Running sa-update on 10.4.11

Hi,
I've just updated my Tiger server to SpamAssassin 3.2.5 and issuing "spamassassin -V" shows 3.2.5 so I'm fairly happy that it has worked.
Thing is, I'm trying to run sa-update and it seems to be failing.
I'm issuing "sa-update --nogpg" and I get a string of errors such as the following:
config: configuration file "/tmp/.spamassassin779q7go1Otmp/72_active.cf" requires version 3.002004 of SpamAssassin, but this is code version 3.002005. Maybe you need to use the -C switch, or remove the old config files? Skipping this file at /Library/Perl/5.8.6/Mail/SpamAssassin/Conf/Parser.pm line 372.
Anyone got any ideas as to why this is happening?
Thanks,
Stu

Thanks Sebastian, such feedback - which can help others locate a solution to their problem - is always appreciated!

Similar Messages

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

Error in running baseline update from ATG

Hi,
I am trying to import the content in my ATG app schemas as indexed records into Endeca.
After making the configuration changes listed in the ATG-endeca integration guide , When I try to do baseline index from http://localhost:7003/dyn/admin/nucleus/atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin/ , following is what I get :
PreIndexing (Duration: 0:00:00)
     /atg/endeca/index/commerce/CategoryTreeService                COMPLETE (Succeeded)
RepositoryExport (Duration: 0:00:19)
     /atg/endeca/index/commerce/SchemaExporter      58      0      COMPLETE (Succeeded)
     /atg/endeca/index/commerce/CategoryToDimensionOutputConfig      9      0      COMPLETE (Succeeded)
     /atg/endeca/index/commerce/RepositoryTypeDimensionExporter      15      0      COMPLETE (Succeeded)
     /atg/commerce/search/ProductCatalogOutputConfig      31      0      COMPLETE (Succeeded)
EndecaIndexing (Duration: 0:02:18)
     /atg/endeca/index/commerce/EndecaScriptService                COMPLETE (Failed)
following is what I get in logs :
**** info Wed Dec 19 15:09:19 IST 2012 1355909959144 /atg/endeca/index/commerce/EndecaScriptService Starting script BaselineUpdate in application ATGen
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin --- atg.repository.search.indexing.IndexingException: Starting scrip
t BaselineUpdate of application ATGen failed
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:276)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by :java.net.ConnectException: Connection refused: connect
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.j
ava:154)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.strategies.InvocationStrategy.visit(Invocatio
nStrategy.java:32)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2767)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2443)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:1812)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at com.endeca.eac.client.ScriptControlPortSOAPBindingStub.startS
cript(ScriptControlPortSOAPBindingStub.java:263)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:272)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by (#2):java.net.ConnectException: Connection refused: connect
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.socketConnect(Native Method)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.jav
a:213)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.Socket.connect(Socket.java:529)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.lang.reflect.Method.invoke(Method.java:597)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.components.net.DefaultSocketFactory.create(De
faultSocketFactory.java:153)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.components.net.DefaultSocketFactory.create(De
faultSocketFactory.java:120)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSende
r.java:191)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPS
ender.java:404)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.j
ava:138)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.strategies.InvocationStrategy.visit(Invocatio
nStrategy.java:32)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2767)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2443)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:1812)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at com.endeca.eac.client.ScriptControlPortSOAPBindingStub.startS
cript(ScriptControlPortSOAPBindingStub.java:263)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:272)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin
P.S. - ALL the endeca services are running.
To add to surprise after this , I am unable to perform the baseline update from Endeca also. I get following error while running baseline update on endeca side :
[12.19.12 15:49:23] INFO: [ITLHost] Starting shell utility 'emgr_update_set_post_forge_dims'.
[12.19.12 15:49:32] SEVERE: Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
Occurred while executing line 34 of valid BeanShell script:
31| // Upload the generated dimension values to Workbench
32| WorkbenchManager.cleanDirs();
33| Forge.getPostForgeDimensions();
34| WorkbenchManager.updateWsDimensions();
35|
36| // Upload the generated config to Workbench
37| WorkbenchManager.updateWsConfig();
[12.19.12 15:49:32] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
[12.19.12 15:49:32] INFO: Released lock 'update_lock'.
The above error persists even if I remove the application using --remove-app command and re-deploy new app with same name as previous one
Any help/pointer would really be appreciated.
Thanks,
Mayank Batra

