Running oracle programs on a Mac Pro??
Hello I currently use a HP laptop for work (provided by my employer. Most of the programs on my computer run on the windows platform. For example, I currently use LIMs (laboratory information management systems), JDE, Lotus Notes (webmail) and Kronos (time entry management for direct reports). Some of the software, such as the ones I listed, were developed by oracle. My question is " Has anyone used programs such as LIMs, Kronos or JDE on a Mac. I am very interested in purchasing a Mac pro but have yet to know if anyone has used such programs on a Mac. If anyone has, I would greatly appreciate any input.
http://www.google.com/search?q=OracleMacOS
Similar Messages
-
Help, I need to run three displays on my Mac Pro 4,1.
Help, I need to run three displays on my Mac Pro 4,1.
I have a Radeon 5870 installed with OS X 10.8.3
need to run a Dell 30 inch dislay, a 19 inch Eizo and a 12 inch Cintiqu Display Tablet please.
Ant tipes or hints? Failing that, I would like to know of a comptaible video/graphic card which will only take up an additional slot, as I have the others filled with eSata and USB 3 cards.
Cheers
DavidYour 5x70s support three monitors. Are you having trouble?
Answered just last night in this thread also
https://discussions.apple.com/thread/4933924?tstart=0 -
As soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down
Linc,
You keep showing up when I search for this problem so I hope you can help.
I'm having the same issue in Premiere and Media Encoder (but not After Effects). My Mac just restarts itself as soon as video is loaded. I can start Premiere and open a project and go through relinking media, but as soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down.
I've fixed the problem temporarily two times. The first time I was troubleshooting what was wrong and wound up putting in my old video card and after that fixed the problem, I switched back to my GTX 680. I also did a driver update. After doing that I was ok for a few days so I figured it was a driver thing or maybe the card just needed to be reseated. Then when it started acting up again I figured something was going on.
So I started searching again and came across one of your posts that recommended removing CUDA. I did that and it worked perfectly for a week until about 20 minutes ago. Crashed in the middle of an edit and now each time I restart Premiere it crashes as soon as video touches my monitors.
I found this post because I specifically searched for "com.nvidia.web.NVDAResmanWeb(8.2.7)" from my Problem Report.
Any thoughts?
Thanks,
Darren
Fri Jan 16 14:43:42 2015
panic(cpu 5 caller 0xffffff7f999066a4): NVRM[0/4:0:0]: Read Error 0x00002100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff827e13b000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82776cbbe0 : 0xffffff8018c22f79
0xffffff82776cbc60 : 0xffffff7f999066a4
0xffffff82776cbd20 : 0xffffff7f999e0774
0xffffff82776cbd70 : 0xffffff7f99c1605d
0xffffff82776cbdc0 : 0xffffff7f99c4ea83
0xffffff82776cbe20 : 0xffffff7f99a05b8f
0xffffff82776cbe40 : 0xffffff7f9990ca2d
0xffffff82776cbef0 : 0xffffff80190b0a20
0xffffff82776cbf30 : 0xffffff80190af4c2
0xffffff82776cbf80 : 0xffffff80190af597
0xffffff82776cbfb0 : 0xffffff8018cd7607
Kernel Extensions in backtrace:
com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000->0xffffff7f99b5cfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9989b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f993a3000
dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f998ab000
com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f99b6c000->0xffffff7f99d36fff
dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
<Re-Titled By Host>Thanks for the reply. Sorry for the shortened log. Here's the full thing. By the way, where do you learn to read these things? Are there keywords like "error" that you just learn to look for or is it something for in depth?
