Running reports 10g in batch mode in a remote server

Hi all
I have 10g AS and reports servives running in server1. I want to invoke some reports deployed in server1 from another server (server2) and create the output files (PDFs) in server 2.
Is this possible?
Any help is appreciated.

Use the thin client on server2:
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/Tools/thinclient/thinclient/Readme.html
To put the output on server2 you either have to map a drive to server2 on server1 or ftp the output from server1 to server2.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_deployment.htm#55

Similar Messages

How to run a 10g report in quiet\batch mode

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
return 'D:\ORADEV10G\BIN\RWRUN.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' batch=yes paramform=no destype=file'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
1. Use rwclient to submit a report request
return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';2. Use rwservlet to submit a report request
return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
return 'http://server2:7777/reports/rwservlet?'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=cache'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';

Not Able to run Report 10g through Web Layout Option

I have installed Oracle Developer 10g on my Laptop, I am able to run form, Report(In paper layout) successfully but when I try to run Report in Web Layout Mode, I am getting following error, Is there any setting is missing, could you provide some hint that would help me in resolving my issue.
Thanks
Kamlesh
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\3000\default\defaultWebApp\persistence\_pages\\_MODULE1001201432.java
javac: invalid flag: Files\Java\j2re1.4.2_01\lib\ext\QTJava.zip;;C:\Dev10g\j2ee\home\lib/ejb.jar;C:\Dev10g\j2ee\home\lib/servlet.jar;C:\Dev10g\j2ee\home\lib/ojsp.jar;C:\Dev10g\j2ee\home\lib/jndi.jar;C:\Dev10g\j2ee\home\lib/jdbc.jar;C:\Dev10g\j2ee\home\iiop.jar;C:\Dev10g\j2ee\home\iiop_gen_bin.jar;C:\Dev10g\j2ee\home\lib/jms.jar;C:\Dev10g\j2ee\home\lib/jta.jar;C:\Dev10g\j2ee\home\lib/jmxri.jar;C:\Dev10g\j2ee\home\lib/javax77.jar;C:\Dev10g\j2ee\home\lib/javax88.jar;C:\Dev10g\j2ee\home\../../opmn/lib/ons.jar;C:\Dev10g\j2ee\home\../../opmn/lib/optic.jar;C:\Dev10g\j2ee\home\../../lib/dms.jar;C:\Dev10g\j2ee\home\../../dms/lib/dms.jar;C:\Dev10g\j2ee\home\../../diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\../../dms/diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\lib/connector.jar;C:\Dev10g\j2ee\home\lib/bcel.jar;C:\Dev10g\j2ee\home\lib/cos.jar;C:\Dev10g\j2ee\home\lib/jsse.jar;C:\Dev10g\j2ee\home\../../oracle/lib/jsse.jar;C:\Dev10g\j2ee\home\lib/jnet.jar;C:\Dev10g\j2ee\home\lib/jcert.jar;C:\Dev10g\j2ee\home\lib/activation.jar;C:\Dev10g\j2ee\home\lib/mail.jar;C:\Dev10g\j2ee\home\../../javavm/lib/jasper.zip;C:\Dev10g\j2ee\home\../../lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../oracle/lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../jlib/orai18n.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/orai18n.jar;C:\Dev10g\j2ee\home\lib/jaxp.jar;C:\Dev10g\j2ee\home\lib/jaas.jar;C:\Dev10g\j2ee\home\jazn.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\jaxb-rt-1.0-ea.jar;C:\Dev10g\j2ee\home\../../soap/lib/soap.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsserver.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsdl.jar;C:\Dev10g\j2ee\home\../../rdbms/jlib/aqapi.jar;C:\Dev10g\j2ee\home\lib/jem.jar;C:\Dev10g\j2ee\home\../../javacache/lib/cache.jar;C:\Dev10g\j2ee\home\lib/http_client.jar;C:\Dev10g\j2ee\home\../../jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../jlib/repository.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/repository.jar;C:\Dev10g\j2ee\home\lib/jaasmodules.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/runtime12ee.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/translator.jar;C:\Dev10g\j2ee\home\lib/crimson.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcms.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcms.jar;;;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\classes;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;.
Usage: javac
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath Specify where to find user class files
-sourcepath Specify where to find input source files
-bootclasspath Override location of bootstrap class files
-extdirs Override location of installed extensions
-d Specify where to place generated class files
-encoding Specify character encoding used by source files
-source Provide source compatibility with specified release
-target Generate class files for specific VM version
-help Print a synopsis of standard options

