Running JRA recording with Weblogic running as a service

Is it possible to run JRA recording while running the WebLogic application server as a service?
The spec for our environment is as follows:
- JRockit JVM version: JRRT 3.1.0 1.4.2
- Weblogic version: 8.1 SP6
- OS: Windows XP SP3
Ideally, we would like to be able to run JRA recording every hour as an automated process, however as there is no java.exe process to attach to it seems this might not be a possibility? I appreciate is certainly possible to run the application as a console application and attach to the PID of a running java process using JRCMD if WebLogic is not running as a service. Are there any solutions for taking JRA recordings when JRockit is running in a Weblogic Service?

Tim,
You can try to run beasvc.exe in debug mode, from a command prompt after the
server is booted. You can run it by: >beasvc -debug ...
This will simulate the service being started in the foreground so that you can
see output messages. You may be trying to run beasvc in a way that is not
intended. If you continue to have issues, you should open a case with BEA
Support.
Regards,
Glenn
Developer Relations Engineer
BEA Support
Tim Isenhart wrote:
I want to collect performance data from weblogic running as a service. I
customized the commandline in the installSvc script and inserted a profiler
class in front of weblogic.Server.
When i start the service, beasvc crashes.
How can i work around this without resorting to running a manual script ?
Thx,
Tim

Similar Messages

Running DAQ-9188 with LV13 runs great on developing machine not on target machine

Hi
Running DAQ-9188 with LV13 runs great on developing machine, built exe, transferred to new machine and I cannot get the values to update. Front panel opens everything looks good but no updated values, and no errors. Can someone help? Thanks.

Looks like others are pointing you in the right direction let me just add a few things.
You must have a project to build an EXE. You add VIs to the project and then under the Build Specifications in the project you can right click and create a new EXE build. Here you must specify what the top level VI is which is the thing that gets ran when you run the EXE.
After that you need to make an installer. To do this go back to the project, and right click Build Specifications but this time make a build for the Installer. Here you need to say what things to include in the installer. You can choose to include the EXE you built earlier. In addition to that under the "Additional Installers" section you can choose to add other installers. The default one selected will be the run-time engine. That thing you went and downloaded.
Other things you'll need depend on what is in your EXE. Did you use DAQmx? Then you'll need to include it in the additional installers. Did you use XNET? Include it. Did you use Report Generation? Internet Connectivity Toolkit? Vision? VISA? etc.
It is some times hard to know what to include that's why in 2013 NI added a feature to try to can for things you used and include them.
Including these things will balloon the installer. Expect several GBs for the installer if you used DAQmx and other things. Once these are installed on a new machine you can make an update installer that doesn't include these things, and just includes the updated EXE.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

I canu00B4t run various records with BAPI_NETWORK_COMP_CHANGE

If I run the BAPI with several component to update the field WITHDRAWN, the records are not updated.
Now if I run one compomente updating the data correctly.

Hello
You need to fill structures for all components.
Like this:
BAPI_NETWORK_COMP_CHANGE-COMPONENT = " <- set number here (let it be '000000000000001')
BAPI_NETWORK_COMP_CHANGE-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CHANGE.
BAPI_NETWORK_COMP_CHANGE-COMPONENT = " <- set other number here (let it be '000000000000002')
BAPI_NETWORK_COMP_CHANGE-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CHANGE.
BAPI_NETWORK_COMP_CNG_UPD-COMPONENT = " <- set number here ('000000000000001')
BAPI_NETWORK_COMP_CNG_UPD-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CNG_UPD.
BAPI_NETWORK_COMP_CNG_UPD-COMPONENT = " <- set other number here ('000000000000002')
BAPI_NETWORK_COMP_CNG_UPD-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CNG_UPD.
CALL BAPI .......

Query run time increases with subsequent runs.

