Running Plus80w.exe

I installed oracle 9i release 2 on the machine and afterwards I installed Forms Developer 6i. When I tried to run Repository Developer Build, Revoke or Grant, an error message is launched and quit the application. This occur when Plus80w.exe is running. My Windows version is XP Home Edition. What should I do to resolve this problem?

Hi,
I couldnt understand your exact problem. What I could understand is that when you ran repository it gave you an error and quit. You didnt write what happened after that can you run plus80w.exe after that or not?? May be there is some problem in the script (for repository). Most of the scripts i have seen have exit in them at the end so they have to exit after running.
Please explain your problem in more detail.
Regards
Ghulam

Similar Messages

Error while running sawserver.exe file

Hi All ,
I installed OBIEE 11.1.5 in my machine and Database is in different machine (For RCU) .OBIEE reports are working fine but, I tried to run sawserver.exe file to register new instanceconfig file to implement multiple rpds and Catalogs in OBIEE 11G by referring the below link.
http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
Command that I used is : sawserver.exe -c D:\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfigdemo.xml
Am getting the Error : the procedure entry point long jmp count not be located in the dynamic link library orauts.dll
Thanks in Advance .

Hi,
How can i do it in OBIEE 11G? Any help will be grateful
Regards,
Joni

Running an exe from within Oracle WebLogic 10g R3 does not find dll

Hi,
I am facing a strange issue with Oracle WebLogic 10g R3.
I use the code as shown in Listing 1 below to run a windows based application exe (batch job) from within my web application hosted on Oracle WebLogic 10g Release 3.
Note that this code woks fine on Tomcat 6.x and OC4J (JDeveloper TP4).
The exec gets executed but the log of the exe program shows it could not load certain DLLs.
Note that these DLLs are in the same directoy as the Batch program and this directory is in the PATH.
Running through simple Java Program Successful*
When I run the same program from a java program it runs successfully. So this means some WebLogic environment does not get set properly.
Running directly BatchProg.exe rather than cmd.exe fails*
Also note that when I run the exe directly e.g. BatchProg.exe rather than through cmd.exe it gives me a error the system did not find the file specified.
CreateProcess error=2, The system cannot find the file specified with cause java.io.IOException: CreateProcess error=2, The system cannot find the file specified
Listing 1:*
String[] commandArgs = new String[|http://forums.oracle.com/forums/] { "cmd.exe", "/C", "BatchProg.exe \"param1\" \"param2\" " },null , l_workingDir)
Runtime rt = Runtime.getRuntime();
Process proc;
proc = rt.exec( commandArgs, envParams, workingDir );
ProcessIO errStream = new ProcessIO( proc.getErrorStream(), "ERROR");
ProcessIO outStream = new ProcessIO( proc.getInputStream(), "OUTPUT");
errStream.start(); // process any errors from the command
outStream.start(); // process any output from the command
System.out.println("Error=" +errStream);
System.out.println("Out" + outStream);
return (p_waitToFinish ? proc.waitFor() : this.SUCCESS);

OK.
I have posted this on the WebLogic Forum.
Thanx.

T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

Hello,
I was able to reproduce the following problem on a T400.
- unattended installation of WXP-SP3 (slipstreamed)
- reboot
- install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
- reboot
At this point, the video driver is well configured.
- Reboot once or twice, video driver still good.
- Boot the T400 on WinPE 2.0
- Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
- Shutdown the T400, and reboot on C:\
- At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
Then I get an ATI error telling the driver is missing or not well installed.
- When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
(without re-installing the driver ...)
Anyone has an explanation ?
Please not I did not run "sysprep.exe" before capturing with ImageX.exe
stefan

Update on this problem.
After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
After rebooting the T400, the ATI driver was fine.
Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
Stefan

I can download firefox, but when I try to run it, windows 7 asks me to select a program type to run the *.exe file

I am running windows 7 with IE 10. I want to switch to Firefox as my browser. I am able to download the Firefox Setup 22 0 exe, but when I try to open or run it, windows prompts me to "choose the program you want to use to open this file". This happens with both the Firefox Setup Stub 22 0 exe (274kb) and the Firefox Setup 22 0 exec (21,239Kb). I can't find any program on Windows to run this exe. Same thing happens when I try to run the troubleshooter exe.

