Running Server 2012 Essentials Edition without Essentials Role?
We have been running into Line of Business (LOB) applications in the small business sector showing incompatibilities with the Essentials Role, where as the LOB developer requires to run a 10 user office on Standard Edition without Essentials Experience turned.
There are now a number of LOBs that I know of for what I can tell, use legacy database engines, that have made this their system requirement.
Is it possible to turn off the Essentials Role inside the Essentials Edition and still run other roles like DC, DHCP etc.?
thanks, Volker
Volker
No real clue if it will break if you remove the role. If I had to guess I would say yes. But I am not sure how removing the role will fix the LOB unless perhaps it is web based and needs 443.
Thank you for your reply, but if you look it is possible to remove the Essentials Role in the Essentials Version, my question was what does that do? Does
it become a Standard Version with up to 75 CALs, just no Essentials (SBS) tools?
Just curious, you think that would be legit? Turn a 400$ product into an 800$ product by uninstalling the role?
Grey
Similar Messages
-
Running two instances of Windows Server 2012 Essentials R2 on the same domain
We have Windows Server 2012 Essentials R2 running as a domain controller -- and have installed another licensed copy of the same thing on the same domain. We want to use the 2nd server for running an LOB application and provide backup for the
AD services.
The 2nd server is a member of the domain. Can I do this and have the 2nd server provide AD failover services like they do with 2012 Standard?Two things to consider. In the XP and 2003 era, the OS was not written in a security-first fashion. While XP did have LUA, almost nobody used them. Then came Vista and UAC, and those prompts were a major pain point because nobody wrote for security. Fast
forward 6 years and standard accounts are a normal best practice. Almost nobody in business recommends running daily tasks as administrator.
I mention all this to illustrate that, similar to admin accounts, what you used to get away with no longer applies. Running LOB apps on a DC is just bad. Many times, the app just doesn't work. But even if you could get it to work, it is a terrible idea.
If the stories of Home Depot, Target, and most recently Sony don't already give it away, I'll spell it out. We no longer live in an age where you can take shortcuts and expect to be safe. Large organizations make national news when they screw up. But small
businesses are targeted just as often and are at just as much risk. From "leaking" their client info to having their data held for ransom, the small business is abused regularly, but never makes national news because they are, by definition, small.
If you can take simple easy steps to help minimize that risk, such as keeping a domain controller free of other software and locked down, then it is almost unethical to do Otherwise in the modern computing era. The world ha changed. It is our responsibility
as I.T professionals to change with it. That's why we get to call ourselves "professionals" in relation to I.T.
So, what bad things? Risking the customer's very livelihood. I consider that pretty darn bad. -
Server 2012 Essentials Active Directory users
I am in the process of setting up a small business with 40 users and 12 workstations, most of the users will be working in a client site on they workstation and some will have access to anywhere access. I'm aware of essentials limited to 25 users, my question
is can I only create 25 AD accounts or can I create 40, as all 40 users will not require concurrent access at sny given time?Hi,
à
when you say Essentials role experience is included, does this include Remote Anywhere feature in Essentials?
The Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server
2012 R2 Datacenter. When you install the Windows Server Essentials Experience role, you can take advantage of all the features that are available to you in Windows Server 2012 R2 Essentials without the locks and limits enforced in it. Windows Server Essentials
Experience role enables you to
use the Anywhere Access functionalities on the server (such as Remote Web Access and virtual private networks) to access your server, network computers, and data from remote locations in a highly secure manner. For more details, please refer to following article.
Windows Server Essentials Experience Overview
For configuring Anywhere Access functionalities in Windows Server Essentials, please refer to following article
and check if can help you.
Manage Anywhere Access in Windows Server
Essentials
By the way, if only have Windows Server 2012 Essentials, there are two scenarios in which Windows Server 2012
Essentials can be used in environments with more than 25 users. For more details, please refer to following article.
Using
Windows Server 2012 Essentials with more than 25 users
However, as Cliff and diramoh suggested,
Windows Server 2012 R2 Standard with the Windows Server Essentials Experience role installed will be a better option.
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu -
What are the options and/or limits for running SQL server (Standard or Express, 2012 or 2008 or 2005) on Server 2012 Essentials? Thank you.
Most best practice is that it is not a good idea to run SQL on a DC. However, I am not aware of any negatives, other than the disclaimers about it being a DC and possible RAM or I/O issues. Were possible, I would use Express as it is
a LOT less expensive and requires fewer resources. It was only a generation or two ago that SQL and Exchange and ISA server all ran on "the" DC and could not be relocated by EULA, for up to 75 users.