Hello All
I am looking for some hint about if someone else has faced such an issue in OBIEE
We are trying to enhance performance of some OBIEE Analysis reports. Every time we do a change and deploy out changes the report runs very quick like in 40 seconds . Even when I run the physical query in the database it runs quick as well. After few minutes we run the report again it take 10 minutes and then after some time we run it again it takes 20 minutes. It stabilized around 30 minutes.
We thought it needs more tuning. We tried some more, removed outer joins from the RPD, tuned those joins where we are fectching large amounts of data and deployed it again. Again the first time we ran the report it returned results in less than 30 seconds. Ran it again and it took 6 minutes. And again around 9 mins.
Once again the physical SQL is quick too in the database.
The first time we run the report we are happy to see the run time but subsequent runs take so long.
This is a test envt. so there are not huge load on the database. Also currently we dont have any caching enabled but we may do that as well.
I am just curious to see if anyone has faced something like this. I am running out of options on further tuning the views and joins that we are using. I am not able to think, why the first time we check our reports they run fast and this behavior is so reproducible now. And every time we start with our changes we delete all presentation layer cache etc.
Thanks

query caching is primarily a run-time performance improvement capability.and over a period of time, performance tends to improve due to cache hits for more refer this Managing Performance Tuning and Query Caching - 11g Release 1 (11.1.1)

Late 2014 iMac 5K running unusually slowly with fans running at high speed

Problem description:
iMac 5K
The computer is running unusually slowly although it is not experiencing high CPU utilization.
The computer's fans run at high speed although the computer is not experiencing heavy usage.
Apple Diagnostics points to SMC problem.
SMC and PRAM resets have not worked.
See Etre Report below.
Thanks for help.
Herbie49
EtreCheck version: 2.1.8 (121)
Report generated 30. März 2015 07:32:40 MESZ
Download EtreCheck from http://etresoft.com/etrecheck
Hardware Information: ℹ️
    iMac (Retina 5K, 27-inch, Late 2014) (Technical Specifications)
    iMac - model: iMac15,1
    1 4 GHz Intel Core i7 CPU: 4-core
    32 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 0/DIMM1
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM1
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    AMD Radeon R9 M295X - VRAM: 4096 MB
        iMac spdisplays_5120x2880Retina
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:31:53
Disk Information: ℹ️
    APPLE SSD SM0512F disk1 : (500,28 GB)
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh SSHD (disk1s2) / : 499.42 GB (251.32 GB free)
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
    Samsung SSD 840 EVO 750GB disk0 : (750,16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Herbies Daten (disk0s2) /Volumes/Herbies Daten : 749.30 GB (299.14 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/Toast 11 Titanium/Spin Doctor.app
    [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        /Library/Application Support/Symantec/AntiVirus
    [not loaded]    com.symantec.kext.SymAPComm (11.1.2f18) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.Logitech.Control Center.HID Driver (2.4.0) [Click for support]
    [not loaded]    com.symantec.kext.internetSecurity (1.3.2f5) [Click for support]
    [not loaded]    com.symantec.kext.ips (3.2f8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
    ProTec6b: Path: /Library/StartupItems/ProTec6b
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [running]    com.symantec.uiagent.application.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.symantec.avscandaemon.plist [Click for support]
    [running]    com.symantec.diskMountNotify.plist [Click for support]
    [failed]    com.symantec.MissedTasks.plist [Click for support]
    [loaded]    com.symantec.navapd.plist [Click for support]
    [loaded]    com.symantec.navapdaemonsl.plist [Click for support]
    [loaded]    com.symantec.Sched503-1.plist [Click for support]
    [loaded]    com.symantec.Sched505-3.plist [Click for support]
    [running]    com.symantec.sharedsettings.plist [Click for support]
    [running]    com.symantec.symdaemon.plist [Click for support]
    [failed]    com.symantec.symSchedDaemon.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
    [loaded]    de.meilenstein.MSTFirstRunInstaller.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.adobe.ARM.[...].plist [Click for support] [Click for details]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    de.starface.STARFACE-Client.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Notizzettel    Programm Hidden (/Applications/Stickies.app)
    Adobe Reader    Programm (/Applications/Adobe Reader.app)
    Dropbox    Programm (/Applications/Dropbox.app)
    SpyderUtility    Programm (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
    PopChar    Programm (/Applications/PopChar.app)
    STARFACE Client    Programm (/Users/[redacted]/Desktop/STARFACE Client.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.2.8 [Click for support]
    AdobePDFViewerNPAPI: Version: 10.1.5 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 10.1.5 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    RealPlayer Plugin: Version: Unknown
Safari Extensions: ℹ️
    1Password
    ExifExt
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Growl [Click for support]
    Norton\nQuickMenu [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh SSHD: Disk size: 499.42 GB Disk used: 248.10 GB
    Destinations:
        Backups [Network]
        Total size: 6.00 TB
        Total number of backups: 39
        Oldest backup: 2015-01-31 05:27:48 +0000
        Last backup: 2015-03-27 20:28:54 +0000
        Size of backup disk: Excellent
            Backup size 6.00 TB > (Disk size 499.42 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         0%    Dropbox
         0%    SymDaemon
Top Processes by Memory: ℹ️
    241 MB    Mail
    206 MB    Finder
    172 MB    Safari
    137 MB    Stickies
    137 MB    WindowServer
Virtual Memory Information: ℹ️
    29.20 GB    Free RAM
    2.79 GB    Active RAM
    721 MB    Inactive RAM
    1.64 GB    Wired RAM
    1.34 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 30, 2015, 06:58:02 AM    /Library/Logs/DiagnosticReports/deleted_2015-03-30-065802_[redacted].crash
    Mar 30, 2015, 06:55:24 AM    Self test - passed