Thanks,
Darren
Mon Jan 19 08:02:40 2015
panic(cpu 5 caller 0xffffff7f9cd066a4): NVRM[0/4:0:0]: Read Error 0x00504610: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff82813fc000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82927dbaa0 : 0xffffff801c022f79
0xffffff82927dbb20 : 0xffffff7f9cd066a4
0xffffff82927dbbe0 : 0xffffff7f9cde0774
0xffffff82927dbc30 : 0xffffff7f9d03e562
0xffffff82927dbc50 : 0xffffff7f9d015a35
0xffffff82927dbd10 : 0xffffff7f9d015e05
0xffffff82927dbd70 : 0xffffff7f9d016096
0xffffff82927dbdc0 : 0xffffff7f9d04ea83
0xffffff82927dbe20 : 0xffffff7f9ce05b8f
0xffffff82927dbe40 : 0xffffff7f9cd0ca2d
0xffffff82927dbef0 : 0xffffff801c4b0a20
0xffffff82927dbf30 : 0xffffff801c4af4c2
0xffffff82927dbf80 : 0xffffff801c4af597
0xffffff82927dbfb0 : 0xffffff801c0d7607
Kernel Extensions in backtrace:
com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000->0xffffff7f9cf5cfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9cc9b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9c7a3000
dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f9ccab000
com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f9cf6c000->0xffffff7f9d136fff
dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000001be00000
Kernel text base: 0xffffff801c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234985677156509
last loaded kext at 1019554175070: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9e577000, size 335872)
last unloaded kext at 421976737662: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9e428000, size 8192)
loaded kexts:
com.nvidia.web.GeForceWeb 8.2.7
com.nvidia.web.NVDAGK100HalWeb 8.2.7
com.nvidia.web.NVDAResmanWeb 8.2.7
com.blackmagic-design.desktopvideo.iokit.driver 10.3.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.3
com.ATTO.driver.ATTOExpressPCIUl4 4.4.1
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.ntfs 3.11
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.Oxford_Semi 3.4.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus: -
I am trying to do a migration transfer from an older Mac Pro, running Leopard, to a newer Mac Pro, running Lion. There is a step that asks for a "passcode" to proceed. I have no idea what that passcode is. It seems to want a numeric code. Has anyone had this experience?
This general-purpose article gives detailed step-by-step instructions for using Migration assistant, Setup Assistant, and other mehtods, and discusses the Pros and cons of each mtheod. It is very approachable and easy to understand. Wriiten by Pondini, the resident Time Machine guru.
Setting-up a new Mac from an old one, its backups, or a PC -
Advanced question for running DOS programs on a Mac.
So what is a simple process on a Windows machine seems to be a challege on my new Mac.
In summary I have several hard drives laying around that need to be checked for problems before they are used. There are lots of free DOS programs available for PCs that do just that. Many are provided directly by the hard drive manufacturers themselves (ie Segate SeaTools) and they are fantastic. Macs unfortunately can't run DOS programs (without hacks like rEFInd) and none of the manufacturers provide Mac compatible software. Looking on the internet everyone points me to Disk Utility to check drives, but compaired to something like SeaTools, Disk Utility is useless. I found Micromats TechTool Pro 6 which comes close to what I need except its expensive and has lots of features I don't need.
I want to avoid installing windows in bootcamp or a VM just to do this one simple task. Very frustrating that it seems like im the only one wanting to do this with a Mac.Did some more research and figured out these are my options:
-Find a mac alternative (few out there, most very bacic, or very expensive)
-use rEFInd (which is in beta, and modifies OSX)
-bootcamp (which doesnt allow BIOS access to select a dvd DOS program, so doesnt help. Also, mac doesnt use legacy usb and keyboard drivers so you cant use keyboard/mouse in most DOS programs)
-Vmware
So to me my best option was to use Vmware. Installed on a USB hard drive to save space and configured VMware bios to boot from selected .iso of a disk and it worked. Successfully ran SeaTools and because VMware emulates legacy mouse/keyboard it worked.
One problem though. SeaTools for DOS doesnt work from USB sata adapter, and considering its a macbook air im out of luck. -
I get the following message when trying to run the download assistant:
The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.BncCrafts
From where are you downloading the Adobe Application Manager? Has it been this one
Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager
What version of Premiere Elements Mac are you running on your Mac Pro OS Lion 10.7.5? Or, is it that program that you are trying to install with the Adobe Application Manager?
More later.
ATR -
Running 3 displays on a Mac Pro with a single ATI Radeon HD 5770?
Hi all,
I am trying to run 2 19" widescreen monitors with VGA connections and a Sony 32" tv simulantaneously on my Mac Pro. Was wondering if anyone could offer some knowledge on this highly discussed topic...As far as I am aware the main problems that seem to arise with other users on similar forums when trying to do this is the mis-informed use of passive adapters as opposed to active adapters. Is this correct, or is there more to consider here? Do I need to buy a second HD 5770?