Hello annsboland
Do you have also problem with others exe files ?
try to create a new user account in Windows 7 and check it again
see if the next articles in the links helps to create the new account:
http://www.bleepingcomputer.com/tutorials/create-new-user-account-in-windows-vista-7/
http://www.pcadvisor.co.uk/how-to/windows/3326039/how-add-new-user-account-in-windows-7/
thank you

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

How many times can I run PSConfig.exe -cmd upgrad .... command

I'm getting VSS error in my eventlog -> application. I was getting 8213 and followed http://technet.microsoft.com/en-us/library/cc734219(v=ws.10).aspx and
now I'm gettting 8230.
Meanwhile my backups not are running. I remember running PSConfig command when I first installed windows and sharepoint 2010 on this box for system backup to work correctly.
Now I run WMIC QFE LIST FULL /Format:HTable > C:\Temp\HotfixList.html to retrieve all the installed update to check if KBs
2460045 or 2687453 are installed unnoticed but I don't have any history of installed updates suprising eh!
Now I want to run
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent
-install -cmd installfeatures
just incase one of them have been installed unnotice.
How many times can I run this PSConfig command? How dangerous is this decision?

You can run it as many times as you want, but it will take SharePoint down on that particular server (resets IIS, for example), while it executes.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Error while running sapccmsr.exe on Netweaver Trial

Hi there,
I've installed Netweaver Trial on my laptop, and I'm trying to run 'sapccmsr.exe -R' from the command to register the CCMS monitoring agent.
It almost works, but then comes up with the following error:
"After entering the RFC logon info for the user, the password
will be stored here on this machine in a Secure Storage.
      client [000]                        :
      user [CSMREG]                      : sap*
      language [EN]                      :
      hostname of NSP message server [localhost] :
      use Load Balancing [n]/y ?         : n
      hostname of application server [localhost] :
      system number (00 - 98) [00]       :
      [optional] route string             :
      trace level    [0]                  :
      please enter password for [NSP:000:sap*]: *******
Try to connect ...
INFO: Updated saprfc.ini in agent work directory C:\saploc\PRFCLOG\sapccmsr
ERROR: Registration failed: Can't get version of NSP. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
EXITING with code 1"
any help much appreciated, I'm a SAP newbie !
TIA.
Stuart.

Hi,
I have exactly the same problem.
sapccmsr -R -j2ee pf=<dir>
      client [000]                        :
      user [CSMREG]                      :
      language [EN]                      :
      hostname of PIT message server :
      use Load Balancing [n]/y ?         :
      hostname of application server :
      system number (00 - 98)      :
      [optional] route string             :
      trace level    [0]                  :
      please enter password for [PIT:000:CSMREG]:
Try to connect ...
INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/<SID>_<SN>/sapccmsr
ERROR: Registration failed: Can't get version of PIT. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
I have tried to register it via visual admin but the same error appeared.
OS: AIX
DB: oracle 10.2.0.4.0
SAP component: PI7 (SAP NetWeaver 2004s)
Any help?
Thanks in advance
Edited by: Jan Hinka on Jul 2, 2009 6:46 PM

