Running iTunes and Keynote together?

I'm a Mac veteran, but pretty new to using Keynote. Seem to be stumped on a silly issue. Is it possible to run a Keynote presentation while playing items from iTunes? I can't just set songs to play along in Keynote, I need the control of iTunes to start and stop music during my presentation.
Seems like a "duh" thing, but I can't get it to work.
Surely, surely this is possible. If not, maybe someone knows of some share/freeware that can handle it?
Thanks in advance for the help.

I'm sorry to hear that you lost your project because of RSD. My macbook suffered a fatal RSD and could power on. I sent it to Applecare. It has been 9 days and I still haven't gotten it back. I don't have backup of data either, yet I could do nothing.
I find the cause of RSD:
The cable between the heat sensor and the CPU's heat sink.
"The heat sink expands during operation and gets into contact with the sensor cable and melts the cable isolation. This in turn causes a short circuit and, thus, the immediate shutdown of the MacBook. As the heat sink is cooling down, the heat sink contracts to the point that it looses its contact with the cable and breaks up the short circuit.
Sometimes if the MacBook turns on immediately it will not turn on and one might have to wait for minutes to turn it on. However it would randomly shutdown after some time. The frequency will gradually increase..."
Reference:http://en.wikipedia.org/wiki/RandomSystemShutdown
http://en.wikipedia.org/wiki/MacBook
What AppleCare normally do is to change a logic board for you.It's obvious that the problem lies in the faulty design. If apple doesn't correct the faulty design, no matter how many times they change logic boards for you, it won't solve the problem.
What about the SMC update? Does it help?
"It lets the fans run on high speed for about 10 seconds."
Imagine there's a bomb hidden inside your macbook, ironically, apple gives such a solution as to let your fans run at high speed to prevent possible explosions.
Do you think you can stay peaceful on mind?
Reference:http://en.wikipedia.org/wiki/Talk:MacBook#RandomShutDowns

Similar Messages

  • While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First "iTunesHelper was not installed correctly. Please reinstall iTunes. E

    While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)” occurred. Following directions found at https://discussions.apple.com/message/15087646#15087646, I now get the following “iTunes.exe - System Error The program can't start because AVFoundationCF.dll is still missing from your computer. Try reinstalling the program to fix this problem.”, Along with “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)” I am running Win 7 Ultimate 64 bit on HP TouchSmart tx2-1275dx. I was one week away from buying an iPad but not if this is what I have to deal with. Please help

    I actually managed to resolve this on my own by downloading iTunes from the Apple website and reinstalling iTunes that way. Here's the link: http://www.apple.com/itunes/download/ That should fix your problem. Good luck!

  • TS1277 iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!

    iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!

    I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance. 
    Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows.

  • HT1199 Can  I run iTunes and Apps on my Windows 7 computer or do I need an ipad or iphone ?

    Can I run ITunes and Apps on my Windows7 computer. So  far the one App I have downloaded just won't run. Do I need an iPad or IPhone to run these programmes?

    There is an iTunes on the idevices, just a Store effectvily.
    There is an iTunes on a PC and Mac, which is the Library handler, and connects to the iDevices for sync and backup.
    The Apps that you download for iDevices are downloaded with "Appstore" on that iDevice itself, or downloaded on the Mac or PC with iTunes for transferring to the iDevice.
    That apps will only run on the iDevice.
    For Window s7 and Windows 8 there has just been released a new iTunes version 11.
    Lex

  • TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

    I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
    However...
    I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
    I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
    The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
    Any help please on this would be appreciated!
    Pete

    See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
    tt2

  • When an internet connection is available, I run iTunes and it shuts down on my Windows 7 64bit computer.

    When an internet connection is available, I run iTunes and it shuts down on my Windows 7 64bit computer.  It used to crash when I went to the iTunes store but, after installing the newest version of iTunes it crashes if there is an internet connection.  I can turn off my internet access and then run the software but, once I try the iTunes store again it crashes.  It does not give an error message as to why its doing this.  Just says it encountered a problem.  I cannot do anything with my iPad or iPod without this working.  Its extremely frustrating.
    I have also contacted Apple several times and they give me links to other's problems but, none have worked to fix this.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.

