Running Leopard 10.5 after install
Hi,
I have 10.5 running just great after upgrading from Tiger (10.4.10). Before I upgraded to 10.5, I installed all updates of my software, operating system and firmware.
It runs good for me.
Be patient on the install process, it starts slow, but then takes off. Give 'Spotlight' some time to 'catch up.'
I can run:
Firefox 2.0.0.8, Safari 3.x, Netscape 9,
FileZilla 3.x
iWork '08
Adobe CS3 Web Premium
NeoOffice 2.2.2
Eclipse PDT
Adium
Cyberduck
iTunes
JEdit
XAMPP (Apache and Friends w/ MySQL and PHP5)
...all without any issues.
I went through this thread and the suggestions did not work for me, so I continued to try to ferret out the problem. Here is how I resolved this issue for anyone else in the same situation.
I upgraded to the new Leopard 10.5 OS. Post-upgrade when I clicked on the iPhoto icon ran into the error:
"Your photo library was not found. Do you want to find your iPhoto Library folder?
iPhoto can't continue without a photo library. Make sure the disk containing your iPhoto Library folder is connected."
and when I clicked on the Pictures folder under Places I got the error:
"The volume for "Pictures" cannot be found."
Turns out that during the Archive process, for some reason my Pictures folder was moved here:
MYUserID > Music Backup > Pictures >
So, I dropped the Pictures icon from the Places menu as outlined by Neil. Then I drug the misplaced Pictures folder under Places.
Then I opened iPhoto again and pointed it to Pictures > iPhoto Library.
Everything is back to normal! I'm sure others have been, or will find themselves in this situation. Check your Music Backup folder.
Similar Messages
-
After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?
Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao. -
ActiveX Objects Don't Run Code When Clicked after installing SP3 for 2007
I have an application that I built using Excel 2013 for a client who uses Excel 2007. Up until mid-December of last year, the application ran fine on the client's machines. Today we found that their version does not work - specifically,
clicking an ActiveX command button does not result in code running. Of course, we double-checked to make sure macros were enabled etc. We tested other files and got the same result. We tried running them off of thumb drives, to no avail. We
then learned from their IT guy that a MS security patch, 2984942, was installed on 12/12. Has anyone experienced any issues running VBA code in either 2007 or 2013 after installing that patch? What am I missing?
Thanks in Advance.
BuglessI have an application that I built using Excel 2013 for a client who uses Excel 2007. Up until mid-December of last year, the application ran fine on the client's machines. Today we found that their version does not work - specifically,
clicking an ActiveX command button does not result in code running. Of course, we double-checked to make sure macros were enabled etc. We tested other files and got the same result. We tried running them off of thumb drives, to no avail. We
then learned from their IT guy that a MS security patch, 2984942, was installed on 12/12. Has anyone experienced any issues running VBA code in either 2007 or 2013 after installing that patch? What am I missing?
Thanks in Advance.
Bugless
Yes, recent update in December broke ActiveX objects in Office. Solution is simple. Close all instances of Excel and other Office products. Do a wild card search for "exd" files (not exe !). Delete all the exd files. -
IPhone 4 runs without SIM card after installing iOS 7/7.1.1
After installing iOS 7 and all the latest update by using iTunes on my iPhone 4 I now have the problem that when starting the phone without a phone card I get the information that the SIM card is blocked and that you have to slide to unlock, the same information you usually receive when such a card is inside. Once unlocked the code screen appears asking for the PIN. The iPhone runs after having entered the PIN and you can open and work with all the apps which don't need an access to the internet like Calendar, Notes, Settings etc.. What has gone wrong? Can anybody help me please.
The SIM is only actually required during activation. And if you want a connection to a cellular carrier, of course. Once activated, the SIM can be removed and the device can be used as if it were an iPod Touch. This has always been this way.
I'm not entirely clear on what you think is wrong. -
Expansion Slot Fan running at high speed after installing NVIDIA Quadro 4000
I've noticed that after installing the new NVIDIA Quadro 4000 for Mac on my Mac Pro with Mac OS X 10.6.7 with the newly released NVIDIA drivers (03/22/2011) the Expansion Slot Fan is running at a VERY HIGH speed (between 1,200rpm and 2,100rpm), if I go back the the NVIDIA GT120 everything will be normal with the Fan speed (around 800rpm), does enybody have experienced the same issue ?, thanks
Sorry, that I can’t really offer much help...
