Running Repair Disc Permissions

When running Repair Disc Permissions in Safe Mode I get dozens of lines saying : Permissions Differ on Library/Printers/Epson......... and the next line will say: Repaired "Library/Printers?Epson....... then on to the next line and on and on. It says the permissions are repaired but if I run another Permission Repair immediately, the same Details show and are repeated each time. Most of the lines refer to Epson Printers but not all. They are all Library permissions. I do not have an Epson printer and I have never had an Epson printer hooked up? Why do these seem to not get repaired even though it easy they are?

I'm here because I'm seeing this same thing (along with "Warning: SUID file....has been modified and will not be repaired").
Lately I have begun to experience some annoying performance issues with my (late 2013) MBP that I have not had before (freezes-up, slower-than-usual operation, etc.). I'm running Disc Utility more often and nothing seems to help.
Is there anything more that I can do; any other diagnostic software that I can install to see what might be going on? At one point, I had very little hard-disc space free, so I've deleted a bunch of stuff and now have more than enough free space. I'd hoped this would take care of the problems, but it's still acting up.
It figures that just when I've been bragging about how great my MBP is - how I never have trouble with it - and have been doing my best to talk my husband and a friend of ours into replacing their old, worn-out PCs with MBPs, I start having trouble with mine.
Almost as if it's trying to tell me something???
Thanks!

Similar Messages

  • An old macbook running 10.6.8 was restored using Time Machine then Snow Leopard was reinstalled and updated to 10.6.8. Now the machine is slow and repair disc permissions results in a cancelled by user message.

    Our old macbook was getting a gray screen with flashing ? on bootup. Eventually I restored it using Time Machine then decided to reinstall Snow Leopard since it would not boot. Machine now boots but is slow. Ran repair disc and tried to run repair disc permissions but got a message that it was cancelled by user.
    This machine is at least 6 years old and I just want to limp it along until I can afford to replace it in the spring.

    You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS.  I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before.  I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure.  Was the computer ever in a smoky environment??

  • Repair Disc Permissions must run before I can open apps

    Hi- I've been having a recurring problem over the last week: that an application suddenly won't open. After I've been to Disc Utility and run Repair Disc Permissions, it opens again....... and then perhaps a few hours later I have exactly the same problem and go through the same procedure !
    Something must be wrong .................... but what ?
    I've been surfing and looked at various apps for System Maintenenance and then found an extensive article in this forum which explained that normally, no extra maintenance is necessary.
    So now I'm confused. And help to clarify matters would be much appreciated !
    SeaDream

    Wow- that was interesting reading ! Yes- I've been using Mozy for about a year, and a couple of days ago, noticed that the icon had disapeared. As I installed SuperDuper last week, I'll unclick it !
    Thanks for the tip, Kay.

  • Repair disc permissions always finds files to repair

    I've been repeatedly running repair disc permissions via disc utility, as my MacBook Pro has become extremely slow. Every time I run the repair button the program will find 'problem' files to repair.
    When I select the verify options it will not find conflicts.
    Will there always be conflicts the program finds?
    Incidentally, the slowness started when I upgraded to 10.5.x. And my new (aftermarket) battery gets extremely hot and won't hold a charge for long (despite priming numerous times).

    Hi,
    according to this http://support.apple.com/kb/TS1448 they will be always there and can safely be ignored.
    Regards
    Stefan

  • Not repairing Disc permissions

    When I run Disc Utility, select the HD listed and run "repair disc permission" it goes through the process and list all the errors and repairs. When I go back and run it again, all the errors and repairs happen all over again, I shut down, restart and run " repair disc permissions" again and the errors and repairs are still there. I do not have a OS-X 10.6 disc to run "repair disc"
    Any idea why are these errors are not repaired? I have not had a problem repairing permissions until lately.
    Thanks
    Ron

    Hi Ron
    WZZZ is correct, nothing to worry about....
    See > http://support.apple.com/kb/TS1448?
    Dennis

  • Screen saver does not turn on. Have run the disc utility to repair disc permissions. Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

    screen saver does not turn on. Have run the disc utility to repair disc permissions. Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
    I am running 10.9.1 software
    Help Diggs1936

    I would try reinstalling.
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Repairing Disc Permissions Errors Every Time

    Every time I repair disc permissions I get this result no matter how many times in a row I do this or if I do it weekly or monthly it is the same errors that show.
    2011-03-21 21:04:59 -0500: Disk Utility started.
    2011-03-21 21:05:06 -0500: Repairing permissions for “Macintosh HD”
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
    2011-03-21 21:06:42 -0500: User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
    2011-03-21 21:06:42 -0500: User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
    2011-03-21 21:06:42 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
    2011-03-21 21:06:42 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
    2011-03-21 21:06:43 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:43 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
    2011-03-21 21:06:43 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    2011-03-21 21:06:43 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
    2011-03-21 21:06:43 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:43 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts".
    2011-03-21 21:06:43 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-03-21 21:06:43 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar".
    2011-03-21 21:06:43 -0500: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    2011-03-21 21:06:43 -0500: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib".
    2011-03-21 21:07:11 -0500: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    2011-03-21 21:07:41 -0500:
    2011-03-21 21:07:41 -0500: Permissions repair complete
    2011-03-21 21:07:41 -0500:
    2011-03-21 21:07:41 -0500:

    Yes, those are to be expected. They are merely notifactions.
    RP is a one and done thing. Running it multiple passes with change nothing.
    http://support.apple.com/kb/ts1448
    -mj
    Message was edited by: macjack

  • Repairing disc permissions

    I frequently repair disc permissions on my three apple computers running the latest updated version of Tiger. Today, when I went to repair permissions on each computer, I noticed a large amount of permission repairs, and all the
    same ones on all three computers. After the repairs were made, and I ran permission repairs again, all the same problems showed up gain. Usually, one sees a clean slate when running repairs after it has just been done. This has occured on all three computers. I have never seen this before. I have have a G5 dual tower, a G4 powerbook 12", and a G4 powermac tower. Any ideas???
    THanks

    What you are seeing is normal and nothing to concern yourself with. You will see thesame messages each time you run the disk permissions utility. I used to have a link to an explanation of this but with the forum changes I can't seem to locate it. The bottom line is that it is nothing to worry about, it is just informational and not an indication of a problem,

  • When run repair disk permissions?