First uninstall your antivirus. Use only a vendor-provided uninstaller or uninstallation instructions. Never remove files by hand. Never use an "app zapper".
If that doesn't fix it, take it back to Apple for service.

How can i records with date format using web services?

Hello
I can't record date records using web services. I get no message errors.
I can import string values but no dates (YYYY-MM-DD). Do you have any clue about that?
Regards
Arturo

hello,
That's the code I'm using to update an opportunity. In the date fields (e.g. dFecha_de_entrega_al_cliente) I've tried to put an specific date in the correct format (If i put it in another format i've got an error message due the wrong format). The CRM accepted the code but it didn't update the values that are different of string.
I don´t know if there is something missing in teh program or if the developer environment is not the adequate.
Regards for your comments
Arturo
Private Sub ActualizarOportunidad(ByVal fila As Data.DataRow, ByVal TipoPersona As String)
Dim oLog As New Log()
Dim IdLog As Integer
Dim NumSerie As String = ""
Try
oLog.Insert_Log("Activación Garantía - Crear Oportunidad", oLog.GetLastIdProceso())
IdLog = oLog.GetLastId()
Dim sr_input As Opportunity.OpportunityUpdate_Input
Dim sr_output As Opportunity.OpportunityUpdate_Output
sr_input = New Opportunity.OpportunityUpdate_Input
Dim sr(1) As Opportunity.OpportunityData
sr(0) = New Opportunity.OpportunityData
NumSerie = fila("NumeroSerie").ToString().Trim()
sr(0).ExternalSystemId = NumSerie
sr(0).OpportunityName = fila("NumeroSerie").ToString().Trim()
sr(0).SalesStage = "Deseo" '"Cerrada/Ganada"
sr(0).dFecha_de_entrega_al_cliente = fila("FechaEmision").ToString().Trim()
sr(0).dFecha_de_facturacin_al_cliente = fila("FechaCompra").ToString().Trim()
sr(0).stNro_Factura = fila("NumeroFactura").ToString().Trim()
sr(0).plActividad_Economica = fila("IdActividad").ToString().Trim()
sr(0).plTipo_de_Venta = fila("TipoCompra").ToString().Trim()
sr(0).CustomObject8ExternalSystemId = fila("ApellidoVendedor").ToString.Trim()
'sr(0).CustomObject8ExternalSystemId = IIf(TipoPersona = "J", fila("DocumentoE").ToString().Trim(), fila("Documento").ToString.Trim())
'sr(0).CustomObject7ExternalSystemId = fila("")
Dim lofsr As Opportunity.ListOfOpportunityData
lofsr = New Opportunity.ListOfOpportunityData
lofsr.Opportunity = sr
sr_input.ListOfOpportunity = lofsr
sr_output = oOpportunity.OpportunityUpdate(sr_input)
oLog.Update_Log(IdLog, "Si", NumSerie, "")
Catch ex As SoapException
Me.txtError.Text = ex.Detail.InnerText.ToString()
oLog.Update_Log(IdLog, "No", NumSerie, ex.Detail.InnerText.ToString())
End Try
End Sub
************************************************************************