Hello,
The problem seems to be a space in the Classpath :
javac: invalid flag: Files\Java\j2re1.4.2_01
Files\Java\j2re1.4.2_01 seems to be the end of c:\Program Files\Java\j2re1.4.2_01 ..
Check REPORTS_CLASSPATH
regards

Report Compilation through batch mode

Hi There,
Could you please guide me how to do the 9i Report Compilation in batch mode.
I need to compile 40-50 reports at one time on each server.
We are using IBM-AIX, Win NT, and Solaris OS
Thanks

Hi,
You could look up Note 191529.1 in Metalink
http://metalink.oracle.com
Navneet.

To run Forms 10g on Windows Mode

Is there possibility to run Forms 10g on Windows mode, not on Web ?
Thanks.

If you want to test your forms locally there is an OC4J component with the Developer Suite which can be started so you can run your Forms on your local station. This is no client/server but you run your webforms local.

Error while running report 10g

DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
     repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
     WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid

Running Reports 10g on Apps Server

We have a Windows 2003 apps server running Oracle Forms and Reports 10g.
We are having a problem running reports in Oracle 10g, and believe it to be something to do with the configuration files. Currently, we can run the test report through Enterprise Manager using both the default reports service and the one that we have created. However we are unable to run our own reports through forms.
To check that there was nothing wrong with our forms, we copied one of the reports into the â¦\forms10g\reports\samples\demo folder to see if we could run it through Enterprise Manager. However, we get the following error:
Rep-110: Unable to open file â¦â¦
Rep-1070: Error while opening or saving a document.
Rep-0110: Unable to open file â¦...
We then renamed the test.rdf file and tried to run that. Again we got the above message. Next we tried again to run test.rdf, even though this no longer existed, and the report ran. This implied that it isn't actually running the report, but has the report output stored somewhere, and it just displays this.
No matter how we try to run reports, and with which reports service, we always get the above error.
So why is it that no reports will run, not even the test one when it is renamed? Is there a configuration setting somewhere?

Hi All,
Hope YOu are fine.
We have running Oracle Forms and Reports Services 10g on Windows 2000 Advanced Server.
The Application Works fine, and reports are generated successfully.
But when we access the same application by using either Linux OS (RHEL 4.0, Ubuntu 6),
The forms works fine but Linux OS could not run the report.
This seems to be a configuration problem.
Any Clues.
Thanks and Looking Forward.
Aamer Javaid
[email protected]

To run a program in batch mode

I have to creaet a program to run in batch mode to update anln1 and anln2.
selection screen : company and cost center.
I have to read z table
update anln1 and anln2 ( from table anla )
Can anybody help me how to write a program in batch mode and update....

Hi,
Write the entries logic with the condidtion like below.
after selecting the required data,
if sy-batch = 'X'.
Now update the required table.
endif.
Even you can put the select statement also after if condition.
now go to SM36 and define the Job with Program name or any other name.
Under Job condition select the execution mode/time of your program.
As you have mentioned the sy-batch condition , your program will work only for Back ground mode.
Hope it helps you.
Kind Regards,
Ravi Sankar.Z

Error when run report 10g (10.1.2.0.2) with Paper parameter form

Dear Friends
I just installed Developer suite 10g and Database 10g on my pc (10.1.2.0.2) when I run report in Report builder with paper parameter form (I selected only one system parameter : Destination type) I got the message
Reports Error Page
Fri Apr 07 09:06:01 GMT+07:00 2006
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
How to solve it? Please give me the instruction or Oracle link that I can get the documents. If someone has the white paper .pdf please give me.
Hope with help
Thanks & Best regards,
Bansak K.
[email protected]

