Running slow, running slow, running slow
Running very slow. HAve to re boot several times a day as well as force quit many applications. Constant spinning wheels. Have used Disk Utility several times but really doesn't seem to help much. Ideas please. Thanks.
buy a new mac
Similar Messages
-
Application running slow in ver 1.5, 1.6 but not in 1.4
We have a application that was running very slow when we used any version sun java instead of MS java in IE6 SP2.
I removed MS Java from IE and installed Sun java 1.4.2_16 and the applications starts in under 10sec's.
But we had to test the other version of java as well, i then installed the other versions from 1.5 update 14 to 1.6 update 4 and the application takes about 30 to 40 sec to load the web page.
I then looked at the development version of java 1.6 update 10 and version 7. In 1.6 update 10 the application would load but would not refresh the applets it would just hang. In version 7 the application would not start up at all.
In all the versions i increased the memory parmeters from 128 to 256 and in version 1.6 i changed it to -Xmx300m as well but still the application was slow loading. Removed all the versions and reinstalled 1.4.2_14 and the application works fine and loads up under 10 sec.
Does any one have any idea why this is happening.
IE 6 sp2
XP sp2 been used.You should try profiling the startup code.
As a first go around, you might try getting a stack trace during the startup process and look for locks (see jstack).
If your application is built on Swing, it's my understanding that the later versions of Java are more strict about use of the Event Dispatch Thread--pay particular attention to activity off the EDT locking the thread. -
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
MacBook Pro Lag, running slow and to much time to start.
Hi
Need some help, my MacBook Pro is running slow it takes like 10 - 13 minutes to start, most of the times when I'm going to type something, it doesn't matter which app do I use (Facebook, messages, search on google, it get stuck once in a while and the beach ball appears for a few seconds and then works again, or when I navigate between apps and tried to click on something it takes a while and beach ball comes up I just reinstalled OS X Yosemite again and ran CleanMyMAc and got almost 2 gb deleted, but still the same problem, I use this computer for work on java apps. I ran the EtreCheck and this is the result. Any help on how to kill spotlight? or any suggestions??
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 10:26:47 AM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 52
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.3 (14D131) - Time since boot: 2:43:28
Disk Information: ℹ️
APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (725.60 GB free)
Encrypted AES-XTS Unlocked Converting
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Microsoft Microsoft Nano Transceiver 1.1
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac3.Agent.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac3.Scheduler.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Spotify Application Hidden (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 75 Check version
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
136% Spotlight
13% WindowServer
5% Safari
4% SpotifyWebHelper
3% NotificationCenter
Top Processes by Memory: ℹ️
318 MB java
163 MB com.apple.WebKit.WebContent
137 MB mds_stores
137 MB Google Chrome
129 MB Mail
Virtual Memory Information: ℹ️
484 MB Free RAM
3.83 GB Active RAM
3.24 GB Inactive RAM
1.03 GB Wired RAM
2.45 GB Page-ins
213 KB Page-outs
Diagnostics Information: ℹ️
Apr 14, 2015, 07:42:25 AM Self test - passed
Apr 13, 2015, 03:18:21 PM /Library/Logs/DiagnosticReports/CleanMyMac 2_2015-04-13-151821_[redacted].cpu_resource.diag [Click for details]Hi
Need some help, my MacBook Pro is running slow it takes like 10 - 13 minutes to start, most of the times when I'm going to type something, it doesn't matter which app do I use (Facebook, messages, search on google, it get stuck once in a while and the beach ball appears for a few seconds and then works again, or when I navigate between apps and tried to click on something it takes a while and beach ball comes up I just reinstalled OS X Yosemite again and ran CleanMyMAc and got almost 2 gb deleted, but still the same problem, I use this computer for work on java apps. I ran the EtreCheck and this is the result. Any help on how to kill spotlight? or any suggestions??
