Running Oracle Forms 10g on 30 inch monitors
Hi!
Oracle Forms application (10g) will not work good on 30 inch monitors. (Running NATIVE, suns javaengine)
Most of our customers is running on 24 inch monitors with no problems.
Has anyone had the same problem? Solution?
Regards
Tobias
As I mentioned, you need to install the 10.1.2.3 patch set. Additionally, you can find over 110 more Forms fixes in Patch ID 9593176. This patch requires that 10.1.2.3 be installed first.
One last comment, IE 9 and FF 10 are not supported for use with Forms 10.1.2.x. Also, JRE 1,6,0_30 is not certified for use with Forms 10.1.2.0. Version 10.1.2.3 would be required in this case. I am not suggesting that your configuration won't work, but rather because it was not certified by Oracle there is a possibility that it will not work correctly in some instances. Because those browsers were never certified, it would be up to you to prove that the same problem reproduces in a certified configuration if you expected Oracle Support to assist. That said, Forms/Reports 10.1.2.x is no longer entitled to Error Correction Support, so I guess it really doesn't matter what configuration you use as for the most part you are on your own.
The current Forms/Reports version is 11.1.2.0
Similar Messages
-
Getting Error when running oracle form 10g
Hi all, i have a problem when i run oracle form 10g.
in the applet show like this :
Loading http://abc:8889/forms/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 10.1.2.0
Loading http://abc:8889/forms/java/frmall_jinit.jar from JAR cache
Loading http://abc:8889/forms/java/jacob.jar from JAR cache
Loading http://abc:8889/forms/java/printtext.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.TextFieldItem.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.ButtonItem.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Can anybody help me how to solve this problem ?
Thanks,
IwanLoading http://abc:8889/forms/java/printtext.jar from JAR cache
This tells me you are using a 3rd party or locally developed Java Bean to perform some type of print function. Is this correct?
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.Does your printtext.jar Java Bean need to open an HTTP connection in order to print?
Have you been able to print in the past using this Java Bean? Where did you get the Java Bean?
RegisterWebUtil - Loading WebUtil Version 10.1.2.0Your form appears to be using WebUtil. Has it been successfully configured?
Honestly, you need to list the following minimum information when you post a question; it gives us all or most of the information we need to help you and it eliminates the need for us to ask for this information. Please always include:
* Forms Version (eg; 10.1.2.0.0 not 10g)
* Java Version
* Client OS version
* What you were doing when the error occured.
Craig... -
Running Oracle form 10g in web
Dear all,
What components do i need to run a form 10g on web?
I have developed a form already and it runs on a browser of the machine i used to develop it. I want to run it from another machine via web, what should i do?
Thanks and regards,
SteveHi!
On your develop machine open the formsweb.cfg in %developer_home%\forms\server
with the text editor of your choice.
Scroll to the end of the file and create a new config entry:
This is for use with Jinitiator without webutil:
[your_config_name]
form=your_form_name.fmx
WorkingDirectory=x:\your_fmx_path
lookAndFeel=oracle
# leave userid empty to force manual login
userid=user/password@database
baseHTMLjinitiator=basejini.htm
archive_jini=frmall_jinit.jarTo call your application from the other client machine use
*{noformat}http://developer_machine:port/forms/frmservlet?config=your_config_name{noformat}*
Regards -
Run Oracle Form 10g on other personal computer Browser
Sir, I want to ask some more question.
I have installed the Database 9i in the Server (name: SORA1) & installed Oracle Developer 10g in the Other Server (name:SDEV1).
When I built the form (e.g:emp) at Machine SDEV1. It run on the SDEV1 smoothly on Browser with the below URL.
http://SDEV1.abc.com:8889/forms/frmservlet
My Question is:
How can I run the emp form into the client side personal computer (name: PC2) on the browser?
I have already installed jinit in PC2.
Note: abc.com= local domain
Thanks
regards Tanweer
Edited by: ta**** on Jun 2, 2011 3:24 AMThanks for your reply
Note: the clients Machine on Local Area Network(LAN).
It run smoothly on Application Server Machine (SDEV1) when I click on the "Form Bulider" toolbox Run command. It give the URL on browser just like this http://SDEV1.abc.com:8889/forms/frmservlet
When I pass the URL on clients machine (PC2 & PC5)
http://SDEV1.abc.com:8889/forms/frmservlet?config=test
It gives the following error :
Network Error (tcp_error)
A communication error occurred: "Connection refused"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
When I pass the URL on clients machine (PC2 & PC5)
http://192.168.80.36:8889/forms/frmservlet?config=test
It gives the following error :
Technical Information (for support personnel)
Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202)
IP Address: 192.168.80.2
Date: 6/4/2011 12:00:05 PM [GMT]
Server: proxy.abc.com
Source: proxy
Note: 192.168.80.2 is my ISA server machine. Even I given full Internet Acces to IP 192.168.80.36.
