..running on 2nd monitor (???)

Dears All,
i have a little problem on MacPro8core 10.4.9 and latest QT version.
I have 2 monitors connected.
When i am switching to full quick time view ( command F) the quick time video is "going" to the 2nd monitor . Just on Mac Pro, on my 2 G5s same configuration no problem.
Appreciate any help.
Best regards.
-A

Open Quicktime-->Menu-->Quicktime Player-->Preferences-->Full Screen...you can set what screen the Full Screen goes too...

Similar Messages

Can't run flash player in full screen on 2nd monitor

Hi all! I have a laptop with dual video displays. The main
display is the laptop's LCD and the 2nd display is a 19" LCD
connected via VGA cable. I want to let a Flash movie loop endlessly
on the second monitor while I continue to work on the laptop. When
I drag Flash Player 8 over to the 2nd monitor and start the movie,
I can hit maxmize and it will take up the entire 2nd montior as it
should...with the file options and boarder around as expected. I
then hit Ctrl-F to go full screen and it snaps directly to the
laptop's primary monitor. I tried it at work where my desktop has 2
displays and the same thing happens. I need to force Flash player
to run full screen on the 2nd monitor and cannot find a way to
accomplish this. Any help is appreciated because it's driving me
nuts. I can always make the external monitor my primary but then
the start button and all my icons move there too and that is not
acceptable. Thanx!

Seriously? No one has any thoughts about this? I can't
believe I would be the first to come across this issue.

Z68A GD65 G3/i2600k - is SLI on 1 monitor, run 2nd monitor on IGD possible

Typically I only use 2nd monitor for reference, chat, etc during a game.
I cannot get 2xGTX 470 to run 1 and only the 1 monitor, and the IGD HD3000 to run monitor #2.
Is that because we cannot do so, and virtu only allows for switching ?
Small hit, if any, I thought I had read that old limitation of using either/or was gone with Z68... wishfull thinking ?
ld

Probably wishful thinking. Only two choices, PEG or IGD. Virtu switching won't work when in an SLI configuration if my Z68A-GD80(G3) is any example.

MacBook Pro performance issues w/2nd monitor and FCP7

I have this MacBook Pro bought brand-new in January 2010:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
and until today had never attached a second monitor to it. Today I hooked up my Samsung 24" to do some dual screen editing in Final Cut 7.0.3. I was unable to play back my video at full speed in the second monitor, and after a few seconds of skippy playback I'd get that error message about unable to play back video at full speed and to check my RT settings. I was using a Mini DisplayPort to DVI adapter. My computer has no issues playing the video in the laptop's monitor at any resolution and any quality settings (I've never changed the RT settings or anything else in the menu ever but I tried every combination this time). I then tried using my TV as a 2nd monitor with an HDMI adapter. Same performance issues. I then tried my friend's newer 13" MBP 8,1 and it performed flawlessly with the same project & footage. I feel like my $3,000 computer should outperform a $1,200 one even if mine is a year and a half older. Any advice?
Chris

Wow, you posted this perfectly to coincide with an identical problem, albeit using Logic Pro 9.1.5 rather than FCP.
Last week, I purchased a 23" external monitor to use alongside my "flagship" 2011 15" hi-res, 2.3 i7 Macbook Pro with 8Gb of RAM.
It is connected via a mini-DVI to D-sub analog (not that that should matter?) and all appeared fine.
The first issue I had was with my MBP's fan now running CONSTANTLY, when I have the second monitor attached. Even when the machine is completely idle.
When using the machine to record audio, this is a fairly hefty problem and not something I had anticipated - indeed why would I anticipate such a thing?
What is far, far worse though is that over the last few days I have had repeated problems with performance drop-outs and errors in Logic and I have trying to fathom out why. Realising that the only major system change made, was the above monitor connection, I ran some tests.
I restarted my MBP, no other apps were running and with my new 23" monitor attached acting as main display with MBP built in display on as secondary
I loaded up a fairly demanding Logic project which was hitting 40% to 60% CPU usage when using the built in MBP display last week
I ran activity monitor and had CPU usage history open
The above project now repeatedly overloads and playback halts in a given 8 bar section - with CPU at 80% most of the time
I disconnected the external display, no shut down, I just let the machine switch to the built in 15".
Started the same project, the same 8 bar section and hey presto - CPU usage back down to 40% to 60%
The above was reflected in the CPU usage history with the graph showing CPU use down by about a half, when running this Logic project WITHOUT the external display.
There is a very useful benchmark Logic project that has been used as a test by many users to gauge Logic performance on given Apple hardware.
The project has about 100 tracks pre-configured with CPU intensive plugins, designed to tax the CPU.
The idea is that you load up the project with tracks muted, press play and then unmute the tracks steadily until Logic us unable to play contiunously because of a system performance error.
On my MBP, with the external monitor NOT attached, I can play back around 50 of the audio tracks in this benchmark project.
With the monitor attached, I can get about 22 tracks playing.... which is actually a far worse a performance drop (-50% I think!?) than with the first example!
I did also try with just the external monitor attached and not the MBP display and performance was about 10% better than with dual monitors - so still extremely poor, to say the least.
This machine is the flagship MBP and has a dedicated AMD Radeon HD6750 GPU which should take care of most if not ALL graphics processing - I mean it's capable of running some pretty demanding games!
Putting aside the issue of constant fan noise, there is no reason AT ALL, why using an external monitor should tax the i7 CPU this way - it's not as though Logic is graphically demanding... far from it.
I am on 10.6.8, Logic 9.1.5, all apps up to date via "Software Update".
I will of course, be contacting Apple...

