Running reports in CMC is Slow (the first time)

when we first log into CMC - the report takes 10 minutes or more to run.
when you run it subsequent times - it takes less than 15 seconds...
what could be causing this unbearable delay the first time?
I've seen some people say that you should build a blank report that users can run first - that is not a solution....
Has anyone had a similar experience?

Check the same query on DB, notice how much it takes to run.
What might be happening here is, first time when it ran, that may be normal time it takes to run the report. After that, WEBI processing server (assuming you are running WEBI report) keep it in cache, so next time when it runs for the same data, it takes it from the cache, instead of querying the DB again. That is the reason, you see the results quickly.

Similar Messages

  • Running Reports 6i and 9i at the same time

    I was wondering what the issues were with running Reports 6i and 9i at the same time. We are planning on up grading at a client, and I heard that there are some problems with doing this. I was thinking that installing them in different ORACLE_HOME's would help keep problems to a minimum. At home I have Reports 6i and 9i running, and I have not seen any problems.

    We suggest you install 6i and 9i at different oracle home. There are no known issue about running 6i and 9i at the same time.
    Thanks,
    -Shaun Lin

  • Known Issue while running Adobe Story desktop application for the first time on Mac OS 10.8

    You may encounter the following error message while running the Adobe Story desktop application for the first time on Mac OS 10.8:
    For resolution, please go to:
    http://helpx.adobe.com/story/kb/run-story-app-mac-os.html

    The /Developer directory contains the compiler(s) and various tools and libraries.
    Does your user account name really contain a single quote? If so, it looks like the quote is getting eaten by one of the build scripts, which is resulting in a file path that doesn't exist.

  • Classic Report not retrieving when accessing the first time

    I have two classic reports on two separate tabs and the first time that I access the tabs, the report does not retrieve. However, if I tab off and then back onto the tab, the report will retrieve.
    Any idea why these two tabs are not retrieving when initially accessing the tab?
    I have several other tabs in the same application that retrieve properly when initially access them.
    Thanks,

    I think I remember something like that happening to me because there were variables that were not initialized properly that the report used.

  • Slow the first time to run

    when I run safari after turning on my pc, it is too slow to start.. how can optimize safari to avoid this delay. any help will be appreciated. Thanks.

    Loading at startup or first time launched? Vista is doing so much already at startup I don't auto load anything extra.
    Empty cache from the Edit menu would be one thing to try. Also delete history.
    There is no way to control how large the cache file gets.
    Does it check for RSS updates or anything?

  • Report Viewer is very slow at first time

    Hi,
    We are facing very slow when loading the reports.For any search it is taking more time to load the reports.We are thinking issue is due to report viewer control and we are using report viewer control version 10.0.0.0.Could you please let us know how to resolve
    this issue.
    Thanks,
    Vijay

    How big id the query?  How much memory does the server have? It is possible that an execution plan/data pages of the query was thrown from the cache and SQL Server needs to compile/read the data from disk again.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Running Xcode 3.2.3 for the first time, hitting an error immediately

    Hello. I'm learning Objective-C from a book ("Beginning Mac Programming"), and I've run into an error right out of the gate. I've checked the book's errata, as well as left a message with the author, but neither have solved the issue.
    Here's what happened:
    1. I installed Xcode 3.2.3 (I'm on 10.6.4)
    2. Opened it
    3. Selected "New Project"
    4. Application->Cocoa Application
    5. Save app location to my user directory
    6. Hit "Build and Run"
    I haven't touched any code at all, yet I get the following error:
    Build TextApp of project TextApp with configuration Debug
    Ld build/Debug/TextApp.app/Contents/MacOS/TextApp normal x86_64
    cd "/Users/dan's/TextApp"
    setenv MACOSXDEPLOYMENTTARGET 10.6
    /Developer/usr/bin/gcc-4.2 -arch x86_64 -isysroot /Developer/SDKs/MacOSX10.6.sdk -L/Users/dan's/TextApp/build/Debug -F/Users/dan's/TextApp/build/Debug -filelist /Users/dan's/TextApp/build/TextApp.build/Debug/TextApp.build/Objects-normal/x86 _64/TextApp.LinkFileList -mmacosx-version-min=10.6 -framework Cocoa -o /Users/dan's/TextApp/build/Debug/TextApp.app/Contents/MacOS/TextApp
    ld: file not found: /Users/dans/TextApp/build/TextApp.build/Debug/TextApp.build/Objects-normal/x86_ 64/main.o /Users/dans/TextApp/build/TextApp.build/Debug/TextApp.build/Objects-normal/x86_ 64/TextAppAppDelegate.o
    collect2: ld returned 1 exit status
    Command /Developer/usr/bin/gcc-4.2 failed with exit code 1
    Any suggestions? I'm completely new to this, so I have absolutely no clue what to do next. The error command seems to be looking in the "developer" directory, although the code is saved in my user directory.
    Any help would be greatly appreciated.
    Thank you.

    The /Developer directory contains the compiler(s) and various tools and libraries.
    Does your user account name really contain a single quote? If so, it looks like the quote is getting eaten by one of the build scripts, which is resulting in a file path that doesn't exist.