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 10:26:47 AM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 52
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.3 (14D131) - Time since boot: 2:43:28
Disk Information: ℹ️
APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (725.60 GB free)
Encrypted AES-XTS Unlocked Converting
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Microsoft Microsoft Nano Transceiver 1.1
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac3.Agent.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac3.Scheduler.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Spotify Application Hidden (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 75 Check version
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
136% Spotlight
13% WindowServer
5% Safari
4% SpotifyWebHelper
3% NotificationCenter
Top Processes by Memory: ℹ️
318 MB java
163 MB com.apple.WebKit.WebContent
137 MB mds_stores
137 MB Google Chrome
129 MB Mail
Virtual Memory Information: ℹ️
484 MB Free RAM
3.83 GB Active RAM
3.24 GB Inactive RAM
1.03 GB Wired RAM
2.45 GB Page-ins
213 KB Page-outs
Diagnostics Information: ℹ️
Apr 14, 2015, 07:42:25 AM Self test - passed
Apr 13, 2015, 03:18:21 PM /Library/Logs/DiagnosticReports/CleanMyMac 2_2015-04-13-151821_[redacted].cpu_resource.diag [Click for details] -
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5? I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5? I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.
-
My MacBook Pro is running very slow recently
Hello,
I bought a MacBook Pro about a year ago for school, and everything was perfect until about three days ago. I woke up one morning, and used my laptop to do simple stuff like browsing the Internet, check Facebook, etc, and then went to class. When I came home later in the day, and tried to use my laptop, it was incredibly slow.
Firefox was taking minutes to load, and the pages that I'd usually browse in seconds would take much longer than normal to load. The spinning beachball was a constant companion whereas before, I hardly ever saw it. It isn't only Firefox that is slow to load, but other apps like Word, and even Finder takes a long time to get going.
I've done some searching on my own to try and find the cause of this problem, but there has been no solution. To save everyone the time, I've done the basic things like opening my Activity Monitor and checking for any programs that are taking up abnormal amounts of space. Here's the information from AM:
CPU:
% User: 0.63
% System: 5.75
% Idle: 93.62
System Memory:
Free: 2.38 GB
Wired: 1.14 GB
Active: 440.0 MB
Inactive: 38.5 MB
Used: 1.61 GB
4GB RAM
I've got 444 GB of 499.24 GB free, so it can't be a lack of space.
I've sorted everything in my "All Processes" tab by Real Mem, and the largest user of memory is kernel_task, but that can't be the problem with my laptop. Other than that, there are no programs or applications that take up an absurd amount of space.
I've also gone and repaired my disk under Disk Utilities, and it said that everything was okay, and nothing was out of the ordinary.
My caches have been cleared from both Safari (which I haven't used since I download Firefox) and Firefox. I even went ahead and reset my Firefox just to make sure nothing was being overlooked.
I've backed up all my important notes and documents into an external harddrive, so I'm not worried about losing any important data.
I logged into my guest account to check if there was just a program in my main account that was making it slow, but things took a long time to load on that account, too, so I'm thinking this is more of a hardware issue.
The OS is up to date, but when I tried to install Mavericks it froze right at the end and said there was an error, and to reinstall it from the App Store. I should note that I updated the OS and installed Mavericks after the laptop began acting up, not before, so I wouldn't think either are responsible for this slowness. Currently I'm using OS X 10.8.5.
Spotlight isn't doing any indexing, so that isn't a cause of this either.
So now I'm stuck on things to do, nothing stands out to me as irregular, and the MacBook itself doesn't make any loud, unusual noises when I'm on it.
Any help would be appreciated, if nothing can be found then I'm just going to take my laptop into a shop to get it fixed.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2) -
Dear Team
I am using window 8.1 Pro & office 2013 ,which is running very slow in system , kindly suggest me what should i do regarding this problem
Regards
Saurabh
Cont No-9997255621I had a similar issue with 8.1 early on, looked at task manager and disk was at 100% most of the time upgraded to a newer Hard drive problem was solved, the first hard drive was a slower and smaller cache drive.
-
FCP 6.0.1 Running and previewing extremly slow
Ever since I upgraded to 6.0.1 FCP is running extremly slow.
In my current project, I brought in a HDV QT.mov that needed to be Chroma Keyed and color adjusted. Previewing the chroma keyed file looks horrible (all jagged) unless I render it. That takes time. Then I added a piece of stock DV footage under that, blurred the background and it played back like crap until I rendered it. More time. And so on.
I can't make any adjustment and see how it looks without rendering.
When I was working in 5.1 FCP I was able to add all type of files and zip right through them pretty much. Now I can't seem to get my settings right or something...so as I apply different effects or filters I can never see on the fly how it looks without rendering it first. Then of course...if it's not right...I tweak it again but can't see how that looks until I render it again.
All my video files resides on a RAID that I created from 2 of my internal drives and it also is my scratch & render disk.
It's eating my lunch on production time.
