Running rwrun.exe (10g) but nothing happened

Hi all,
I try to run the report 10g from win xp from my pc together with the report builder installed on the same machine. when i run the rwrun.exe with the below parameter from the cmd prompt ;-
rwrun.exe userid=orion/orion@orcl report=c:\test.rep desformat=spreadsheet
once I enter the command imediately it prompted out without running the exe file. How can it be ?? does anything wrong with the installation or what ??
Rgds
Lim

Hello,
First the parameters DESTYPE and DESNAME are missing. The command should be :
rwrun.exe userid=orion/orion@orcl report=c:\test.rep desformat=spreadsheet destype=file desname=c:\temp\output.xls
Check the file reports.log created in the working directory
regards

Similar Messages

Elements 6 Runs under Vista 64 BUT nothing happens !

Under Vista 64bit OS I have installed the elements 6 software and the installation completed fine. When I start the
program nothing happens. I have inserted an SD card into my PC and the Adobe Photo Autodownloader started OK, so at least part of
the software is working.
I have tried an uninstalled and reinstall but this makes no difference. If I open the program, nothinghappens. The process appears in Task Manager as running Photoshop Element 6.0.exe but the application does not start. Aside from the entry in the Task Manager there is no sign of the application actually running.
I have an open problem with Adobe but so far they have sent one suggested fix that was for a different application on a different operating system ! Plus one suggested fix that was for a different problem !
Has anyone seen this and/or can provide any suggestions.
Any help would be very much appreceated. !

Hi,
Thanks for this suggestion . I have tried this twice but it does not seem to make any difference so I still have the problem where nothing happens when I run the application.
Not sure if anyone else has this issure.
Adobe support suggested this as well (a few hours after yourself).
Any other suggestions out there ?

A2 during boot reset CMOS goes to run set up F1 but nothing happens???

I am really confused with this computer. I booted it the first time got into the bios no problem. Was not ready to do it. So shut the computer back off. Later I am ready to sit down and do it and I get the a A2 message on the bottom of the screen. I pulled the battery cleared the CMOS put it back together and I get the F1 key to go to set up. It goes to set up in the bios is already in the advanced screen stuck on PCI. No way I can get to the main menu. It shows the RAM fine and the CPU fine on the top, but there is no way I can get back to the main menu in the bios. I unplugged all my SATA cables and it does the same thing but it just hangs at the F1 run set up. I hit F1 and nothing happens. I tried to shut off the numeric lock key and nothing happens. It's like the keyboards locked. The only device I still have looked up is the DVD and the msata hard drive. Of coarse I am going to pull that out next. I have built a lot of computers never with one of the new bios, which is a whole different breed of animal. I searched the Internet and this forum and found the A2 was the hard drives, but that was it.
System:
Z 87 – 45 motherboard
4670 K CPU
, RAM GSKILL RIPSHAX X 1866 24MB
MSATA 128 GB crucial SSD drive.
2 SSD crucial 128 GB drives, wanting to run in raid.
1. SATA Western Digital 500 GB raptor.
Any ideas?? I'm STUCK
CHUCK

M500 VTX450-25SAT3-128G Indilinx controller on sata 1 2
M500 CT120M500SSD3 0 128G Marvell controller on MSATA
I still running to the same problem with these unplugged. When I take up the battery cleared the CMOS I can get into the bios but it's not right. I am already in the advanced section of the bios and they can get back to the system status screen.
Thanks so much for your help.
Chuck

Tried downloading the free trial of adobe acrobat xlpro and it downloads the assistant, but nothing happens

I have tried clicking on the exe button, but nothing happens.

Flshopper what exe file are you double clicking on? After you download the installation files you will need to run them to install the application.

I run firefox, it shows in task manager, but nothing on screen, i run it again get it on screen but nothing happens its dead

i start firefox, nothing happens, but firefox.exe is running according to the task manager, i run it again, and it appears on the screen but nothing happens, it doesnt connect to anywhere, just sits there, nothing clicks, no menus pull down but i dont get any not responding error

i start firefox, nothing happens, but firefox.exe is running according to the task manager, i run it again, and it appears on the screen but nothing happens, it doesnt connect to anywhere, just sits there, nothing clicks, no menus pull down but i dont get any not responding error

Installed the install flash player 15 exe , opened it up but nothing happens, why?