From this document:
http://www.microsoft.com/en-us/server-cloud/windows-server-essentials/default.aspx
Follow the Learn More at the bottom, for a pdf that reads, in part:
Q: What applications can I run on Windows Server 2012 Essentials?
A: Almost all Windows Server 2012 applications should run on Windows Server 2012 Essentials. Windows Server
2012 Essentials differs from Windows Server 2012 primarily in that several of the roles and features of Windows
Server are automatically installed and configured according to best practices for a small business environment. In
some cases, an application that is designed to run on Windows Server 2012 may require that specific roles and/or
features are not enabled. See the manufacturer’s product information for specific details.
Do NOT take what I am about to say as gospel... I am NOT a SQL expert. But imo, the reason to not run SQL server on the DC is that it is busy enough and in an AD enviornment where there are potentially thousands of users the server would be too busy
servicing those requests to be a good candidate for SQL. But in network of 25 users or less..... ??
Larry Struckmeyer[SBS-MVP] -
How can I upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials?
I have just installed Windows Server 2012 Essentials on my Home Network (from the installation DVD). I have done absolutely no configuration Installing Server 2012 was an oversight; I meant to install Server 2012 R2 Essentials.
I tried to correct by installing R2 from its DVD, hoping it would do an upgrade. That didn't work.
Is there a simple way to make it possible to install the correct OS? For example, can I just demote the existing server and remove any roles that were installed, so that the R2 disk will install over top of the existing installation?
Alternatively, is it safe to just reformat the partition and install R2?
http://technet.microsoft.com/en-us/library/dn408635.aspx seems to imply that this is OK.
David Pike, P.Eng, MCITPHi Larry. Thanks for the reply. It didn't work, but I don't believe you are wrong. Rather I think there is something weird in my system. I'm marking your reply as answer.
Some background: I'm repurposing an older PC (Compaq SR1614X) as a home server, to manage my home network, use as a gateway to my Azure server, and to help my Server 2012 training (on MVA). I've been messing with it for nearly two months,
on and off. From the start, I've had trouble installing the server 2012 software (see previous threads August-27 and August-16
), but when I got to the point that I could install Server 2012 Essentials, I thought I could upgrade to Server 2012 R2 Essentials exactly as you suggest. That was where you helped me a lot, i.e. you confirmed that my expectations were reasonable.
So when it didn't work, I spent most of yesterday trying various different procedures. I got tantalizingly close, but still no cigar.
I can install any Windows Client and Server 2012 Essentials, but the R2 Essentials installation never finishes; it goes into an "error 0x000000C4" boot loop. At first I wondered if it was because I was installing a server over a
server, but you confirmed that's not the issue. I later verified that I cannot install R2 over Windows 7 either, whereas R1 over Win7 is fine. I can only surmise one of two problems:
I have a bad installation disk
There is a hardware issue
I plan to eliminate (1) by creating a new disk from a new download. I have verified that the latest ISO file and the one I have been using have identical byte counts,
For (2), I had suspected that the problem was that the older system has no UEFI, but since R1 installs OK, I am discounting that. Today's effort: to eliminate the DVD drive, I will try booting from a Flash Drive. To eliminate
the hard drive, I will try installing to a different drive.
I am hoping you can help with one more thing. When I run setup.exe with the /noreboot option, I have a better chance of success. The option suppresses the first reboot only, but that one (after "Expanding the setup files") always
fails, so suppressing it gets me almost to the end of the install. Is there a way to modify setup.exe so the it always runs with the /noreboot option? -
Cannot enable anywhere access in Server 2012 Essentials R2
Hi all,
I have recently installed & setup Windows Server 2012 Essentials R2 on Lenovo S20. Everything is going great except for Anywhere Access! I previously had Server Essentials 2012 running on a HP Microserver but the hardware desperately needed upgrading
& when R2 came out I grabbed my opportunity. I did not do a migration as I only needed to copy my data. I have everything else set up, i.e. AD DNS, DHCP etc etc & all required roles installed but when I access the dashboard Anywhere Access wizard the
server says it is switched off, so, I go to set up & skip domain name setup as I already have one setup through MS & skip router setup as my ports are already forwarded & the server handles all DNS & DHCP anyway. Click on next & tick anywhere
access ( have tried with VPN too) & next then click allow current users & groups etc & next again, then the setting up remote desktop box has the green bar scrolling across & that is as far as I get. I have tried multiple times & it never
goes any further, I have even left it for over 48 hours!! The only option left is to cancel which it does OK.