Any suggestions Please.You could try setting the render in the sequences you work with to ProRes. Found in that sequence setting's video processing tab.
But the real fix is to not work in HDV at all. If you have an Intel mac, a capture card like the Kona LHe card will transcode your HDV directly to ProRes... or AJA's Io HD (at the high end of this workflow) will transcode the HDV to ProRes on board the box itself... The Io will take your HDMI signal directly from the camera and transcode it to anything. It starts shipping any day now.
You're a brave soul attempting chroma keys with HDV... they are nigh on impossible to look good. But ProRes will make the rendering times go way down, and give you more real time playback of effects.
Jerry -
Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?
Adobe CC applications are very large and the base Mac mini isn't a good choice because it has only 4GB of RAM and has a slow standard hard drive. To get the most out of ACC you should upgrade the mini to at least 8GB. I'd also choose an SSD or Fusion drive for better performance.
-
Been experiencing severe slowness and lock-ups with Firefox of late, which ends with a sudden drop in memory usage and me having to repeatedly shut it down through Task Manager. I have created a new profile and disabled hardware acceleration. I have tried disabling all plug-ins and extensions, yet I noticed that at times (not always) plug-in container was still an active process, which I don't understand. Why would it be active when there are no enabled plug-ins? I also noticed that when plug-in container is not active (showing under Processes in Task Manager) I do not have this problem and Firefox runs normally? I need to block plug-in container. Please help.
I have just tried on Windows 7 and used process explorer on that. I would expect the results to be displayed in a similar manner on Windows XP.
Plugin-container is shown as being run from Firefox, and in turn if I mouse over or left click the line for plugin-container .exe then under ''command line'' it tells me what is running, in my case at this instance it is Flashplayer and so it displays
.... \Macromed\Flash\NPSWF32_12_0_0_77.dll .... plugin ....
It is identifying it is FlashPlayer
The worry with your apparently unknown operation is that within the plugin-container it may be safe but if plugin-container is disabled maybe it could be malware and cause a problem. -
My mac takes a long time to log on, running slow
my imac is running slow & takes a long time logging on, anyone knows why this happens?
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message. -
PL/SQL procedure is 10x slower when running from weblogic
Hi everyone,
we've developed a PL/SQL procedure performing reporting - the original solution was written in Java but due to performance problems we've decided to switch this particular piece to PL/SQL. Everything works fine as long as we execute the procedure from SQL Developer - the batch processing 20000 items finishes in about 80 seconds, which is a serious improvement compared to the previous solution.
But once we call the very same procedure (on exactly the same data) from weblogic, the performance seriously drops - instead of 80 seconds it suddenly runs for about 23 minutes, which is 10x slower. And we don't know why this happens :-(
We've profiled the procedure (in both environments) using DBMS_PROFILER, and we've found that if the procedure is executed from Weblogic, one of the SQL statements runs noticeably slower and consumes about 800 seconds (90% of the total run time) instead of 0.9 second (2% of the total run time), but we're not sure why - in both cases this query is executed 32742-times, giving 24ms vs. 0.03ms in average.
The SQL is
SELECT personId INTO v_personId FROM (
SELECT personId FROM PersonRelations
WHERE extPersonId LIKE v_person_prefix || '%'
) WHERE rownum = 1;Basically it returns an ID of the person according to some external ID (or the prefix of the ID). I do understand why this query might be a performance problem (LIKE operator etc.), but I don't understand why this runs quite fast when executed from SQL Developer and 10x slower when executed from Weblogic (exactly the same data, etc.).
Ve're using Oracle 10gR2 with Weblogic 10, running on a separate machine - there are no other intensive tasks, so there's nothing that could interfere with the oracle process. According to the 'top' command, the wait time is below 0.5%, so there should be no serious I/O problems. We've even checked JDBC connection pool settings in Weblogic, but I doubt this issue is related to JDBC (and everything looks fine anyway). The statistics are fresh and the results are quite consistent.
Edited by: user6510516 on 17.7.2009 13:46The setup is quite simple - the database is running on a dedicated database server (development only). Generally there are no 'intensive' tasks running on this machine, especially not when the procedure I'm talking about was executed. The application server (weblogic 10) is running on different machine so it does not interfere with the database (in this case it was my own workstation).
