Running PowerPC 10.5.8 software on new Intel 10.8.5 MacBook Pro

Head scratcher for you Pros:  Have new MacBook Pro Intel 10.8.5 and my old PowerBook 17" Pro G4 PowerPC 10.5.8.
Have Final Cut Pro version 6.1 running beautifully on the old PowerPC, and burning Blu Rays discs, etc, just fine.
I need to be able to run this FCP software in the field on my new Mac Book Pro so I can download CF media files to an
external hard Drive I use for FCP editing on the old system back in the office.
Do any of you know of any Virtual Machine or Virtual Box or Parallels, or any software out there that will let me run this
older software on my new Mac?  When I try to instal Final Cut Studio on the new one, it says "cannot run installer because
PowerPC software is no longer supported", even though the install discs say that both PowerPC and Intel chips are both
minimum requirements, above 10.4 OS.

Do any of you know of any Virtual Machine or Virtual Box or Parallels, or any software out there that will let me run this
older software on my new Mac?  When I try to instal Final Cut Studio on the new one, it says "cannot run installer because
PowerPC software is no longer supported", even though the install discs say that both PowerPC and Intel chips are both
minimum requirements, above 10.4 OS.
You cannot run any PPC-only software on an Intel Mac, and there is no third-party software to help. You will need to get upgrades for all of your software that's still around. For help with this check out: App Compatibility Table - RoaringApps.
Some have tried installing Snow Leopard into a virtual machine in order to do what you want. It is doable, but I doubt you will be happy with the results. Virtual Box is slower than molasses. Parallels would be the best choice. Still you wont see nearly the same performance or compatibility (not all old software works well in a VM.)

Similar Messages

  • I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

    After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery.  Any suggestions?

    Did you format the new HDD?  What is the status of the old HDD?
    Do you have an early or late 2011 MBP?
    Ciao.

  • I'm a new potential FCP X user.  Can I buy software to load onto my imac and macbook pro or is FCP X only available as a download?  I'd like to be able to edit on the road.

    I'm a new potential FCP X user.  Can I buy software to load onto my imac and macbook pro or is FCP X only available as a download?  I'd like to be able to edit on the road as well as at home.

    Here's a short tutorial video about how to move back and forth between your base computer and the on-the-go machine.  Very important info about which things can be copied within Finder and which things MUST be copied from within FCP X.  Best wishes.
    stephen
    http://library.creativecow.net/mcauliffe_kevin/FCPX-media-on-the-go/1

  • If I update from OS X 4.1 to OS X 6.8 will I be able to run software I was using on my defunct MacBook Pro running OS X 8?

    If I update from OS X 4.1 to OS X 6.8 will I be able to run various software I was using on my defunct MacBook Pro running OS X 8?

    It depends on whether or not the program supports 10.6.8. Some commercial software may need to be reinstalled from the original media/downloads.
    (119070)

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • I purchased the Adobe Photoshop Elements 10 about 6 months ago. I want to install it to my new computer which is a Macbook Pro with no CD Drive. How do I do this?

    I purchased the Adobe Photoshop Elements 10 about 6 months ago. I want to install it to my new computer which is a Macbook Pro with no CD Drive. How do I install it when I got it in CD form?

    I doubt the license is affecting the performance - it might be a case of the software being too old for the machine.
    In any case, you can contact Adobe support thru chat and have them reset your activation count to eliminatre your doubts regarding the license.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I can't download the new java update for my macbook pro. I get a corrupt file message. Help!

    I can't download the new java update for my macbook pro. I get a corrupt file message. Help!

    "The new java Version 7 Update 13 is not exactly helpful in macbook pro.
    try the version 11 or 12 they should work perfectly."
    The OP is running 10.6.8 so Java 6 is his option at this point.
    For the OP try here:
    http://support.apple.com/kb/DL1573

  • How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

    How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now.  Mail will no longer download on the MacBook Pro and keeps asking for my password.

    Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
    For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
    I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

  • Is it possible to add a new graphics card to my macbook pro 2011 13"

    Is it possible to add a new graphics card to my macbook pro 2011 13"?

    Hi W,
    Sorry, but no. It's soldered onto the logic board.

  • Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

    Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

    cwhargrave,
    have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
    If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

  • My motherboard died on hp laptop. i put my hard drive into an enclosure to access data. is it possible/how do i transfer my bookmarks from hard drive to my new computer which is a macbook pro?

    hello. my name is brandon. my hp laptop motherboard died 3 days ago. i have put my hard drive into an enclosure to be able to access all my info and files. i have successfully transferred all my files, but I am not sure if, or how i can access all my mozilla bookmarks from my my old hard drive to be able to put onto my new laptop, which is an macbook pro. my bookmarks were crucial to pay bills etc, so any help would be greatly appreciated, brandon

    Not familiar with the Mac file structure either but you can transfer the entire content of your Firefox profile replacing entire content of a firefox profile you created on new HD. For me copying over a few files was out of the question all of the files are updated and I wasn't about to reinstall 150+ extensions and set up configurations for everything and to do that for that 20 profiles and .ini file. Except for 3 most didn't have a lot of extensions but it would be rather impossible.
    I copied everything from the Mozilla folder down in the user libraries so all my profiles were set, it did something similar for application libraries.

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • Can I install iDVD (only) from an iLife 11 CD on a new (late 2011) on-line MacBook Pro/Lion purchase that no longer included it?

    Can I install iDVD (only) from an iLife 11 CD on a new (late 2011) on-line MacBook Pro/Lion purchase that no longer included it?

    Purchasing iLife 11 on disk is an easy thing to do. ILife 11 will include iDVD.
    If you have iDVD on another Macintosh you can transfer it to your new computer. That procedure has been discussed here many times, if you do a search you will find that procedure.

  • Where could I buy a new hard disk for my macbook pro 15''(MB986CH/A)

    Does anyone know where I could buy a new hard disk for my macbook pro 15''(MB986CH/A) (mid 2009)? The hard drives sold in Apple Store are not for macbook pro... Thanks a lot!

    At one time Apple use to put an Apple firmware on the drives installed into Mac computer. That is not the case anymore. And even if they did that firmware was just to indentify the drive as an Apple drive. Those same drives would work in any computer and any drive would work in a Mac computer. Same is true today. There are NO Apple Mac drives. Apple uses the exact same drives as any other computer.
    Apple uses the exact same hardware as all other computers. Same CPU, GPU, RAM, Drives, DVD drives you name it, it is the same as any PC.
    Good Luck but just because you go to a Mac-centric store doesn't mean it is any different then what you would buy some place else, other then it may cost more from one of those Mac-centric places.
    Joan_hk wrote:
    Thanks. According to my previous experience with an old white macbook, there might exist some compatibility problems for the hardware I bought from computer parts store...That's why I want to find an official retail store or reseller.... Thanks anyway!

  • Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

    Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

Maybe you are looking for