I have trawled the internet for answers but cannot find anything similar to my problem. As I say, everything else is OK, local computers connect & see the file structure OK. It is just this anywhere access problem. Any help would be greatly appreciated
as I do sometimes need to access certain files while away from my premises. I think I have mentioned everything but if you need any more info please ask. I am pretty new to servers & still have a lot to learn but am getting there slowly!!
AnthonyOK my friend has so far had no luck in finding a problem :(
I have looked at the logs suggested but I have to be honest they mean very little to me. I have a Dashboard.log & a SharedServiceHost-ManagementServiceConfig.log which it says was last updated on 7th Dec but I also have another of those logs which ends
in .2.log so it's full name is SharedServiceHost-ManagementServiceConfig.2.log is this right? That one has been updated today.
I have uploaded a logs.zip file to my Skydrive space if anybody would be good enough to have a look & tell me what I should be looking for? The link is: Logs.zip
Thanks for you advice so far -
How to solve the error 0x80073701 in Server 2012 Essentials?
Good afternoon, I have a big problem when trying to add some roles or features on my Server 2012 Essentials get the error 0x80073701, in my case I am trying to install telnet client and server, but to see if the problem was with them already tried other
roles and features and also the error remains. I thought it was some evil update installed and uninstalled all and the error continues.
Tiago Pinheiro - MCPHi Tiago,
Would you please let me confirm whether the Windows Server 2012 Essentials is migrated from
Previous Versions or a clean install? Just a confirmation, thanks for your understanding.
On current situation, please use the following tool to check the integrity of the .NET Framework.
.NET Framework Setup Verification
Tool User's Guide
Please also use
Install-WindowsFeature PowerShell command and check if help you to install Roles and Features on the Windows Server 2012 Essentials successfully.
In addition, Please follow the path: C:\Windows\Logs\CBS and check CBS log file if find more clues.
à
get the error 0x80073701
By the way, the error seems that mean there are some system files are missing, which caused the installation
failure. If it’s not a production environment, maybe consider that run
sfc /scannow command to scan all protected system files and monitor the result.
Please Note: since it’s a Windows Server 2012 Essentials, the web configuration file may become corrupted when you run the SFC command. For more details, please refer to following KB.
The web configuration file may become corrupted when you
run the SFC command in Windows Server 2012 Essentials
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
SQL Server 2012 Express SP1 will not install on Windows Server 2012 Essentials R2
I have been attempting to install SQL Server 2012 with SP1 Express Edition for about a two weeks and have been unsuccessful. My organization recently purchased a new Dell PowerEdge T320 Server (64 Bit) with Intel Xeon Proc.-E5-2420; 2.2Ghz, 32 Gb RAM,
1 Tb RAID 5 H/D, and Windows Server 2012 R2 Essentials (preinstalled). The server will be configured as an on premises server. We are running a small church management application that requires SQL Server 2012 SP1 Express. Per the direction
of our application vendor, we downloaded the SQL Server 2012 SP1 Express file (SQLEXPRADV_x64_ENU.exe) from the Microsoft SQL Server Website. We ran the file "As Administrator" and the SQL Server 2012 Setup program began.
We selected New SQL Server Stand-Alone Installation, successfully installed the needed Product Updates, and accepted the MS SQL Server 2013 Express License terms.
When the Feature Selection Page appeared we checked only the "Data Base Eng Services". The
Instance Configuration Page was displayed and we inserted a "Named Instance= Shelby",then pressed next. On the
Server Configuration Page the only change was setting the "sql server browser = automatic". The Database Engine Configuration Page appeared
and we inserted the following settings:1] Server Configuration Tab; a) mixed mode, b)inserted SQL Server Admin pswd, c) added current user as administrator: 2] Data Directories Tab; default/no changes: 3] User Instanced Tab; default/no
changes: and 4] Filestream Tab; default/no changes. Next the
Reporting Services Configuration Page came up and the reporting services native mode was set to
"install and configure". The Error Reporting Page appeared and was left as the
"default". The SQL Server 2012 Setup program proceeded to Installation Progress Page and started to install. Just before the install program ended it displayed a message saying that there
were errors and the Database Eng Services did not succeed. I uninstalled SQL Server 2012 SP1 Express three (3) times, ran Windows Update after every uninstall, attempted to install the Database Engine and got the same results. Are there any patches or
special procedures for correctly installing SQL Server 2012 SP1 Express on my hardware configuration or Windows Server 2012 Essentials R2? Any insight would be greatly appreciated.Can you post the setup Summary and detail logs, which will help to figure out the problem? The details about the location can be found at https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Satish Kartan www.sqlfood.com -
Does the TRIAL VERSION of server 2012 essentials support the 'install for migration mode' ?
