Running projector files on Microsofts Surface 2 SUR40 table
Hi!
I've been trying to get this working for a week now. I'm basically trying to get flash projector files to run through the SUR40's Launcher environment under SurfaceMode. On the regular desktop, everything works fine, I can open the exe without any issues.
Whenever I run it through ShellMode, SurfaceMode or SurfaceDebugMode, the Launcher tries to open the application, ACTUALLY OPENS IT, but doesn't display it correctly. When I'm in ShellMode (on the desktop), I can see the exe open in the background and on the taskbar. It seems as if the Surface Launcher can't tell whether or not the application has actually loaded or not. After 10 seconds, it times out and closes it.
As far as I can see in the AdminGuide for the table, "SignalApplicationLoadComplete" has something to do with it. But that's part of the Surface API...
Any ideas, tricks or whatnot?
UPDATE:
After a little more rummaging around, it is indeed ApplicationServices.SignalApplicationLoadComplete(); that's missing... The FlashPlayer.exe doesn't run this of course.
Hey,
thanks for reply...
hifi25nl wrote:I would check the cable and, if possible, I would connect the drive to a Windows computer and check with Samsung Magician and eventually I would update the firmware.
Good idea, I will try if I will be able.
But firmware is latest.
I haven't cable, I'm using SDD in laptop.
dice wrote:Did you try the extended smart self-test and see if this gives you any info?
I will try (in progress).
R00KIE wrote:You should check the output of mount to make sure trim is not being used.
No it, isn't.
BTW, I noticed some behavoiur: I updated system, kernel also was updated.
So I rebooted system, and then crash, home partition was not mounted.
So I tried manually, but ext4 module disappear.
I logged, and reinstalled linux package.
I called sync few times, reboot, and everything is ok.
Also (I'm not sure, but maybe) files are truncated or removed when system is suspended.
But I guess.
I will see in few days or more, maybe that is a sync problem.
Update:
Extended self-test is in progress, and my dolphin doesn't work.
Seg fault, I had that problem earlier...
This getting me really nervous...
Request for you:
Can you give me your smart value: "Total LBAs Written" for SSD disk?
Just for comparison.
Last edited by zx (2014-09-18 23:17:36)
Similar Messages
-
Auto run projector file from usb key
Hey guys
I was wondering if anyone has written an .inf file that will
automatically start a projector file when a usb key is inserted
into the usb port.
Thanksi am not sure if you mean a .swf file or the .exe standalone
file.
either way this should work. just replace the 'yourfile.exe'
with your exe/swf file. Hope this helps.
[autorun]
open=yourfile.exe
icon=yourfile.exe -
How Can I Print from my Microsoft Surface Running Windows 8 RT?
How Can I Print from my Microsoft Surface Running Windows 8 RT?
Most new wireless printers won’t have a problem printing from the Microsoft Surface with Windows 8 RT. All you should have to do for these printers is tell them to print and they will. Older wireless, Ethernet, and USB printers might not have an officially supported driver in Windows 8 RT, but there is a way to get the printers working. There are different requirements depending on how the printer is being connected to the Surface.
Note: All steps below are only for PhotoSmart, OfficeJet, DeskJet, and other HP Inkjet printers. These steps are not for Laserjet printers or printers from other manufacturers. These steps may not work for all Inkjet printers. If these steps don’t work, try different drivers from the list until you find one that will work (you’ll understand what I mean once you follow the steps below). If none of the drivers work, your printer will not work with the Surface.
For networked printers (wireless or Ethernet), all you need is either the Surface keyboard, or an external USB keyboard to connect to the Surface. This just makes anything you have to type easier to type. You will also need to have the Surface and the printer connected to the same network.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Below the Search Box, touch Settings.
In the search Box, type Devices and Printers.
Touch Devices and Printers.
Touch Add a Printer.
Touch “My printer is not listed”.
Select the TCP/IP option and touch Next.
Enter the printer’s IP address and touch Next. Note: You can get this from the printer’s Network Configuration Page, or from your router’s DHCP list.
