Running new GL and traditional GL at the same time

Hello, I am new to the forum. I have a quick question about the new GL. Can you run the new GL in a specific country while having the other countries of the company still running under the traditional GL? Or can you only run the new GL or the traditional GL?
Thank you

Hi
Refer to the following OSS Note for all migration queries
1070629 - FAQs: New General Ledger Migration
Read question 23 for answer to your query.
23. You want to configure a new company code with the new general ledger. The existing company codes use the classic general ledger. Can company codes use different general ledgers (classic and new) in the same client?
The implementation of a new company code and the transition from the classic general ledger to the new general ledger are two different projects which you must schedule at different times.
You perform the migration from the classic general ledger to the new general ledger at client level and it affects all company codes in this client.
Because the new general ledger is activated at client level, the new general ledger would be active for all company codes, not only for the new company code. This would mean that the new general ledger is active in the old company codes, but there was no migration from the classic general ledger to the new general ledger. This is not possible.
Therefore, it is not possible to start with a new company code in the new general ledger while the classic general ledger is still active in other company codes in the same client.
First implement the new company code. Then set up the project for the transition from the classic general ledger to the new general ledger.
Alternatively: First set up the project for the transition from the classic general ledger to the new general ledger and migrate the data to the new general ledger, then implement the new company code.
Regards
Sach!n

Similar Messages

Can I run a podcast and an app at the same time?

Can I run a podcast and an app at the same time?

Yes for most. You can run a regular app with an audio podcast. I do not know what could run with a video podcast.

Can i run remote profiling and remote debugging at the same time

can i run remote profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.

i think i am wrong

Running Service pack and Authorization migration at the same time

Hi BI Experts,
We are in a situation where planned to run new Enhance pack 3 (from EHP1) in BI 7 system and also in same system migration of Bw 3.5 Authorization concept to BI 7 analysis Authorization. Both the activities are planned at the same time in same system.
Do you guys see any risk running two activities at the same time in same BI 7 system?
Would you please highlight your thought or opinion on this?
My System is on BI 7.0 with EHP1, Authorization still using 3.5 concepts
Br
Deepak

I got the way , no need to reply to this query.
Br
Deepak

Run Javascript Routine and Validations/Proccesses At The Same Time

I have a Submit Button. When a user clicks it, I want the following to happen...
1) I want a Javascrip Function to run
2) I want the Validations And After Submit Proccesses To Run
I can do each seperately, but can't figure out how to do both at the same time. I can run the Javascript Function by assigning a Optional URL to the submit button (javascript:blah()) , but the Validations and Proccesses are by passed. I can have the normal submit process, but this doesn't do the Javascript part.

Hi,
You can chain javascript calls:
javascript:blah();doSubmit('buttonname');As long as blah() doesn't return false, then the doSubmit() function will be called and the page submitted as normal.
Andy

Dual Environment - Running 8.5 and 9.0 at the same time?

We are currently running 8.5 on UCM, Unity, UCCX, Presence, and Attendant Console. I would like to upgrade to 9.0.
Can I deploy 9.0 on different Virtual Machines, get it all configured and tested, and then do a seamless cutover?
Or do I have to upgrade from 8.5 to 9.0 with no way back?

I think the best path for you depends on the requirement. If you are already running virtualized 8.5 and don't really have any hardware compatibility issues to consider, then it would probably be more straightforward to upgrade the existing applications to 9.0. There is the option to revert back to a previous version after an upgrade; however, there are a number of things to think about there especially if you run the new version for a while before running into an issue. Not knowing particulars about your environment, I think it might be a good idea to possibly run what I call an "alpha" or test environment. You could stand up a parallel set of VM's running new versions in a lab environment and run a test plan to validate any number of things. In conjunction with a bug scrub and reading up on the new version, you could then validate whether you are ready to make that move in your production environment.
Hailey
Please rate helpful posts!

Run iMovie 06 and iLife 08 at the same time?

I hate to complain, but they should have called it imovie 1908, cause they stepped so far back. I don't get it. I LOVED the transitions and effects of 06. I bragged to all my windows colleagues how much better Apple does things... and then 08...
Anyway, can I run iLife 08 for the other functions, like iPhoto (which was a huge improvement) but uninstall iMovie 08 and install iMovie 06 instead? Be the best of both worlds!!!

iMovie 6 will work on a system with iLife 08 installed. If iLife 08 is installed on a system with iMovie 6, it will not erase the existing iMovie application. You can download iMovie 6 for free if you have iLife 08.
(24170)