After I got a message on my plugin page on Firefox that flashplayer needed an update I thought oke.
I uninstalled flash player with the Adobe uninstaller.
I downloaded the flashplayer exe. but nothing happens, then try again but it keeps saying there can only one instance of this application can run, but nothing is working, it just wont install.
When I open task manager it says Adobe installation helper is running, but what does that do?
What do I have to do to make it work?
I am using Vista.
Please help me, thanks.

wow finaly found the solution to get the flashplayer to instal on my laptop.
It came trough a mozilla supporte page lol
One of the answers was: if one keep having problems with the installation then one should go to Adobe Laps.........grr never heard of that part of Adobe.
but there you go, you learn every time something out of the pool of frustration.
the link to it is this
http://labs.adobe.com/downloads/flashplayer.html
I got the debugger download and voila within secondes I got the little ******* to run:)
Why not put this link on your main download page people would try it directly so many spend hours or even wors days on trying to fix it!!
Thanks Adobe for so many hours of frustration, what will it be next time
For now very happy:)
I am very proud of myself and very thankful for the Mozilla Support group answer!!!

I paid for lion because my 2006 mac pro will not run anything newer (arbitrary decision by apple). Downloaded it, but nothing happened. App Store now says i've already downloaded it, so I can't try again. App store also says lion isn't available in usa.

I found out that an 06 mac pro cannot be updated to anything more recent than lion. They guys at the local shop told me this after they tried to update it for me so I could run logic pro 9 in 64 bit mode. I bought lion. Waited two days for the emails. Spent hours following the instructions which sounded so simple until you try them. Finally I found the "redeem" button that was hidden because the size of my safari window was too small to show it and there was no bar at the bottom to scroll over. Without googling "how do you find the app store" and "how do you find quick links" I never would have figured it out. I only mention this so that others may learn from my mistakes. Finally I downloaded lion, supposedly, but nothing happened. There is no indication that anything downloaded, other than the fact that when I try to download it again, it says it's already been downloaded. I spent four hundred bucks at the shop updating, plus whatever they charged me for lion, and I've still got snow leopard and logic pro running at 32 bits. I'm pretty sure nobody can help me, but could you please arrange for the return of my time?

You can go to "Purchases" tab and check again.
If OS X Lion is still not downloading, try at a different network environment.
By the way, Mac Pro (2006) with a newer graphics card runs Mavericks perfectly with modifications in the installer.
It's not allowed to be discussed here, but you can simply google how to do it.

HT204406 I can't seem to download songs from iTumes Match on my new iPhone 5. It still works fine on my iPad. Both are running ios6 and there is plenty of free space on the phone (20 GB or so). The download icon shows & flashes but nothing happens.

I am trying to play songs from iTunes Match on my phone everything is enabled. The songs and playlists show up but when I select one it won't download or play. The download status icon next to the song name flashes on and off but nothing happens. When I go to the iTunes Store the download section shows the same behavior - it flashes that there is 1 download continuously but nothing downloads. My iPad on the same network also running ios6 works fine. Any ideas?

Problem closed (although not resolved). After working with Apple support, no resolution was found. I asked for a refund of the iTunes match purchase price, which was granted. Interestingly the support tech, who was very nice if not particularly helpful from a technical point of view, spun the "resolution" of refunding my iTunes match purchase price as a positive one, here is a quote from the final email
"I'm glad to hear that you're not having issues with the songs you've purchased. Nothing makes Apple happier than to hear that our customers concerns have been rectified."
It is notable that I never had an issue downloading music directly purchased thru the iTunes store, the only issue that existed was downloading songs that I ripped from my CD collection and "matched".
I'm happy that I received my money back, however I wish that the iTunes Match service worked for me (I was looking forward to this service). I'm most upset at the time I wasted trying to fix this problem.
I'll now download music the old fashioned way: syncing with iTunes directly.

I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???