The Surface will locate the printer and try to install it. The install will fail and the Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
For USB connected printers, you will need a USB cord to attach the printer to the computer.
Connect the printer to the computer via USB.
Windows will try to find the drivers but will not be able to.
Here Windows may ask you if you want to choose the driver to install. If it does skip to step 14 below.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Under the Search box, touch Settings.
In the Search box, type Device Manager.
Touch Device Manager.
Touch View and select Show Hidden.
Search for the printer in the Device Manager. It should be under Other Devices with a yellow caution sign beside it.
Select the printer from the list.
Touch Action.
Touch Update Driver, or Install whichever one it displays.
The Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support -
Hi!
I have purchased a Microsoft Surface PRO 3. One main reason for the purchase is to sign pdf´s with the Surface-pen on the screen, save the file and avoid paper-printing the documents. Problem is however that the signature doesnt become a solid part of the document when saving it. This makes the signatures randomly not visible on some apple-produkcts, some printers etc.
I use only a free-download-version of the Adobe reader.My question is if a pro-version allow me to save the documents with the electronic signatures as a fixed part of the document - like the rest of the pdf-content?
Regards Trygve WedsetHi vward26,
You can use Acrobat to make only part of a PDF document editable.
Kindly refer this FAQ:http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-convert-just-part-of-a-pdf-file/
Regards,
Florence -
I cannot show my video files on microsoft office program with macair book 11 inc notebook while using projector
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Installing Creative Design Suite Standard on Microsoft Surface Pro 3
I am trying to install the Creative Design Suite on a Microsoft Surface Pro 3 from a DVD (I recently changed computers and need to transfer my programs to the new machine. From my research assumed the Surface would work well for my needs and allow me to dabble in Illustrator and Photoshop as I learn the programs). I am using an external optical drive however the single USB port on the Surface does not seem to get enough power to run the full installation. I can get the installation started and go so far as to put my in my serial number and then it stops working. At one point I was even given the notice that it appears my software is counterfeit - which it is not. I legally purchased it and have used the same disk on another machine. Is there a way to install the software that would allow me to bypass the usb port/optical drive situation? One solution I read was to use the disk to transfer the program files to another machine, put them on a jump drive and then run installation on the surface through that - but I don't think I can do that with the serial number situation. Has anyone else encountered this problem? Ideas?
-I know the smart thing to do would be to upgrade to the cloud, however at this time I am not proficient enough in the programs that I want to pay $20-30 a month for the programs I am trying to learn. The disk software I currently own is for CS6 and was purchased just before Adobe started using the cloud feature for their programs.What issue do you have with downloading the installation files?
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
Photoshop CS6 Brush pressure sensitivity not working on the Microsoft Surface Pro.
I have just purchased a Microsoft Surface Pro in anticipation of running Photoshop on it. I installed Photoshop and tried to do some sketches. I created a new file and started sketching. I Immediately felt like something was wrong. I checked my brush settings and saw the pressure sensitivity was not available. Everytine I tried to turn it on it was marked with an exclamation point.
Does anybody know if Adobe is supporting the new pressure sensitive pen from microsoft, or if there is some sort of setting that I am missing? I have tried sketchbook pro 2011, and that works amazingly well with the pen. I hope someone can help me along here, because if this tablet can truely run photoshop, it would be a Game Changer.Just curious.... has any of you tried the shape dynamics in photoshop and turning on pen pressure?
and in illustrator to modify the size to pressure and variation to maximum? (and of course select that brush preset that you just modified and draw with it using SHIFT+B for blob brush or B for regular brush)
I am also interested in purchasing a Surface pro so please report if this helps.
what I recently discovered in other forums is that Sketchbook Pro works flawlessly in desktop mode. Sketchbook Express in the APP mode doesn't support pressure yet.
there is no official confirmation that the surface pro uses a wacom digitizer, however a few artist friends of mine have gone to the microsoft store... brought their own wacom pens (cintiq 15x pen - older models that works with general tabletpcs) and the pro recognized it. which means that it is a wacom digitizer. it wouldn't make sense if a wacom pen works with a different digitizer board like N-trig.
also read in another forum about adobe using wintab and windows 8 wintab drivers are not there yet.
anyway... I'd be glad to know if this works or not
thanks! -
Enough RAM to run large files on word?