After some research here is my proposed setup:
Monitor 1: ACTIVE mini displayport to VGA adapter
Monitor 2: ACTIVE mini displayport to VGA adapter
Monitor 3: DVI port to HDMI cable
Should this solve my problems?
The active adapter that I am looking to buy is this:
http://www.accellcables.com/products/DisplayPort/DP/mdp_vga.htm
Hope someone out there can be of some assistance,
Thanks,
Stefan.That setup should work. I believe all mini-displayport (mDP) to vga adaptors are considered as "active". I know that apple documents that their adaptor is considered active (see note in this doc). So you satisfy the requirement of having two active adaptors to support three monitors on a 5x70. And I think the Accell one you linked to is also fine.
Note, that while your setup will work to drive the video to the two vga's and HDTV's, you still need to address how to pass audio to the HDTV. DVI does not support audio. If you aren't interested in passing audio then you can ignore the reast of this post.
In my setup with a 5870 I have a vga monitor going through one of the apple mDP-to-vga adaptors (that counts as one active adaptor). I also have a 2010 27" apple LCD monitor which of course connects directly to the second mDP (no active adapter so I still need a another). And like you I want may HDTV connected to the DVI. So to satisfy the requirement of a second active adaptor, and to also avoid having to pass analog audio cables to the TV (which you have the option to do with your setup), I chose to use the following device with satisfies the requirement of an "active" adaptor.
DVI & S/PDIF Digital Coax/Optical Toslink Audio to HDMI Converter
This allows me to pass the DVI and TOSLINK (digital) audio to that converter and string a single HDMI cable to my HDTV. Works perfectly. The only thing about that converter is it's limited to 1080i, not 1080p. I don't care, couldn't tell the difference anyway on a 32" HDTV.
Finally, to go along with all this I use SwitchResX which allows me to set up multiple monitor configurations. So I can enable the TV when I want to use it from my computer and disable it when I don't. And I can switch the configurations with a menu or hot-keys. And with a little applescripting which you can add to SwithResX configurations I can even switch the audio from my computer to the TOSLINK, i.e., switch between my computer speakers and those attached to the TV. -
Running 10.6.8 on Mac Pro Dual-Core Intel Xeon 2.66GHz processors. Can I upgrade to Lion 10.7
I've just upgraded from 10.5 to 10.6.8 on a Mac Pro Dual-Core Intell Xeon, 2.66GHz. Is it possilbe to upgrade to Lion 10.7 with my Mac Pro Dual Core or have I just hit my ceiling on 10.6.8 update ?
Mac Pros are not PowerMacs. In 2006, Apple changed all its cheesegrater enclosure Macs to have the Xeon chip installed, and changed the name to Mac Pro at that that time from PowerMac G5. That said, all Mac Pros can upgrade to a minimum of 10.7.5. Only the earliest ones can't upgrade to 10.8 and above. 10.7 and later do not have Rosetta, the ability to run PowerPC (pre-2006) applications natively. For other pitfalls, read this tip.
-
Premiere Pro CC running slow on my new Mac Pro
I just upgraded my system to the new Mac Pro(Darth Vader Helmet) and its running slower then my 5 year old tower!? Ill take 15-20 seconds to save a project(small project). The playback is still a bit jerky. Overall it just seems to be lagging a bit.
Here are my comp specs:
OS 10.9.2
3GHZ 8-Core Intel eon 5
64 GB 1867 MHz DDR2
Does anyone have any idea why Premiere isnt blazing!?
Thanks
RJim Curtis wrote:
Thanks, Jason, that's what I was wondering about. Generally, people post to forums when they have problems.
Yep. That's usually what happens. My review will be centered around my usual "benchmark" of editing 2 AVCHD inputs, one PiP'd into the other, synced with an external audio source, and then exported to an h.264 MP4. CC on my current Mac Pro (modified dual 3.46Ghz Xeon, 48G, nVidia GTX570) takes that task about 1/2t, if t = length of video. Which is pretty damned good. I'm hoping the dual GPUs will help scale that export task down a bit more. I don't expect it to hit 1/4t, but.. hey, maybe I'll be surprised?