Hello,
I’m in the process of preparing a transition (migration if you like) from an SBS 2003 environment to a Server 2012 Essentials DC, and separate Exchange platform.
I started with this document http://technet.microsoft.com/en-us/library/jj200112.aspx
I clearly states to Install Windows Server 2012 Essentials in migration mode
In order to transfer the DC role tot the new server.
I’m Using the 180 TRIAL VERSION of windows server 2012 Essentials to test if this will work. The thing is…. I did not get the question to install the server (or run it) in MIGRATION mode !!
Does the TRIAL VERSION enable you to utilize this migration mode or not ?
Thank you,You might ask them over here.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserveressentials&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Windows Server 2012 Essentials (not R2) - all client computers offline
The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: 00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon. -
Server 2012 Essentials Restore files not working
I have a brand new install of server 2012 essentials running on hyper-v. have connected 4 test computers using the essentials connect method, 7 Pro and 8.1. backups are working daily with no errors. thought I would test a restore and I am getting the
message, "Restore Files and Folders wizard has stopped working.
unfortunately this is the very first time I tried a restore so I can't say if any updates are the issue.
anyone else had similar issue?2 errors
Log Name: Application
Source: .NET Runtime
Date: 2/19/2015 1:31:20 PM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Windows8Eval.xxxxxxxxxxx.com
Description:
Application: MountBackupWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Delegate.DynamicInvokeImpl(System.Object[])
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at Microsoft.WindowsServerSolutions.DataProtection.UI.Program.Main(System.String[])
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-19T18:31:20.000000000Z" />
<EventRecordID>1224</EventRecordID>
<Channel>Application</Channel>
<Computer>Windows8Eval.xxxxxxxxx.com</Computer>
<Security />
</System>
<EventData>
<Data>Application: MountBackupWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Delegate.DynamicInvokeImpl(System.Object[])
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at Microsoft.WindowsServerSolutions.DataProtection.UI.Program.Main(System.String[])
</Data>
</EventData>
</Event>
2nd error
Log Name: Application
Source: Application Error
Date: 2/19/2015 1:31:21 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Windows8Eval.xxxxxxxxxxxx.com
Description:
Faulting application name: MountBackupWizard.exe, version: 6.3.9600.16384, time stamp: 0x5215cf3c
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0xac
Faulting application start time: 0x01d04c723d6d8d89
Faulting application path: C:\Windows\System32\Essentials\MountBackupWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 7fa0d5c8-b865-11e4-8258-080027e87958
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-19T18:31:21.000000000Z" />
<EventRecordID>1225</EventRecordID>
<Channel>Application</Channel>
<Computer>Windows8Eval.xxxxxxxxxxx.com</Computer>
<Security />
</System>
<EventData>
<Data>MountBackupWizard.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215cf3c</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>e0434352</Data>
<Data>0000000000008b9c</Data>
<Data>ac</Data>
<Data>01d04c723d6d8d89</Data>
<Data>C:\Windows\System32\Essentials\MountBackupWizard.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>7fa0d5c8-b865-11e4-8258-080027e87958</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event> -
Windows Server 2012 Essentials not listed in EasyStartup 3.8.1d for TS140
Recently purchased a TS140 (70A4 001RUS). Came factory installed RAID 1 with Windows Server 2012 Essentials pre-installed. Needed to reinstall, however:
- Windows Server 2012 Essentials does not show up in EasyStartup 3.8.1c DVD that came with server
- Downloaded latest EasyStartup 3.8.1d and created bootable DVD and ran with same result
- "Windows Server 2012" is listed (but not Essentials). Running this installation, it does not recognize the Windows Server 2012 Essentials External Recovery DVD that came with server. Continually asks to insert "Windows Server 2012" disk.
- "Windows Small Business Server 2011 Essentials" is listed (but not 2012 Essentials). Running this installation, it does not recognize the Windows Server 2012 Essentials External Recovery DVD that came with server. Continually asks to insert "Windows Small Business Server 2011 Essentials" disk.
