Running MAP on Windows Server 2003

Hi,
Need to run MAP on a domain with AD on Windows Server 2003.
Is there an older version of MAP that I can run? Seems to be around v5 that supported WS 2003... But I cant find download link.
We also tried running MAP from a domain with AD on WS 2012 but there is no trust relationship between WS 2003 domain and WS 2012 domain. However, we can ping the devices from WS 2012 domain and the ping is successful. When we try running MAP, we get an
error saying "Wizard cant connect to AD. Specify diffferent domain...". Domain creds is not an issue..
Any help would be appreciated.
Thanks! =)

Hi Pankaj Dhoot,
Based on current situation, please let me confirm when the task schedule runs twice one time, did both runs
successfully?
Meanwhile, please refer to the following article and check if you can get some related log. It may help us
to narrow down this issue.
View a log of past scheduled tasks
http://technet.microsoft.com/en-us/library/cc783861(v=ws.10).aspx
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Running Forms and Reports 6i on Windows Server 2003

Hello,
Has anyone managed to get Forms and Reports 6i (running on 9iAS web) to run succesfully on Windows Server 2003? If so would you mind sharing what you needed to do to get it to work. I don't care about any of the other components of 9iAS other than forms and reports. Also is it possible to run on the 64bit version of this OS?
The problem I'm encountering (on the 64bit version of Windows) is that I can't get our webforms to launch any reports. The forms run just fine. I can run the report manually using rwrun60.exe and entering all the parameters by hand. BUT when I run the report from within the form a rwrun60.exe process starts and runs at full cpu. After a bit it dies but the form still continues to wait for it. The only way to get out is to close the browser and forcefully kill the form instance. If anyone has any ideas on what this could be any help is appreciated.
Thanks

Hi Jan,
I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
Hope this helps,
Frank

Can Project Std 2013 be made to run on Windows Server 2003?

Bought Project Standard 2013 and planned to install/run it on Windows Server 2003 (only one concurrent user), but the moment I try to install it, it gives the error "The procedure entry point EventWrite could not be located in the dynamic link library
ADVAPI32.dll." Then I noticed on the requirements page for Project Standard 2013 that Server 2003 is not supported (only 7/8/2008/2012 are supported). Is there a way to get it installed and running on Server 2003?

Hi Teky,
Please refer to the requirements below:
http://technet.microsoft.com/en-us/library/ee683978.aspx
At least Windows Server 2008 R2 SP1 is required for PS2013.
Note that if you just need Project 2013 standard edition (and not server), you do not need to install any Windows Server.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

64 bit Java 1.5 on Windows Server 2003 64bit?

I have search the Sun website, Google etc but I am unable to find a definitive statement as to whether Java 1.5.0 has support for 64 bit processing when run on on Windows Server 2003 64bit?
There appears to be separate 64 bit versions available for down load on the Solaris platform but not on Windows Server 2003 64bit. Is there for a reason for this?
If some one could clarify the situation it would be greatly appreciated.
Regards Mike Kimber

Actually I didn't and it?s the reason I asked the initial question. I found the table unclear. However the following footnote does suggest that 64 bit processing is supported natively on Windows Server 2003:
3. Support for AMD64/EM64T 64-bit mode Windows introduced in J2SE 5.0 Update 2.
Prior to Update 2, J2SE 5.0 supports AMD Opteron (64) Windows in this configuration.
Whilst not categorically stating it, this would suggest that as of Java 5 Update 2, java supports 64 bit processing on 64 bit Intel chips?
Regards Mike Kimber

Do I need the /3gb switch on Windows Server 2003 Enterprise Edition

I have an Oracle 10g database running on a Windows Server 2003 Enterprise Edition with 16gb of RAM. Do I need to set the /3gb and or /PAE switch in the boot.ini file for Oracle to use this memory?

This metalink doc talking pretty extensively about the setting
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Doc ID: Note:225349.1
As you might know 32bit system has limitation of 4G max addressable memory issue. In Windows that's 2G limit because Windows reserve 2G for system. With /3G switch you can let Application address 3G with 1G for OS, if your system has more than 4G you need to use /PAE to address memory beyond 4G.
Of course if you don't plan to allocate more than 2G to Oracle SGA then don't need the settings.