  • Just another data point on the Itunes/Win8 issue. My AppleTV, AppleRemote (in IP5), and Win7 machines all play well together. Sharing, control, etc all work fine. Alas, my Win8 desktop, running Itunes and sharing on, shows no sign of network life.

    A bit more detail: AppleRemote controls AppleTV properly and sees the Win7 machine's shares. The Win8 desktop has updates installed for Itunes and all drivers. Itunes runs fine but does not share even though the computer is authorized and Sharing is turned on.
    I have disabled the Windows Firewall and also disabled the MS Kernel Network Debugger. Neither AppleTV nor the AppleRemote App appear to be aware of the Win8 Itunes share at all.
    Any suggestions or help are appreciated. From the looks of the posts, it appears that others are struggling with this one also.

    I decided to keep my old 20" Core Duo iMac as a Server in the bedroom, and now use it as a television and PVR as well. I wouldn't have made much on eBay anyway.

  • How to download and run iTunes and Quick Time in English?

    I just bought a new Windows laptop and tried to download iTunes and QT. But after I've downloaded it and try to "Run" (and install), a Chinese window appears and I can't read Chinese. My OS (XP) was installed in English, what is the problem?

    download and install http://www.mediamonkey.com/ its free
    I just bought a 4th gen nano today, and running windows 2000.
    This was my first ever Apple product, and i was pretty angry when i ran into the same problem as you. with some frustrating research I found MediaMonkey and listening to my new iPod as i type this

  • HT1923 I am trying to run iTunes and have been advised that i must uninstall and install again. However, in Control Panel, I don't have the option the uninstall. HELP!!!

    I am trying to run iTunes. When I do I get this message "Apple Application Support was not found. Apple Application Support required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Wiindows error 2)" . However, in Control Panel, there isn't an option to remove or unistall iTunes, only an option to repair.
    Now, when I dowloaded iTunes, i saved it to my flash drive so that i can have it with me whereever I go. I am not sure if the problem stems from there. I also did this so as not to save it on my work computer but still be able to run it from my flash drive.
    Please HELP. I miss my music and podcast.

    This solved my question by b noir  on Aug 26, 2011 7:23 PM
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Problems running iTunes and QuickTime on 17" MBP

    I recently got a 17" MBP with 4MB memory from work. Everything works perfectly so far except iTunes and Quicktime. Whenever either program is open the machine completely bogs down even if nothing is playing. I've re-installed the software and repaired permissions to no avail. Obviously it's frustrating to have my 5 year old PC laptop run Apple software better...
    Any help would be appreciated!

    I'm having the same problem....driving me crazy...I've tried everything...turning off my virus and firewall center....deleting it...reinstalling it from the disk and the site....and I keep getting Error code on the QT of 3 and I don't remember the one of Itunes but it won't run unless QT is installed....HELP!!!!

  • Running iTunes and iPhoto through external hardrive.

    Howzit.
    I need help, my memory capacity is FULL, i would like to run my itunes and iphoto options (completely) through an external hardrive to free up space on my mac.
    Please explain clearly and sytematically I'm a beginner and learner yet.
    Thank you so much

    iTunes is simpler than iPhoto at doing this, as it has the ability in its preferences to use a different folder for organizing music. However, I would warn against doing this, as external hard drives have been known in the past to disconnect, and have problems with Spotlight indexing a lot more frequently than with internal drives. Also to add to that, it makes backing up such files harder as a simple clone of your internal drive won't backup the files you move to the external. You'll have to manually backup those files elsewhere whether DVD, or a second external hard drive. Here's my FAQ on backing up:
    http://www.macmaps.com/backup.html
    If you are willing to take the risks involved and are prepared to work with them, I believe you can do this by Quitting from iPhoto and making a Unix shortcut to the external drive replacing your existing Pictures folder on the internal drive once the Pictures folder is on the external drive. I'm not sure which command line ln command makes the right type of link, but I'm sure with some research you can find it.
    Edit: your Powerbook will take up to 160 GB internal ATA/IDE 2.5" hard drives. You might want to seriously consider getting that.