  • Running a Form (Oracle 9i) For The First Time

    Hello
    I am new to Oracle Forms Development and having difficulty getting a test form to execute in my browser (IE).
    When I attempt to run the form (by selecting "Run Form" from Forms Builder's "Program" menu) I get an HTTP 400 - "Page Not Found" Error. The url posted is of the form: "http://server:8888/forms90/f90Servlet?form=..."
    This suggests to me that "f90Servlet" is a file, however, this file does not exist on my server machine.
    I have confirmed that my web server (apache) configuration is good by entering the url: "http://localhost:8888/" which properly serves index.html in my apache web root.
    Has anyone else experienced the same or know how to resolve this issue? Any help would be most appreciated...
    Thanks
    rw

    For grins, I started Jinitiator as you said I should (even though I had done it many times before). This time, however, I actually read the ENTIRE output message which indicated that there was an "Error starting HTTP-Server: Address in use: JVM_Bind". Previously, I did not pay much attention to this message since it was followed by the message:
    "Oracle9iAS (9.0.2.0.0) Containers For J2EE initialized"
    This was true because the [forms?] web server was attempting to share port 8888 which my Apache instance was configured to use. After configuring Apache to run on a different port, I was able to successfully start JInitiator without errors. Thanks
    Oh yeah...no need to apologize to me for reading more than one language...even after three years of high school french, I only read one!

  • Firefox is taking a long time to open the first time I click on it and also a dialouge box comes up stating firefox is already running, but is not responding, you must close existing firefox process? What is going on?

    After I start my computer in the morning, I go to my email, then I click on firefox, with google as my homepage, it takes a long time for firefox to show up on the computer. It says it is connecting, then when I close firefox, and go to reopen it again, a dialog box opens up that says firefox is already running and I must close existing firefox process first. I have not run into this problem before.

    * The first time you start up any application after turning on your computer is called a cold start, which is why Firefox takes a while to load right away. (I've noticed that future versions of Firefox start up faster on a cold start then Firefox 5.0.1.) Also, a lower amount of RAM could be slowing its start-up down since Firefox is kind of memory hungry.
    * As for the second part of your question, press ctrl,Alt, and the delete keys on your keyboard. The Windows Task Manager should start. Go to the processes tab and look for 'firefox.exe'. Right click on the firefox.exe and click 'End Process'. Hit Yes and wait for a minute.
    * Then opening Firefox again.
    Hopefully this helped somewhat!

  • Error when running report in CMC and Infoview

    Hi all,
    i have this following problem:
    - when i try to run report in cmc it fails and i get this error message: Error in File ~tmp1a745af945b59b0.rpt: Failed to load database information
    - when i try to run the report in infoview the error message looks like this: Error in File test_4: Failed to load database information.
    Where can be the possible problem ?
    Thanks for any suggestions.

    <b>i dont know if this could help you, but i found something when trying to refresh report in infoview - the full error log:</b>
    2009-05-27 08:40:54
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File Vykaz_2:
    Failed to load database information.---- Error code:-2147215357 Error code name:internal
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.findGroup(Unknown Source)
         at com.businessobjects.report.web.event.q.a(Unknown Source)
         at com.businessobjects.report.web.event.z.a(Unknown Source)
         at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
         at com.businessobjects.report.web.event.ak.a(Unknown Source)
         at com.businessobjects.report.web.a.q.if(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.if(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.if(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:595):
    Edited by: Martin  Zluky on Jul 27, 2009 9:35 AM

  • Error when running report in CMC and Infoview_2

    I made this same thread in BOBJ Administration section but maybe it belongs here..........
    Hi all,
    i have this following problem:
    - when i try to run report in cmc it fails and i get this error message: Error in File ~tmp1a745af945b59b0.rpt: Failed to load database information
    - when i try to run the report in infoview the error message looks like this: Error in File test_4: Failed to load database information.
    Where can be the possible problem ?
    Thanks for any suggestions.

    Hi,
    this forum is about the Integration Kit with SAP. seems to belong to the BusinessObjects administration area
    Ingo

  • I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

    I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

    Demons1 in the future please only migrate your documents and settings.
    Please use the uninstallers to remove your current installation.  They are located in the Applications/Utilities/Adobe Installers folder.  Once the uninstall is complete you will also want to run the CC Cleaner Tool.  You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

  • I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

    I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

    mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
    Not sure where these hard disk folders are located that you are referring to?  Finder, Finder tool bar, Finder side bar, Desktop, Dock? 
    More then likely they are  an alias that not longer point to the orginals,  thus the question mark.
    I would reboot.  Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

  • How to find that a java program is running for the first time on daily basi

    it is like this
    1. i will ran a java program every day and i have to find that it is running for the first time(as i may stop that program and may run again the same day )
    Pls share ur ideas

    san.kumar wrote:
    it is like this
    1. i will ran a java program every day and i have to find that it is running for the first time(as i may stop that program and may run again the same day )
    Pls share ur ideasAs kajbj said - you need to store a token / file with a run date on the file system. Each time the application runs, have it compare with the date from this file with the current date. If different, it's the first run of the day. If not, it is not the first run of the day. Each time have it update the date on the file.

Maybe you are looking for