Running out of I/O

Hello all,
I am using a cFP-2120 LabVIEW Real-Time/Ethernet Network Controller on an 8-slot backplane and I just discovered that I need more I/O-channels. What is the easiest way of fixing more I/O while retaining Real Time/ Deterministic behaviour?
Regards.

Hello ander939,
You can add extension I/O to you Real-Time controller with the use of one of our network interface modules (the cFP-1804(4 slot) or the cFP-1808 (8slot)). You can access the I/O from your cFP-180x network interface module with the instructions provided here.
For more information, please see this presentation on adding expansion I/O to your real-time system.
Please let me know if you have any additional questions.
Regards,
Ching P.
DAQ and Academic Hardware R&D
National Instruments

Similar Messages

Suggestion? Running out of rearms (time) building large master Win7 image - Should I use KMS until capture?

I am building a Window 7 Ent master image containing 200+ engineering applications which will be deployed to 800+ systems. My problem is, I'm close to running out of activations and am now down to one rearm remaining. I have the option of using our
KMS server.
Question: Is it allowed that I point my non-domain member master Windows 7 image at our KMS server to activate the OS while I continue to install software up until the point I'm ready to shut down and capture my master image?
If perform the above-mentioned procedure do I leave the master image pointing at our KMS server during the capture process? Or, do I remove the settings from the registry? After the client is joined to the domain, a GPO points all clients to our KMS server
anyway.
Or does it not matter that I continue building my master build image, with one rearm left, leaving it prompt me that my Windows 7 Ent. copy "may be counterfeit".
Thanks for your time in advance!

Hi,
Yes, you can point a non-domain member master Windows 7 image at your KMS server to activate the OS, it should be done by Manually Specifying a KMS Host with a command:
http://technet.microsoft.com/en-us/library/ff793406.aspx
After the Windows 7 image is activated by the KMS, you can run this command with administrator permission to check the rearm time: Slmgr.vbs /dlv
Details about deploying KMS clients can also be found at :
http://technet.microsoft.com/en-us/library/ff793406.aspx
Regards
v-yamliu

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

MBP running out of battery power before sleeping - Help!

Hi
My MacBook Pro has been running out of battery power before the memory-saving sleep mode kicks in, so it dies with a little click of the HD. It's not a hibernation state as when I reattach the power supply it boots up a new session.
I've noticed this since upgrading to Snow Leopard last year, but put it down to an old battery that had 45% charge and wasn't powering the MBP properly. I now have a replacement A1175 5600mAh battery which is giving me 2-3hrs usage (which I'm pleased at), but now it still dies before sleeping!
I have tried to cycle the new battery, but can't. I have reset the SMC several times, with no effect.
I used to cycle the battery every week or two, running it down until it would no longer wake from sleep, recharge overnight etc, but now I can't do this because it will die before sleeping!
I've read quite a few articles over the net about this issue, but there seems like no cure. It's really annoying me now as I frequently work on the move and a dying MBP could potentially be disastrous.
Can anyone shed some light on this issue? Is there something I haven't tried yet? I think it's a late '06 MBP.
From System Profiler:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5
Battery Information:
Model Information:
Serial Number: ˇ{ïwl"Ó*%#Û˙� $«\
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: a0b0
PCB Lot Code: c0f1
Firmware Version: 8800
Hardware Revision: 0000
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 1320
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 5315
Health Information:
Cycle count: 12
Condition: Normal
Battery Installed: Yes
Amperage (mA): 1500
Voltage (mV): 11560
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: No
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x001e1900
Charging: Yes

If you are not getting a warning, then there is something amiss with your battery. If a SMC reset and calibration does not fix the problem, then you may need to make an appointment at the genius bar and arrange to have your battery tested.
My old battery started doing the same thing--shutting down without warning. I replaced it, and the replacement battery started doing the exact same thing. I then returned the replacement, and the next replacement battery behaves in a normal fashion.
My first battery was worn out. My second battery was defective. My third battery is good.
Your battery should still be under warranty. Go back to where you got it and show them what it is doing and see if you can get a replacement.
Good luck!

Message: You will run out of storage when your downgrade takes effect

In my email, I received a message today with the subject
You will run out of storage when your downgrade takes effect
I looked in my account and don't see anywhere where I've set it to downgrade. It's still set at the correct level. I checked the credit card to make sure it hadn't expired.
Any thoughts of what else I could check?
Here's the email:
As requested, your iCloud storage will be downgraded to 5 GB on 02/27/2015. However, you are currently using 6 GB.
Unless you take action before your downgrade takes effect, backups to iCloud will stop, and apps will no longer be able to save documents to iCloud. You can either free up storage or cancel your downgrade to keep your current storage plan for another year.
To continue using these iCloud features without interruption, you can cancel your downgrade by selecting a different storage plan:
1.
On your iOS device, go to Settings and tap iCloud
2.
Tap Account.
3.
Tap your current plan, then choose from the options presented
For more information on managing your iCloud storage, please read this Learn how to manage your iCloud storage >.
The iCloud Team

Sounds to me like you're not the original owner of the device.
Did you buy it secondhand? From where?
~Lyssa

I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge?