10.3 and 8.1 at the same time

I'm trying to run 10.3 and 8.1 at the same time and have had no luck so far.
I have:
installed 10.3 in a new directory, C:\bea103
I'm running 8.1 in the default C:\bea
changed the point base ports in 8.1
changed the http/https ports in 8.1 to 8001/8002
any ideas on what else I should do?
I can start on or the other. When 10.3 is running 8.1 outputs the following to the console (Class paths have been chopped for length and the start command edited for legibility):
JAVA Memory arguments: -Xms96m -Xmx256m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Starting WLS with line:
C:\bea\JROCKI~1\bin\java
     -jrockit
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms96m
     -Xmx256m
     -Xverify:none
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -Dplatform.home=C:\bea\WEBLOG~1
     -Dwls.home=C:\bea\WEBLOG~1\server
     -Dwli.home=C:\bea\WEBLOG~1\integration
     -Dlog4j.configuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml
     -Dweblogic.management.discover=true
     -Dweblogic.ProductionModeEnabled=
     -Dejbruntime.database=pointbase44
     -Dweblogic.security.SSL.ignoreHostnameVerify=false
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.Name=portalServer
     -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Stopping the Weblogic Workshop debugger...
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
Debugger Stopped.
Stopping Pointbase server...
Pointbase server stopped.
Here is the console output when 8.1 is running and I try and start 10.3 (edited as above):
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=512m -XX:MaxPermSize=160m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\bea103\JDK160~1\bin\java
     -client
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms512m
     -Xmx1024m
     -XX:CompileThreshold=8000
     -XX:PermSize=256m
     -XX:MaxPermSize=512m
     -XX:MaxPermSize=160m
     -XX:MaxPermSize=192m
     -Xverify:none
     -da:org.apache.xmlbeans...
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -ea:com.bea.wli...
     -ea:com.bea.broker...
     -ea:com.bea.sbconsole...
     -Dplatform.home=C:\bea103\WLSERV~1.3
     -Dwls.home=C:\bea103\WLSERV~1.3\server
     -Dweblogic.home=C:\bea103\WLSERV~1.3\server
     -Xmx1024m
     -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0
     -Daldsp.home=C:\bea103\odsi_10.3
     -Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
     -Dweblogic.wsee.bind.suppressDeployErrorMessage=true
     -Dweblogic.wsee.skip.async.response=true
     -Dwcb.properties.url="file:///c|/bea103/user_projects/domains/WCB_Developer_Domain/app
     -parms/"
     -Dlog4j.configuration=file:C:\bea103\USER_P~1\domains\WCB_DE~1\apacheLog4jCfg.xml
     -Dweblogic.management.discover=true
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.ext.dirs=C:\bea103\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wli1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_cie670\profiles\default\sysext_manifest_classpath;C:\bea103\patch_alsb1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_aldsp1030\profiles\default\sysext_manifest_classpath;C:\bea103\wlportal_10.3\p13n\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\portal\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\lib\system;C:\bea103\wlportal_10.3\analytics\lib\system;C:\bea103\wlportal_10.3\apps\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\deprecated\lib\system;C:\bea103\wlportal_10.3\content
     -mgmt\lib\system
     -Dweblogic.alternateTypesDirectory=C:\bea103\wlportal_10.3\portal\lib\security
     -Dweblogic.Name=AdminServer
     -Djava.security.policy=C:\bea103\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Stopping PointBase server...
PointBase server stopped.
\Windows was unexpected at this time.
So I'm stuck, can any one point me to some documentation or anything at all to get me moving forward on this?
Thanks
John

Hi
Did you change this 8453 to someother value for one of the domains. This looks like a Pointbase DB Debug Port. First change main pointbase db port and then change this debug port value also in setDomainEnv.cmd file.
HTH
Ravi Jegga

L2 OOB and L3 OOB at the same time

Can you run L2 OOB and L3 OOB at the same time?
I have a core 6509 and it is trunked to access layer switches â 4506 and 2960sâ.
The problem is that I am installing a 3845 routerâ off the 6509â to act as a hub for crypto tunnels. The spokes will be 2821 routers with 2960 switch on its own subnet that requires routing not L2.
Could someone provide a good example of configuration? Most confused with the CAS.
In the above need do I have E0 and E1 in different VLANS with different IP's.
Using a 10.x.x.x /24 private address network.

Yes you can run layer 2 and layer 3 in other words client adjacency is 0 hops from cas in respect to the 6509 and multi hops in respect to the 2960 switches at the remotes.
Unfortunately its not as simple as providing you a working config getting this set up is usually a 1 week process for most cisco partners.

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

My iphone was stolen. If i buy a new one and to register with the same Apple ID, my photos will be recovered in the new device?

My iphone was stolen. If i buy a new one and to register with the same Apple ID, my photos will be recovered in the new device?

If you have a backup of the old phone that backup contains camera roll photos. Restore from that backup to get your camera roll photos back

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Running new GL and traditional GL at the same time

Similar Messages

Maybe you are looking for