Thanks for the tip.
Correct me if I am wrong but you have set up SLED SP1 connecting to an OS like (RHEL 4/OEL 4,SuSE 9) using VMWare Server. What OS is SLED?
I chose SUSE 10.3 as its free and I want to set up apps server for purely training purposes. Do you know of a free linux OS that is certified to run AS 10g 10.1.2.0.2?
Thanks
Jon

How to upgrade froms and reports 10g to froms,Repor 11g on weblogic server

I need to setup a test environment to upgrade Oracle Developer Suite (Forms and Reports 10g) and Oracle BI (Discover) to weblogic. We are using Oracle 10g.
What software I need to install and and in which order? Help will be highly appreciated. Thanks

Hi,
You can find many articles on oracle site for this subject.
However in brief following are the steps
1) Create a directory source,executables,images,reports and logfiles.
2) Copy all your forms, menus and pll's in source directory
3) All your images in your image directory
4) All your reports in reports directory
5) All yuor fmx,mmx and plx in executables directory
6) Any log files in logfiles directory
7) Add path of images and executables directory in FORMS_PATH in default.env
8) Configure your formsweb.cfg as your need.
9) Configure report.conf and rwservlet.properties according to your applications.
10) Make jar of icons say myicons.jar.
11) copy myicons.jar in forms/java directory
12) Check yuor form services if they are running or not.
13) Invoke the URL in internet explorer
http://<ip_address>:<port_no>/forms/frmservlet?form=testform.fmx
I think that's enough from my side.. For more info you can go through the documentation.
Regards
Anuj

Cannot open Report Manager URL -- "Unable to Connect to Remote Server"

Hi,
I have recently installed SSRS 2012 on my remote server (Native Mode). I had the default configurations set except for the port has been changed to "8081". I created an Inbound Rule in Firewall to make sure it's enabled.
I'm unable to connect to the report manager locally at all, I got a Domain\username authentication and the credentials are never accepted locally. I tried accessing my report server using the remote server host name and I was successfully logged in,
however, I got a message "Unable to Connect to the remote server".
I checked the log folder and there was no files created for my unsuccessful login.
I've been stumbling with this issue for almost a week, Any ideas or suggestions ?

Hi SB User,
Per my understanding that after you change the IP to "8081" then you can't connect to the report server both locally and remotely, right?
Is that mean before you have changed the IP, everything works fine and did you got some pop up window ask for credential when you connect to the report server?
You issue can be caused by many factors, please try to check details information below and do some configurations:
Go to Reporting Services Configuration Manager and change the account to "Network Service" to see if it will works fine.
Change the account to domain account and re-enter the username and password to see if it works fine.
Remove the SSL if configured.
Go to C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config
In rsreportserver.config Change the SecureConnectionLevel value to "0":
<Add Key="SecureConnectionLevel" Value="0"/>
Stop and restart the report services instance to see if you can connect to report server.
please also Using IP instead of computer name as the <servername> in the URL to have a test.
If your issue still exists, please try to change the IP to have a test.
If you still have any problem,please fee free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How can you run a command with elevated rights on a remote server with invoke-command ?

I am trying to run a script on a remote server with invoke-command. The script is starting and is running fine, but the problem is that it should be running with elevated rights on the remote server. On the server where I start the invoke-command, my account has the necessary rights.
The server were I launch the invoke-command is a W2K8 R2. The remote box is a W2K3 with powershell v2.0 installed.
When I launch the script on the remote-box from the command line, I don't get the access denied's.
Is there a way to do this ?
Thanks in advance