Mac Pro 3.1 (early 2008) lags since I connected a 2nd monitor - HELP!!

Hey guys,
I just bought a 2nd monitor and i have lags every 5 seconds which
last about half a second (feels like 10 or less fps during the lag).
It happens with all kinds of applications. It gets worse with multiple
applications openend at a time. The crazy thing is that it only occurs
when i start to use both monitors at the same time. When i e.g. use
Logic 9.1 and use one monitor everything runs nice and smoothely
but as soon as i move the window slowly to the 2nd monitor i can
see the window lagging while I'm moving it. This is really annoying
because it seems not every input from the mouse/keyboard gets
into the system and its not a smooth workflow at all.
I switched the monitors connections but it didn't help.
Mac Pro (Early 2008) 2.8Ghz 8-core
Snow Leopoard ( 10.6.2 )
6GB RAM (2x2gb kingston, and the usual 2x1gb)
ATI 2600XT and 3 HDD.
1 Monitor 24" LG W2452T running at 1920 x 1200
1 Monitor 22" Samsung Syncmaster 2243BW running at 1680 x 1050
I really hope that you guys can help me out with this one.
What could be the problem? The ATI 2600XT should definately
be able to handle two screens at once with such little graphics
in logic 9 ?!
I want to run Logic 9 and an analyzer software (Spectre from AudiofileEngineering)
at the same time but its not possible with the LAG.
The problem/lags also occur when i sync the monitors.
Would a 2nd graphics card be a solution? But as I said
before its not a graphics demanding application.
Is it a hardware or software problem?
Summary:
- The whole System lags (not just one monitor) when
I start to use both monitors (having application windows on both).
I've got minor lags when using only one display and leave the
2nd one with the desktop wallpaper clean.
I tried:
-using only the 2x1 GB RAM which came with the mac pro
-using only the 2x2 GB Kingston RAM
Thank you in advance for your help guys!
Rick

Hey all,
I wasn't able to fix this yet.
I did everything I can think of. I even tried to wire
one monitor with a VGA cable but it didn't help.
I even have small lags when I am moving the Safari window
between the 2 monitors. Really little lags then but they
definitely are noticeable. I can make a video of that
if that would help someone understanding.
Hope there is someone out there who can help me with this.
Thanks already for any advice!
Cheers,
Rick
Edit: Do you think a new graphics card like the ATI 4870 would
help it? But I really don't want to spend more money just to
have 2 monitors while i have already 2 dvi connections on the
ati 2600XT.
Message was edited by: RickUnique

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Can I use a 2nd Monitor at 4K resolution (quad hd, 3840 x 2160 pixels)

HP Envy TS 17 Notebook, Product # E4S19UALaptop is running Intel HD Graphics 4600, and I have 16Gb memory installed. I use a 2nd monitor all the time via the HDMI port - works great. Both the laptop and the current 2nd monitor are running at 1920x1080 resolution (HD). I would like to attach a 4K monitor - (UHD-1) 3840x2160 resolution - 4 x "regular" HD (twice the horizontal and twice the vertical resolution). Will this laptop be able to operate the 4K monitor at 3840x2160 resolution (even at 30hz would be okay - not for games but rather for word processing, spreadsheets, software development)? Don't want to invest in the fancy new monitor if the laptop cannot drive it! Here is an exampe monitor: Samsung 28 Inch Ultra High Resolution LED Monitor (U28D590D), available on Amazon.com. Thanks!