I make about 60% of my living from Pr, and the rest from Ae and other apps (mostly Adobe).
Given the lack of CUDA, at the moment, I don't expect the new Mac Pro to be a stellar performer with Ae specifically. I assume that Adobe is working on OpenCL'ing Ae as much as they possibly can. But from what I understand, it ain't there yet.
(I'd need a TB monitor and PCI extender, too).
I can understand the need for the PCI extender, but why the TB monitor? I'd in no way even remotely consider one of those, just given how ridiculously priced they are. There's no need for one. Does your display have a DP input? You're all set. No? It has HDMI instead? Still all set. It's dual-linked DVI that becomes problematic. -
Run oracle 10g application in MAC OS
Hi We have an ERP application which was developed in Oracle10g, we need to run this application in MAC OS.now its running in Windows and Linux. if anyone has done this kindly share your experience. What are the steps i have to do to enable this application in mac os. If any documents related to this kindly send me.
Thanks in advance.Good morning, I saw your post on how you were able to install and run Oracle on your Mac and I am in the process of attempting to install the database and I am having no luck. Someone gave me a link to a post on how they were able to comment out a line in the mak file to get it to compile. Needless to say, I commented out the same line and I still can't compile the database binaries. Here is a portion of the log file.
"INFO: rm -f /Users/oracle/product/10.2.0/db_1/rdbms/lib/hsodbc
INFO: gcc -m32 -o /Users/oracle/product/10.2.0/db_1/rdbms/lib/hsodbc -L/Users/oracle/product/10.2.0/db_1/rdbms/lib32/ -L/Users/oracle/product/10.2.0/db_1/lib32/ /Users/oracle/product/10.2.0/db_1/hs/lib32/hsodbc.o /Users/oracle/product/10.2.0/db_1/rdbms/lib32/defopt.o /Users/oracle/product/10.2.0/db_1/rdbms/lib32/homts.o -L/Users/oracle/product/10.2.0/db_1/lib32/ -lnavhoa -lhsnav -lhsbase -lagent10 -lclntsh -lpls10 -lplp10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10
INFO: -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /Users/oracle/product/10.2.0/db_1/lib32/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /Users/oracle/product/10.2.0/db_1/lib32/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 `cat /Users/oracle/product/10.2.0/db_1/lib32/sysliblist` -L/Users/oracle/product/10.2.0/db_1/lib -lm `cat /Users/oracle/product/10.2.0/db_1/lib32/sysliblist` -L/Users/oracle/product/10.2.0/db_1/lib -lm -lvsn10
INFO: i686-apple-darwin10-gcc-4.2.1: /Users/oracle/product/10.2.0/db_1/hs/lib32/hsodbc.o: No such file or directory
INFO: make[1]: *** [Users/oracle/product/10.2.0/db_1/rdbms/lib/hsodbc] Error 1
INFO: make: *** [ihsodbc32] Error 2
INFO: End output from spawned process.
INFO: ----------------------------------"
I hope you can help.
Thank you,
Javier -
How to run Apple Hardware Test on Mac Pro with ML preinstalled?
I have Mac Pro 5.1 (2012) which came with Mountain Lion preinstalled. It didn't have install DVDs. How do I run AHD? Restarting with D, or command+D, or option+D didn't work. It would just restart the OS. And Mac Pro didn't support Internet AHD eather.
Thank you for your reply, Carolyn.
I read this article. None of those applied to my case:
my Mac Pro came before 2013 and it doesn't have Apple Diagnostics built into it,
it doesn't have Apple Hardware Test built into it,
and my Mac Pro came with Mountain Lion preinstalled and it did not have system software disc or USB flash drive.
Restarting while holding down the D key simply doesn't work it just reboot back to the desktop. -
I can't get 5.1 Surround Sound running Windows 7, Mid-2010 Mac Pro
Hello,
So I'm running bootcamp on my Mid-2010 Mac Pro and I can't get Dolby Surround Sound to run from the Realtek HD Audio Manager. Is there a way to produce true Dolby 5.1? I understand this may be more bootcamp related than to the actual hardware itself but I figured this is the best place to start troubleshooting this.