Sitraka JProbe Profiler with weblogic 5.1

Has anyone used Sitraka's JProbe Profiler 2.8.1 with weblogic 5.1 server, service
pack 8 and JDK1.2.2 (reference implementation) succesfully? I keep getting security
exceptions and can't get past them. Things worked fine with JDK1.1.8. Any setup pointers
will be appreciated. Please send replies to [email protected] Thanks.

The key to running WL successfully over JProbe is to use the EXACT same commandline to run
jplauncher as you would java...
So, if your startWeblogic line looks like this:
java weblogic.Server blablabla
Then your startJProbe line should look like this:
jplauncher -jp_input=jprobe_properties.jpl blablabla
Just make sure the blablabla is the same!
Gene
"Furrokh Irani" <[email protected]> wrote in message news:3a8a8bae$[email protected]..
>
Has anyone used Sitraka's JProbe Profiler 2.8.1 with weblogic 5.1 server, service
pack 8 and JDK1.2.2 (reference implementation) succesfully? I keep getting security
exceptions and can't get past them. Things worked fine with JDK1.1.8. Any setup pointers
will be appreciated. Please send replies to [email protected] Thanks.

Unable to run simple empty jsp page with weblogic 10.3.6.0.

Dears,
I have a simple war with simple empty welcome jsp page, when i deploy my project on AdminServer domain, jsp displays correctly, but if i deploy it on other domain i got this exception :
java.lang.ClassCastException: org.apache.jasper.runtime.JspWriterImpl cannot be cast to weblogic.servlet.jsp.ByteWriter
     at jsp_servlet.__index._jspService(__index.java:63)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:327)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
I'm using weblogic 10.3.6, any help will be appreciated.
regards.

dunnsoftinc wrote:
During the initial pass, I decided to leave this password null in both places, which is documented within the peopletools 8.53.00 installation guide. Maybe, it's time to further test. Thank you Nicolas.To be honest I've never tried to leave it blank in previous releases, thought that was mandatory (it was not prompted in psadmin menu as it is with PT8.53).
I don't have a PTools 8.53 instance in hands right now, but after a quick test over here on PT8.51, I have the same issue as yours.
Let me also remind you that there are two separate scenarios that may be received via the sign-on page:
1.) "The application server is down" status message without the "bea.jolt.ServiceException: TPESVCERR - server error while handling request" error.
2.) "The application server is down" status message including the "bea.jolt.ServiceException: TPESVCERR - server error while handling request" error.As I said earlier, you should get more clue in the webserver logfiles.
Nicolas.

Anyone able to run SOAP over SSL with Weblogic 5.1 and without purchasing third party tools??? If so, how???

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

How to protect an application running on IIS with OAM 11gR2

Hello Gurus,
I have a question regarding protecting an application running on IIS with OAM 11gR2. We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page. These is all solaris. I am protecting other applications like pplsoft moduels with this OHS instance and OAM server. There is another application that I need to protect which is itself running on IIS windows machine. I need guidance as to -
1.) Do I need to install a windows version of webgate to protect this IIS based application?
2.) Or I can still protect and proxy requests from this application to current OHS instance? How can I do this?
3.) Or Do I need to proxy requests directly from IIS to OAM weblogic server?
Please advise to the earliest as this is an urgent issue.
Thanks !!

From your description it is not clear how exactly architecture looks like
We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page.
is this OHS centralized login farm ? (Case 1)
OR is this OHS server (with webgate) acting as virtual web server hosting multiple web sites so that request to any site passes through this OHS/webgate (Case 2)
1.) Do I need to install a windows version of webgate to protect this IIS based application?
If case 1 then you need to install 10g webgate on top of IIS server to protect this application
If case 2 then you can just proxy request from OHS to IIS server. As every request passes through OHS user will be authenticated before request hits IIS
Look at Product documentation for virtual web sites : http://docs.oracle.com/cd/E27559_01/admin.1112/e27239/shared.htm#autoId12
It has steps to protect virtual web sites.
Also you need to make sure no one hits IIIS web sites directly.
Hope this helps

Error in Jdeveloper while running a project on weblogic server.