Did you install the latest “standalone” driver update...?
Should be currently: GPU “256.01.00f03v7”... CUDA “4.0.14".
The driver has to be present before the card is installed...
Check your latest Mac Pro EFI Firmware update... should be version 1.4.
Run a general maintenance utility like, OnyX, Cocktail, TechTool Pro, Disk Warrior etc.
Restart your system... -
Upgrade to Snow Leopard before or after install new Office 2011 for Business?
I'm about to upgrade from Leopard to snow leopard. I also am going to upgrade to Microsoft Office 2011 for Business and then download the Tiger OS.
Should I install Office 2011 first (currently use 2004 Office) BEFORE I install Snow Leopard, or after?As long as you have the 10.6 DVD, you are all set. It probably contains 10.6.3, and you will then have to use Software Update to get to 10.6.8. You can do that with Word updated or not.
Upgrading to 10.7 will add a Lion Recovery partition to your Hard drive. When you are ready to do that, you may want to run Disk Utility Verify first.
All these cats make my head spin, so I just use the numbers.
If you are concerned about losing something, shouldn't you have a backup? Add word to your backup and don't worry about losing anything. -
If I run any website contains more than one video like this website for example :
http://www.neatoxv-21.org ,where it has two videos talking about the cleaning vacuum neato xv-21, and both videos
are running at the same time, then suddenly the explorer will crash, But in other broswers like google chrome it works fine.
To double check, I un-installed the software and then I restarted my computer, I installed the software again but the same issue.
I am using windows 7, so to be sure I missed nothing I updates the windows from Microsoft website and also
I am sure that I have the latest internet explorer update.
Now, the funny thing, I did the same process with Google chrome and it works fine!!!
I am totally confused, wht could be the reason??
Please advice..Update - I've now tested this with different internet connections, different computers and different operating systems. I've also just received a response from my internet service provider who said:
"I've tested in Firefox, and it looks as if the buttons are crashing the browsers' flash plugin. This being the case, it is not going to be anything related to your computer, the internet connection, or the web server.
In all likelihood, it will be an issue with how the flash tour is coded, which I presume is created automatically by the Tourweaver package you mention. You will need to pursue their support for advice on this problem as it is something with the flash file)s( which isn't working correctly."
So, hopefully Easypano support will be able to fix the problem. Obviously no connection at all with Adobe After Effects -
Can't run Adobe Flash player after install
I installed Adobe Flash player as administrator in Windows
XP. Now when I'm logged in as a non-administrator user, I cannot
run the Flash player. I just get a message suggesting I download it
when I go to a website that wants to use it. If I go to the same
website logged in as the administrator, it runs fine. Has anyone
encountered this problem?
Thanks.Try another browser. Here's why I say that.
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
Workstation cann't run .asp on IIS after installed ZEN agent
Hello,
I have Windows XP sp2 on workstation. I run .asp application on IIS. When i
installed Zenwork Desktop Agent (6.5). I cann't run .asp file. I reinstall IIS on
workstation. It's not work.
thank you
mooChanthep,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Can´t run HTMLDB in Browser after Install
Hi HTMLDB folks,
1. I installed HTMLDB on Win2000 from the Companion CD (1.5x).
2. The install process was running well and the HTTP server was started.
3. During the url http://localhost:7777/pls/htmldb i got the error message in the Browser (e.g. 503)
Whats happend?
Many greetingsHi scott,
the error log contains:
mod_plsql: /pls/htmldb/htmldb HTTP-503 ORA-28000
[Wed Jun 08 23:03:24 2005] [error] [client 127.0.0.1] [ecid: 1118264604:127.0.0.1:2388:2720:1,0] File does not exist: d:/oracle/oas_htmldb/apache/apache/htdocs/favicon.ico
[Wed Jun 08 23:03:42 2005] [error] [client 127.0.0.1] [ecid: 1118264622:127.0.0.1:2388:1896:1,0] mod_plsql: /pls/htmldb/htmldb HTTP-503 ORA-28000
the access log contains:
HTMLDB_PUBLIC_USER [08/Jun/2005:23:08:19 +0200] "GET /pls/htmldb/htmldb_admin HTTP/1.1" 503 409
127.0.0.1 - - [08/Jun/2005:23:08:19 +0200] "GET /favicon.ico HTTP/1.1" 404 298
greetings Sven -
Run root.sh failed after install grid
i installed grid,and run root.sh to configure the cluster,it took more than 12 hours,finally get the fail report
anybody can help?
