Running Logic Pro 9 from my previous HD on a new Mac

My 2011 MacBook Pro 4 core i7 has died on me, due to a graphics card fail. As we know, it's no use changing the Logic board as the cost is prohibitive.
So ... I'm thinking of getting a Mac Mini 2.6 GHz 8GB memory. HOWEVER, I have been using Logic 9 on the MacBook and still have some mixes to perform with all my 32 bit plug-ins that I understand will become useless when I upgrade to Logic X.
Would it be possible to boot my old HD on the Mac Mini and operate frome there to do my mixes, bounces etc ...using logic 9 and my old plugins ?
I hope I make myself clear ...

Hi
voogaroo wrote:
Sites this mean I have to buy EVERYTHING again ? I.e. Waves bundle, Izotope Ozone, RX, NI guitar amps etc ... ??
It generally means that you need to download and install all the updated versions of the plugins that you own
CCT

Similar Messages

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

Is logic pro 9 from the app store compatible with my Mac pro?

I have a Mac pro 5.1. Logic pro 9 is available at the app store. Usually they are for IPads or IPhones. Is Logic Pro 9 compatible with my Mac Pro?
Sherp

It's compatible. Note that there's an App Store (for iPhones, iPads and iPods touch) and a Mac App Store (for Macs, available since Mac OS X 10.6.6). Just open the Mac App Store and purchase Logic Pro 9

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

BDAqua wrote:
....but some other new Macs will boot frome a clone of 10.6.8...
Only with a whole lot of effort and instability. As the new Minis have
hardware (HD4000, USB 3.0, etc.) that is totally unsupported in old OSes.
The only option would be to see if it would work by installing in a virtual machine
running 10.6.8. I'm sure there will be some performance hit but whether it would
be enough to be unusable is the question.

I am considering buying a new Macbook Pro 13" non-retina either the 2.5 GHz or the 2.9 GHz version to run Logic Pro X. My question is whether there is a noticeable difference in how well Logic Pro X works with the 2.9 GHz model vs the 2.5 GHz one.

Is there a noticeable performance improvement with running Logic Pro X on a 2.9 GHz model vs the 2.5 GHz one and yes I would have 8GB of RAM installed on the 2.5 GHz one if I were to buy it. Thanks!

My buying advice - the 'entry-level' new 15" MacBook Pro. Take a look at the specs. It's a wonderful machine - and you can upgrade RAM and HD to fit your needs without voiding the warranty. I don't know of any apps that I currently run that can't take advantage of the quad-core, and almost everything is 64-bit now.
I'd used the money you saved from not buying an out-dated 17" and put it into software. If you're transitioning from Windows that can add up quickly (which isn't to say you can't run your Windows apps using Boot Camp or a VM like Parallels.
Just my opinion - but if I could buy anything I wanted right now, I'd go with one of the upgraded 15" non-Retina MacBook Pros.
Clinton

Can you run Logic Pro 8 and Logic Pro X on the same machine?

Hello all!
Congratulations to us on the release of the new Logic Pro!
I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!). I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
I am planning my Logic Pro and Mac OS migrations! Thanks!!

Try here:
https://discussions.apple.com/community/professional_applications/logic_pro
This forum is FCP X.
Al

Setting up an external boot drive to only use when running Logic Pro.

Since Logic Pro must be installed on the boot drive and it takes a lot of space I am considering an external boot drive. I would only use this drive when running Logic Pro and at other times it would not be connected. It is possible to set up a Firewire 800 drive in this manner and choose which drive to boot from whenever it is connected? I’m not interested in running Windows on this computer, but I would like the option to connect a second Firewire drive to occasionally backup the Logic boot drive.
Am I better off doing a clean install of the OS on this external drive?

If you hold down [option] at start up it will show all possible Boot volumes and allow you to select the one you want.
Yes, I'd do a clean OSX install and then put Logic Pro on it.

I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler. I get the message "nothing to display"

I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler. I get the message "nothing to display" or "no region or audio file selected" After much research on the web, I believe this is a permanent bug. Does anyone have a good work-around for this type of work. We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler. Thanks in advance for your ideas! Cheers.

Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track. I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project. Thanks again.

Would a 13" Macbook Pro (2.4GHz) be able to efficiently run Logic Pro?

I'm thinking of buying a Macbook Pro, but I'm really tight on money. Would the lowest model of Macbook Pro still be able to efficiently run Logic Pro?

It will run just fine.

Can I run logic pro x on iMac 2.8Ghz core 2 duo, 4GB RAM?

I currently run Logic Pro 9 (9.1.8) on my iMac (early 2008 model as above) but really like the look of pro x features, will it run on my iMac?
Thanks
Tim

Thanks for that info but my iMac (according to Crucial memory finder) is limited to 4GB
My iMac is 2008 model, 2.8GHz core 2 duo. Do you know if this will support 8GB ram?
Thanks

How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed

How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed? I noticed it occurring on projects where I used Miroslav Philharmonik. I keep getting prompted when opening the projects. I uninstalled Miroslav thinking it would stop, but it didn't.

Assuming you are talking about the boxed set of Logic Studio (Logic Pro 9) on DVDs the only solutions are to either borrow or purchase an external CD/DVD drive and use that with your new MBP.
Amazon sells a very reasonably priced 'Amazon Basics' external CD/DVD drive suitable for the process...
http://www.amazon.com/AmazonBasics-Portable-External-Optical-Drive/dp/B003M0NT1M /ref=sr_1_1?ie=UTF8&qid=1416924310&sr=8-1&keywords=CD+DVD+external+drive+amazon+ basics
Do NOT try and copy Logic across from your Mac to your MBP using something like Time Machine or Migration Assistant... 99% of the time, doing so results in all kind of weird issues later on.
Just install Logic pro 9 plus all it's content from scratch using the DVDs provided with Logic Studio Boxed set.....

I run logic pro 9.1.5 in 64 bit mode on lion osx and my waves plug ins won't show up. Any suggestions?

recenlty i purchased the Kramer mpx master Tape plug in from waves and i try to make it work in logic but no luck.. I switch it as well in 32bit mode some plug ins from wave are showed up but they are not operational. There are a few of them that i can load up... but the ones i really need are really not there..
Have the logic pro 9.1.5 on lion osx and a mac pro early 2008 model...
Any suggestion that i can every works fluently like it suppose to work?
thanks in advance

The crashed thread (7) mentions logic's preferences file. (com.apple.logic.pro). Drag it to the desktop (so you can reclaim you key commands if it works) and restart logic. Logic will create a new preferences file. Worth a try..

Running Logic Pro 9 from my previous HD on a new Mac

Similar Messages

Maybe you are looking for