Running replicat on a separate server from the target DB

The DBA in charge of the target database of OGG replication doesn't want OGG running on his database server. He is proposing that the replicat process run on a separate server and post to the target DB across the network.
This would require Oracle on the intermediate server on which replicat is running.
My question is, can this be done? Can you have replicat writing to a database that is on a different server?
If it is possible, what are the potential issues with this arrangement?
Thanks in advance for your help.

Based on what you've provided, you need a new/better DBA. The overhead is negligible.
Nonetheless, assuming all other financial restrictions/limitations related to licensing are not an issue, Replicat can run on an intermediate server. Just needs to collect the trails and apply the SQL.

Similar Messages

Installing APEX on separate server from production database

I have a security request to install APEX on a separate server from the application content. I have searched terms I know and have only found vague references, but not meaningful assistance. Rather than try to talk me into installing on the same server, can someone point me to some documentation for achieving this without the use of database links which is another security risk? The APEX Listener and APEX instance can be installed on one server but the application content needs to be installed on a separate server.
Edited by: user4552785 on Apr 16, 2012 12:18 PM

You can easily set up an Oracle HTTP Server elsewhere to connect to your APEX instance (along with images directory and other static files). However, the application schema is tightly embedded in the same instance as the APEX schema, so that will have to stay there.
What security concerns are you trying to alleviate? By default, APEX applications run as the user APEX_PUBLIC_USER and then this user masquerades as your application schema (and occasionally a little bit of APEX_0XXXXX). Even if you could manage to move your application schema to another instance, you haven't achieved a whole lot from a security standpoint.

Is there any way to run the datasocket server from the vi

I want to run the datasocket server from the LabVIEW program and is there any command to do this. Because, I built one application vi and this vi is link with another vi using datasocket.So every time before i run the program, i need to run the data socket server. So if i forget to run the datasocket server, I need to restart my vi. So what I want to do is I want to run the data socket server, when i open this VI. So that I do not forget. Thanks.
Saw.

In the examples\comm folder there is a file called datasktxwin.llb In that library open e.g. DS 3D Graph Writer...launch it and you will see that it launches the data socket server. Take a look at the code and you'll find a VI that launches the server; "Launch DS server if Local URL.vi".
If you know the path to the server executable you can always launch it using the System Exec.vi from the communication palette too. The typical command line would then be:
C:\Program Files\National Instruments\DataSocket\cwdss.exe
MTO

HT202279 Choose your server from the list that appears

I administer four Yosemites servers using OS X Server.
Everytime I launch OS X Server I have to option to Continue, which I do not choose. But I never get a list of other Macs to Adminsiter. I always have to choose "Other Mac" and enter the URL, etc. This happens on two Macs running Yosemite and being used for administrating.
Where is the list of other Macs? No matter how often I connect to them, they never show up and I can find nothing in the menus to add them.
According to How to administer OS X Server remotely using Server App - Apple Support it should be there:
The first time you open the Server app on your admin computer, do not click the Continue button in the "Welcome to Server" window. Instead, choose Connect to Server from the Manage menu.
Choose your server from the list that appears, or click "Other Mac" and then click Continue.

I should've noted that these are web servers in various locations. They would not show on Bonjour.
I'd still expect Server to remember and list them, and certainly the documentation doesn't indicate it's a LAN only feature.

Starting a WSAD server from the command prompt and not from the IDE UI

Hi,
is there a way to run the WSAD server from the command prompt instead of using the IDE UI . i have tried starting the server from the Directory i have installed WSAD " D:\Program Files\IBM\WebsphereStudio\runtimes\base_v5\bin>startServer.bat" but it gives the Following error " The system cannot find the path specified." i am working . do i have to specify the workspace that i am currently working on

to see if the network adapter has registered with OPMN run: opmnctl status
the 6200 message is a timeout which can be set in opmn.xml, the reports server(s) and other processes managed by OPMN should still stop.
Try opmnctl stopall or opmnctl shutdown
Does the timeout shows up regularly ie can you repeat it?
After the stopall or shutdown try to start everything up again and try to stop the single reports server process again.

[SOLVED] Can't access my home server from the outside

Hi all,
I have installed Arch on a Raspberry Pi and am trying to set up a home server. Right now, I am running a simple HTTP server (using node.js, if that matters) on port 8080. From my LAN, I can access the server all right.
From the outside, it seems that the traffic does actually reach the computer (I conclude this from the blinking diode indicating network traffic). However, all requests time out. Interestingly, if I kill the server while a request is pending, the timeout occurs right away.
I have no idea what is causing this. I have checked for iptables rules, but there seem to be none. What is blocking the traffic and how can I find out?
EDIT: Nevermind, I was testing incorrectly -- the traffic did reach the Raspberry Pi, but the return traffic did not reach my test computer because it was blocked by the router's firewall. Testing from TOR works just fine.
Last edited by MrAllan (2013-12-24 12:01:42)