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /opt/oracle/app/11.2.0/grid
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-05-18 23:42:50: Parsing the host name
2011-05-18 23:42:50: Checking for super user privileges
2011-05-18 23:42:50: User has super user privileges
Using configuration parameter file: /opt/oracle/app/11.2.0/grid/crs/install/crsc
onfig_params
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-6.el5.centos.1
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1-pub'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1-pub'
CRS-2676: Start of 'ora.mdnsd' on 'rac1-pub' succeeded
CRS-2676: Start of 'ora.gipcd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1-pub'
CRS-2676: Start of 'ora.gpnpd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1-pub'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1-pub'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1-pub'
CRS-2676: Start of 'ora.diskmon' on 'rac1-pub' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1-pub'
CRS-2676: Start of 'ora.ctssd' on 'rac1-pub' succeeded
ASM created and started successfully.
DiskGroup MyDG created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1-pub'
CRS-2676: Start of 'ora.crsd' on 'rac1-pub' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 83a7a20dc30f4f62bf5fc4e4a7a18567.
Successful addition of voting disk a8df71f68dbf4f22bf09f68aaa04de47.
Successful addition of voting disk 60cec6ca14524fdabf777568d967b5d4.
Successfully replaced voting disk group with +MyDG.
CRS-4256: Updating the profile
Failed to update the profile with the new discovery string
CRS-4000: Command Replace failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl replace votedisk +MyDG
Voting file add failed
Unable to communicate with the Cluster Synchronization Services daemon.
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.ctssd -init
Stop of resource "ora.ctssd -init" failed
Failed to stop OCTSSD
Initial cluster configuration failed. See /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log for details
=======================
and infor from /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log
2011-05-18 23:43:17: Registering ohasd
2011-05-18 23:43:17: init file = /opt/oracle/app/11.2.0/grid/crs/init/init.ohasd
2011-05-18 23:43:17: Copying file /opt/oracle/app/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2011-05-18 23:43:17: Setting init.ohasd permission in /etc/init.d directory
2011-05-18 23:43:17: init file = /opt/oracle/app/11.2.0/grid/crs/init/ohasd
2011-05-18 23:43:17: Copying file /opt/oracle/app/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2011-05-18 23:43:17: Setting ohasd permission in /etc/init.d directory
2011-05-18 23:43:17: Removing "/etc/rc.d/rc3.d/S96ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc3.d/S96ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc5.d/S96ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc5.d/S96ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc0.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc0.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc1.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc1.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc2.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc2.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc4.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc4.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc6.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc6.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: The file ohasd has been successfully linked to the RC directories
2011-05-18 23:43:17: Starting ohasd
2011-05-18 23:43:17: itab entries=
2011-05-18 23:43:22: Created backup /etc/inittab.no_crs
2011-05-18 23:43:22: Appending to /etc/inittab.tmp:
2011-05-18 23:43:22: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2011-05-18 23:43:22: Done updating /etc/inittab.tmp
2011-05-18 23:43:22: Saved /etc/inittab.crs
2011-05-18 23:43:22: Installed new /etc/inittab
2011-05-18 23:43:27: ohasd is starting
2011-05-18 23:43:27: Checking ohasd
2011-05-18 23:43:27: ohasd started successfully
2011-05-18 23:43:27: Creating CRS resources and dependencies
2011-05-18 23:43:27: Configuring HASD
2011-05-18 23:43:27: Registering type ora.daemon.type
2011-05-18 23:43:28: Registering type ora.mdns.type
2011-05-18 23:43:28: Registering type ora.gpnp.type
2011-05-18 23:43:29: Registering type ora.gipc.type
2011-05-18 23:43:29: Registering type ora.cssd.type
2011-05-18 23:43:30: Registering type ora.cssdmonitor.type
2011-05-18 23:43:30: Registering type ora.crs.type
2011-05-18 23:43:31: Registering type ora.evm.type
2011-05-18 23:43:31: Registering type ora.ctss.type
2011-05-18 23:43:31: Registering type ora.asm.type
2011-05-18 23:43:32: Registering type ora.drivers.acfs.type