I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge? Will the new one become less effective if it sits around too long?

How much capacity is remaining on your current battery?
Check your power status
From the  menu: Hold OPTION and click System Information... èHardware è Power
Copy and Paste in your reply.
The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
Long term storage (6 months):
Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
http://www.apple.com/batteries/

Connection leaks and application is running out of connection

Hi All,
We have configured the SQL Database external resource for OBPM specific connection pool. All the business processes are using the Fuego.Sql package for the data base transaction calls. I have no clue how this package is managing the database connections. If more than 25 users perform concurrent testing, the application is running out of connections. Connection pool configuration details as below.
Maximum Pool Size : 500
Maximum connections per user : 50
Minimun Pool Size : 0
Connection Idle Time (mins). : 5
Maximum Opened Cursors : 1000
Please share your thoughts on how I can track and fix this issue. Also please let me know the answers below.
1. Is there any way to find out the stats about the connection pool
2. If I configure the remote JDBC that points to J2EE datasource, would that fix this issue.
I appreciate your help.
Thanks,

Can anyone please share your ideas?
Thanks,

How do I use an external hard drive with iMovie 10.0.1? I have run out of disk space on my Macbook Air.

How do I use an external drive with iMovie 10.0.1? It is not obvious and I have run out of space.

If you want to move a complete iMovie 10 library (file with .imovielibrary extension) click on the library in the libraries pane and select File - Consolidate Library Media. This ensures that all media is copied to the library. You can then move the library onto your external drive using Finder. The first time to want to access it from iMovie you will have to tell it where it is by choosing File - Open Library -Other and navigating to it.
If you only want to transfer part of a library to another drive, create a new library a at the desired location File - Open Library - New and copy projects and events to it from within iMovie.
Its all described in iMovie help - "Work with multiple libraries".
Geoff.

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

I get this message when trying to past simple text into an e-mail document. The Web-Based Email plugin has crashed. I have run out of options...please help.

The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Battery issues!! takes 6hrs to charge and runs out in less 2hrs

I've had my laptop(unibody 2008 model) for 8 months now. I've noticed that battery life is so much shorter than the one I had before (early 2007 model)
However, when i took it to apple service center they said there's nothing wrong with the numbers and it all looks normal. so i've just been using it since there was nothing i could do...
Is it really normal for your battery to take more than 6 hours to charge?(all i did was web browsing)
Also, NOW the battery runs out in less than 1hr and half...
Full charge capacity (mAh): 3468
Cycle count: 234
Condition: Check Battery
iStatPro says my battery health is 75%
they guys at the apple center said that it's because my cycle counts are too high but come on! since my battery ran out in less than 2hrs 30mins from the beginning, I just had to charge it more often...
this is something new that just started happening
my laptop just shuts down the second it gives me the 10minute warning...
Is there anything I can do so apple replaces my battery or am i just doomed to buy a new one?
it's frustating how apple keeps saying there's nothing wrong with it..

Apple rates your battery to retain 80% of its original Full Charge Capacity (4650 mAh) after 300 cycles:
http://www.apple.com/batteries/notebooks.html
Yours has only 75% of its original capacity after only 234 cycles and is now faulty — that's what the "Check Battery" notation in System Profiler indicates. Point this out to the manager of your local Apple Store and ask to have it replaced. If you don't get anywhere with the manager, call Apple Customer Relations at 1-800-767-2775 and make the same request, explaining that the store has failed to comply. Be polite, patient and calm at all times, and be explicit about your reasonable expectation that Apple will make good on what it says you can expect of your battery.

