Running on Ubuntu accents doesn't show
Hello there i have this problem, im running Jdeveloper 11.1.1.2.0 on Ubuntu, everything its ok , but when i run a project, the accents and other characters doesn't appear well instead the browser shows weird characters.
Any clue??
What type of account(s)? (POP, IMAP, Exchange)
1) Repair & Refresh OS X files
Boot into the Recovery Drive by holding down Command R when restarting.
Run Repair Drive and Repair Permissions using Disk Utility in Recovery.
Restart
Run the combo updater over your install to refresh your files.
OS X Mountain Lion Update v10.8.5 (Combo) 831.81 MB
http://support.apple.com/kb/DL1676
2) Reindex Mail
With Mail quit....
Go to your User's Library folder.
**Show Library Folder:
Select the Finder in the Dock. Under Go in the Menu bar > hold down the Option key and you’ll see the Library.
Go to Containers in the User's Library folder.
drag the com.apple.mail folder to the Desktop
Go to Mail in the User'f Library folder.
Select the V2 > MailData folder.
Delete any files in MailData with envelope in the name. (should be 3)
Go to Preferences in the User's Library folder.
If you find any com.apple.mail.plist files, delete these.
Log out under the Apple in the Menu bar
Log in
Open Mail.
Mail will re-index your files.
Let me know if this helps.
Similar Messages
-
French characters in run time parameter values doesn't show up in emails
We have a custom workflow with configurations to send email when a request is assigned to a person and also to send email on request rejections.
We are encountering following issues with respect to French characters that are available in the message body and message subject.
Issue 1:Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. Since the message body contains French characters we have used ISO-8859-1 encodings to render the message properly to the user. The message body also has some run time content from the task payload.
For e.g. À titre de responsable fonctionnel, une demande d''approbation pour un accès informatique vous est assignée.
Accès informatique demandé : <%/task:task/task:payload/ns1:ObjectDetails/ns1:name%>
In this case all static text values are rendered properly to the end user in his email. However the French characters in run time parameter values doesn't show up properly and has some weird characters.
Issue 2: Unable to change the default subject shown in the approval task emails i.e. Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. By default it shows Action Required: Approval. How can this default value be changed?
Issue 3: We have an Email Activity in Bpel process that follows a task rejection. The emailpayload is ISO-8859-1 encoded and works for the message body. However the email subject shows up with ISO-8859-1 encodings itself and doesn't convert to proper string in the end user's email. Is there any specific setting required for french characters in subject?Hi Kulwinder,
Thanks for your reply.
In fact I do, I've follewed the "Using SAP HANA Variables with SAP BusinessObjects BI4.0" guide.
Please note, when I use a fix value to parameter is working fine, for example:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$','20130530'))
But when I set prompt of the DataFoundation parameter I get and error, this is my sentence:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$',@Prompt(FECHA)))
To me is very curious that I can't enter a value in the DataPreview in Hana Studio, because is not requested, even when the input parameter have been set as mandatory
Have you idea of what could be happening? -
Running Sync BPEL process doesn't show any HTML form /XML source for input
Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas -
Am told firefox is already running , but task manager doesn't show it
am told firefox is already running , but task manager doesn't show it. I installed Firefox 3.6.10 on a new computer (win 7 home premium), deleted the profile given and copied my old profile in its place (win vista premium). I get the above message and am told to close the existing process, or restart the system. Can't close and restarting doesn't help. Please solve this for me, i so don't want to use Internet Explorer
g'day people... a dude called "moopenguin32" showed me the way... alleluia
1. Copy your Firefox shortcut (what you click on to open Firefox) to the Desktop.
2. Right-click on it and click on Properties.
3. Go to the end of the text in the "Target" field. The end will say: firefox.exe"
4. Enter a space followed by: -profilemanager
5. The end result will look something like this: "C:\Program Files\Mozilla Firefox\firefox.exe" -profilemanager
6. Click OK to save the settings.
7. Double-click on the shortcut you just changed.
8. Delete the profile listed. It shouldn't matter that you're deleting it because you're trying to restore a profile anyways. You should have the profile you're trying to restore saved elsewhere.
9. Close the profile manager.
10. Start Firefox using your regular shortcut. Firefox should open properly. Close Firefox.
11. Now to restore your profile, open the profile folder you have backed up and copy the contents of it rather than the actual folder.
12. Go to your existing Firefox profile and open it.
13. Delete the contents of the existing Firefox profile.
14. Paste the contents of the Firefox profile that you're trying to restore (the one you copied in step 11).
15. Open Firefox and everything should be there (including your extensions). -
It is in the question but to repeat.
1. When I go online I use Mozilla Firefox
2. While I am doing other work, I usually close the internet.
3. If I go back on the internet and click on Mozilla it won't come up, stating that "it is already running".
4. Despite that, when I open Task Manager, it doesn't show that it is running so I can't shut it down or open it.
5. If I log off or shut off the computer, then after I log in or reboot the computer, I can open Mozilla.
Thanks from a Mozilla fan.See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs -
Firefox process is running but the GUI doesn't show up.
System description:
ThinkPad T61, Windows 7 X64 with both Firefox 3.6 and 4.0 beta installed.
Now both version of Firefox won't show their GUI when I start them but the "firefox.exe *32" process is running.
I tried to clean up all the customize information about the firefox, uninstall both of them and reinstall the 3.6, but the GUI still won't show up.Did you create a new profile for the Firefox 4.0 beta version?