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

How to mount a sharepoint server from the finder

Can anyone help me with how to mount a microsoft sharepoint services server from the finder. I need to do this because I want to use the collaboration features in Acrobat 8. In order to create a shared review I need to be able to open the document from the sharepoint site with the full version of acrobat and I cannot do that from the web browser. From a PC I would choose to add a network location and the wizard creates a network location in the explorer, then I can access the sharepoint site (across the internet) like another file folder on my local network. I cannot seem to figure out how to accomplish the same thing on the mac. When I put in the URL for the share point site in the connect dialog from the finder it opens a webdave dialog box asking for a domain name and I have no idea what that is and it tells me the password or user name is not correct. Any help would be appreciated

You might want to pose this question in the networking forum too.

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

How to Invoke tasks created in FrameMaker Publishing Server from the Windows command line

Hi All ,
i would like to know how can we Invoke tasks and schedules created in FrameMaker Publishing Server from the Windows command line.
we used publishing server mainly to convert Frame maker files into PDF and that should be do progarmatically without manual intervention on Demand.
so could you please let us know how can i invoke rthe task creted to convert FM file to PDF in FrameMaker Publishing Server from the Windows command line.
please let me know the command to execute .
thank you and waiting for valuable response.
best regards
Ramesh babu

Please see http://blogs.adobe.com/techcomm/2011/03/adobe-framemaker-server-10-and-its-command-line-ca pability.html for the same.
Harish Dhawan

How do shutdown the weblogic server from the command line prompt using web logic 8.1

I%u2019m currently using weblogic 6.1, but I will upgrade to weblogic 8.1. In weblogic 6.1, the following statements will shutdown the weblogic instance from the command line:
java weblogic.Admin -url t3://hostname:port -username system -password abc SHUTDOWN
How do I shutdown the weblogic server from the command line prompt using web logic 8.1.
Any help will be greatly appreciated.
Maria

Maria <[email protected]> wrote:
How do I shutdown the weblogic server from the
command line prompt using weblogic 8.1?Greetings Maria! Use this document, located here:
http://edocs.bea.com/wls/docs81/admin_ref/cli.html#1131733
Hope this helps...
Brian J. Mitchell
Systems Administrator, TRX
email: [email protected]
office: +1 404 327 7238
mobile: +1 678 283 6530

Starting the 10G server from the command line

How do I start the 10G APP SERVER FROM THE COMMAND LINE?

http://download-west.oracle.com/docs/cd/B10464_01/core.904/b10376/start.htm#1007557
Documentation library for Application Server 10g. It has a section on starting/stopping

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

Is it possible to start a remote server from the IDE?

I would want to know if it is possible to start a domain that makes reference to a remote server (from the IDE). On this way I could start and stop the server without loading so much the machine that I use to develop my portal applications. If it is possible how I can do it?

There is no personal Information on a crash Report unless you put something personally identifiable in the comment field. For example, here is a crash report I had on my machine awhile back: https://crash-stats.mozilla.com/report/index/bp-1de8924f-7068-4702-a410-89c492121220.
You can go to about:crashes in your address bar, and click on the report to view the info there to satisfy yourself that there is nothing in the report. But submitting crash reports is very useful because it gives us the ability to view what crashes are plaguing our users and what we need to fix.

Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi

Hallo,
I just installed LabVIEW 8.2 DSC-Module and tried to configure a OPC Client Instance. I get the Error "Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi". I have no OPC-Server installed, but is there no Demo-Server?
Thank you
Thomas

This issue might be related to opcenum not being registered correctly. Please follow the steps explained in this document to fix this problem.
As OPCdemo follows the OPC 1.0 standard it is not supported by the OPC client in LV DSC 8.x which supports OPC 2.0 and 3.0 servers. You can download an OPC 3.0 compliant demoserver from Matrikon.
I hope that helps,
Jochen Klier
National Instruments Germany

Is after effects cc trial a separate install from the subscription version?

is after effects cc trial a separate install from the subscription version?

Thank you Mylenium. All this time I have been absolutely convinced that you don't need to defragment SSDs. Is this a complete misunderstanding? Even if you do though, I have Windows 8 (not 8.1) which is doing that once a week automatically (apparently even to SSDs).
Are you saying that the 30GB disk cache set up works like a contiguous file?
i7 3930k (12 virtual cores) on P9X79 Deluxe
2 x 120GB Force GT Raid 0 SSD on SATA 6gb/s is my boot drive as well as where I keep programs and the disk cache. I do a disk clean up to remove temp files a couple of times a week but that's all.
1 x 3TB Barracuda on on SATA 6gb/s for back ups and exports
3TB Lacie on USB 3 for source video and project files
2TB Lacie on USB 3 for archive projects
660ti 2GB
I'll try a manual defrag of my RAID 0 SSDs now.

Running replicat on a separate server from the target DB

Similar Messages

Maybe you are looking for