Getting error while running sapinst.exe

Hi Gurus,
I have an error while running sapinst.exe.
===============================
Error: Home directory is not available for user sapsdt
Opened sylib722.dll
exe dir is I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818
MessageLib initialized successfully.
Creating file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
Removed file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
Initialized SAP kernel tracing to file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel
Opened I:\usr\sap\PD3\tmp\3\sapinst_exe.10440.1359197818/iaguieng722.dll
Initialized SAP kernel tracing to file dev_sap_kernel
receiving and sending on port 21200
existence check for user PD3ADM returned true.
inserted account (***ADM, S-1-5-21-2072974133-1425365782-667646791-181569, USER) into the accountcache.
Account sapsdt has ADS path 'WinNT://US5885SPAD/sapsdt'
existence check for user sapsdt returned true.
inserted account (sapsdt, S-1-5-21-1572296251-1555274763-1146236042-1004, USER) into the accountcache.
Password set for account sapsdt.
Environment variable SAPINST_JRE_HOME set to value 'I:/usr/sap/***/tmp/3/sapinst_exe.10440.1359197818/jre'.
System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'ATL::CRegKey::Open' with parameter (hKeyParent, SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-1572296251-1555274763-1146236042-1004, 0x20019), line (95) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp), stack trace: sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
Exception thrown near line 95 in file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
Stack trace:
sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
At line 95 file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
Call stack:
sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
======================================
can someone please help me out for error.
Thanks in advance

check user profile in AD, add a path in the user profile Home folder directory of user SAPSDT, restart sapinst.

Error while running 'ldifde.exe' to import the schema file

Hello,
I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution.
Regards.
Ashane Deshapriya ( MCP )

Can you run these commands from an elevated powershell and try to install exchange.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
If that also fails please post the error.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.

Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic

Error while running clustersetup.exe

Hi,
Can somebody please help me on installing Oracle9i RAC.
I have 2 nodes ( Dell poweredge 6300 with Windows 2003 Advance server ). I have already configured public and private ip. Also, i am able to ping private and public ips from both the nodes. The storage is also configured.
I am running clustersetup.exe from pre_install folder. The screen where it asks for pulic and private names , the nodes are not automatically displayed. I have to manually key in the pulic/private names. In the end the cluster setup fails with following error
Unexpected signal : Exception_Access_violation at pc = ...
Finally, i checked the required files are already copied on windows\system32\osd9i folder on both nodes. The registry entry is also updated under hkey_local\software\oracle\osd9i. But, OracleCMservice9i , OracleOjectService and OracleClusterVolumeService services are not created.
Can someody please help me resolve this.
Thanks in Advance
Regargds
-Firoz

Did you add "D:\jdk1.4\bin" to the end of the Path variable? Perhaps the OS is finding another java.exe before it finds the one in d:\jdk1.4\bin. Try putting "D:\jdk1.4\bin;" at the start of the Path variable.

Captivate 7 does not run the exe on windows xp

We are using adobe captivate 7 installed (trail version ) in a windows 7 with SP1 computer . when we publish it and run exe in the windows XP (home ) under administrator we get following error even if the flash player is updated.
"" The installed version of Flash Player is not the latest. The latest Flash Player version has been installed successfully without affecting your existing Flash Player installation. Double-click the EXE again to run it.""
when we click OK it disappears and when we run the exe for the next time it runs . whereas if we run the same exe in the other user (not having admin permission ) also gets the same error and after clicking OK if we run exe again it shows the same error message again and again .
we have tested in win 7, win 8 , win server 2012 it works fine.
please suggest me why it comes and how to prevent it .

Installing on Windows is pretty simple, unless there is something that prevents the java environment from starting the console. Check the path environment variable and make sure there are no other jdk mixed. Check that the windows security doesn't prevent the oui console from starting, it happens that the windows security blocks java applications, and if you asked it to do it by clicking accept, then it won't start.
~ Madrid
http://hrivera99.blogspot.com/

"Error running javac.exe compiler" when using ant to compile Eclipse plugin

Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target

<target name="compilePlugin">
     
     
     <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
     
     <delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
     <mkdir dir="${param.plugin.dir}/${build.dir}"/>
     
     <javac      srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
               destdir="${param.plugin.dir}/${build.dir}"
               failonerror="${javacFailOnError}"
               verbose="${javacVerbose}"
               debug="${javacDebugInfo}"
               deprecation="${javacDeprecation}"
          optimize="${javacOptimize}"
               source="${javacSource}"
               target="${javacTarget}"
               fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
          <classpath refid="compile.classpath" />
     </javac>
     
     <copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
          <fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
     </copy>
     <jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
     <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
Oceanman

I encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps.

Running Plus80w.exe

Similar Messages

Maybe you are looking for