No, the procedure is not called 20000x - we have a table with batch of records we need to process, with a given flag (say processed=0). The procedure reads them using a cursor and processes the records one-by-one. By 'processing' I mean computing some sums, updating other table, etc. and finally switching the record to processed=1. I.e. the procedure looks like this:
CREATE PROCEDURE process_records IS
v_record records_to_process%ROWTYPE;
BEGIN
OPEN records_to_process;
LOOP
FETCH records_to_process INTO v_record;
EXIT WHEN records_to_process%NOTFOUND;
-- process the record (update table A, insert a record into B, delete from C, query table D ....)
-- and finally mark the row as 'processed=1'
END LOOP;
CLOSE records_to_process;
END process_records;The procedure is actually part of a package and the cursor 'records_to_process' is defined in the body. One of the queries executed in the procedure is the SELECT mentioned above (the one that jumps from 2% to 90%).
So the only thing we actually do in Weblogic is
CallableStatement cstmt = connection.prepareCall("{call ProcessPkg.process_records}");
cstmt.execute();and that's it - there is only one call to the JDBC, so the network overhead shouldn't be a problem.
There are 20000 rows we use for testing - we just update them to 'processed=0' (and clear some of the other tables). So actually each run uses exactly the same data, same code paths and produces the very same results. Yet when executed from SQL developer it takes 80 seconds and when executed from Weblogic it takes 800 seconds :-(
The only difference I've just noticed is that when using SQL Developer, we're using PL/SQL notation, i.e. "BEGIN ProcessPkg.process_records; END;" instead of "{call }" but I guess that's irrelevant. And yet another difference - weblogic uses JDBC from 10gR2, while the SQL Developer is bundled with JDBC from 11g. -
Select running slow in prod but work fine in T-1
We have a query which run very slow on production database it is taking around 7 min to run.
While it is working fine on T-1 database which gets refreshed every night, here it takes around 3 seconds.
both the os version and database versions are same.
Database is also refreshed and have same data and statistics.
please update what could be the reason?
SELECT c.txt_master_claim_no "Master Claim No",
c.num_serial_no "Serial No",
TO_CHAR(c.dat_loss_date, 'dd / mm / yyyy') "Loss Date",
d.departmentname "Line of Business",
m.productname "Product",
tab.stat "Status"
FROM (SELECT t.num_claim_no, 'REPUDIATION' stat, num_update_no
FROM gc_clm_gen_info t, gc_clm_os a
WHERE t.num_update_no =
(SELECT MAX(p.num_update_no)
FROM gc_clm_gen_info p
WHERE p.num_claim_no = t.num_claim_no)
AND t.txt_claim_status = 'X'
AND a.cur_os_amount = 0
AND a.num_ac_year * 100 + a.num_ac_month =
(select max(s.num_ac_year * 100 + s.num_ac_month)
from gc_clm_os s
where s.num_claim_no = a.num_claim_no)
AND t.num_claim_no = a.num_claim_no
UNION
SELECT a.num_claim_no, 'DISBURSE' stat, num_update_no
FROM gc_clm_os a, gc_clm_gen_info b
WHERE a.cur_os_amount = 0
AND a.num_ac_year * 100 + a.num_ac_month =
(select max(s.num_ac_year * 100 + s.num_ac_month)
from gc_clm_os s
where s.num_claim_no = a.num_claim_no)
AND b.num_update_no >
(SELECT MAX(x.num_update_no)
FROM gc_clm_gen_info x
WHERE x.num_claim_no = b.num_claim_no
AND x.txt_claim_status in ('F', 'X'))
AND a.num_claim_no = b.num_claim_no
UNION
SELECT a.num_claim_no, 'DISBURSE' stat, num_update_no
FROM gc_clm_os a, gc_clm_gen_info b
WHERE a.cur_os_amount = 0
AND a.num_ac_year * 100 + a.num_ac_month =
(select max(s.num_ac_year * 100 + s.num_ac_month)
from gc_clm_os s
where s.num_claim_no = a.num_claim_no)
AND b.num_update_no =
(SELECT MAX(x.num_update_no)
FROM gc_clm_gen_info x
WHERE x.num_claim_no = b.num_claim_no)
AND a.num_claim_no = b.num_claim_no
And b.txt_claim_status = 'F'
and not exists
(select 1
from gc_clm_payment_details p
where p.num_claim_no = a.num_claim_no
and p.txt_status in ('APPROVAL DUE', 'APPROVED'))
) tab,
gc_clm_gen_info c,
uw_product_master m,
uw_department_master d
WHERE tab.num_claim_no = c.num_claim_no
AND c.num_update_no =
(SELECT MAX(d.num_update_no)
FROM gc_clm_gen_info d
WHERE d.num_claim_no = c.num_claim_no)
AND c.num_department_code = d.departmentcode
AND m.productcode = c.num_product_code
AND M.DEPARTMENTCODE=D.DEPARTMENTCODE
AND c.txt_claim_status NOT IN ('O', 'S')
AND c.num_update_no = tab.num_update_no
AND c.num_claim_no not in
(select p.num_claim_no
from gc_clm_payment_details p, gc_clmmst_resource_type r
where p.num_type_of_party = r.num_resource_type_cd
and r.txt_loss_exp = 'E'
and p.txt_status = 'APPROVAL DUE') and Upper(C.txt_master_claim_no) like '%C231110020345%' order by c.NUM_CLAIM_NO Desc;
Edited by: user12195658 on Mar 24, 2011 7:27 AMfrom T-1 explain plan output is:
Explain complete.