The script that I want to run is to install the windows updates. I get an access denied on the download of the updates.
When I execute the script on an W2K8 box, (not remotely) and I run it with non-elevated rights, I get the same error.
The script is running fine when it is launched on W2K3 box locally with a domain account that has local admin rights, or on a W2K8 R2 server with a domain account that has local admin rights, but with elevated rights.
Thanks in advance for your help.
#=== start script ====
param($installOption="TESTINSTALL",$rebootOption="NOREBOOT")
Function Show-Help
Write-Host ""
Write-Host "SCRIPT: $scriptName <installOption> <RebootOption>"
Write-Host ""
Write-Host "DESCRIPTION: Installatie van WSUS updates op de lokale server"
Write-Host ""
Write-Host "PARAMETERS"
Write-Host " -installOption <[INSTALL|TESTINSTALL]>"
Write-Host " -rebootOption <[REBOOT|NOREBOOT|REBOOT_IF_UPDATED]>"
Write-Host ""
Write-Host "EXAMPLE:"
Write-Host "$ScriptName -installOption INSTALL -rebootOption REBOOT_IF_UPDATED"
Write-Host "$ScriptNAme INSTALL NOREBOOT"
Write-Host ""
Write-Host "Indien beide parameter weggelaten worden zijn de defaultwaarden :"
Write-Host " installOption=TESTINSTALL "
Write-Host " RebootOption=NOREBOOT"
Write-Host ""
Exit
#Include alle globale variablen
$CEIF_WIN_PATH = (get-content env:CEIF_WIN_PATH)
$includeFile=$CEIF_WIN_PATH + "\Scripts\include_win.ps1"
. $includeFile
#initialiseer error count
$errcnt=0
$scriptName=$MyInvocation.MyCommand.Name
#argumenten controleren
$arrInstallOption= "TESTINSTALL", "INSTALL" # Mandatory variable with predefined values
If (!($arrInstallOption –contains $installOption)){ Show-Help }
$arrRebootOption = "REBOOT", "NOREBOOT","REBOOT_IF_UPDATED" # Mandatory variable with predefined values
If (!($arrRebootOption –contains $rebootOption)){ Show-Help }
#Logfile opbouwen
$logfile = get-logfileName($MyInvocation.MyCommand.Name)
Log-scriptStart $MyInvocation.MyCommand.Name $logfile
function Get-WIAStatusValue($value)
switch -exact ($value)
0 {"NotStarted"}
1 {"InProgress"}
2 {"Succeeded"}
3 {"SucceededWithErrors"}
4 {"Failed"}
5 {"Aborted"}
function boot-server()
if ($installOption -eq "TESTINSTALL")
logger "TESTINSTALL : - Reboot local Server" $logfile
else
logger " - Reboot local Server" $logfile
$thisServer = gwmi win32_operatingsystem
$thisServer.psbase.Scope.Options.EnablePrivileges = $true
$thisServer.Reboot()
$logmsg="Install option = " + $installOption + ", RebootOption = $rebootOption"
logger "$logmsg" $logfile
logger "" $logfile
logger " - Creating WU COM object" $logfile
$UpdateSession = New-Object -ComObject Microsoft.Update.Session
$UpdateSearcher = $UpdateSession.CreateUpdateSearcher()
logger " - Searching for Updates" $logfile
$SearchResult = $UpdateSearcher.Search("IsAssigned=1 and IsHidden=0 and IsInstalled=0")
logger " - Found [$($SearchResult.Updates.count)] Updates to Download and install" $logfile
$Updates=$($SearchResult.Updates.count)
logger "" $logfile
foreach($Update in $SearchResult.Updates)
if ($Update.EulaAccepted -eq 0)
$Update.AcceptEula()
# Add Update to Collection
$UpdatesCollection = New-Object -ComObject Microsoft.Update.UpdateColl
$UpdatesCollection.Add($Update) | out-null
if ($installOption -eq "TESTINSTALL")
else
# Download
logger " + Downloading Update $($Update.Title)" $logfile
$UpdatesDownloader = $UpdateSession.CreateUpdateDownloader()
$UpdatesDownloader.Updates = $UpdatesCollection
$DownloadResult = $UpdatesDownloader.Download()
$Message = " - Download {0}" -f (Get-WIAStatusValue $DownloadResult.ResultCode)
if ($DownloadResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
# Install
logger " - Installing Update" $logfile
$UpdatesInstaller = $UpdateSession.CreateUpdateInstaller()
$UpdatesInstaller.Updates = $UpdatesCollection
$InstallResult = $UpdatesInstaller.Install()
$Message = " - Install {0}" -f (Get-WIAStatusValue $InstallResult.ResultCode)
if ($InstallResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
logger "" $logfile
#Indien er een fout gebeurde tijdens download/installatie -> stuur mail naar windowsteam
if ( $errcnt -gt 0 )
logger " - Fout tijdens de uitvoering van script -> send mail" $logfile
$mailSubject=$MyInvocation.MyCommand.Name
$msg = new-object Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($logfile)
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$msg.From = $mailFrom
$msg.To.Add($mailTo)
$msg.Subject = $mailSubject
$msg.Body = “Meer details in attachement”
$msg.Attachments.Add($att)
$smtp.Send($msg)
#Moet de server herstart worden ?
if ($rebootOption -eq "REBOOT_IF_UPDATED" )
if ($Updates -gt 0)
#Reboot the server when updates are installed
boot-server
elseif ($rebootOption -eq "REBOOT")
#reboot the server always
boot-server
else
#Do not reboot the server
logger "Do not reboot the server" $logfile
Log-scriptEnd $MyInvocation.MyCommand.Name $logfile
exit 0