I have:
MacBook2,1
Intel Core 2 Duo, 2.16 GHz, L2-buffer 4 MB, Memory/RAM, 2 GB, Busspeed: 667 MHz.
I work with a microsoft word file with the size 1.4 MB, it is about 70 pages, with some tables, with about 18 advanced figures (e.g. graph plotter 3D).
Sometimes it crashes down with now warning, other times there is a message about not enough memory.
But should it be possible or not to run a file of that size with 2 GB? The question is whether it is a hardware problem or not?
(I have tried all the stuff about moving *.plist files and to copy in a new document and have word 2007 on windows to repair it, even microsoft got my document, but they could not fix it).One rule of thumb is that if any application program complains about not enough memory, it is never about memory. An "out of memory" error usually means some internal logic error in the software, that's all.
What version of Word are you using? I had no problem editing my wife's 400 page dissertation in Word 2004. You might try converting those "advanced figures" to static images. -
How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?
I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
Put the Data Flow Task within the Foreach Loop Container
Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
And that's when I run into trouble...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
Thanks for your review and am hoping and praying for a reply and solution.Hi ITBobbyP,
If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
If in this scenario, please refer to the following tips:
The Foreach Loop container should be configured as shown below:
Enumerator: Foreach ADO.NET Schema Rowset Enumerator
Connection String: The OLE DB Connection String for the excel file.
Schema: Tables.
In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
The connection string for Excel Connection Manager is the original one, we needn’t make any change.
Change Table Name or View name to the variable Sheet_Name.
If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to Insert data from an XML file into an Oracle 10g table
Hello,
Please can you help me as I have hit a brick wall with this problem.
We are running version 10g Oracle and we will start receiving XML files with employee data that needs loading into a table, this is the XML file:
<?xml version="1.0"?>
<RECRUITS>
<RECRUIT>
<FIRST_NAME>Gordon</FIRST_NAME>
<LAST_NAME>Brown</LAST_NAME>
<SHORT_NAME>GORDONBROWN</SHORT_NAME>
<APP_NO>00002</APP_NO>
<STATUS>M</STATUS>
<DATE_FROM>21-JUL-2006</DATE_FROM>
<RESOURCE_TYPE>P</RESOURCE_TYPE>
<TITLE>Mr</TITLE>
<DATE_OF_BIRTH>28-DEC-1983</DATE_OF_BIRTH>
<SOCIAL_SEC>AB128456A</SOCIAL_SEC>
<PARTTIME_PCT>1</PARTTIME_PCT>
<SEX>M</SEX>
<ADDRESS_TYPE>1</ADDRESS_TYPE>
<ADDRESS>A HOUSE SOMEWHERE HERE</ADDRESS>
<ZIP_CODE>PE3 LLL</ZIP_CODE>
<PLACE>BOROUGH</PLACE>
<COUNTRY_CODE>UK</COUNTRY_CODE>
<PROVINCE>UK</PROVINCE>
<EMAIL>[email protected]</EMAIL>
</RECRUIT>
(FYI - there may be more than 1 employee in each file so all of the above will be repeated X amount of times)
</RECRUITS>
To make things simple we have created a table which mirrors the XML file completely to load the data into, the SQL i have used is thus:
CREATE TABLE RECRUITMENT
FIRST_NAME VARCHAR2(30),
LAST_NAME VARCHAR2(30),
SHORT_NAME VARCHAR2(30),
APP_NO NUMBER,
STATUS VARCHAR2(1),
DATE_FROM DATE,
RESOURCE_TYPE VARCHAR2(1),
TITLE VARCHAR2(4),
DATE_OF_BIRTH DATE,
SOCIAL_SEC VARCHAR2(9),
PARTTIME_PCT NUMBER,
SEX VARCHAR2(1),
ADDRESS_TYPE VARCHAR2(1),
ADDRESS VARCHAR2(30),
ZIP_CODE VARCHAR2(8),
PLACE VARCHAR2(10),
PROVINCE VARCHAR2(3),
EMAIL VARCHAR2(20)
Every method we try from the numerous documents and so called "user guides" have failed, please can somebody show me the PL/SQL i need to get this files data into the above table?
