Running PSE 11 on Mac 10.8.3 but get Online Services could not be initialized, please reinstall.
Running PSE 11 on Mac 10.8.3 but get Online Services could not be initialized, please reinstall. Have reinstalled but get same message. Organizer WILL open but I'm wondering what I can do to fix this?
Where are you getting this message? In the organizer, the editor, or the welcome screen? If in the organizer, try going to the preferences>partner services and clicking the Refresh button.
If from the welcome screen, launch the editor from the applications folder and make a dock icon for that, and skip the welcome entirely. The visible file in applications>Adobe Photoshop Elements 11 is not the editor. You want this one:
The one at the top level is an alias for the welcome screen, which is best avoided.
Similar Messages
-
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Having difficulty connecting my Ipad to FaceTime and messages. I've updated the latest software and have WI-FI/3G coverage but it keeps saying: "could not sign in, please check your network connection." Can anyone help?
Have you tried a reset? Hold down the home button along with the sleep/wake button until you see the apple, then let go.
-
help me!
iPhone 4 and iPod touch (4th generation): Using FaceTime
http://support.apple.com/kb/HT4319
iPhone 4 and iPod touch (4th generation): Using FaceTime behind a firewall
http://support.apple.com/kb/HT4245 -
My Mac Book Pro is 2 yrs old and did not come with Facetime. Will it run on my Mac and where do I get it?
See Here for
Using FaceTime
http://support.apple.com/kb/ht4319 -
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key. -
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
SatishHi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
i have an imac and when i load up facetime and login it says "could not sign in. please check your connection and try again later" but my WIFI is fine? please help???? i have an early 2006 imac (intel core duo) running snow leopard (10.6.8) and it says on app store you need 10.6.6 or later? please help??
try to activate it, then LEAVE IT ALONE FOR 24 HOURS!
either that or restore it from an icloud back up. that seems to be working pretty well for a lot of ppl -
I just bought and installed Adobe Acrobat XI Pro, but when I open it, or access a PDF file, I get the error message "Serial Number you provided is valid, but a qualifying product could not be found on this computer."
The list of products on the drop down list that comes with this message includes Adobe Acrobat XI Standard and Adobe Acrobat X Pro Macintosh, but doesn't include Adobe Pro XI for Windows. Selecting either of those, and using my serial number, fails, of course. As a result, I can't run my newly purchased program, or access any PDFs.
Please tell me what to do.
Chuck Poland
[email protected]Chuck you have placed Order for Acrobat Upgrade if you don't have any previous version of Acrobat than you need to cancel this order and need to buy a full version.
-
I have a PC with windows 7 installed. Acrobat X reader and Acrobat XI Pro trial version run fine. I have purchased Acrobat XI Standard and there is a serial number in my account. Acrobat XI Standard installs fine but I receive the error message after putting my serial number in, "Serial number you provided is valid, but a qualifying product could not be found on this computer."
The message identifies that you have purchased an upgrade version of the applications and it is asking you to identify the previous version of that application that you are upgrading from and then to provide its serial number.
If you did not intend to purchase an upgrade version then you probably need to cancel that and purchase it at full price. -
I've been using Mac OS X 10.6.4. I want to install printer driver of Brother DCP -7030 .I tried it online I could not do it. Would you help me providing suggestions. It would be great help.
Dinesh from NepalMac OS X 10.6.8 is the current incarnation of Snow Leopard, and fixes various issues in earlier releases.
Current versions of Mac OS X 10.6 include the necessary printer driver for the Brother DCP-7030 printer (HT3669). (The asterisk footnote on that printer indicates there was a recent update via Software Update, so get to current 10.6.8 and ensure the Brother printer software update has been selected and loaded.)
If you're on the current Mac OS X version and if have the Brother update loaded (from Apple) and if problems with the printer persist, then remove the printer from your current Mac OS X configuraton, and re-add it, and see if that clears the particular issue(s) you're having with this printer.
From experience, the Brother software for Mac OS X is a little odd, and the older software stuff (and particularly around the scanner controls for their multi-function series) were, um, unusual, and a little unstable. Printing generally worked fine, though. Recent versions of the Brother software are working better including for the scaller, but the UIs and the set-up are both still odd. If you're using the box as a printer (I haven't looked at the DCP-7030 features), then you're best using the Brother software that arrives from Apple and not the software from Brother.
Also ensure the printer firmware is current. That's corrected some odd behavior on some Brother printers. -
Trying to make a iPhoto Library on my external hard drive but I get "the library could not be opened because the file system of the library's volume is unsupported." I reformatted my hard drive to ExFAT because I want to be able to use it on PC and MAC.
iOS: 10.10.1
Mac Book Air
External: WD 500 GB recently reformatted (no files on it currently)The iPhoto library must only be on a volume formatted Mac OS extended (journaled) - it can not be on any other format drive
LN -
"The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again"this kind of error massage i found but there are no other copies of Firefox running on my computer.So please solve my prob.I can not uninstall this because i have saved important bookmark on my system.When i start my Firefox that time browser is opening few times later may be it's my internet slow connection but everyone has slow connection internet they are not having this prob then why should i have this prob.Why it is taking little bit time to open?after that update prob when i installed the update file.
Firefox [[Safe mode]] is a diagnostic mode that allows troubleshooting.<br />
You start the same version, only some features are disable like add-ons (Tools > Add-ons > Extensions).
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\updates
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Maybe you are looking for
-
ITunes 10 - Crashes when importing CD or from RIP'd file/folder
Windows Vista. There is no error, iTunes stops working and Microsoft Windows Message pops-up ITunes has stopped working A problems caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
-
Mac OS 9 is no longer recognized!!
Hello everyone! This is something that I have never heard of before and have not found a solution on various discussion pages. I have decided to purchase myself an iMac G5 and pass my Indigo iMac G3 onto my son. I also decided to "renew" the machine
-
I used to be able to sync my Outlook calendar with my Iphone calendar, but the last few times I tried it did not sync. Help!
-
Hi All . i just embeded a java bean into oracle forms it appear succesfully on the canvas now i want to execute the following function but unable to do so. Can u please explain me what i have to type where requested to call following function. FUNCTI
-
Can you delete old back-up files?
There tens of thousands of files in my iPhone backup area (Library>Application Support>Mobile Sync>Backup), most with old dates from previous back-ups. It doesn't appear that the backup process overwrites the old files. Can I delete these old dated b