    I am going to upgrade from Snow Leopard to Mountain Lion.
    I have heard/read that you're supposed to run repair disk permissions beforehand. 
    1.  Should I run repair disk permissions on my brand new backup disk (am planning to backup Snow Leopard and all apps and docs before upgrading to Mountain Lion - - so can restore Snow Leopard etc. if want/need to)?  If so, do I run repair disk permissions on the new backup disk before or after I partition the backup disk [am planning to have two sections, one with all the Snow Leopard stuff, and one for iMac backups that will be made after have upgraded to Mountain Lion])
    2.  When's the best time to run repair disk permissions on my iMac - - before I download Mountain Lion or right before I do the installation of Mountain Lion?
    Thanks.

    It's not a requirement, but it may help especially if you don't attend to the state of your running OS. I recommend doing this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Then you can proceed to click on the Install button after the upgrade finishes downloading. I also suggest you make a bootable backup of your current Snow Leopard system on an external drive just in case things go badly.

  • Corrupt Boot disc - how do I boot from OSX disc to run Repair Disc?

    I have just run Verify Disc and it has identified problems which requires me to boot from my OSX disc and run Repair disc.
    I think I do this by switching on while holding down C....is that right?
    ALSO I can only find my Leopard boot discs and I am currently running Snow Leopard....do I NEED to use the Snow Leopard discs to boot up?
    Thanks in advanced....worried!

    Unfortunate that your HD and Time Capsule are playing up at the same time, to say the least.
    Hopefully your data will be salvageable, and there are several software options to try, here's a couple:
    free (I think) http://www.macupdate.com/app/mac/35373/disk-drill
    and paid for http://download.cnet.com/Data-Rescue/3000-2094_4-211375.html
    I've not used either, but the paid for app may look pricey but it seems highly recommended byt those that have used it.
    Have you tried re-booting the Time Capsule - still seems hard to believe that's gone down as well. Good luck.

  • Since yesterday all my usual .xls files will not open (Office for Mac 2011). Can open .xlxs files. Default 'open with' is Microsoft Excel.app. No software updates done. Have repaired disc permissions. What next?

    Since yesterday all my usual .xls files will not open (Office for Mac 2011). CAN open .xlxs files. Default 'open with' is Microsoft Excel.app. No software updates done yesterday or the day before (or maybe a Silverlight or an Acrobat one by accident?). Have repaired disc permissions. HHD name is still same as it always was. What next? Thanks
    PS I'm not a great techie so assume I don't know what you're talking about!

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out.  I can't change tags for almost all my audiobooks.  Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes11.4

    I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out.  I can't change tags for almost all my audiobooks.  Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes 11.4  I don't have iTunes Match.

    Select all the songs and then Advanced -> Convert ID3 tags.
    http://docs.info.apple.com/article.html?path=iTunesWin/6.0/en/655win.html

  • Running "Repair Disk Permissions"

    I recently brought my imac into the apple store to resolve a noise issue. The mac genius recommended I first back up all my data (which I have now done) and run "Repair Disk Permissions". I did that and the message I got after it finished was "ACL found but not expected on Applications/Utilities"
    "ACL found but not expected on Applications"
    "ACL found but not expected on Library"
    What does that mean? Any steps I need to take at this point?

    Search the forums for ACL, sort by date, and review the many posts on the subject, then see http://docs.info.apple.com/article.html?artnum=306925

  • Repairing Disc Permissions gets stuck

    Hi, I have only just started using 'Repair disk permissions' recently not being aware that I needed to do that after downloading upgrades of programs. I've tried running it on my hard drive a few times and it gets stuck each time. I have to force it to stop, which then asks me for my system password, but it then says 'Permissions Repair Complete'. I've even left it running for over an hour and the same thing happened. Has it worked? Why do I need to cancel it to get it to stop?

    Do you have the install discs (or Tiger discs, if your computer didn't come with Tiger) for the machine? If so, try doing repair permissions from the disc to see if that works OK.
    ~Lyssa

  • Every time I use Repair Disc Permissions under Disc Utility, I get the following message: Permissions differ on "System/Library/MonitorPanels/Profile.monitorPanel"; should be drwxr-xr-x ; they are lrwxr-xr-x .

    Can anyone explain this?  Every single time I use Disk Utility to repair disk permissions, I get the same messages, not just for Monitor Panels, but for every single item in the Library!!!, and this wastes a lot of time because once the permissions have been repaired, I find that the messages come up again immediately, suggesting that the repairs were not made!!  The messages always read as follows: should be drwxr-xr-x ; they are lrwxr-xr-x .
    What is going on here, and how can I fix it permanently?

    The structure of those packages changed in an update. There's nothing to fix.
    The repair permissions function should only be used when troubleshooting an issue, and then only once per incident. Running it repeatedly won't fix anything.
    (93748)

Maybe you are looking for