Thanks Pankaj and Patrick.
My endeca installation works absolutely fine.
When i install endeca with platform services,mdex and tools and framework , I can create the application,initialize, load baseline and baseline update my application beautifully, until I do the baseline index from ATG side.
Once I do that , I am unable to perform indexing from Endeca also.
What I need to do is reinstall the endeca(platform services for least) to resolve this - I have been doing this for quite some time now :(
My Endeca Workbench instance is up, running and reachable on port 8006.
The PlatformServices\workspace\logs\shell\ATGen.emgr_update_set_post_forge_dims.log has following one liner :
ERROR: Could not open acquire_lock.status.
I tried running the baseline index from ATG again and following is what I get in logs this time around :
**** info Mon Dec 24 12:57:32 IST 2012 1356334052168 /atg/endeca/index/commerce/EndecaScriptService Starting script BaselineUpdate in application ATGen
**** info Mon Dec 24 13:05:03 IST 2012 1356334503729 /atg/endeca/index/commerce/EndecaScriptService Script BaselineUpdate for application ATGen finished with status Failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin --- atg.repository.search.indexing.IndexingException: Script Baselin
eUpdate for application ATGen failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.waitForScript(ScriptRunner.
java:381)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:319)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by :atg.repository.search.indexing.IndexingException: Script Base
lineUpdate of application ATGen failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.waitForScript(ScriptRunner.
java:378)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:319)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin
Regards,
Mayank Batra
Edited by: Waste Ideas on Dec 23, 2012 11:37 PM
Edited by: Waste Ideas on Dec 23, 2012 11:38 PM

Running an update statement on two dependent attributes

Dear All,
I have a repair_job table that contains values for work_cost, parts_cost and total_cost which is the sum of the work and parts cost values. I want to run an update statement that doubles the work cost and, naturally, updates the value of total cost as well. I tried to run it as:
update repair_job
set work_cost = 2 * work_cost, total_cost = work_cost + parts_cost
where licence in (
select licence from car
where year = to_char(sysdate,'YYYY')
thinking that because the update of work_cost is first on the list, the updated value of total cost would be correct. It seems however that the update of total cost happens first and then the work cost is been updated; not sure what the reason is for that and it happens no matter what the order is in the update statement.
I know that I can do it in two separate statements, or use a trigger or PL/SQL to do it but I am curious as to why it has this behaviour. Also, is there a way to do it in a single SQL statement - i.e. forcing the update of the work_cost attribute first and then that of total_cost?
I look forward to hearing from you soon.
Regards,
George

Welcome to the forum!
>
thinking that because the update of work_cost is first on the list, the updated value of total cost would be correct. It seems however that the update of total cost happens first and then the work cost is been updated; not sure what the reason is for that and it happens no matter what the order is in the update statement.
I know that I can do it in two separate statements, or use a trigger or PL/SQL to do it but I am curious as to why it has this behaviour. Also, is there a way to do it in a single SQL statement - i.e. forcing the update of the work_cost attribute first and then that of total_cost?
>
The update to all columns of the row happen at the same time - there is no order involved.
You don't need two statements but you do need to do the updates based on the current value of the columns.
set work_cost = 2 * work_cost, total_cost = 2 * work_cost + parts_cost----------
In addition to sb92075's comments in 11 g you could also just define a virtual column for total_cost and then just query it like you do now.
total_cost NUMBER GENERATED ALWAYS AS (work_cost + parts_cost) VIRTUAL,See this Oracle-base article for an example
http://www.oracle-base.com/articles/11g/virtual-columns-11gr1.php
Edited to supplement sb92075's reply by mentioning virtual columns

Blue Screen Crash Running Windows Update on Reboot

I installed Windows 7 and Boot Camp Support Software. Installation went smoothly and no problems. When I run Windows Update, it requires a system reboot; however, each time I boot into the Windows partition, I get the dreaded blue screen of death. Then on reboot, Windows runs startup repair and restores the last installation. I think the problem might be that I am installing too many updates at a single time but not sure if it's something to do with the Boot Camp partition. I deleted the Windows partition and reinstalled Boot Camp but the problem persists. Windows 7 works fine, but can't seem to install updates.