  • Bought the new iPad and it's up and running, itunes and the app store are working well but when I try to open up either FaceTime or messages they won't open and a message appears cannot open try your connection.  Help what is not right.

    Have just bought the new iPad, everything working fine including iTunes, the app store and iCloud but when I try to log in to both FaceTime and imessage an error message comes up saying it cannot connect and to check my connections.  What am I doing wrong.

    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
     Cheers, Tom

  • Setting up and running iPhoto and Aperture together.

    I'm trying to figure out if it's possible to use iPhoto as my main image library. I want to be able to import pictures from my camera straight to iPhoto. But i would like to also have it set up to be able to edit pictures in Aperture but save them back into iPhoto.
    Basically i would like to have my library contained in iPhoto but edit pictures using Aperture. Also if there is anyway to get this same setup using Adobe Lightroom.
    I just really love the speed you get from iPhoto, But I love the feature set from Aperture and Lightroom.
    Any help is greatly appreciated.

    Here is something I tried when I downloaded the trial version of Aperture 3.
    I had a picture in iPhoto that I liked but had a blemish that spoiled it. The blemish was a dark black line at the top margin. Nothing I tried using the retouch tool in iPhoto removed the blemish. So one of the first experiments I made was to move this particular photo into Aperture 3 and use the retouch tool there. The blemish was gone in one swipe.
    Next I dragged the photo to the desktop, then opened iPhoto and dragged the picture into "Events" and finally into the specific event it belonged to. The Aperture edit held.
    Is this not one way to use the two together? I cannot retest the process because my trial download has long since expired. I didn't have time to really get to know Aperture in the trial period and so have not bought it.
    Further, I recently Googled "integrating iPhoto + Aperture" and found this:
    +iPhoto - Because of the availability of options for books, cards, and calendar templates, you might want to use your Aperture pictures in iPhoto. To access the images from your Aperture Library within iPhoto, click on File > Show Aperture Library. When the window opens, you can browse, select and drag the images you want to use in iPhoto.+
    +The tight integration of all Apple software, and even with some other 3rd-party applications, makes it possible to make the most out of your photos in Aperture.+
    Again, because I don't have Aperture 3, I can't test this process. But I thought it suggested a fairly simple way to do what I want to do. Has anyone tried this?
    (PS. I am interested in Aperture because I shoot exclusively in RAW.)

  • Running CF9 and CF10 together on Mac with Snow Leopard

    This may be a very basic question, but I am trying to set up CF10 to run alongside CF9 on a developer installation on my Macbook with Snow Leopard. I can see both administrators, CF9 on localhost and CF10 on 127.0.0.1:8500. It seems that both are runing on JRUN because I can't run CF10 without having CF9 running.
    How do I set up a site to run on CF10 only? I can't figure out how to set up the virtual host files to have the site determine which version to run. If I set up the virtual host in Apache2 httpd-vhosts.conf file, it seems to run the site using CF9 and it breaks because it has to run on CF10. If I set up the server.xml file as if it was using Tomcat, then it seems to break the ability to get to the administrator app in either CF9 or CF10 to run.
    Any ideas out there to help me?

    Do you mean like this? First, copy the URL. Next, open up TextEdit. Here, you can paste the URL. Next, highlight the URL, right click it and select "Make Link". After that, press the arrow key or click in a blank spot on TextEdit. Select the link, and type in the new name of the link. You have now successfully created a hyperlink.

  • What creates a windows error 126 when installing/running iTunes and how do you fix it?

    My install and reinstall keep failing with the above message.  It also states MSVCR80.dll is missing.  How do I resolve this issue?  thank you.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for