ORA-12516: TNS:listener could not find ... on Windows Server 2003

We are getting "ORA-12516: TNS:listener could not find available handler" while testing asp.net web application.
We have following configuration:
- A 10g database server on Windows Server 2000
- A Web Server running IIS6 on Windows Server 2003
- ODP.Net for 10g client installed on Web Server
we are testing our web app with 75 concurrent users, as far as I can tell we are closing connections in our app and open connection only while retrieving and saving records.
I saw this error very first time when we upgraded our web server to use 10g client. Before that we were using Oracle 9 client and have tested this app with 100 concurrent users without any error.
Does anyone can help or point a resource that can help to resolve this error?
Thanks.

Hi,
You'll likely want to take that up with the networking folks as the error seems to be coming from the Listener.
How many connections does each instance of your app make? If you make the same number of connections via sqlplus for example rather than ODP, do you see the same results? I know creating 60 or sqlplus sessions may not be fun, but it will help determine if this issue is truly somehow related to ODP. It doesnt seem likely it would be, and if ODP can be removed from the picture, it will be that much easier to troubleshoot.
One thing I'd suggest though, is to make sure your app is cleaning up after itself properly to as to use resources efficiently. If you have access to My Oracle Support, see the following note:
Note 730678.1 Oracle Data Provider for .Net Best Practices
Hope it helps,
Greg

Zenworks DLU Account Creation on Windows Server 2003 TS

We are a Novell shop running novell netware 6.5sp5, Metaframe
Presentation Server v3.0 r03 running on a Windows server 2003 server with
the novell client 4.91sp2, Zenworks 6.5sp2 desktop management client and
a Citrix Web Interface 4.0 server providing access to the environment
(all servers located in our NY location). We have NDS alias accounts
setup in our NY container for outer office users who need to connect to
Citrix (so that their Citrix session does not try to connect to their
home office server, rather it will connect to the NY Novell server.
The problem is when an alias account tries to login for the first time,
Zenworks DLU does not create the local account on the Windows box.
However, If the user account is a true NDS user account in the NY
container (not an alias), the DLU account is created successfully.
I have read several documents saying that this scenario should work fine
and others that say that Zenworks does not support alias accounts.
Can anyone shed some light on this problem?

Danny,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Windows Server 2003 64bit and Java 1.5.0, does it support 64bit processing?

I have search the Sun website, Google etc but I am unable to find a definitive statement as to whether Java 1.5.0 has support for 64 bit processing when run on on Windows Server 2003 64bit?
There appears to be separate 64 bit versions available for down load on the Solaris platform but not on Windows Server 2003 64bit. Is there for a reason for this?
If some one could clarify the situation it would be greatly appreciated.
Regards Mike Kimber

Thanks AMN for quick reply.
I have tried IE6 and IE7. Oracle application server10.1.2. I have developed a warehouse management s/w. I tried to open a form. I give one more info that I have two virtaul machine windows 2003 server and windows XP on Microsoft Virtual PC. Oracle application server setup is same on Virtual pC. It is working on virtual PC. I do not understand where is the problem on physical server.
Confuguration is like this.
1. Windows 2003 server with service pack 2 ---> Oracle Application server 10.1.2 + Java 1.5.0.7
2. Windows XP with service pack3 ---> Oracle 10g Database
3. Windows XP with service pack3 ---> java 1.5.0.7 as a client
4. Windows Vista ultimate ---> java 1.5.0.7 and java 1.5..0.13 It is working fine. I mean when i try to run a form from Vista , it is working.
Please help me. I will be very thanful to you. If you need any other info , i will send.
Thanks again
Haider

Windows Server 2003 and Microsoft Assessment and Planning tool (MAP)

Preparing for the end of support for Windows Server 2003 (4/2015) and the need to migrate from Windows Server 2003, I have been directed on several sites run the Microsoft Assessment
and Planning tool (MAP) to aid in identifying any software and hardware issues. Apparently this tool has been recently updated (7/2014) and cannot be installed on a Windows Server 2003 system. As it requires .NET Framework 4.5 to run. Unfortunately,
.NET Framework 4.5 cannot be installed on a Windows Server 2003 as it only supports .NET 4.0.x versions. All older version links to the MAP tool have been updated to link directly to version 9.1. Where can I get a MAP tool version that will run
on Windows Server 2003?