2011-05-18 23:43:32: Registering type ora.diskmon.type
2011-05-18 23:43:35: ADVM/ACFS is not supported on centos-release-5-6.el5.centos.1
2011-05-18 23:43:35: ADVM/ACFS is not configured
2011-05-18 23:43:35: Successfully created CRS resources for cluster daemon and ASM
2011-05-18 23:43:35: Checking if initial configuration has been performed
2011-05-18 23:43:35: Starting CSS in exclusive mode
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.gipcd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.mdnsd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2676: Start of 'ora.gipcd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.gpnpd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.cssdmonitor' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.cssd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.diskmon' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.diskmon' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2676: Start of 'ora.cssd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: Querying for existing CSS voting disks
2011-05-18 23:44:13: Performing initial configuration for cluster
2011-05-18 23:44:14: Start of resource "ora.ctssd -init" Succeeded
2011-05-18 23:44:15: Configuring ASM via ASMCA
2011-05-18 23:44:15: Executing as grid: /opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM
2011-05-18 23:44:15: Running as user grid: /opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM
2011-05-18 23:44:15: Invoking "/opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM" as user "grid"
2011-05-18 23:47:27: Creating or upgrading OCR keys
2011-05-18 23:47:46: OCR keys are successfully populated
2011-05-18 23:47:46: Invalidating repository location for Oracle 9i deployments
2011-05-18 23:47:46: Executing clscfg
2011-05-18 23:47:53: Oracle Cluster Registry initialization completed
2011-05-18 23:47:59: Start of resource "ora.crsd -init" Succeeded
2011-05-18 23:47:59: Creating voting files
2011-05-18 23:47:59: Creating voting files in ASM diskgroup MyDG
2011-05-18 23:47:59: Executing crsctl replace votedisk +MyDG
2011-05-19 11:04:19: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl replace votedisk +MyDG
2011-05-19 11:20:24: Voting file add failed
2011-05-19 11:54:33: Exiting exclusive mode
2011-05-19 12:11:11: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2011-05-19 12:13:15: Stop of resource "ora.crsd -init" failed
2011-05-19 12:15:12: Failed to stop CRSD
2011-05-19 12:20:52: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
2011-05-19 12:20:55: Stop of resource "ora.asm -init" failed
2011-05-19 12:20:55: Failed to stop ASM
2011-05-19 12:23:59: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.ctssd -init
2011-05-19 12:24:05: Stop of resource "ora.ctssd -init" failed
2011-05-19 12:24:05: Failed to stop OCTSSD
2011-05-19 12:36:49: Initial cluster configuration failed. See /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log for detailsHi,
sounds like a security/firewall problem.
Because if during the configuration something is not "acting" it's mostly because packages are not delivered/recieved and "hang" instead of delivering error messages.
To make sure deactivate any firewall, and if this is linux deactivate SE Linux.
Next time please specify version and OS you encounter the error. This would make it easier to help you...
Regards
Sebastian -
Running Microsoft Script Editor after installing Office 2010
As per this link:
http://office.microsoft.com/en-us/excel-help/use-office-excel-2010-with-earlier-versions-of-excel-HA010342994.aspx
Microsoft Script Editor is installed along with Office 2010, even though it cannot be accessed from the UI. However, I cannot find it. I've looked in the installation folder, and in Program Files\Common Files for MSE7.EXE, and could not find it.
Previously, when I encountered a Javascript error, I would get a window prompting me to choose a debugger. Now I get a window saying no debuggers are found.
I would use IE8's built-in developer tools, but that doesn't help when debugging an HTA or under WSH.
I am using Office 2010 Professional Plus on Windows XP SP3.Microsoft Script Editor (MSE) seems has been removed from Office 2007 and Office 2010.
That means MSE will not install when you have installed office 2010.
Microsoft Script Editor (MSE) has been removed from Office 2010 from what I can tell; however, it is still installed in Office 2007. There isn't a default botton configurationm to bring it up like in Office 2003. If you want to access it make sure it is installed
with the installation of Office 2007 and make a shortcut going to "%programfiles%\Common Files\Microsoft Shared\OFFICE12\MSE7.EXE". If anyone finds where it is in office 2010 please let me know or has a definitive "no it is not a feature."