I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???
I can see the block (flashes) and the buttons are no longer usable.
I have Empted Cache but doesn't seem to help.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

When I launch it nothing seems to happen, if I look in processes in task amanegr it seems to be running but nothing happens on the screen. I've tried re-installing several times but still have the same problem?, can you help?

when I launch it nothing seems to happen, if I look in processes in task amanegr it seems to be running but nothing happens on the screen, after a few minutes I get a run tme error.

The window could be opening off screen.
*See --> http://www.sevenforums.com/tutorials/75291-offscreen-window-move-back-desktop.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

HT1719 My itunes doesn't list "devices" above the playlist. How can I sync the music I have purchased to my new ipod shuffle if it doesn't give me the option? The shuffle is plugged into my computer, but nothing happens. Help please!

My itunes account doesn't list "devices" above the playlist, as the syncing instructions give. How can I sync the itunes I have purchased & downloaded to my computer, to my ipod shuffle? The device is plugged into my computer, but nothing happens. Shouldn't the computer recognize the device? It doesn't. Please help!

As a test, shut down your computer and disconnect ALL USB devices. Do this procedure to Reset the shuffle
http://support.apple.com/kb/HT1655
Start up computer with nothing connected, except for standard keyboard and mouse (if it's not a laptop). Run iTunes. Connect shuffle to a direct USB port on the computer. See if there's any improvement,
If the shuffle is now recognized, there may have been a USB device conflict previously, or maybe all of the devices connected at the same time overloads the USB bus (for power). An iPod charges its battery while connected, so it is a high-power USB device.

I recently deleted a partition on my mac that was intended to install windows. Now it is just blank space. I attempt to resize my Macintosh HD partition to cover entire hard drive space and hit apply but nothing happens (disk utility). Any ideas?

I have a few problems...
I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

Hello, my i phone froze suddenly and it won t start up. when people call me they hear it ring but the phone is dead, the screen all black and when i press the start up button nothing happens. i tried to connect it to the macbook but nothing happens

hello, my i phone 4 froze suddenly. before it did, the battery was 80% full. i called it from another phone and i can hear a ringing tone but my phone is completely dead. i pressed the operating button and nothing happens. also i tried connecting it to my mac but nothing happens. i also put it on the charger but nothing happens. any tips please?

Try this yet then.
How to reset your SMC >>
Run fsck.
1. Reboot/Startup holding your Command-S key down.
2. At the command line type the following and hit 'Return.'
/sbin/fsck -fy
3. After it has check/repaired your disk, type 'reboot' and hit 'Return' again. Unit should bootup normally.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

How do I get Javascript to work? It is enabled in options but nothing happens when I select something that begins "javascript" on the status bar at the bottom of screen.

When I tried to download a file from the Canon U.S.A, I clicked on the "I agree - begin download" button and nothing happened. The information in the status bar at bottom of screen, when the mouse cursor is over the download button is "javascript:downloadFile()". I got following from the error console -
Error: The stylesheet http://www.usa.canon.com/wsss/GeneratedPages/wsss_xsl/global.css was not loaded because its MIME type, "text/html", is not "text/css".
Source File: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/i_series/i950_series?selectedName=DriversAndSoftware
There were also many warnings about parsing of commands.
This sort of thing seems to happens whenever whenever javascript is involved.

I checked out the "Unable to download or save files" section. The only thing that seemed applicable was the "Reset download actions" section. I renamed the mimeTypes.rdf file to mimeTypes.rdf.old but it didn't seem to have any effect on downloading the file I wanted. There was still no response when I asked for the download.
I have noticed another problem that occurs when I try to download this file. I exit Firefox, then try to restart it. But nothing happens. I have discovered that in the Task Manager that the Firefox process is still running. When I end the Firefox process in the Task Manager, I am then able to restart Firefox.
By the way, I am able to download the file using Internet Explorer without difficulty.

HT4623 I have tried to download and install the new IOS7 to my IPhone 4 three times but nothing happened. What do I do next? I no longer have a "1" on my settings.

I tried to download and install the new IOS7 software to my IPhone 4 three times but nothing happened. What do I do next? I no longer have a "1" by my settings.

Okay genius, try reading before posting.
These are user to user technical support forums.
No one here sent you any notification or posted any such website.
Plug the device into a computer running iTunes and update.

Running rwrun.exe (10g) but nothing happened

Similar Messages

Maybe you are looking for