Running Multiple Browser Windows on Apple 30"?

Gidday,
Can anyone please tell me how to set up three browser windows (right, center, left) on my Apple 30"?
Thank you!

Boy, do I feel like a Mo-ron! (I thought there might be an app that did it automatically.)
Thank you for the help, Phil!

Similar Messages

Best way to approach... Wizards and Multiple Browser Windows?

How have others got / would others get around the following problem?
I have a 4 page custom-built wizard to collect information about people and then, on the final step, insert that information into my PERSONS table. I use the same 4 pages as an Update wizard as well (I have a hidden item which is set either to 'CREATE' or 'UPDATE' depending on whether the wizard is in CREATE "mode" or UPDATE "mode" which I can then use in conditions to tell the app which process to run.) This works nicely and by using the same 4 pages for both my update and create wizards it means I need half as many pages.
When a user enters page 1 of the wizard in UPDATE mode, pages 1, 2, 3 and 4 are populated with details of the person record they are updating. They can then change the values they wish, navigate to the end of the wizard with the "Next" button and then save the changes.
When a user enters page 1 of the wizard in CREATE mode, I clear the cache for pages 1, 2, 3 and 4. The user can then navigate through the pages using the Next button and then click "Save" to save the new person (perform the INSERT into the DB).
The problem comes when the user is half way through an update wizard and then, for some reason known only to the user, decides to open a new browser tab/window and start a Create Wizard in this new tab. Starting the Create Wizard has the effect of clearing the cache for the 4 pages which is an issue for when the user goes back to his other tab and tries to continue with the Update Wizard he was half way through (because all the items will have been NULLed). This problem occurs essentially whenever the user initiates one wizard (CREATE or UPDATE) when he is already half way through another one: One of the wizards is always going to get "messed up".
I would be interested to hear how others have dealt with this problem in the past? Somehow limit the user to having one Wizard open at a time? Or something else?
All/any comments/thoughts/suggestions much appreciated,
Thanks
Andy

Hello,
Well the easiest way around it is user education. Just put an information blurb on the right that says.
>>
Running this wizard in multiple browser windows or tabs will/could cause malformed data to be saved.
>>
Just like when you do online credit card transactions and they tell you not to click twice or you get charged twice.
The problem is that the same browser , if in different windows or different tabs, will share the same session.
You could maybe store all your information in a collection or something and not save or clear cache till the end, but that seems like overkill, just put some text in there that says don't do this!
Carl

If I have multiple browser windows open (not tabs, windows) and I close 1 of them, why do ALL browser windows close?

If I have multiple browser windows open (not tabs, windows) and I close 1 of them, why do ALL browser windows close?

How are you closing the window?
Are you using the File menu or the close X on the title bar?
Use Alt + F to open the File menu with the Close Tab entry visible (doesn't work with the mouse).

Creating multiple browser windows in Flash or Dreamweaver

I created a Flash site with several scenes. Is there a way to
command and code in Flash via Action Script and/or Javascript the
creation of multiple browser windows each holding one of the scenes
upon the release of a button corresponding to a respective scene?
Can this be done in Dreamweaver alternatively? If so how? Can it be
done at all?
Thanks so much.
Jody W

Hi Gorka:
I’m finally able to focus on your suggestions and
hopefully finally finish my site. Just to make sure I’m clear
on your advice using a scene called “paintings” as an
example, I discard my earlier code such as <PARAM name =
“FlashVars” value = “jodysite_paintings.swf =
paintings”>, and replace it with the code you suggest that
would look like this once completed (below)?
<PARAM name = “FlashVars” value =
“jodysite_paintings.swf =<?php echo $_GET[' paintings
'];?>”>
<EMBED FlashVars = "jodysite_paintings.swf=<?php echo
$_GET['paintings'];?>"></EMBED>
And in the Actions window for the button that would open a
new browser window upon release for the “paintings”
scene, the Actionscript for that button would read:
getURL("javascript:window.open('
http://www.jodywidelitz.com?scene=paintings','Paintings',
toolbar = no, menubar = no, scrollbars = yes, location = no,
fullscreen=yes, width=1024,height=768); void(0); "_blank", "GET");
if(paintings != undefined){
gotoAndStop(paintings, 1); 1 is for frame 1
This is the way I have the code now, but I developed a glitch
as soon as I changed the code. My preloader stays caught up in a
continual load that won’t finish, and won’t advance to
the next scene. It was working before I entered any FlashVars
coding. So the Flash movie embedded in Dreamweaver stays blank.
Also, I am using the original Flash MX and Dreamweaver MX from
2002-2003. By some chance, does this earlier version of Flash MX
not recognize FlashVars? I do have the DOCTYPE as <!DOCTYPE HTML
PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> to allow any
deprecated code, etc.
Thanks again,
Jody

Suddenly after running Firefox for years, I cannot open multiple browser windows using Windows XP.