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 1 | 132 | | 5862 (4)|
| 1 | SORT ORDER BY | | 1 | 132 | | 5862 (4)|
| 2 | NESTED LOOPS | | 1 | 132 | | 5853 (4)|
| 3 | NESTED LOOPS | | 1 | 97 | | 5852 (4)|
| 4 | NESTED LOOPS | | 1 | 83 | | 5851 (4)|
| 5 | VIEW | | 78 | 2574 | | 5617 (4)|
| 6 | SORT UNIQUE | | 78 | 6992 | | 5617 (78)|
| 7 | UNION-ALL | | | | | |
| 8 | FILTER | | | | | |
| 9 | HASH JOIN | | 29 | 1943 | | 1266 (5)|
| 10 | HASH JOIN | | 2895 | 115K| | 584 (5)|
| 11 | INDEX FAST FULL SCAN | IND_GC_CLM_GEN_INFO | 2437 | 43866 | | 353 (5)|
| 12 | TABLE ACCESS FULL | GC_CLM_OS | 36517 | 820K| | 229 (4)|
| 13 | VIEW | VW_SQ_1 | 43391 | 1101K| | 680 (4)|
| 14 | HASH GROUP BY | | 43391 | 1313K| 4712K| 680 (4)|
| 15 | TABLE ACCESS FULL | GC_CLM_OS | 65293 | 1976K| | 228 (4)|
| 16 | SORT AGGREGATE | | 1 | 15 | | |
| 17 | INDEX RANGE SCAN | IND_GC_CLM_GEN_INFO | 6 | 90 | | 3 (0)|
| 18 | HASH JOIN | | 76 | 6840 | | 2001 (5)|
| 19 | HASH JOIN | | 2207 | 137K| | 1338 (5)|
| 20 | HASH JOIN | | 365 | 17885 | 1256K| 1054 (4)|
| 21 | TABLE ACCESS FULL | GC_CLM_OS | 36517 | 820K| | 229 (4)|
| 22 | VIEW | VW_SQ_2 | 43391 | 1101K| | 680 (4)|
| 23 | HASH GROUP BY | | 43391 | 1313K| 4712K| 680 (4)|
| 24 | TABLE ACCESS FULL | GC_CLM_OS | 65293 | 1976K| | 228 (4)|
| 25 | INDEX FAST FULL SCAN | PK_GC_CLM_GEN_INFO | 262K| 3849K| | 276 (5)|
| 26 | VIEW | VW_SQ_3 | 30152 | 765K| | 661 (5)|
| 27 | HASH GROUP BY | | 30152 | 883K| 3336K| 661 (5)|
| 28 | INDEX FAST FULL SCAN | IND_GC_CLM_GEN_INFO | 46690 | 1367K| | 356 (6)|
| 29 | FILTER | | | | | |
| 30 | HASH JOIN | | 511 | 43435 | | 1535 (5)|
| 31 | HASH JOIN ANTI | | 337 | 22579 | | 1180 (4)|
| 32 | HASH JOIN | | 365 | 17885 | 1256K| 1054 (4)|
| 33 | TABLE ACCESS FULL | GC_CLM_OS | 36517 | 820K| | 229 (4)|
| 34 | VIEW | VW_SQ_4 | 43391 | 1101K| | 680 (4)|
| 35 | HASH GROUP BY | | 43391 | 1313K| 4712K| 680 (4)|
| 36 | TABLE ACCESS FULL | GC_CLM_OS | 65293 | 1976K| | 228 (4)|
| 37 | INDEX FAST FULL SCAN | IND_GC_CLM_PAYMENT_DETAILS | 2396 | 43128 | | 125 (6)|
| 38 | INDEX FAST FULL SCAN | IND_GC_CLM_GEN_INFO | 44253 | 777K| | 354 (5)|
| 39 | SORT AGGREGATE | | 1 | 15 | | |
| 40 | INDEX RANGE SCAN | IND_GC_CLM_GEN_INFO | 6 | 90 | | 3 (0)|
| 41 | TABLE ACCESS BY INDEX ROWID | GC_CLM_GEN_INFO | 1 | 50 | | 3 (0)|
| 42 | INDEX RANGE SCAN | PK_GC_CLM_GEN_INFO | 1 | | | 2 (0)|
| 43 | SORT AGGREGATE | | 1 | 15 | | |
| 44 | INDEX RANGE SCAN | IND_GC_CLM_GEN_INFO | 6 | 90 | | 3 (0)|
| 45 | NESTED LOOPS | | 1 | 26 | | 5 (0)|
| 46 | TABLE ACCESS BY INDEX ROWID| GC_CLM_PAYMENT_DETAILS | 1 | 21 | | 4 (0)|
| 47 | INDEX RANGE SCAN | IND_GC_CLM_PAYMENT_DETAILS | 1 | | | 3 (0)|
| 48 | TABLE ACCESS BY INDEX ROWID| GC_CLMMST_RESOURCE_TYPE | 1 | 5 | | 1 (0)|