Did you get the Apple drivers installed off your OS X DVD?
Is that what you mean by "reinstalled Boot Camp" ?
Did you get Apple Software Update (in Windows of course) up to Boot Camp 3.2?
Try getting those installed before Windows updates more.
No need to 'delete' Windows partition, just do a custom clean format and install what you meant?
No need to deal with Boot Camp Assistant again, all that does is set aside and create a partition to begin with.

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process:         iTunes [5092]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [111]
Date/Time:       2011-07-26 12:08:18.568 -0500
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          504736 sec
Crashes Since Last Report:           20
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

Ti G4 PB crashes when running Software Update

I just received a Titanium PowerBook G4 800Mhz used on eBay. Has 512MB ram, 100GB Hitachi 5400rpm hardrive insalled, airport card and came freshly formatted with 10.3 installed and a CD with system patches up to 10.3.9. I reformatted the hardrive and attempted to do a clean install of 10.4 Tiger and here are my issues:
1. After installing 10.4, attempt software update, all current updates and 10.4.3 combo update, experience kernel panic in middle of update with grayed out screen and multi-language message “you need to restart your computer, hold down power button." Everytime I restart and run software update, same problem happens.
2. Restart and go to Apple’s website and download 10.4.1 manually. Installs with no problem
3. Download 10.4.2 from Apple’s site, experience kernel panic, have to hard restart.
4. Download 10.4.3 via software update, computer freezes, but after a couple of hard restarts it installs somehow.
5. With 10.4.3 installed, software update “quits unexpectedly” every time I try to run it.
6. Boot off of Hardware Test CD, run tests, everything test okay
7. Decided to install 10.3 Panther to see if problem is with 10.4
8. Reformat and clean install 10.3
9. Run software update and attempt to install all current updates up to 10.3.9, screen completely freezes during “expanding” portion of update window. Have to hard restart, same problem every time I run software update.
Well, I’m stumped. I’ve attempted everything I can think of and was up till 3am last night trying to figure this out. I’ve run Disk Warrior, reformatted and partitioned the hard drive multiple times in different ways, all with the same results. I just completely reformatted my old white iBook G3 and installed 10.4.3 with no problems, and that machine is older and not nearly as impressive as this Titanium, so it leads me to believe that there is an underlying hardware problem, or at least a firmware problem. Also, the fact that the previous owner sent the computer with 10.3 installed and a CD with individual patch updates makes me think he was aware of the problem with Software Update and wanted me to update using the CD. I don't know, I'm lost at this point. Could it be the replacement Hitachi hard drive? Bad memory? Please, any help is greatly appreciated.
Greg
Ti PowerBook G4 800Mhz 15.2" w/DVI Mac OS X (10.3) 512MB RAM (1slot), 100GB Hitachi 5200rpm internal drive

Well...
It was just a bad RAM chip. The stock 512B chip in the lower slot must have been causing the kernel panics. I took it out and put a new 512MB chip in the upper slot and everything works great now. One thing though, the replacement 144pin PC133 chip I purchased wouldn't work in the lower slot, it fit fine although it wasn't as tall as the stock chip. Installed in the lower slot, the Ti Book would make three beep error sound and not start up. Can anyone tell me why it would work in the upper slot and not the lower? Your input is appreciated
Greg

While running an update in Itunes i received an error message - Unable to locate component because AVFoundationCF.dll was not found. Then Itunes was not installed correctly. Error 7 (windows error 126) Do I have to reinstall and will I loose all my music?

While running an update in itunes (not installing), it stopped in the middle of the update and i receceived the following messages:
Application failed to start because AVFoundationCF.dll was not found. Reinstalling itunes may fix the problem. Then "itunes was installed incorrectly. Please reinstall itunes Error 7 (Windows error 126)". If i uninstall and reinstall itunes will I lose all of my music, etc.?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Macbook will not boot up after running Software Update

My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?

Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

Macbook air is stuck in a reboot loop after running Software Update. It looks like a firmware update is failing.

I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes. It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and shutting down.
I can start the restore partition, and the system appears to function, but I cannot figure out how to abort this failing update so I can use my system, and determine which update is breaking it and why. I've tried resetting the firmware, but that didn't change anything.
There's nothing, not even a the CD drive plugged into the Air, so it's not a peripheral problem.
I could restore from backups, but that seems like a very brute force way to get rid of a firmware update loader.
Does anyone know how to disable these little beasts?