ThanksI can try-dunno how much help I'll be, though
go here for Realtek drivers for surround sound
http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=37&Level=5&Co nn=4&ProdID=144
try this: go to Windows Sound, then playback devices, then click on speakers icon (should have realtek as default). Click on that, and click configure
if realtek has a sound manager, try clicking on that, and a config dialog might appear
sorry can't be much more help than that
JB -
Problem running portable hard drive on Mac pro please help
Hello People, Look I bought a WD Elements (portable storage 2TB ex hardware drive). I plugged it into my Mac pro (snow leopard 10.6.8) and it won't read and checking the WD site it says that my Drive is likely corrupted, what can I do please
format the drive for Mac OSX extended journaled.
Verify after format that it cant be written to.
If not return and get a Toshiba or Hitachi HD. Recommend avoiding WD drives. -
How to run older program on newer Mac?
I recently made the switch from Windows to Mac with a brand new Macbook Air. It's running OS X Yosemite 10.10. I'm a screenwriter and so a friend of mine gave me an older copy of Final Draft that was torrented and said it could be used on Lion and Mountain Lion. Every time I go to install it on my Air the Installer says it has to close and then re open then says its going to run a package to see if it can be installed on my computer then spits out an error saying I need to have a newer version of OS X but as far as I can tell I have the newest version. Anybody know a way around this or why it's doing this?
Sorry. You're not going to get help here. You're also not going to get any sympathy for the fact that you're having problems running stolen software on your Mac.
-
Is there a free way to run Windows Programs on a MacBook Pro?
Hi
I am getting my first MacBook Pro tomorrow, and i am just curious as to how i could run Windows only software on it. It will only be a couple of games and music software, but i dont have the OSX version, and i dont really want to buy a new version. I'd rather get a free program that does the same thing as Paralells, but if there is any other paid software that is reliable id like to know.
Thankshelloskoodle wrote:
I'd rather get a free program that does the same thing as Paralells,
VirtualBox
https://www.virtualbox.org/
Problem is virtual machine software is about 1/5th the performance of booting directly into Windows via Bootcamp, this doesn't matter that much of your games are 2D, OpenGl driven and light weight, but 3D games you either want to direct install Windows via Bootcamp...
https://www.apple.com/support/bootcamp/
https://www.youtube.com/watch?v=uVfRQ0YIDUI&feature=related
or better yet, get a Windows 7 64 bit tower with 4GB of RAM expandable to 8GB at least, this way you can upgrade your own video card.
3D video games advance, require video card upgrades, with the Mac platform there are either no video card upgrade ability or options. You can 3D game for a short time on a powerful Mac, but once the game gets updated your slow again and become fragbait.
http://www.cbscores.com/index.php?sort=ogl&order=desc
If you are going both Bootcamp and virtual machine software, then I recommend VMFusion or Parallels Desktop, they have the ability to copy the installed Bootcamp Windows and use it as a another virtual machine Windows, also they have more options, ease of use and abilities than VirtualBox.
Edit: Wine is a opton, however you must check to see if the software your using will work with Wine, not a lot will or if it does it's glitchy.
Maybe you are looking for
-
Trying to Update itunes to ver 11.05 in windows 7
Having trouble updating to itunes ver 11.05. Fixed rule in firewall. But still getting message stating - not connecting with itune server. Can anyone help? I use itune with my iphone and new ipad. But have itunes located on my desktop computer wh
-
i have connected my tv to my macbook and it doesnt work. i researched online and found that i dont have an "arrangement" tab in "display" in system preference. when i search arrange multi displays, this message pops up. "The Arrangement tab of Displa
-
a popup named The Browser Highlighter appears when Mozilla is turned on. it is frozen and does not respond and will not disappear == This happened == Every time Firefox opened == when i updated the the latest version of firefox
-
Hey guys, so recently i have switched from Windows Vista to Windows 7, and when i connected my iPod touch to the computer it was reconised by MyComputer but not itunes. Iv been on EVERY disscussion about updating drivers/ updating itunes(reinstalling
-
Delta Enabled Business Content Extractors and Safety Intervals
Is there a transaction/table from where I can check the safety intervals of Business Content extractors for example 2LIS_13_VDITM. If I created a Z copy of an extractor is there a way of changing this value? Thanks