Run out of licenses, can do 20 reports in 20 minutes before receiving error

I have a problem with running out of Licenses when using our ASP.NET Web Application.Our Web Application exports and opens a Crystal Report to PDF when the user clicks on the report link. Unfortunately we have only a certain number of licenses available and after each use it's useless for about 20 minutes! In a 20 minute period we are able to run up to 20 reports before getting the "out of licenses" error page. So if you have 5 users going through multiple reports in a short time we've run out of licenses and they have to wait 20 minutes before trying again!?! I am trying to find a means of improving this and have a few thoughts on how:<ol><li>Close the license being used (and make available to somebody else) once the report is created. We generally do not have 20 concurrent users at any time but in a 20 minute time span we can have over 20 report requests. </li><li>Shorten the time before the license becomes available again (like to 5 minutes) Long enough for even the larger reports to run, but short enough that the chances of 20 reports being requested in a 5 minute period is slim. </li><li>Save the License use for that particular USER for the period of time (so if they open 1 or 10 reports it all utilizes the same License). This would work fine because it's a small office of just over 20 users and the chance of everybody accessing reports in that same 20 minutes is very low. </li></ol> If anybody has any ideas, suggestions, hints, or "it can't be done" I would greatly appreciate it! We haven't found anything in the RAS settings and I haven't found anything that effects the LICENSING in .NET (and using Report.Close() does not free up the license). Thanks,~Drew 

Alright, I seem to have some success in fixing this issue, though it isn't the 100% best solution. I create the ReportDocument in the Global.asax.vb file 
<blockquote />Dim crpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument Session.Contents.Add("crpt", crpt)</blockquote>and then I re-use this in the page that exports the file to PDF and displays it. Since this is created as a session-level object in Global.asax.vb I reference it in the display page as Session("crpt") and I clean it up by the end of the page but I don't make the session object into nothing.<blockquote>If Not IsNothing(Session("crpt")) Then<blockquote>Session("crpt").Close() System.Runtime.InteropServices.Marshal.ReleaseComObject(Session("crpt"))</blockquote>End If </blockquote>Then on Session End in the Global.asax.vb I clean up the Session variable and call the garbage collection.<blockquote>If Not IsNothing(Session("crpt")) Then<blockquote>Session("crpt").Close() System.Runtime.InteropServices.Marshal.ReleaseComObject(Session("crpt")) Session("crpt") = Nothing Session("crpt").Dispose()</blockquote>End If GC.Collect() </blockquote>It seems to be working at this time though there is the limitation that now everybody who enters the web application gets an object whether or not they are going to run reports. The more ideal situation would be for the object to not be created until the user enters the report page or have the page that creates/displays the report to check if the object exists and if it does not to create the object.