Hi ,
I am receiving below error while running a project in Weblogic. I am using Jeveloper 11.1.1.2.0
*** Using port 7101 ***
"C:\Documents and Settings\nlatif\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
The JRE was not found in directory D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32. (JAVA_HOME)
Please edit your environment and set the JAVA_HOME
variable to point to the root directory of your Java installation.
Press any key to continue . . .
where as I can run the same project in other machine on Jdeveloper with out this error.
Thanks & regards,
Noman

Noman,
have you checked that the folder D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32 contains the jre?
Timo

OCDM - Sample Report Installation issue - Runs too longer with No progress

Hello,
As a part of OCDM environment setup for Practice we were successful installing following :
* Supported Enterprise Linux
* Oracle DB 11g R2 (OLAP & MINING option)
* OWB was already installed as a part of Oracle DB 11gR2 - just unlocked the OWB accounts.
* Installed OBIEE 11g R2 installation - Installation successful and able to open url's. (analytics and BI Publisher etc.) - Issue with login account.
* Installation of Communication Data Model (First Installation type from OCDM Installer)
When we try to install Sample Reports at same stage the screen remain open and runs too longer with No progress.
The Installation process for OCDM Sample Reports is given in the attached doc with screenshot and the log file is also included in the attached document.
Please let us know the following two issue:
1) How to login to Analytics after OBIEE 11gR2 installed on Linux - ( in our case we use user as Administrator and tried password same as username, even checked with the user weblogic and other but no success. Please provide us the information which give details(document) about the Administartion of OBIEE 11gR2 on Linux).
2) The issue with installation of OCDM Sampple Reports though successful installation of OCDM Data Model.(First Installation Type from OCDM Installer)
Thanks & Best Regards,
Amol Thite
I think, I cant Attach the file here and character limit is 30K for the post here so putting below the few lines of Log File content:
I can email the screen shots docs and complete log file on request if needed.
It stuck in Configuration Assistance screen -
After more than 1 hour the same screen – No progress – I tried 3 times but same issue. Log file also not growing and seems its waiting for some dependent thing that need to happen before it proceed.
=====start few lines of Log File=======================================
The file oraparam.ini could not be found at /u01/app/oracle/product/11.1.0/db_1/oui/bin/oraparam.ini
Using paramFile: /u01/app/oracle/product/11.1.0/db_1/oui/oraparam.ini
Checking swap space: must be greater than 500 MB. Actual 1027 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 689.
The number of files bootstrapped for the oui is 77.
Using the umask value '022' available from oraparam.ini
=====end few lines of Log File==================================
INFO: Copying Aggr XML for: Oracle Communications Data Model
INFO: The Top level Aggreage File = /u01/app/oracle/product/11.1.0/db_1/inventory/ContentsXML/ConfigXML/oracle.ocdm.11_2_3_0_0.xml
INFO: deleted all the required instance files
INFO: OUI_CAPlugIn is not found in XML
INFO: cf session will be created for OH: /u01/app/oracle/product/11.1.0/db_1/ TLAggr: oracle.ocdm instancePath: inventory/ContentsXML/ConfigXML/
INFO: cf session for OH: /u01/app/oracle/product/11.1.0/db_1/ TL Aggr: [oracle.ocdm] instancePath: inventory/ContentsXML/ConfigXML/
INFO: aggr ref length : 2
INFO: cf session hashcode: 22855989
INFO: cf session saved with key: OraDb11g_home1 oracle.ocdm
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.ocdm
INFO: This variable sl_ASMSelectableDiskGroups is not added to the global context map
INFO: This variable s_scratchPath is not added to the global context map
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = oracle.ocdm.OCDMCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/ocdm/ocdm_install.sh ${s_dbSysPasswd}
OCDMCfgPlugIn: Starting OCDM configuration...
OCDMCfgPlugIn: OCDM configuration initialized, waiting for script response...
OCDMCfgPlugIn: Receiving SYSTEM password...
OCDMCfgPlugIn: Passing SYSTEM credentials to configuration script...
OCDMCfgPlugIn: SYSTEM credentials passed to configuration script.
OCDMCfgPlugIn: SYSTEM password received.
OCDMCfgPlugIn: Initializing config parameteres...
OCDMCfgPlugIn: Creating log folder...
OCDMCfgPlugIn: ocdm log folder exist
OCDMCfgPlugIn: Exporting config env...
OCDMCfgPlugIn: Performing OWB check...
OCDMCfgPlugIn: Installing OWB...
OCDMCfgPlugIn: WARNING: OWB OWNER already exists.
OCDMCfgPlugIn: Archive: /u01/app/oracle/product/11.1.0/db_1/ocdm/pdm/relational/sample_schema/ocdm_sample.dmp.zip
OCDMCfgPlugIn: inflating: /u01/app/oracle/product/11.1.0/db_1/ocdm/install_tmp/ocdm_sample.dmp
OCDMCfgPlugIn: 2011_02_28_11_24_30 10 % complete
OCDMCfgPlugIn: Importing OCDM sample schema
==================end of log File ========================================