Restart the Air while holding down the shift key, this is safe mode. Once in to the login screen, login then hold the shift key again. It will disable login items, which can be the cause of startup problems. Remove all your login items from your user accout and try a restart (Note the login items if you need to re-add essential ones later). If it all works well, then keep an eye on third party startup items, they will cause you grief!

Please help!!! Cannot run Windows Update in Win 7 Pro after changing new hard-drive. (X201s)

Hi everyone,
I have been using my thinkpad x201s for more than one year by now. And recently I change a new and larger hard drive for my laptop. When I tried the thinkpad rescue and recovery disc on the new hard drive, everything works fine except that I cannot run Windows Updates after the installation was finished. The recovery DVDs were burned directly from the original image stored in the computer when the first I received my laptop last year.
Every time when I try to run the Windows Update, it shows the following: "Windows Update cannot currently check for updates, because the service is not running, you may need to restart your computer."
I restarted my computer later but nothing changed. Can't run Windows Updates and can't even install IE9.
I then moved back to my old hard drive and everything is normal, no problem with Windows Updates. I also tried to create a back-up image by running win 7 Backups and Restore. Later when I changed back to the new drive and followed the instructions to restore my system from the image I created earlier in a USB drive, it worked except that still the system can't run Windows Updates program.
I'm now getting very confused and upset, is it something to do with the software copyright? It's been a week now and I tried to Google the similar problem but no solutions work here. All I want to do is moving my current system to the new hard drive so that I can continue to use my laptop but it just failed updating every time.
Could anyone kindly tell me what to do when changing hard drive in order to avoid the problem I'm dealing with? Sorry I'm not a pro type user and just want my laptop to work appropriately.
My warranty has already expired so I guess the Lenovo Technical Hotline wouldn't answer my questions anymore. Please help!! Much appreciated.
Thanks so much in advance!!

I'm not sure this is the issue, but from your description, it seems as though all you have to do is activate the windows update service. If I were you, I'd search for "Services" in the start menu, open it and look for "Windows Update". Check in its properties that it is set to "Automatic (Delayed)", if it isn't, set it, and start the service, you should then be able to check for updates, be careful though that none of your other programs aren't stopping the service, usually these programs are there to "optimize your performance" or "boost your system",...
Hope this helps.

HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

ITunes wont run after update today says missing file msvcr80.dll

iTunes wont run after update today says missing file msvcr80.dll
tried to reinstall, nothing changed.

Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562

HT5244 Is there any way to find out after(!) running die Update, if i have been infected?

Is there any way to find out after(!) running die Update, if i have been infected?

Run any one of these tools: http://reviews.cnet.com/8301-13727_7-57413811-263/flashback-malware-removal-tool -roundup/
Or you can check manually: http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/

Replaced NIC and cannot run Windows update

Greetings - I disabled the onboard NIC and installed a Intel Gigabit CT PCI-E Network Adapter EXPI9301CTBLK. On reboot, Win7 found the NIC and everything appeared to function normally.
However, when I try to run Windows Update or update Windows Defender, which worked the previous day, I get the error code: 0x80248007.
I updated the NIC driver to Driver_Version: Driver ver 12.7.27.0 date: 5/15/2013 - No help.
I ran the fixit tool from - http://support.microsoft.com/kb/958046/en-us - No help.
I renamed the folder SoftwareDistribution/Download folder to Download.old - No help.
I asked Intel Support if they were aware of this - They suggested contacting Microsoft.
OS: Win7 Pro 64bit
I suspect the NIC is causing the the problem obviously and hate to remove the NIC. Anyone have a suggestion on how to resolve this?
Thank you

Hi,
According to the error code, this problem occurs when some files in the Windows Update are missing, or when the Microsoft Software License Terms cannot be located by Windows Update.
Microsoft already provide a fixit tool to fix this problem and you can refer to the link below to download and intall it to fix this problem for test.
Windows Update error "0x80248007":
http://support.microsoft.com/kb/958046
Roger Lu
TechNet Community Support

Running sa-update on 10.4.11

Similar Messages

Maybe you are looking for