- Have booted using UEFI, Legacy and Auto with no difference
- Ran lastest Firmware Updater v1.8.1013 - no updates listed as required
- Have updated BIOS to latest 70A
- Server will also not boot directly from Windows Server 2012 Essentials External Recovery DVD (dvd is set 1st in boot order in bios)
- Windows Server 2012 Essentials External Recovery DVD is readable on other machines - can copy to bootable USB key and run regular Windows installation on server (this is current workaround)
- using the above workaround, drivers must be installed manually.
- EasyStartup 3.8.1d Readme specificly lists Windows Server 2012 Essentials as supported on the TS140 in UEFI and Legacy mode here
As mentioned, the above workaround can work. However, this server may not always be maintained by myself and I would prefer the supplied software to acutally work properly for ease of use by others in the future.I have several TS140s running WSE 2012 R2. Like you said, the easystart does not recognize properly the WSE R2 os, so I just did the basic from disc or USB install after I configured the boot drives or RAID1 array.
The main reason to load the easy start is for drivers, however WSE found and recognized all the hardware in the unit. -
Windows Server 2012 Essentials r2 installed in a hyper-v
I have a virtual host running Server 2012 r2 with Hyper-V enabled and I would like to install Windows Server 2012 Essentials r2 in a virtual environment. The installation starts from a cd and when doing so I receive an error message that says "A media
driver that your computer needs is missing....."
I have successfully install Server 2012 Essentials (not r2) in the same virtual host. Why am I getting this message?Hi,
I’m glad to hear that you have resolved the issue and thanks for sharing your solution in the forum. This will help others who face the same scenario resolve the issue quickly. If there is
anything else I can do for you, please do not hesitate to let me know. I will be very happy to help.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Can't download files on Android from Server 2012 Essentials Remote Web Access
I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011. Employees like using Remote Web Access to log in from anywhere and have access to shared folders. It works perfect on a Desktop computer, but when they try to
use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails. When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
separately to make this happen?
I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
but eventually after a few minutes, will time out and show "Download Unsuccessful".
Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
UPDATE: I found this in the event handler when I tried to download something from a mobile device...
- System
- Provider
[ Name] ASP.NET 4.0.30319.0
- EventID 1309
[ Qualifiers] 32768
Level 3
Task 3
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-01-12T16:49:12.000000000Z
EventRecordID 72818
Channel Application
Computer MYSERVER.MYDOMAIN.local
Security
- EventData
3005
An unhandled exception has occurred.
1/12/2014 11:49:12 AM
1/12/2014 4:49:12 PM
953eedf1ad414391a193e5f98a281da5
263
3
0
/LM/W3SVC/1/ROOT/Remote-1-130340167702975633
Full
/Remote
C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
MYSERVER
2592
w3wp.exe
NT AUTHORITY\NETWORK SERVICE
HttpException
Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
/Remote/fs/MobileDownload.aspx
MY.IP.ADDRESS.141
MYDOMAIN\user
True
Forms
NT AUTHORITY\NETWORK SERVICE
31
NT AUTHORITY\NETWORK SERVICE
False
at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)Hi,
Before going further, would you please let me confirm something firstly?
Would you please let me know if all Android devices
encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
the Android device, will still fail to download?
Please check if there has enough free space in Android devices that be used to save download.
When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
it can find. Then monitor the result.
Run the Windows Server 2012 Essentials Best Practices Analyzer
http://technet.microsoft.com/en-us/library/jj200181.aspx
In addition, regarding to the Event ID 1309, please refer to the following articles.
Event ID: 1309 Source: ASP.NET 4.0.30319.0
http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
Hi All, I am trying to create a ABC Model in the Data Mining and make it run through Analysis Process Designer. I created the source for the Data as a BeX Query, and when I am trying to assign a Variant for the same, it simply doesn't allow me to. No
-
I am building a VC demo that uses a tab to display a table of search results. After clicking on a line in the table I would like to trigger an action to go to the next tab on the page which will contain the search results. I can do this using transit
-
xxxxxx
-
How to move from one family plan to another within Verizon?
My son currently is part of one family plan we have which is for non-smart phones. It is a really old plan and a really old phone. I also have another family plan (share everything) for my Galaxy S3 (no other people on that share everything plan ye
-
AddRecord error when adding binary object
Hi all, I am getting a2i.core.StringException: AddRecord error when trying to add binary object in the repository using Java API. The code used is as below: //Adding values in binary table byte[] fileBuf = file; A2iFields fields = new A2iFi