Hi Please check my answers
1) How to login to Analytics after OBIEE 11gR2 installed on Linux - ( in our case we use user as Administrator and tried password same as username, even checked with the user weblogic and other but no success. Please provide us the information which give details(document) about the Administartion of OBIEE 11gR2 on Linux).
The current OCDM version does not support BIEE 11g, so you need to install BIEE 10g. In next release(will be available soon), OCDM will support BIEE 11g.
2) The issue with installation of OCDM Sampple Reports though successful installation of OCDM Data Model.(First Installation Type from OCDM Installer)
The importing will take a long time, you can login database with ocdm_sample_sys/ocdm_sample_sys, and use "select count(*) from tabs;" to monitor the import process.

HOW TO create a temp table or a record group at run time

i have a a tabular form and i dont want to allow the user entering duplicate
records while he is in insert mode and the inserted records are new and not exsisting in the database.
so i want to know how to create a temp table or a record group at run time to hold the inserted valuse and compare if they are exsiting in previous rows or no.
please help!

As was stated above, there are better ways to do it. But if you still wish to create a temporary block to hold the inserted records, then you can do this:
Create a non-database block with items that have the same data types as the database table. When the user creates a new record, insert the record in the non-database block. Then, before the commit, compare the records in the non-database block with those in the database block, one at a time, item by item. If the record is not a duplicate, copy the record to the database block. Commit the records, and delete the records in the non-database block.

Weblogic run Error on Solaris~~~ Please Help

I have a Bizzare error and dont know how to solve it.
I have set-up one Sun Netra T-1 with a product called Cisco ACS
(Advanced Cisco Secure). This comes bundled with weblogic to interface
it with Oracle database.
Setup as follows:
Sun Netra T-1, Solaris 8 (possiably 01/00 release but dont know how to
check), Oracle 8i client 8.1.6 along with Cisco ACS 2.3.6 (which
includes weblogic).
All works well
However, I have setup another Sun Netra T-1 (however this time its an
AC200) with Solaris 8 (02/02 release), Oracle 8i client 8.1.6 with
Cisco ACS 2.3.6.
There is a script included with ACS that allows you to execute SQL
statements from the CLI. However, on this second sun, weblogic just
hangs and waits.
The oracle client seems to work ok (I can run SQLPLUS to a Oracle
server) ie: sqlplus user/password@server-name works ok
I dont know where to star looking as boths systems are near identical.
ANY sound suggestions would be welcome.
Thanks in advance