We need to be able to do this purely through SQL*PLUS as we hope - if we ever get it working manually to create a procuedure that will encapsulate everything so it can be run over and over again.
The XML file is sitting in the XMLDIR and is called REC.XML.
Please help : (Hi, I have got some material for inserting data into oracle table from xml file, this might help you.
Create XML Document Table
create table XML_DOCUMENT_TABLE
FILENAME varchar2(64),
XML_DOCUMENT XMLTYPE
(This will be as per your record details).
Inserting record to Oracle Table
declare
XML_TEXT CLOB := '<smsnotification>
<messageid> 256427844 </messageid>
<protocolid> CO0NPS2KHQ </protocolid>
<notifiedon> 1156123007416 </notifiedon>
<status> 3PBI: Invalid </status>
<additionalinfo> Customer account not active </additionalinfo>
<carrierid> 1175 </carrierid>
</smsnotification>';
begin
insert into XML_DOCUMENT_TABLE values ('Receipt.xml',XMLTYPE(XML_TEXT));
end;
Select Statement
select extractValue(XML_DOCUMENT,'/smsnotification/messageid') Messageid,
extractValue(XML_DOCUMENT,'/smsnotification/status') Status,
extractValue(XML_DOCUMENT,'/smsnotification/carrierid') CarrierID
from XML_DOCUMENT_TABLE; -
I have Adobe Acrobat 6.0 Pro how do i get it to work on my microsoft surface 3
I have Adobe Acrobat 6.0 Pro how do i get it to work on my microsoft surface 3
Hello nnicora19a,
I am sorry but Acrobat 6 is not compatible to run on Microsoft Surface 3.
Moreover, Acrobat 6 is a very old version so Adobe also recommends you to install and use latest version (Acrobat XI) which is more compatible with OS on Microsoft Surface 3.
Regards,
Anubha -
How to view pst file without Microsoft Outlook?
How to view pst file without Microsoft Outlook? Please suggest viewer for content of corrupted PST files.
Hi,
If the .pst file is corrupted, I suggest you run Scanpst.exe to repair it:
http://support.microsoft.com/kb/272227
If you need to view .pst file without Outlook, we may use some 3rd-party tools, there are a lot on Internet.
Regards,
Melon Chen
TechNet Community Support -
.exe projector file for PC works fine, but extracted .hqx for Mac won't open when on CD
I'm using Flash MX, AS 2, Projector 6, working on a PC.
I saved two versions of my project -- one .exe for Windows and one .hqx for Mac. The .exe works fine when burned onto a CD. When opening the .hqx from a CD on a Mac, I got a message that the file is on a locked volume. I discovered that the reason for this is that an .hqx is essentially a zipped file which has to be extracted, and when a file is extracted, the unzipped files are written onto the same location as the original. When the original files are on a CD, Stuffit (Mac's zip extractor program) can't write onto that location.
[So if anyone at Adobe looks at these forum posts, let me say that I think its absolutely ridiculous that the Mac version of Flash's projector files have to be extracted in order to be viewed!]
To get around this problem, I saved the .hqx on my PC, put it on a portable hard drive and brought it over to a Mac (because Stuffit for PC converts it into an .exe for PC), and unzipped it. When I'd test it on the portable hard drive or on a USB drive, the extracted file would work. When I'd bring it back over to the PC and burn a CD with both versions on it, and then test that CD on the Mac, it wouldn't work. Can anyone tell me why the extracted Mac version works on a hard drive, but not on a CD? What do I have to do in order to make a Mac projector file work from a CD?Windows uses the FAT file system, Macs use the HFS file system. The two are not compatible. If you save a Mac projector file on a FAT file system, it won't be saved properly and it won't work. When you create a Mac projector from a Windows version of Flash, the file will be saved as a compressed .hqx file.