See http://kb.mozillazine.org/Profile_Manager
If you use the same profile for both versions then create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I turned on my computer but it doesn't show anything on the screen
I turn on my iMac, I hear it running, but the screen doesn't show anything and it also doesn't make the 2 beeps it usually makes when I press the power button. There is also slight ringing when it is off and still connected to a power source.
I've tried disconnecting the power cord for 30 seconds, plugging it back and waiting a few more seconds and turn it on.
Here are the things it has:
2.5GHz quad-core Intel core i5 processor
4GB of 1333MHz DDR3 SDRAM
500 GB 7200-rpm hard drive
AMD Radeon HD 6750M graphics processor with 512 MB of GDDR5 memory
Thunderbolt port
I have not updated to Mavericks or Mountain Lion OS X
The Model No. Is A1311Hello Salavaur,
Thank you for contacting Apple Support Communities.
You can use the following article to troubleshoot the video issues on your iMac:
Apple computers: Troubleshooting issues with video on internal or external displays
Regards,
Jeff D. -
I have a swing gui with (among others) a JPanel that's supposed to show a chess board. For testing purposes when designing the gui I used an ImageIcon of the board, and put it in a JLabel on the JPanel:
ImageIcon board = new ImageIcon("board.gif")
JPanel boardPanel = new JPanel();
boardPanel.add(new JLabel(board));
// add the boardPanel to the GUIThis worked nicely, the board did indeed show up.
Now however I switched to a custom JPanel, which contains a Canvas, on which the board is drawn:
ImageIcon board = new ImageIcon("board.gif")
BoardPanel boardPanel = new BoardPanel(board);
// add the boardPanel to the GUI
// BoardPanel class:
public class BoardPanel extends JPanel
public BoardPanel(ImageIcon board)
BoardGlyph boardGlyph = new BoardGlyph(board);
setLayout(new BorderLayout());
add(boardGlyph, BorderLayout.CENTER);
// BoardGlyph class:
public class BoardGlyph extends Canvas
private ImageIcon boardImage;
public BoardGlyph(ImageIcon boardImage)
this.boardImage = boardImage;
public void paint(Graphics g)
super.paint(g);
if(boardImage != null)
boardImage.paintIcon(this, g, 0, 0);
}but when I run this, the board doesn't show up. What am I missing here?
TIA
ZeroFKthanks, now it shows up. But not completely... it's only a very small part that shows - and using setSize and setMinimumSize doesn't work You should use setPreferredSize(...);
-
My weather app doesn't show the feels like temp or wind, etc. How can I fix this? I am running iOS 8.1.2.
is that really what it is? this is the native iphone weather app. the funny part is that when i use the actual weather channel app, it does provide it.
is this an api issue with the weather channel and the iphone then? i guess there's no fix?
thanks for your help by the way. -
At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?
I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will. -
I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
Any help much appreciated!In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss. -
After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.
After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.
-
Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook. Does anyone know what the dll for this service is so it can be manually added to outlook? I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook).
So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?I had the same issue and figured it out. First you have to start Outook as administrator. To do this, shift and right-click on outlook and click run as administrator. Next you need to enable Hard-disabled add-ins:
Hard-Disabled Add-Ins
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.
Then you need to activate it.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Inactive Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click COM Add-ins, and then click Go.
In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
Click OK. -
Auto-Run/Start Doesn't show up on iTunes
Hi, I'm having a difficult problem about the Auto-Run/Start thingy for my iPod touch that doesn't show up on iTunes on my MacBook Pro 13". Just because I want to remove my pictures from my iPod touch so I can transfer into the MacBook Pro as Picture folders.
So how come it didn't show up like the Auto-run/start pop-up thingy? I did it before (like last week). Why like that? How come I didn't see that one on Finder folder on my MacBook Pro?ah thanks... i already saw it on iPhotos.
i always thought the device didnt show up on Finder but only can show up on iPhoto when i sync it on my Macbook Pro from my iPod touch. -
Running Mavericks 10.9.3 with iphoto 9 loaded Elements 12 and went to import iphoto files - but the import option doesn't some "from iphoto" and the file/getphotos and videos/from iphoto doesn't show - what is the issue
I'm not sure exactly what you're saying, but you probably don't want to use "from iphoto" anyway. That's only for when you want to import your entire iphoto library (like when you decide you want to use organizer instead).
The first question is what are you trying to do? Do you just want to open photos from iphoto into the PSE editor or do you want to import them into the organizer for something?
Maybe you are looking for
-
What is the report to get a List vendors - total invoiced amounts during a certain period Thanks SK
-
My kid's have 3 iPod Touch's, 4th gen running iOS 6. We all share one Apple ID for purchases, but they each have their own Game Center ID. iOS6 Game Center DID NOT require an email address to use. Now I have bought them all iPad mini's that are runni
-
Import table to differnet schema using data pump
Hello All, I am trying to export a table from schema MIPS_MDM and import it to MIPS_QUIRINO schema in different database. I am getting the below error. expdp MIPS_MDM/MIPS_MDM@ext01mdm tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp lo
-
Getting Web Start to use JDK's javaw.exe, not JRE's
On Windows, I need a Web Started app (actually, my Glossitope desklet) to run with the JDK's javaw.exe, not the JRE's, because I use the Java Compiler API, which is more or less a no-op in the JRE. I've tried using the Java Control Panel to change th
-
I would much rather be able to reload my previous session of tabs without having to waast over an hour laboriously reloading each tab piece by piece. How do I get round this