I have always been able to open more than one browser windows, so I can have my email minimized while doing other tasks on one or more other browsing pages. All of a sudden, I can only open one browsing page. When I try to open a second, I get the red circle with a diagonal slash through it stopping me.
Can anyone help me?

Hi,
The path to the profile would usually be '''My Computer''' > '''?:\Documents and Settings\yourusername\Application Data\Mozilla\Firefox\Profiles\***.default''', if there are no other profiles. If there is another profile, it would be that instead of ***.default. You may have to enable hidden files and folders.
Please see [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows this.]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

Since updating to 3.6.11 I can't open multiple browser windows. Windows 7 Pro

Using Win 7 Pro I've always been able to open multiple Firefox browser windows. Since updating to Firefox 3.6.11 I can only open one window at a time. I can still have multiple windows open using Internet Explorer or Chrome.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Is it possible to have Multiple Browser Windows for a Faces App

I have just read from another thread
http://forum.java.sun.com/thread.jsp?forum=427&thread=308725
that states:
..the RI only keeps state for one URL at a time (in the words of the spec: "if the JSF implementation has saved state information for a tree identifier /foo in the user�s session, but receives a request with URI /faces/bar, the saved state information will be thrown away.").
That means that if you hit the /faces/ servlet with anything (e.g. /faces/css/mainX.css) after it has rendered your .jsp page, all the state necessary to process your form will be lost.
This must mean that I cant have more than one browser window with a faces
app at a time, I think that it is necessary to provide the funcionality.
My application is showing database tables and allows the user to edit them, but to restrict the user to one window doesnt seem feasable.
If you cant have more than 1 window then command_hyperlinks have serious drawbacks in that the user could be tempted to right click and open another window, then the application would not
work when changing from one window to another.
I have an idea but I cant see how to get it to work.
a hidden page-thread id that identifies which browser window/tab the user is on and that identifies a page-thread map that stores values such as the component tree and other things like list iterators, the problem is that if the user "clones" the window you would need to clone the map and change the hidden page id.
Does javascript know a window id that it could send?
Any bright ideas.
How do uSoft manage this?
Is http the right protocol????
As I understand faces apps should be run in a browser window with no back/forward buttons and without any command-hyperlinks to /faces/... so that the user can never break the program, is this correct?
Andy

I have just read from another thread
http://forum.java.sun.com/thread.jsp?forum=427&thread=3
8725
that states:
..the RI only keeps state for one URL at a time (in
the words of the spec: "if the JSF implementation has
saved state information for a tree identifier /foo in
the user�s session, but receives a request with URI
/faces/bar, the saved state information will be
thrown away.").
This used to be the case until EA4 because it has been fixed. Future release will also support necessary API that gives you control over what to save or what not to.
-Jayashri

Firefox will not open. Process runs, but browser window will not open.

I am unable to get the Firefox browser window to launch. The application will attempt to open, but the browser window will not appear. Task manager indicates that the process is running, it just will not launch the window. No amount of restarts or reboots will make a difference. The strange thing about this is that Firefox has never run. This is a new computer and this issue has been a problem since it was first plugged in.
Troubleshooting steps attempted thus far:
1) Attempted to open in safe mode - will not open
2) Attempted to run in administrator mode- will not open
3) Completely uninstalled application, including profile info and reinstalled
4) Uninstalled known conflicts - Skype 4 (do not have Norton)
5) Even though issues since new, I ran a virus scan just in case-nothing
6) Uninstalled Chrome which I installed after originally being unsuccesful at getting FF to install (I uninstalled it before I began all of these troubleshooting steps as I have heard of conflicts)
I am now at a loss and willing to try any other steps that you guys can suggest.
Computer is running Windows 7 pro 64 bit. Running McAffee virus software. There are three identical computers in my office, purchased at exactly the same time with the same configuration. Mine is the only one that will not run firefox. Sadness. Please help, pleeeease...

Win 7 with iTunes installed - I was also having problems with that.
"netsh winsock reset" at the command prompt resolved all issues and Firefox launched normally.
Check to see if Winsock is corrupted. May prevent FF from communicating with the web and consequently fails to launch properly - for my situation was not a firewall or antivirus block!
http://support.microsoft.com/kb/936211#LetMeFixItMyselfAlways
Click Start, and in Start Search, type cmd.
Right-click the cmd entry that appears in the search results, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
At the command prompt, type the following, and then press ENTER:
netsh winsock reset
Then, you should see the following message:
Successfully reset the Winsock Catalog. You must restart the computer in order to complete the reset.
Restart the computer.
Note If you receive an “Access Denied” error message instead of the message that is mentioned in step 3, the command prompt was not correctly elevated. In this case, close the Command Prompt window, and repeat steps 1 through 3. Make sure that you correctly implement step 2.

Can not run multiple firefox windows with version 4

After the upgrade to FF4 the problem started happening. In ver 3 I used the profile manager and was able to run 2 firefox windows at the same time with no problems in Windows 7.
Now when I try to do this with version 4, one firefox window errors out with 'firefox stopped working'
I thought it was due to an incompatible add on or something, so I did a complete program removal, rebooted, cleaned the registry and removed all folders that firefox put on my system. The problem continues.