Mavericks Mail Kernel System Has Run Out of Application Memory

I have a new Mavericks late 2013 MBP. When I got the computer, I used Migration Assistant to transfer everything from my late 2008 MacBook to the new MBP. Now when I launch Mail, my memory use skyrockets and within a minute or so, I get a "run out of application memory" error message. Soon after the computer stops working until I reboot. Activity Monitor shows Memory Pressure at its redline max, Virtual Memory at about 70 GB, Swap Used 20 GB, Compressed 10 MB. The processes using all the memory are kernel-task 10 GB and mds_stores 5 GB. However, Spotlight is fully indexed and mds is inactive until I launch Mail.
Interestingly, it happens even if I quit Mail immediately after launching it - the Mail window doesn't even need to open; the memory ust still climbs. But it only happens with Mail; all other applications work fine. Also, it does not happen if I boot in Safe Mode or if I log in using a different user account.
I have spend many hours on the phone with the Apple tech guys, they sent log files to Apple engineering, and none can figure this out. Their solution is to work around by creating a new user and transfer files over - not an elegant solution...
I ran the diagnostic suggested by Link Davis; results copied below. I also ran the Etresoft diagnostic both before and after launching Mail. Results also copied below.
I am guessing that a 3rd party application in my user area causes Spotlight to loose control, when Mail is launched, perhaps trying to index 10,000 emails, but I really have no idea!
Any help would be GREATLY appreciated!
Link Davis Diagnostic
Step 1
nothing
Step 2
com.google.keystone.daemon
com.adobe.fpsaud
Step 3
com.google.keystone.system.agent
com.displaylink.useragent
com.zeobit.MacKeeper.Helper
com.spotify.webhelper
com.facebook.videochat.rossmeador.updater
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Step 4
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
.DS_Store
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
DivX Toolkit.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Skype.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
AmazonMP3DownloaderPlugin101750.plugin
DRM Plugin.bundle
Default Browser.plugin
DirectorShockwave.plugin
Disabled Plug-Ins
DivXBrowserPlugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
GarminGpsControl.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npdivx.xpt
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.displaylink.useragent.plist
com.google.keystone.agent.plist
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.displaylink.usbnivolistener.plist
com.google.keystone.daemon.plist
/Library/PreferencePanes:
DivX.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
.DS_Store
AppleIntermediateCodec.component
AppleMPEG2Codec.component
macam.app
macam.component
/Library/ScriptingAdditions:
/Library/Spotlight:
.DS_Store
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
HP IO
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
CitrixOnlineWebDeploymentPlugin.plugin
FacebookVideoCalling.bundle
Picasa.plugin
WebEx.plugin
WebEx64.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
com.facebook.videochat.rossmeador.plist
com.spotify.webhelper.plist
com.zeobit.MacKeeper.Helper.plist
Library/PreferencePanes:
Library/QuickTime:
Google Camera Adapter 0.component
Google Camera Adapter 1.component
Library/Services:
.localized
Step 5
Nothing
Etresoft Before Launching Mail
Hardware Information:
MacBook Pro (Retina, 13-inch, Late 2013)
MacBook Pro - model: MacBookPro11,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
16 GB RAM
Video Information:
Intel Iris - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
HP IO - Path: /Library/StartupItems/HP IO
System Software:
OS X 10.9 (13A2093) - Uptime: 0 days 0:6:5
Disk Information:
APPLE SSD SM1024F disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 999.7 GB (761.42 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[not loaded] com.displaylink.usbnivolistener.plist
[loaded] com.google.keystone.daemon.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[failed] com.displaylink.useragent.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.facebook.videochat.[redacted].plist
[loaded] com.spotify.webhelper.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
None
3rd Party Preference Panes:
DivX
Flash Player
Flip4Mac WMV
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
AmazonMP3DownloaderPlugin101750.plugin
Default Browser.plugin
DirectorShockwave.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
GarminGpsControl.plugin
Google Earth Web Plug-in.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin.plugin
Picasa.plugin
WebEx.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
 2% WindowServer
 1% EtreCheck
 0% coreservicesd
 0% Dock
 0% CoreServicesUIAgent
 0% imagent
Top Processes by Memory:
344 MB mds_stores
213 MB Safari
115 MB Dock
82 MB mdworker
66 MB mds
33 MB MacKeeper Helper
33 MB PluginProcess
33 MB WindowServer
16 MB com.apple.dock.extra
16 MB storeagent
Virtual Memory Statistics:
12.72 GB Free RAM
1.77 GB Active RAM
176 MB Inactive RAM
1.33 GB Wired RAM
660 MB Page-ins
0 B Page-outs
Immediately After Launching Mail
Hardware Information:
MacBook Pro (Retina, 13-inch, Late 2013)
MacBook Pro - model: MacBookPro11,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
16 GB RAM
Video Information:
Intel Iris - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
HP IO - Path: /Library/StartupItems/HP IO
System Software:
OS X 10.9 (13A2093) - Uptime: 0 days 0:8:39
Disk Information:
APPLE SSD SM1024F disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 999.7 GB (761.39 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
[failed] com.apple.pictd.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[not loaded] com.displaylink.usbnivolistener.plist
[loaded] com.google.keystone.daemon.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[failed] com.displaylink.useragent.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.facebook.videochat.[redacted].plist
[loaded] com.spotify.webhelper.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
None
3rd Party Preference Panes:
DivX
Flash Player
Flip4Mac WMV
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
AmazonMP3DownloaderPlugin101750.plugin
Default Browser.plugin
DirectorShockwave.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
GarminGpsControl.plugin
Google Earth Web Plug-in.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin.plugin
Picasa.plugin
WebEx.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
 98% mds_stores
 31% Mail
 3% WindowServer
 1% opendirectoryd
 1% EtreCheck
 1% fontd
 0% usernoted
 0% coreservicesd
 0% Dock
 0% mDNSResponder
Top Processes by Memory:
9.67 GB mds_stores
262 MB Mail
213 MB Safari
115 MB Dock
98 MB mds
66 MB ReportCrash
66 MB WindowServer
49 MB Notes
49 MB SystemUIServer
33 MB MacKeeper Helper
Virtual Memory Statistics:
1.54 GB Free RAM
12.70 GB Active RAM
396 MB Inactive RAM
1.37 GB Wired RAM
954 MB Page-ins
0 B Page-outs

Have you looked into Activity Monitor utility to see what system resources exist and how they are being allocated to applications, the OS X, and other background functions?
You could boot in SafeBoot (shift key held through startup) and run Disk Utility> repair disk permissions. That can tell you a few things about your hard disk drive, capacities, and it may not hurt to repair disk permissions. Restart normally when done.
Or try & boot from the Install DVD and use the version of Disk Utility in there to attempt to 'repair disk' while the HDD is unmounted. Then choose Startup manager to boot from the HDD and ignore the DVD on a restart.
Is your computer as listed, a PowerPC (pre-intel architecture)
Apple product, with a G4/G5 CPU from before 2006? If so,
a host could move the discussion from this Intel area.
Without more information, a failure of traction results from speculation.
Is your computer still running OS X 10.5.3, or is that 10.5.8+ now?
Good luck & happy computing!
edited 2x

Running out of I/O

Similar Messages

Maybe you are looking for