
H2H -
Unable to Schedule the Report with a user with Author Role.
Hi,
I tried to Schedule the Report using weblogic user(which has admin role) it worked perfectly. But when i try to login using User(which has author role) and when i try to schedule a report i am getting the following error. It is clustered Environment.
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID:/users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 6 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
Exceeded number of request retries for method GetResponseContent.
Can any one help me with this.
Thanks
Rondo.
Edited by: RONDO on Dec 12, 2012 4:07 PMCheck the Doc ID 1446877.1
As per this doc Fix to apply patch 13553428:
The fix to this issue is to apply patch for the following unpublished bug.
Bug 13553428 - QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
Patch 13553428: QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
The patch is available on MOS and can be applied to all platforms.
Or access via this link:
https://updates.oracle.com/Orion/Services/download/p13553428_111160_Generic.zip?aru=14732325&patch_file=p13553428_111160_Generic.zip
Please refer to the Readme. It is important to Stop the System before applying the patch. Then restart.
During restart Weblogic should automatically detect that bimiddleware.ear has changed in the OH and automatically redeploy the application
If helps pls mark as correct
Edited by: Srini VEERAVALLI on Dec 12, 2012 7:39 PM -
Run report with SSO/OAM by URL without prompt for uid/pwd?
Can I run a report by URL to a report engine protected by SSO/OAM without being prompted for credentials? Asking the same in another way, is there a way to pass the SSO/OAM credentials in the URL (or otherwise) to avoid being prompted for them? I find many references to how to do this for the database connection credentials, but I'm trying to pass the SSO/OAM credentials on the URL. My end game is to be able to run a report from VB.NET from a kiosk application in VB.NET where there is no attendant and client does not want to have to log into SSO/OAM at any time. My VB.NET code will submit the URL, grab the output and manage the work stream (print, save, store to doc repos, etc.) in the kiosk code.
Thanks in advance
Hank
12/29/2014
For the sake of those that come later with this same question:
It turns out there is a way to do this after all. I opened an SR with MOS and with a little trial and error we worked out that the following does work:
http://<theFormsReportsServer>:9002/reports/rwservlet?report=myTestReport.rdf&authid=myOAMUserId/mySSOPasswd&userid=dbUid/dbPwdK@DbTnsEntryName&destype=cache&desformat=html
Note that there are two necessary bits to this in addition to specifying the authid=SSO Credentials part. The first is that you must use the WLS_REPORTS port (9002 in our case), not the OHS port (8888 in our case). The other is that you must provide the database connection. I have done it overtly in this syntax by specifying userid=DbCredentials@Db, but it should also work to substitute the ssoconn functionality in order to hide the Db credentials. That is not an issue in our environment so i have not actually tested it.
Regards
HankHi;
It's been too long since I've done anything in Access. Have a look at this old sample, and see if it helps:
https://smpdl.sap-ag.de/~sapidp/012002523100006013432008E/rdc_vba.exe
Regards,
Jonathan -
Using Reporting Services Web Service methods to run a report with query parameters
I'm attempting to use the ReportExecutionService methods to process a report that contains four parameters, two of them query parameters. In total, the report must execute two queries. The two query parameters are determined by the execution of
the second query.
So, I've read about GetExecutionInfo and SetExecutionParams. To quote the MSDN page for GetExecutionInfo, "Use this method iteratively with the SetExecutionParameters method to evaluate parameters that have query- or expression-based defaults."
Can anybody explain how to use this, or any other method, to execute a report such as mine? The first query gets the rows of the report; the second query gets the row count. LoadReport does not seem to do the trick by itself. I need to use the technique
described in the quote above, I think.
I could really use some help. Thanks!Hello,
If I understand correctly, you create a local report which choose report from Report Server. You have two query parameters in the report which are returned by stored procedure. Currently, you cannot get default values for these parameters when run the report.
Based on my test, if we haven’t configure these parameter with Available Values, we can reproduce the same issue. Also, caching issue may cause the same issue. If the issue is persist, please delete the corresponding report in the report server. Then, redeploy
it to check.
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/en-US/6a548d65-35d0-4a3e-8b64-3b7b655c76ee/ssrs-2008-report-parameter-default-value-doesnt-work-when-deployed
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
How can I create a report with current online users of the application?
J.Hello Janis,
>> How can I create a report with current online users of the application?
What you are asking is not trivial at all, and not possible “out of the box”. How do you define an online user in a web environment? It’s not like the user have a continues/permanent connection with the web server. The following thread elaborate more on the subject - Identify currently active users .
If you have a specific need, or you are trying to solve a specific problem, and the referenced thread didn’t give you an idea for solution, please elaborate and will see if we can help you further.
Regards,
Arie. -
Receiving Error when running Crystal reports with Images in WebSphere 6.1
I am designing a report with a sub report that displays images via (BLOBS). The images are between 10-20 kb in size and there could be up to 200 images in the report.
There are no problems when I run the report using Java 1.5 with Tomcat 5.5 server and JDBC connection (using ojdbc14.jar) to an Oracle 10g database.
It seems that if I attempt to run the same report on a WebSphere 6.1 environment, the below error is encountered (stack trace is below)
I am using Crystal 2008 (ver 12.0.0.683).
Based on the stack trace, I think it is either an IBM JDK javax.* package compatibility issue or the current version of Crystal reports (no service packs installed - current client environment) has a known issue with Websphere.
I searched the forums for any similiar issues but could not find one.
Could installing Service pack 3 solve this issue or is there another possibility?
Any assistance would be greatly appreciated.
Thank you.
Tony.