Thanks for the information! As a suggestion, I have a copy of that manual, and it does indeed state precisely the information that I needed. Funny thing is, I looked in the TOC and the Index for anything related to external monitors and HDMI, and there wasn't anything that pointed to that page. Perhaps for future User's Manuals, the TOC and/or Index could include such references. Either way, thank you so much for the help! Also, for folks who are interested in higher resolution external displays, there is the option to use USB devices such as that from www.plugable.com to attach devices. I don't yet have their USB 3.0 4K compatible one, but I have been using their USB 2.0 HD compatible one for several years so that I can have 3 monitors (built-in, external, Plubable USB) - and it works very well. Flawless operation, though refresh rate is slow (not good for gaming). Which works for me, because it is mainly for surfing and email.

2560 x 1600 is gone from my display settings (2nd monitor)

I've been running my 15" retina macbook pro for more than a year now with 27" DELL monitor and it has alway been using 2560x1600 resolution display.
In the past year i've had no issues with mirroring my screen to big screen TV using Apple TV, however today something weird happened.
As usual i mirrored my screen using Apple TV to watch some videos and i had to change some of the display settings to get the best view on my TV.
Afterwards i switched off the mirroring feature and now my 2nd monitor (DELL 27") is displaying 1920x1080 only. I looked at all my options on my display settings (using ATL+click ) and 2560x1600 is gone missing from the list. Im frustrated and couldn't find an answer to this problem, please advice.
Couple things i tried;
- restart & shutdown
- reset NVRAM & PRAM settings
- changed mini display cable with another
- reset monitor settings
Weird find:
I tried to mirrored my macbook pro to apple TV again to see the display settings. Guess what, the option for 2560x1600 is now back on the list and working (visually) just fine. as soon as i turned off the airplay display my 2nd monitor turns back to 1920x1080.
Note: the display on my retina macbook pro is working just fine, no problem at all. this is only showing on my 27" DELL U2713HM.

Hello! Just want to ask about mirroring: when you MIRROR the Retina MBP 15" to your Dell Monitor (2560x1600) : do both the MBP and Dell Monitor look sharp and crisp?
I'm asking because I'm also considering a monitor that's at 2560x1600.
Thanks so much!

2nd monitor not using all available pixels

So am I the only one having this issue? -
I have a Mac Mini that is running Windows 7 in bootcamp. I have 2 monitors. My 2nd monitor is connected with an HDMI to DVI cable. In Windows, the whole screen of both monitors is used (edge to edge, top to bottom). But when I switch over to Yosemite, my second monitor has about a 1 inch bar of black on both sides and a 1/2 inch bar along the top and the bottom. This is literally unused space.
I've talked to Apple Support several times but they don't seem to have an answer. I get transferred to someone but each time I get cut off. (so I gave up trying to fix this over the phone or on line chat). There are no features or selections in the Syncmaster to adjust this. Why does it work perfectly fine in Windows but not when I switch over to Yosemite.
Maybe this doesn't seem like a big deal but it's so frustrating that I'm actually finding myself not wanting to use the Yosemite side.
Does anybody have a solutio

Sorry:
Display TypeLCD monitor / TFT active matrix
Diagonal Size20 in
Aspect RatioWidescreen
Native Resolution1600 x 900
Pixel Pitch0.2768 mm
Brightness300 cd/m2
Contrast Ratio1000:1 / 15000:1 (dynamic)
Color Support16.7 million colors
Response Time5 ms
Horizontal Viewing Angle170
Vertical Viewing Angle160
FeaturesHDCP, MagicBright 3, MagicTune
Dimensions (WxDxH)19.1 in x 7.9 in x 14.7 in
Weight9.7 lbs
ManufacturerSamsung model 2033SW

Connecting a 2nd monitor

I want to buy either a Dell or BenQ 2nd monitor for my mac book pro.. are these monitors compatible??

http://www.apple.com/macbookpro/features.html
On the new MBPs, they have a Mini DisplayPort, which supports VGA, HDMI and DVI outputs. You could get the Apple LED Cinema Display - it might be a little more expensive but it'll definitely work with the new MBPs.
BTW, it'd be handy if you put your system details in the text boxes above the 'post message' button when you put something in this forum...that way we'll know what you're running without you having to keep typing it in all the time.