Thanks
Edited by: ta**** on Jun 4, 2011 5:05 AM -
ORA-12560: TNS:protocol adapter error while running Oracle Form 10g over IE
Hi,
I am getting the following error message while running my form over Internet Explorer. What could be the error and the solution.
ORA-12560: TNS:protocol adapter error
I am using the same user id/password that i used to create the database.
Plz help.
thanks,
RVunless you defined the TWO_TASK in your environment, you might need to provide it during the login. The typical Forms login screen has 3 fields, username/password and TWO_TASK , which is the alias used for the database server in the tnsnames.ora file on your end. If you are using iAS forms, then a proper RAD (Resource Access Descriptor) needs to be created by the DBA or whoever manages the iAS server. This is only if SSO is utilized, if not, then you need to provide TWO_TASK as well.
Hope this proves useful
R/ Zafer -
Displaying the Oracle Forms 10g
Hi Everyone,
I need help on this one.
I am currently running Oracle Forms 10g and I want to display the Calendar object on an item in my module.
I have attached the relevant libraries i.e Calendar and added the program units as required so in my module there are two additional data blocks that is
DATE_CONTROL_BLOCK and DATE_BUTTON_BLOCK and I have my canvas and the DATE_LOV_CANVAS.
What code do I had to the KeyListVal trigger to enable me to display the Calendar at runtime?Hi,
Actually what I want to find out is how to include a
Calendar in my Form Module at runtime.That wasn't your initial post's question, and what do you mean by at runtime??
You need to have the objects you stated in your first post in the form to be able to show the calendar at runtime.
If you have the Forms Demo read the help files they have explained everything in it. If not you can download it from [url http://www.oracle.com/technology/sample_code/products/forms/index.html]here
Tony -
Run oracle forms on windows mobile
i want to run oracle forms 10g on windows mobile 5.0 does anyone have an idea how to do this?
there is any jinitiator for windows mobile 5.0 or jre.
i am wainting ur replay thx.Hi,
Good idea if it is possible. Usually there is a jre comming with the mobile 5 device. It might not be win mobile 5 but some other third party one.
Anyone to help ??
I have not seen any documentation on tihis.
Paninie. -
Can we run oracle Forms 5 Application with 10G in Client/Server?
Hi All,
Can we run oracle Forms 5 Application with 10G in Client/Server
Mode?
Regards
GauravIn theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
With 10g you will be running through a browser.
Regards
grant -
Unable to run Oracle Form Builder from Designer 10g
I am using Windows XP with Oracle Designer 9.0.4.5. From Design Editor, I select Run -> Oracle Forms, nothing happen. I am able to open Form Builder manually (C:\ORACLE\904\bin\ifbld90.exe). After I generated a module (form) from Designer, I have to open the FMB manually from Form Builder. In Designer 9i, I am able to open Form Builder from Designer. Is this a bug for Designer 10g?
Thanks,
JimThanks for the response, Suresh,
I believe this is an installation/configuration issue.
I installed Oracle Developer Suite 9.0.4, which includes Form Builder, Report Builder, and Designer. System Path contains the ORACLE_HOME (c:\oracle\904\bin). I am able to start Form Builder from DOS command (ifbld90.exe). I am also able to start Report Builder (rwbuilder.exe) and Designer (des2k61.exe) from DOS. I am able to Run Oracle Report Builder from Designer, but just not Form Builder. I also checked the Windows registry settings and they seem alright to me.
thanks,
Jim -
Issue running when Oracle Forms 10g
Hello Experts,
I have installed Oracle forms 10g (Developer Suite 10g) on my machine. But when runnig the forms, it doesn’t load the form, says ‘Applet loaded’ and stops executing.. In Console it gives the following error :
Have tried installing on a fresh copy as well but it give the same/similar issue.. Wasted lot couple of days on this now
Using IE 8 and tried on IE 7 as well.
I am runnng this through Forms builder
Can anyone help me on this...
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Administrator
User has overriden browser's proxy settings.
Proxy Configuration: Manual Configuration
Proxy: proxy.dialog.dialoggsm.com:8080
Proxy Overrides:
JAR cache enabled
Location: D:\DevSuiteHome_2\forms\java
Maximum size: unlimited
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Downloading http://aaa-073-114.softcom.bigsoftcom.com:8889/forms/java/frmall_jinit.jar to JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
---------------------------------------------------------------------------------------------------------------------------------------------------------------Using IE 8 and tried on IE 7 as well.
Oracle JInitiator: Version 1.3.1.22Oracle Jinitiator is not compatible with IE 7/8, you have to use the Sun JRE 1.6.0._16 or higher instead. Take a look at section *2.2 Oracle Forms Applications on Client Platforms* in the Oracle Application Server 10g (10.1.2) Certification Matrix.