Hi,
Yes, i would agree with arnavsharma
After the environment scan has been completed in Windows Server 2008r2 or another supported OS, MAP looks at computers running earlier versions of Windows.
http://technet.microsoft.com/en-us/magazine/ee677580.aspx
Meanwhile, for the MAP related issue, you'd better ask in MAP forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=map
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Mapping issues with Server 2003 and windows 8.1 machine

We are running Windows Server 2003 and trying to map network drives through a GPO script on a Windows 8.1 machine. The drives don't get mapped and if they do, it takes them 10minutes or more to show up. The Folder Redirection is not working
as well. Any suggestions?

Hi,
This is because
by default, on client computers, Group
Policy processing is not synchronous, that is client computers typically do
not wait for the network for GPO settings to be fully initialized at startup and logon.
Solution:
Enable the
policy setting Always
wait for the network at computer startup and logon to set the client computers wait
for the network for GPO settings to be fully initialized during computer startup and user logon.
Steps to enable the Policy Setting
- Open Group Policy Management Console (start -> Run -> Type GPMC.MSC).
- Edit the required GPO and navigate to
Computer Configuration/Administrative Templates/System/Logon and enable the option Always
wait for the network at computer startup and logon
Checkout the below thread on similar problem and solution,
http://social.technet.microsoft.com/Forums/en-US/285e5a93-a5c8-4725-9067-af48bcde5c78/user-home-folder-problem?forum=winserverfiles
Regards,
Gopi
JiJi
Technologies

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
Many many thanks,

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

Running 10G as a non local system account on Windows Server 2003

Hi,
I have an Oracle 10G database running on Windows Server 2003, SP2. I have created the database and it all works fine while the service is running as the default local system account. However, when I change the user that the service runs as to a different account the database starts and opens, and I can log on as SYS using a bequeath connection but I am unable to log on as any other user going through the listener. The listener responds to TNSpings, and all seems to be OK. When I switch it back to the local system user again it all works fine.
Can anyone offer any advice or help?
Thanks,
Rob

That's probably because the listener is still running as the local system account. Have you tried to change the listener service to run as the same account as the Oracle service?

Error running universall installer using Oracle 11g on Windows server 2003

Hi,
I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
Checking swap space: 0 MB available, 500 MB required.
Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
Thanks,
Ant

Hi;
For swap problem, please check:
Swap space problem on Windows XP
http://www.pcnineoneone.com/howto/swpfile1.html
For remove process please check:
Oracle 11g on Windows Srv 2003
WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
Regard
Helios

[CS4 Server Win]: Plugin does not run on Windows Server 2003?

Hi,
can anybody help?
My plugin is running on Windows XP and Windows Vista.
On both operation systems the scripting methods are visible in ExtendScript Toolkit and can be called by javascript.
On Windows Server 2003 my plugin is not running, the scripting methods are not visible in ExtendScript Toolkit!
What is missing?
Thanks,
Alois Blaimer

> I am using Visual Studio 2008 with the VC++ 9.0 compiler.
> Could this be a problem?
Yes.
CS4: use VC2005 + SP1
CS3: use VC2005 without SP1
CS2: use VC2003
In my previous post I described one of the problems I found out the hard way - walking around in disassembler is a pain, even more Intel and Windows, comparing to Mac, and PowerPC. Since then I only use the official tools even if others tell it worked for them, and I keep the InDesign installations for final build and test on the earliest supported operating system.
Dirk

Running MAP on Windows Server 2003

Similar Messages

Maybe you are looking for