Sanyo LCD TV as 2nd Monitor flicks to black & pops

Hey All,
2.66 Mac Pro running Mavericks 10.9. I plugged in my Sanyo DP42849 via HDMI using a(n admittedly third party) Mini DisplayPort to HDMI converter dongle. I should mention, I've never attempted to use this TV as a 2nd monitor, but I have used the same dongle and a Panasonic 1080p 42" tv with no issue (albeit not on Mavericks)
When I plug it in, if it recognizes the signal at all, it alternates between the desktop background for anywhere from 0-4 seconds, and black for 0-5 seconds. Inconsistently, sometimes there will be a signal pop coming from the TV.
Is this a TV issue? A Mavericks issue? A dongle issue? A Graphics Card issue? What's going on here?
I have tested 2 different HDMI cables (same result), but I only own one dongle.
When I go to the displays menu, refresh rate is greyed out, and changing the resolution does nothing towards stabilizing the signal on the TV.
Thanks for your help!!

Well the lcd that I provided the link for would be the production monitor to hopefully see how a television would view the finished product. I've got my eye on something like the Acer AL1916W - 19" LCD WideScreen for my widescreen #2 monitor. *just in case I confused anyone. As you suggested though, I will be researching more for the # monitor. Thanks again.

How Do I Add 2nd Monitor using AppleTV?

I use a mid - 2012 Mac Pro; run Mavericks MacOS X 10.9.5.
1. I would like to know how to connect my SONY TV as a second monitor wirelessly using AppleTV.
2. Once 2nd monitor is connected:
3. What do I do to use the cursor and keyboard on the 2nd monitor?
4. How do I reply to an answered question for more info, or to thank someone?

Hey again Angel,
It is the latter:
If your Mac supports AirPlay Mirroring, an AirPlay Mirroring status icon appears in the menu bar when an Apple TV is on the same network as your Mac.
OS X Mavericks: Wirelessly mirror your Mac screen to your HDTV
https://support.apple.com/kb/PH14375
So the AirPlay icon will only be seen on your Mac when an Apple TV is present on the same network as your Mac. You may also be interested in more information about AirPlay, which can be found here:
About AirPlay Mirroring in OS X - Apple Support
https://support.apple.com/en-us/HT201343
-Braden

In windows 2nd monitor says no input - what display drivers are used and how can I update them?

HI. I am using windows side of my macbook pro. Yesterday, for some reason, the computer quit recognizing my 2nd monitor. Nvidia is one of the drivers used but I have updated this and it is not working still. Someone said that I should contact the maker of the laptop, apple, and get graphics drivers from them. But I don't know how to do this. Help would be appreciated.
Michael

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

T43 extended desktop (2nd monitor) maxes at 1280x768

I use an HD Flat panel TV with computer monitor capability as a 2nd monitor for extending my desktop. This 2nd monitor has a very high resolution capability (the manual recommends a setting of 1920x1080 for computer connections).  The T43 display settings dialogue limits this second monitor to 1280x768 pixels, even though it allows much higher resolutions for the T43's built-in screen (I currently run at 1400x1050).
I see no Lenovo driver updates that address resolution issues for a 2nd monitor, but would really like to take advantage of a higher 2nd monitor resolution in my work.  Am I limited by my video hardware, video driver, BIOS, or what?  Is there a solution to my problem?
The product id of my T43:   2687D3U

Once you open up the zip, there's a "read me" in English....
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor

I'm using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor screen. It is simply locked to the right side of my 1st monitor. A solution would be great. Sorry if it's a noob question.
Thanks for your time.
Monty

No problem. We've all had newbie questions at one time or another.
However, I am going to have to put on my clairvoyant hat and guess you are running Photoshop 10.0.1 (CS3). :/
In CS3, do NOT attempt to move the palette well, i.e. the dark gray zone above the palettes. That you cannot move.
Instead, grab each palette individually by the light gray bar just at the top of each palette.

..running on 2nd monitor (???)

Similar Messages

Maybe you are looking for