Maybe this should help you!!!
-Create a login page that has user and password input text fields and
a submit and cancel button.
-Put the login.html file in public_html/docs/mydocs
-Put the LoginServlet.java in /servlets/
-Either fail to a page, or with a message from the servlet.
11:16 JDBC:
-Get the JDBC Oracle drivers from
/big5/Data/bootcamps/weblogic/classes12.zip
-Put this in C:\weblogic\lib\
-Add this to your system classpath in the Control Panel (append
;C:\weblogic\lib\classes12.zip)
-Edit C:\weblog\startWeblogic.cmd file append to:
WEBLOGIC_CLASSPATH=...;./lib/classpath12.zip
-edit your weblogic.properties file to have the following entry:
weblogic.jdbc.connectionPool.raghuPool=\
url=jdbc:oracle:thin:@192.168.1.1:1521:ORCL,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=scott;password=tiger
-STOP the server with the attached WebLogic Console. (Do not kill -9
the server... BAD BAD BAD!)
-Start the server from commandline (i.e. cd to c:\weblogic then run
startWeblogic.cmd)
-Attach your Weblogic console to your server
-Click the "DATABASE" category; expand "JDBC Connection Pools"; view
the new pool "raghuPool" (You will only see this if all the above was
correct and sucessful)
-To test this pool, go to C:\weblogic\examples\jdbc\oracle and modify
the "simpleselect.java" file
-Change the entries to have:
Driver myDriver = (Driver)
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
          Connection conn = myDriver.connect("jdbc:oracle:thin:@209.157.221.36:1521:ORCL",
props);
-Change the select statement to have:
Driver myDriver = (Driver)
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
Connection conn =
myDriver.connect("jdbc:oracle:thin:@209.157.221.36:1521:ORCL", props);
-Compile this file with: javac simpleselect.java
-cd to c:\weblogic (unless you removed the package line at the top of
simpleselct.java)
-Run this file with: java examples.jdbc.oracle.simpleselect
ENTERPRISE JAVA BEANS (EJB):
-EJBObject deals with ENTITY BEANS. Extends java.rmi.Remote.
Steps of hands-on tutorial:
http://developer.java.sun.com/developer/onlineTraining/Beans/EJBTutorial/step1.html
1) Create interface Demo that extends EJBObject. (Remote)
2) Create interface DemoHome that extends EJBHome. (Home)
3) Create a class called DemoBean that implements SessionBean. (Bean)
4) Compile java files and create a Deployment Descriptor.
          java weblogic.ejb.utils.DDCreator -dir ejb/demo
          ejb/demo/DeploymentDescriptor.txt
5) Setup the WebLogic server (tons o' stuff there)
6) Write the DemoClient class. (or any web-based client)
[email protected] (Micos Attile) wrote in message news:<[email protected]>...
I have a Bizzare error and dont know how to solve it.
I have set-up one Sun Netra T-1 with a product called Cisco ACS
(Advanced Cisco Secure). This comes bundled with weblogic to interface
it with Oracle database.
Setup as follows:
Sun Netra T-1, Solaris 8 (possiably 01/00 release but dont know how to
check), Oracle 8i client 8.1.6 along with Cisco ACS 2.3.6 (which
includes weblogic).
All works well
However, I have setup another Sun Netra T-1 (however this time its an
AC200) with Solaris 8 (02/02 release), Oracle 8i client 8.1.6 with
Cisco ACS 2.3.6.
There is a script included with ACS that allows you to execute SQL
statements from the CLI. However, on this second sun, weblogic just
hangs and waits.
The oracle client seems to work ok (I can run SQLPLUS to a Oracle
server) ie: sqlplus user/password@server-name works ok
I dont know where to star looking as boths systems are near identical.
ANY sound suggestions would be welcome.
Thanks in advance

How to run Java Application in Weblogic 8.1

Hi,
I'm new to Weblogic 8.1. I just deployed a EJB with WebLogic 8.1 Server and I
don't know how to run my Java Application against the EJB I deployed earlier.
I tried to run "java Client_1" in a console window. It gives me the following
message:
C:\temp\WebLogic\new>java Client_1
javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.
WLInitialContextFactory. Root exception is java.lang.ClassNotFoundException:
we
blogic.jndi.WLInitialContextFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:198)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:217)
at com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12.jav
a:42)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
49)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at Client_1.getInitialContext(Client_1.java:55)
at Client_1.main(Client_1.java:14)
C:\temp\WebLogic\new>

hi,
i solve this one after check bea documnetaion.
with regards
jp

Running JRA recording with Weblogic running as a service

Similar Messages

Maybe you are looking for