Thanks. -
"Dispatcher running, server not found" After installing temporary license
hi all,
we have Xi server at stack 03. As the licence expired, we requested for temporay license from SAP Marketplace and updated the same using Visual admin tool. The new expiry date was reflected in the visual admin tool. But once we restrted the WAS, we are unable to log into the visual admin.
"requested object was not found".
when used the url " http://localhost:50000" , it says
" dispatcher runing, server not found"
If anyone has faced simiplar problems, please let us know with some solution.
Regards,
Siva Maranani.Your server is not running.
Check two things:
1)run jcmon pf=/usr/sap/..../<instance_profile_here
select 20 and then list process to see what is running.
You should see dispatcher, server and SDM running.
In your case the server will show 0 pid.
2) go to the /usr/sap...../j2ee/cluster/server/log/console_logs (I think this is the path....and then look at the latest error logs....
This should give you an idea why the server is not running...
Hope this helps,
John Ryan -
My mac is running very very slow after installing latest update.
Hardware Information:
MacBook (13-inch, Mid 2010)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 15:42:55
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (250,06 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 249,2 GB (87,89 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.roxio.TDIXController (1.7) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents:
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents:
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items:
Dropbox
Octoshape
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
DivXBrowserPlugin: Version: 2.2 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
Safari Extensions:
Flipora - Accept Friend Request: Version: 1.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.172
iTube Studio: Version: 4.3.0.0
GoPhoto.it V9.0: Version: 1.222
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
OctoshapeWeb: Version: 1.0 - SDK 10.8 Support
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
8% WindowServer
7% syncdefaultsd
3% com.apple.WebKit.Networking
3% Safari
1% hidd
Top Processes by Memory:
66 MB Safari
53 MB WindowServer
49 MB mds_stores
45 MB com.apple.WebKit.WebContent
41 MB Microsoft Word
Virtual Memory Information:
32 MB Free RAM
564 MB Active RAM
539 MB Inactive RAM
321 MB Wired RAM
971 MB Page-ins
9 MB Page-outsYou need to install more RAM.
OS X Mavericks really needs a real world "working" RAM minimum of 4 GBs.
If you can afford to install more RAM than this, more RAM is always better.
Your year and Mac model can take up to 16 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
You need to update all of your third party software if there are OS X Mavericks updates that can be applied.
You may need to,ACTUALLY, go to the third party developers' websites if there are no updates through the Mac App Store.
Update all of your Web browser Internet plugins and extensions, also.
Good Luck! -
I'm so frustrated!! None of the solutions work, I've uninstalled itunes, won't let me uninstall bonjour because "i dont have permission" and my laptop will only run in safe mode.
I'm thinking about restoring my laptop to factory setting even if it means losing everything!!The Apple launch issues article suggests pulling 3rd-party plug-ins if the problem doesn't happen in Safe Mode.
Here's the article that will walk you through the process -> iTunes: Troubleshooting issues with third-party iTunes plug-ins
Maybe you are looking for
-
Connecting to an older Airport Extreme
I have my Cable Modem connected to my old UFO Airport Extreme in one room. Can I bridge the new Airport Extreme 802.11n to the existing UFO internet conncetion so i can connect not only my Macbook Pro via Airport but also my old iMac through its ethe
-
No HDMI output after driver updates
I have for almost a year succesfully been using my micro HDMI port on my Lenovo Yoga 2 Pro for watching movies via my projector. Today, Driver Booster suggested I update 10 drivers that were outdated. So I did. It included some Intel(R) Dynamic Platf
-
Ipod set in japanese!! How do i change it to english??
Please help?? Got an ipod nano today for my birthday and somehow it's set to japanese?? Anyone know how to change it back to english??
-
No DHL Here - Apple Ultracompact USB Power Adapter Exchange Program
There is no DHL shipping center where I live but the message I got from the Apple Ultracompact USB Power Adapter Exchange Program is to ship via DHL; what should I do?
-
Can portal take users and passwords from NT session? i can even use only NT user if it is possible. How can i do that? Thanks in advance