Running PI on iSeries or Windows platform??

Hi,
We are in the process of purchasing/installing PI 7.1. We are running our ECC6.0 on iSeries and we are now considering what platform to use for the PI. Our server guys are a bit worried that a PI on the iSeries might cause performance problems or the need to purchase additional hardware.
Are there any advantages (or disadvantages) to put the PI on a windows platform when ECC is on iSeries?
best regards,
Glenn Karlsson

Hi Glenn,
have you done your choice ?
I can say that iSeries is much more stable for SAP Java stack ! 
Naturally depending on the volume of messages worked by PI ......... and the HW available resouces on your iseries server.
I've bad feedback from my customers with PI on Windows but depends on workload.
You might do a sizing by your IBM partner.
No problems with a mixed landscape windows for PI and iseries for ECC.
Kind Regards
Fabio

Similar Messages

  • Calling RPG program from SAP running on windows platform.

    Hi
    We want to call a RPG program used for sending and receiving data to SAP System.  Our sap system running on windows platform and RPG program run iseries V5R3
    How can we do this?
    We red the redbook http://www.redbooks.ibm.com/redbooks/pdfs/sg244672.pdf. We thought it only mention about sap and externel system is as/400 and it is not related with our issue but we are not sure.
    We are waiting for an urgent suggestion.
    Best Regards...

    Hi, We also need to call RPG from ABAP via RFC. We have installed the RFC SDK on A/S400 and tried call ABAP RFC from RPG, but still don't know how to make RPG program callable from ABAP
    Any advice!
    Many thanks
    Tim

  • I want to use microsoft office on my mac. I need it to run on windows platform. Which is better: boot camp or parallels 7 ?

    I want to use microsoft office on my mac. I need it to run on windows platform. Which is better: boot camp or parallels 7 ?

    Welcome to Apple Communities
    You can install Office for Mac. If you don't want it, Boot Camp uses all the hardware, so it has the best performance for Windows, and Parallels allows you to run Windows in Mac without reboot and without Boot Camp. To use only this, download Parallels

  • Would *.vi files run on a Windows platform if they were developed on a Unix platform?

    I have been working on a Linux machine with Labview 6.1, and would like to know if the *.vi files would run on a Windows platform running Labview.

    Absolutely. I don't recall that there are any Platform dependent calls in LabVIEW for Linux. Give it a shot, and please post here if you have any problems.
    Congratulations for choosing Linux, and LabVIEW for Linux.
    I have always been a proponent of platform independent programming, and of Linux/Unix (okay, ANYTHING but Windows...evil, pure evil...). If you develop in Linux, and run in Windows, you are in fact developing a platform independent program (at least, if there are NO platform dependent calls in your program...)
    Good luck, and keep us posted.

  • I would like to run a stock analysis program called Toolkit 6 on my Macbook Pro, but it only works on the Windows platform.  Is there software that allows me to run Windows applications on the Mac?

    I would like to run a stock analysis program called Toolkit 6 on my Macbook Pro, but it only works on the Windows platform.  Is there software that allows me to run Windows applications on the Mac?

    Yes it's MS Windows! You will need a license of MS Windows (preferable Windows 7) and from there you can decide on the strategy for running Windows on your iMac. You can use Boot Camp (you already have this) or you use virtualization software such as Parallels or Fusion. For your situation I'd recommend virtualization software. However for only one program I'd do some due diligence to see if there is a OS X version. You can start with the App store or simply use Google to search.
    Kappy has provided a good article on running Windows on a Mac and the various options. Here is the link:
    Kappy's explanation
    Roger

  • How can i register my New Ipad with two different device running on windows platform.

    can i register my ipad with my home lappy and my office desktop running on windows platform.so that there will be no issue while syncing my ipad with two differenr device.

    Bernard Baz wrote:
    Is there a 3rd party app that could help and that would not relie on iTunes.
    Use iCloud to backup the iPad. Many users don't use their iPads with iTunes at all anymore. Personally, I would never rely only on iCloud, but I would guess that millions of iOS users are now using only iCloud and not backing up with iTunes at all.
    iOS: How to back up and restore your content - Support - Apple

  • How to run JDeveloper on non-windows platforms?

    I downloaded the base install package from http://www.oracle.com/technology/software/products/jdev/htdocs/soft11tp.html and unzipped the resulting package. It seems to have Windows .exe files in it and not shell scripts or pure Java.
    How does one launch JDeveloper from this package on Linux or OS X? Or is there an alternative package somewhere to look for that is intended for use on non-Windows platforms?

    Alansil,
    The [url http://www.oracle.com/technology/products/jdev/htdocs/11tp/install.html]install guide has specific instructions for both Linux and OSX.
    You may also be aware - the JDev 11g ADF version is going to be released within a week or so (announced at OOW)
    John

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • When I Run Firefox It Says "XUL Runner" Platform version 1.9.2.3 is not compatible with min version 1.9.2.3 max version 1.9.2.3.

    When I Run Firefox It Says "XUL Runner" Platform version 1.9.2.3 is not compatible with min version 1.9.2.3 max version 1.9.2.3
    == This happened ==
    Every time Firefox opened
    == It Updated ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • How to compile a form built in forms 10g on windows platform?