Running a crystal report xi in batch mode (C# runs a crystal report xi in batch mode)

<p>Does anyone know if it is possible in a C# program to submit a Crystal Report XI? </p><p>Our design is to use C# front end to prompt the user for the parameters for the report. These parameters would be stored in a table. At night the C# program would wake up and based on the parameters, the C# program would submit the crystal report to run.</p>

hi..
am using .net version 2005 and crystalreports version 9.0
i pass value from crystalreportviewer page to crystal reports design page using parameter fields but they take only first row data only...
i want to display dynamic values .. values are passed correcltly but not displayed... all fields dispalyed same value from database first row..
is there any solutions .. please reply me..
my mail id: [email protected]

Any documentation on running report 10g in linux server

Dear Gurus,
We are converting 6i reports to 10g reports. I need some documentation on how to run 10g reports in Linux Server! In windows environment working fine but need to test in Linux side! Pleas help thanks!

Hi!
I have some questions about CopyApp utility. I am trying to Copy TestApp to Prod application. Those applications are on different Planning servers. Sql databases are on the same sql server. Olap applications cubes are on different essbase servers.
Is this syntax correct: (I think I can run this on Planning production server, or should I use Planning test server or does it matter when I use properties file???)
CopyApp /S:TestApp /T:ProdApp /P:\\D:\Hyperion\Planning\bin\Copyapp.properties
In the Copyapp properties file (using Sql):
Is this correct syntax (referring to syntax above, left out usernames and passwords etc)
App_JDBC_CATALOG=TestApp
App_JDBC_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
App_JDBC_URL=jdbc:hyperion:sqlserver://XXX
App_JDBC_USERNAME=
App_JDBC_PASSWORD=
App_JDBC_DATABASE_TYPE=SQL
App_OLAP_SERVER= essbase server1
App_OLAP_USERNAME=
App_OLAP_PASSWORD=
App_OLAP_APPNAME=TestApp
App1_JDBC_CATALOG=Prodapp
App1_JDBC_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
App1_JDBC_URL=jdbc:hyperion:sqlserver://XXX
App1_JDBC_USERNAME=
App1_JDBC_PASSWORD=
App1_JDBC_DATABASE_TYPE=SQL
App1_OLAP_SERVER= essbase server2
App1_OLAP_USERNAME=
App1_OLAP_PASSWORD=
App1_OLAP_APPNAME=ProdApp
Should I change something to make this work?
kind regards, user 637777
Edited by: user637777 on 3.10.2008 4:27

Running reports 10g in web

hi
i am trying to run a report from the web
i get the error 'UNABLE TO CONNECT TO REPORT SERVER XXX'
in 6i on the console it works correctly
i want to know if there is a different way to run a report in web 10g, is it necessary to run a report server, or i can like in 6i just configure the registry?
thanks for any help

Hello,
Since 9.0.2, you have to start a reports server :
On Windows rwserver server=repserver
then use a URL like :
http://server:port/reports/rwservlet?server=repserver&report=test&destype=cache&desformat=html
Regards

Running reports 10g in batch mode in a remote server

Similar Messages

Maybe you are looking for