Since you need to use a Mac to create a hybrid CD, when you move that .hqx file to the Mac, unstuff it and then use the resulting file for the CD. It will then run from the CD as expected. -
How to use GUI_upload for Uploading a CSV file in Microsoft Excel.
Hi Guys,
can anybody tell me how to Upload the CSV format file in Microsoft excel sheet?
Thanks,
Gopi.Hi Gopi,
u can use GUI_UPLOAD, TEXT_CONVERT_XLS_TO_SAP.
Please check these codes.
Uploading data from CSV file format into internal table using GUI_UPLOAD
REPORT zupload MESSAGE-ID bd.
DATA: w_tab TYPE ZTEST.
DATA: i_tab TYPE STANDARD TABLE OF ZTEST.
DATA: v_subrc(2),
v_recswritten(6).
PARAMETERS: p_file(80)
DEFAULT 'C:\Temp\ZTEST.TXT'.
DATA: filename TYPE string,
w_ans(1) TYPE c.
filename = p_file.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Upload Confirmation'
* DIAGNOSE_OBJECT = ' '
text_question = p_file
text_button_1 = 'Yes'(001)
* ICON_BUTTON_1 = ' '
text_button_2 = 'No'(002)
* ICON_BUTTON_2 = ' '
default_button = '2'
* DISPLAY_CANCEL_BUTTON = 'X'
* USERDEFINED_F1_HELP = ' '
* START_COLUMN = 25
* START_ROW = 6
* POPUP_TYPE =
* IV_QUICKINFO_BUTTON_1 = ' '
* IV_QUICKINFO_BUTTON_2 = ' '
IMPORTING
answer = w_ans
* TABLES
* PARAMETER =
* EXCEPTIONS
* TEXT_NOT_FOUND = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHECK w_ans = 1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = filename
* FILETYPE = 'ASC
has_field_separator = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
data_tab = i_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
* SYST FIELDS ARE NOT SET BY THIS FUNCTION SO DISPLAY THE ERROR CODE *
IF sy-subrc <> 0.
v_subrc = sy-subrc.
MESSAGE e899 WITH 'File Open Error' v_subrc.
ENDIF.
INSERT ZTEST FROM TABLE i_tab.
COMMIT WORK AND WAIT.
MESSAGE i899 WITH sy-dbcnt 'Records Written to ZTEST'.
Uploading data from Excel file format into internal table using TEXT_CONVERT_XLS_TO_SAP
REPORT zupload_excel_to_itab.
TYPE-POOLS: truxs.
PARAMETERS: p_file TYPE rlgrap-filename.
TYPES: BEGIN OF t_datatab,
col1(30) TYPE c,
col2(30) TYPE c,
col3(30) TYPE c,
END OF t_datatab.
DATA: it_datatab type standard table of t_datatab,
wa_datatab type t_datatab.
DATA: it_raw TYPE truxs_t_text_data.
* At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
*START-OF-SELECTION.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = p_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/ wa_datatab-col1,
wa_datatab-col2,
wa_datatab-col3.
ENDLOOP.
reward if helpful
raam
Maybe you are looking for
-
After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I h
-
i have a broken desktop which had my itunes account on it. I am trying to get the information onto a new laptop and itunes programme but cannot. I have only managed to copy over some of my music as i had it on an external drive. I also cannot get my
-
Bad performance with PreparedStatement
Hi, I have a query that returns about 10.000 results on which I have to iterate. The query is something like that : SELECT col1,col2 FROM myTable INNER JOIN myTable2 using(id) WHERE time > TO_DATE('15/06/2009 16:28:00','DD/MM/YY HH24:MI:SS') AND time
-
External Hard Drive "partial" crash?
Ive been using a 500 gb GDrive mini triple for about 6 months now to store all of my data for school and it has been great, until now. I dont kow exactly what happened, but now "most" of my files are corrupt (the important ones conveniently). I had p
-
LMS 4.2.2 CLI TEMPLATE CREATION
Is there a way to apply the template based on the response of the IOS CLI? Example: Var1 = "show dot1x" if var1 = disabled then dot1x system-auth-control end if Thanks Emiliano