You can only run multiple version at the same time if the next version is started with the -no-remote switch added to the command line in the desktop shortcut.
"C:\Program Files\Mozilla Firefox XX\firefox.exe" -no-remote -P
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Can I run multiple Excel Windows?

Hi,
My users would like to be able to view multiple BPC Excel spreadsheet simultaneously in Excel 2010. I have tried several different ways to do this, but it appears that BPC only allows one instance of the add-in to run, i.e. I opened another Excel window, but the add-in logon does not work. I can have multiple reports brought up, but since there is only one Excel window, I can only see one full size report at a time. We need to have more than one Excel window running.
Thanks,
Andy

Unfortunately I don't think this is possible. It used to be easier back in Office 2003 to run multiple sessions but I think even then, because of the nature of the BPC Excel plugin, it's just not very possible. The only thing that could get you close is to minimize the BPC action pane, maximize Excel, double click on a ribbon tab to auto-hide the Office 2010 ribbon, then use Excel's window arranging features to view two reports side by side.
I know that is not the best answer but unfortunately there just isn't a way to have two sessions of BPC for Excel open like that.
-Brian

When I have multiple browser windows open - but in the "minimized" mode - and I want to open up one of them for viewing, ALL of the windows automatically open as well. How do I prevent this annoying function. I cannot find it anywhere in the options.

This does not appear to be a system issue, but rather a functional aspect of the browser windows. E.g., if I have 7 browser windows open to different sites... and all are Minimized, and I decide to open one to study, THEY ALL POP OPEN automatically. I am using Firefox v3.6.8 on Windows 7. This is an annoying behavior of the browser, and I am sure it can be somehow "turned off" but cannot determine how to do that. I have looked through all options. I am not a techie, but have reasonable proficiency with software apps.

This can happen if you drag a tab slightly down in the browser window while clicking.
Firefox has a feature called tear-off tabs
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
You can also do this via the right-click context menu of a tab: Move to New Window
You can drag that tab back to the tab bar in the original window to undo that detaching.
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

E61 - multiple browser windows possible?

I haven't found a way to open a 2nd browser window using the built-in web browser on the E61.
Is anyone aware of a way to open a link in a new window, such that you can have 2 or more windows open simultaneously? The obvious technique of holding down the shift key while clicking on a link does not work.
It seems that some 3rd party browser apps do support this feature. But I'm hoping that its possible with the built-in browser and I've just overlooked something.

Not sure about E61 browser, but is possible with Opera.

Maintaining session across multiple browser windows and page refreshes

Hi there,
We're currently developing a Flex application with a couple of session-related requirements that we're not sure how to solve. Before we jump in and maybe go about things in the wrong way, I thought I'd post and see if anyone here knows of some elegant solutions!
Currently, when our Flex app starts the user is presented with a log-in screen which authenticates the user against our server. Client-server communication is done through BlazeDS.
Our first requirement is the ability to open a new browser window from Actionscript - this window will load a pdf document. The servlet that serves this pdf should deny the request if the user is not already logged in. The only way we can see to do this so far is to open the pdf url using navigateToUrl() with the '_blank' target, passing a jsessionid token as a url parameter. Is there a better way to preserve session state when opening a new window?
The second requirement is to preserve some application and session across browser refreshes. Our Flex app has several screens that the user can tab between. If the user hits F5 or the refresh button in their browser, we'd like the app to return to the same screen after the refresh. I've been looking into using BrowserManager to add a fragment such as #screen=2 to the url, but of course we only want the app to display screen 2 if the user has already authenticated with the server. Is there a way to reuse the user's existing session credentials after a page refresh?
Many thanks in advance for any advice anyone can offer on this. It could very well be that we're missing something about how BlazeDS uses / exposes session credentials that would make all of this easier to implement than we currently realise!

We use javascript to pass values between a 'data look up' window and the originating Servlet. If this is of any use, I can send you some examples.

IE 10 spawns multiple browser windows

This problem occurs the day after we release patches each month.
From time to time, when users login and get their desktop, IE spawns a bunch of
browser windows (20+) and the users have to close them out. What is the cause and how do you stop this behavior?

Hi,
According to my experience, your system probably infected by malware or virus, you can use security software scan your system firstly.
On the other hand, how about resetting IE settings? Please have a try.
Please check if IE enabled any other plugin that may cause this problem.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Using multiple arrange windows + drag apple loops from one to another

does anyone or has anyone experienced this?
when you drag a apple loop from on arangement to another (both the same tempo) the apple loop will not cycle correctly, and audio instruments have to be shifted via the delay parameter for both AI and Apple loops to line up. this is a frequent accurance for me.
logic 7.1.1

i resign this topic. guess i am the only one who uses this work flow. cheers.

Running Multiple Browser Windows on Apple 30"?

Similar Messages

Maybe you are looking for