After installing the Sun JRE 1.6.0, you will need to modify the %DEVSUITE_HOME%\forms\server\formsweb.cfg to set the correct JRE version information. Make the following changes:
# System parameter: base HTML file for use with JInitiator client
#-- Original
#baseHTMLjinitiator=basejini.htm
#-- New
baseHTMLjinitiator=basejpi.htm
#-- Original
#jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
#-- New
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads/index.html
# Parameter related to the version of the Java Plugin
# -- Original
#jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# -- New (this entry specifies update 16)
jpi_classid=clsid:CAFEEFAC-0016-0000-0016-ABCDEFFEDCBA
# OR, you can instruct OAS to use any version of Sun JRE 1.6.0
jpi_classid=clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
# -- Original
#jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# -- New
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,22
# Parameter related to the version of the Java Plugin
# -- Original
#jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# -- New (Specifies update 16)
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_16
# -- OR use any version of 1.6.0
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
How to do this in oracle forms 10g
hi all,
any idea about how to format a drive using oracle forms 10g and shutting down the remote pc and a personal pc using oracle forms 10g.
i am using windows XP2 as os.
please replay..Hi Inol and Weiden,
thanks for your help,
i have cretaed a form xyz.fmx with a button , i wrote in when-button-pressed and also attached the default webutil.pll(which is in forms path) library in attached-library section
Client_host('cmd c/ shutdown -i');
but my problem is that when i run the form i am getting error that
FRM-40039: Cannot attach library webutil.pl while opening form xyz.fmx.
Cause: The given library is attached to the form but
cannot be located in the search path for PL/SQL libraries.
Action: Make sure that the given library can be found
and that it has read permissions set.
Level: 99
Type: Error
i think i have to configure the webutill.pll but i don't how to configure
can you tell me how to configure the webutil.pll file..
please reply.. -
URGENT!!! calling crystal reports from oracle forms 10g
Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thankshi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM -
Calling a Report from Oracle Forms 10g
Hi Everyone,
I need assistance.
Am running Oracle Forms & reports 10g.
My Form module is running just fine. Inside the the Form Module I added a button with a "When Button Pressed Trigger" that has the following code
declare
repid REPORT_OBJECT;
v_rep VARCHAR2 (100);
begin
repid := FIND_REPORT_OBJECT ('REPORT49');
v_rep := RUN_REPORT_OBJECT (repid);
end;
This compiles without any errors.
At runtime when I press the Button from Forms, I get the following error;
"FRM-41211: Integration error: SSL failure running another product"
Please assist.
Regards,
PascalineHi user593321
FRM-41211: Integration error: SSL failure running another product.
Cause: There is a problem detected when launching another product.
Action: Check the RUN_PRODUCT built-in.
Level: 99
Type: Error
Below a very useful links pls try them, i recommend the 2nd one:
http://www.programmersheaven.com/mb/oracle/211184/211184/ReadMessage.aspx
http://www.developpez.net/forums/showthread.php?t=292435
Best Regards,
Abdetu.. -
Calling Crystal Reports from Oracle Forms 10G
Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM -
How to call Reports in oracle forms 10g
Dear All,
How to call Reports in oracle forms 10g.
I am using Oracle Forms 10g Reports 10g and Database 10 and and Operating system Windows XP.
Please give me the Solution.
Thanks and Regards,
FaziludeenHi Omkar,
Please check the following code.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:POLICY.POLICY_NO));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('POL_REP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||'LENOVO-428E9E41'||'8889'||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=prod_report_server&P_parameter='||:POLICY.POLICY_NO||
'¶mform=no');
END;
I am used to Start the Report sever 'Rwserver Server=prod_Report_Server Start'
OracleAS Report Services
Version :- 10.1.2.0.2
Name :- prod_report_server
Status :- Server is Shutting down
Jobs in Queue 0
Active Engines 0
I got the Following Error when I trying to run the Report
FRM-41211: Integration error:SSL failure running another product
Thanks and Regards,
Faziludeen
Maybe you are looking for
-
How do I use a Netgear CM400 cable modem with my Time Capsule router?
I switched out my TWC modem for one I bought. I called and activated a CM400 Netgear modem with time Warner cable. They said it is activated and responding. My time capsule is on a green solid light but i can't connect to the Internet! Why??
-
Aux track has no input and no choices
Pretty simple question. Why do my aux tracks say "no input."
-
MIRO-Account type/account for invoice reference does not match item-F5350
Hi gurus please help When I tried to cancel an MIRO invoice, it is giving me the error Account type/account for invoice reference does not match item". "F5350 " Please advise. thanks MSJ
-
Ship to Canada from US in iphoto '09?
How to change shipping country from US to Canada in iphoto '09. There's no option to change shipping country in advanced preferences. And in order window, US is the only drop down option. According to help menu, I should be able to ship to Canada fro
-
Java static code analysis tool on Windows
What Java static source code analysis tool are there on Microsoft Windows, and which would you recommend? I Know Coverity and Klocwork Edited by: Jennifer.helen on May 8, 2009 6:03 AM