    Hi All,
    I have built a 10g form on my local desktop on windows 7 and compiled/deployed it in apps on linux server.
    I need to deploy the same form fmb on oracle apps hosted on windows platform. Please let me know if fmb works fine or not. And also provide how to compile form in windows platform..like frmcmp_batch command
    Thanks,
    Veena

    The fmb, mmb, and pll files are portable to any platform where Forms can be installed. Every installation that supports running Forms comes with the necessary components to generate the executible files (fmx, mmx, plx). On your Windows machine, if you have the Builder installed, you can generate an FMX using the Builder. If not, you can directly use the compiler. The compiler has a gui option and a command line option. If you do not pass any arguments into the executible (frmcmp.exe) the GUI will start. Alternatively you can generate from the command line (DOS). You may need to set PATH, ORACLE_HOME, TNS_ADMIN, and possibily some others in the DOS shell in order for it to work.
    If you have access to MyOracleSupport, refer to the following note:
    <blockquote>Moving Forms Applications From One Platform Or Machine To Another (Doc ID 299938.1)</blockquote>
    Example:
    <blockquote>frmcmp.exe module=myForm module_type=form userid=scott/tiger@orcl compile_all=yes</blockquote>
    More options are discussed in the Builder Online help and the compiler help.

  • Cannot execute sapevt.exe on a Windows platform

    Hi
    for some reason I cannot get the sapevt.exe program to raise an event in SAP when running on a Windows platform. The command line I'm using is :
    D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\sapevt.exe event=EVENT_NAME -t2 name=<SID> pf=D:\usr\sap\<SID>\SYS\profile\DEFAULT.PFL
    It doesn't write an dev.evt trace file either. Also I'm using inside a VB script.
    I can raise the event from within SAP Tcode SM62 and it runs fine in a Unix environment with slightly different parameters of course
    Anybody help please.
    I've looked at notes 802172 and others and tried all the suggestions within.
    Thanks
    Regards
    Steve

    I have the following command defined in SM69 that works on our Windows-based SAP systems:
    Operating system command = sapevt
    Parameters for operating system command = ? -p ? -t pf=$/DIR_INSTALL/\profile\default.pfl
    Additional Parameters Allowed is checked
    What not try and define that and then trigger it inside SAP itself? It might clue you in as to what the issue might be. The input parameters are the event name and then any additional parameters when triggering the event.
    Brian

  • Got exception when running CrystalReportViewer on 64 bit Windows 2008

    We have a client/server app built with c#, .NET2, CR2008 .net runtime SP2, and VS2008. The smart client hosts a CrystalReportViewer, which consumes the ServerFileReportService.
    The client on XP, 2003, Vista, and 32 bit Windows 2008 works fine with 32 bit Windows 2008/2003 server. But the client on 64 bit Windows 2008 throws the following exception,
    EXCEPTION >>
    IndexOutOfRangeExceptionMessage: Index was outside the bounds of the array.
    Source: CrystalDecisions.Windows.Forms
    TargetSite: System.String GetResourcePath()
    StackTrace:
       at CrystalDecisions.Windows.Forms.ParameterPromptControl.GetResourcePath()
       at CrystalDecisions.Windows.Forms.ParameterPromptControl.BuildPromptingRequestContext(PromptingHTMLFeedback feedback)
       at CrystalDecisions.Windows.Forms.ParameterPromptControl.BuildPromptingRequestContext()
       at CrystalDecisions.Windows.Forms.ParameterPromptControl.StartPromting()
       at System.Windows.Forms.Control.OnVisibleChanged(EventArgs e)
       at System.Windows.Forms.Form.OnVisibleChanged(EventArgs e)
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Edited by: Frank88 on Oct 9, 2009 8:55 PM

    Hi Jonathan,
    Currently the .NET solution contains over 70 assemblies, and only one assembly has reference to CR2008 .Net runtime SP2.  All the 70 projects for each assemblies are compiled with Platform Target set to Any CPU.  We build an installer with InstallShield, which deploys the runtime by CRRuntime_12_2_mlb.msi.
    If we resolve all the parameters, and donu2019t prompt user for the parameters, then the same report runs fine on 64-bit Window 2008. Otherwise we always get the error on prompting parameters.
    We resolved the issue by recompiling the exe with Platform Target set to (x86). And all the 70 assemblies are still compiled with Any CPU.
    Regards,
    Frank
    Edited by: Frank88 on Oct 12, 2009 11:07 PM
    Edited by: Frank88 on Oct 13, 2009 9:30 PM
    Edited by: Frank88 on Oct 14, 2009 3:28 AM

  • How to make a project can be setup on windows platform by itself??thanks

    i create a project using jbuilder and i have finished it&#65292;
    how can i make it to a windows application and it can be setup on windows platform?
    it can be run as a window's service,when windows starts,it starts.

    Hi,
    After making your site SSL enabled, you might need to create
    self signed certificates which later you can distribute it for the
    subscribers of your webservice.
    The subscribers in turn need to install the certificates with
    their browser in order consume your webservices...

  • Comm api for windows platform

    I want to use comm api with JSP on windows platform.
    I am using Tomcat 5.0 for running JSP.
    On Sun's site comm api available only for solaris and linux platforms.
    what should i do?
    I also want to know prefered settings for configuring comm api with Tomcat. i.e.Where should i put appropriate comm API file in Tomcat?
    Please also mention the necessary settings for classpath.
    Thanks for help in advance.

    Version 2.0 of Java Communications was available for Windows, though I can't see how to download it from the Sun web site now...

  • HT1899 Do I Really Need to Install Windows Platform on a New iMac w/ Mountain Lion?

    Greetings.
    Do I need to install Windows 7 (or some other version of MS Windows) in order to run Windows based software?  For example, I want to run AutoCAD 14.  Will this install and run on my new Mountain Lion iMac without having MS Windows Platform installed? 
    Any help would be greatly appreciated.
    MarkCAFL

    If you want to install and use Windows programs you must install Windows either natively using Boot Camp Assistant or in a virtual machine such as Parallels, Fusion, or VirtualBox.
    Many programs have a Mac version. AutoCad 2013 is available for Windows or Mac http://usa.autodesk.com/autocad/trial/. I am not famiar with AutoCad 14 so you will need to do your own research.

Maybe you are looking for