Stack Trace follows (Needed to trim due to size, trying to keep unique messges) *******
ERROR [pool-14-thread-1] c.u.p.e.g.c.GenerateCrystalReport [GenerateCrystalReport.java : 211] Generate Report: Template =
pusehk08\evm$\EVM REPORTS 5.7.2010\Staging\TEARDOWN_COM.rpt, ReportSDKException caught: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:237) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:147) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:128) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:111) [CrystalReportsRuntime.jar:12.2.207.916]
at com.utc.pw.evm2.generatereports.crystalreports.GenerateCrystalReport.generateReport(GenerateCrystalReport.java:152) [classes/:na]
at com.utc.pw.evm2.generatereports.ReportThread.run(ReportThread.java:144) [classes/:na]
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:678) [na:1.5.0]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:703) [na:1.5.0]
at java.lang.Thread.run(Thread.java:811) [na:1.5.0]
Caused by: java.lang.VerifyError: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
at com.crystaldecisions.reports.common.image.ImageUtils.a(SourceFile:901) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.image.ImageUtils.if(SourceFile:873) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.JavaImage.do(SourceFile:183) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.CrystalImage.createImage(SourceFile:50) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.formatter.objectformatter.FormattedBlobFieldObject.if(SourceFile:103) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.formatter.objectformatter.FormattedBlobFieldObject.<init>(SourceFile:57) [CrystalReportsRuntime.jar:12.2.207.916]
[CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.formatPage(SourceFile:236) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:96) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:247) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:642) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54) [CrystalReportsRuntime.jar:12.2.207.916]
at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337) [CrystalReportsRuntime.jar:12.2.207.916]
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:223) [CrystalReportsRuntime.jar:12.2.207.916]
... 8 common frames omitted
2010-07-20 15:57:11,147 ERROR [pool-14-thread-1] c.u.p.e.g.ReportThread [ReportThread.java : 233] Attempt to generate report TEARDOWN using
pusehk08\evm$\EVM REPORTS 5.7.2010\Staging\TEARDOWN_COM.rpt for E733570-01 failed: Generate Report: Template =
pusehk08\evm$\EVM REPORTS 5.7.2010\Staging\TEARDOWN_COM.rpt, ReportSDKException caught: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;, REPORTSDKEXCEPTION
2010-07-20 15:57:11,147 ERROR [pool-14-thread-1] c.u.p.e.g.ReportThread [ReportThread.java : 238] Exception was caught trying to build report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: javax/imageio/metadata/IIOMetadata.getAsTree(Ljava/lang/String;)Lorg/w3c/dom/Node;
Edited by: Liro9999 on Jul 21, 2010 1:55 PMThank you for your reply.
The answer to your question concerning if Websphere is a clean install is no. The client has other applications running on that server. We do not have access to that server other than the log files and I requested information as to what other applications are on the server.
We did try adding a known working version of the IIOMetadata class in the ear file and deploying it in the hopes that class will be loaded before using any other version. Unfortunately, we receive the posted errors. Which may mean that a different version of the class has already been loaded in memory and that is the one being accessed. A request would have to be made to the client for a shutdown and restart of Websphere in determining if that may be the case. Since there are other applications running, coordination and communication to the other application owner will need to be done first.
Any additional ideas will be appreciated.
Thank you.
Tony. -
The page cannot be displayed while running the report with web link
Hello,
I tried to run the report using a web link similar:
http://hostname/reports/rwservlet?report=WRFTCKL.rdf&userid=use/pass@datbase&desformat=pdf&destype=CACHE¶mform=yes
I am able to see the parameter form, but after I entered some parameter and submit, I got an error as:
The page cannot be displayed.
But if I run it with the paramform=no and attached the parameter/value pair at the end of the link, the report will show on the web.
Anyone knows what is wrong?
Thanks.try this sample report from
http://www.alexyscorp.com/products.htm
(Download the Forms Reports Integration based on run_report_object (FMB,RDF) ) -
Run a report with a different login
We have an application that must run reports against different databases.
Is there a way to change the connect string when running reports with the run_report_object built-in, or do I have to use web.show_document for that purpose?
Cheers
ChristianHello,
Two solutions :
1)
repid := FIND_REPORT_OBJECT('reportname');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'LOGON=NO USERID=un/pw@db');
st := run_report_object (repid);
2)
declare
pl_id paramlist;
repid report_object;
st varchar2(100);
begin
destroy_Parameter_List('tmpdata');
pl_id := create_parameter_list ('tmpdata');
add_parameter (pl_id, 'logon', text_parameter, 'NO');
add_parameter (pl_id, 'userid', text_parameter, 'un/pw@db');
repid := FIND_REPORT_OBJECT('reportname');
st := run_report_object (repid, pl_id);
end;
Regards
Maybe you are looking for
-
How to remove Homegroup and Libraries icons from 7 RC desktop (after Vista upgrade)?
I took the plunge and upgraded my Vista 64 to Win 7 RC. The upgrade process lasted over 6 hours (some 300GB on my C:drive with Vista), but, once completed, it has been working really very fast & smoothly. The original Vista system is backed up of cou
-
Serial number off pkg is not accepted to start program
Serial number is not accepted to start program. serial number is off of pkg as requested.
-
I get no sound when I play back the videos I've loaded on my touch (video plays, but silently)
-
Load the Budget value at cost center level only
Hello All, Can we load the budget value at the cost center level only with out using cost element . I have seen that we can from actual to budget in Kp98 at the cost Center level. Thanks , Krishna
-
Searching for a podcast by keyword???
I find the iTunes interface frustrating. There are categories for podcasts but I can find no way to search for a particular subject or keyword. Is this hidden somewhere or does Apple just not want searching this way?