| 49 | INDEX UNIQUE SCAN | PK_GC_CLMMST_RESOURCE_TYPE | 1 | | | 0 (0)|
| 50 | INDEX RANGE SCAN | UW_DEPARTMENT_MASTER_INDX | 1 | 14 | | 1 (0)|
| 51 | INDEX RANGE SCAN | IND_UW_PRODUCT_MASTER | 1 | 35 | | 1 (0)|
Note
- 'PLAN_TABLE' is old version
61 rows selected. -
FCP 4.5 running slow in latest OS
Hadn't edited at home on my G5 with FCP 4.5 in a while, but have since updated my MAC to 10.4.10 I noticed a drastic slowness in FCP after a while (pinwheel popping up, some functions not computing at all).I have 2.5 GB of SDRAM - could it be possible that I just need more RAM?
Thanks,
Dan.Daniel, As David suggested
"The BEST workaround is to do a clean install of OS 10.3, then update until you reach OS 10.3.9 and QT 6.5.2.
FCP wasn't written for OS 10.4 or QT 7, although it can run. It IS optimized for OS 10.3 and was/is very stable on OS 10.3.9 and QT 6.5.2."
FCP 5.1 will run very well with those versions. If you want to take advantage of the myriad improvements to the programs as well as the addition of Color, you will need to buy FCS2. Everything will run on 2.5 Gigs but yes, you will want more Ram.
And to take full advantage of color you will need one of the Intel based machines. -
Hi,
I am one of they few it seems who are having 10.8.5 slow issues. Following up on an earlier thread whre one other user was asked to paste a diagnostic command into terminal and see if it generated any output, I did the same thing. The command was:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
The result was:
Oct 14 17:57:31 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-update: did not find token 417157
--- last message repeated 1 time ---
Oct 14 18:03:46 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-unblock: did not find token 417157
Oct 18 23:03:00 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-update: did not find token 583927
Oct 18 23:19:53 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-unblock: did not find token 583927
Oct 19 09:29:28 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-unblock: did not find token 588563
Oct 20 10:35:42 Bobs-MacBook-Pro kernel[0] <Debug>: Previous Shutdown Cause: -60
Oct 20 20:36:43 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-unblock: did not find token 211
Oct 20 20:39:01 Bobs-MacBook-Pro kernel[0] <Debug>: nspace-handler-unblock: did not find token 320
Any ideas?
I had previous Safari crashing issues but these were solved (sadly) by switching to other browsers. Or were they just hidden?
Thanks in advance,
-BobHello there, BobWhitmore.
The following Knowledge Base article provides some great pointers for troubleshooting the behavior your seeing:
OS X Mountain Lion: If your Mac runs slowly
http://support.apple.com/kb/PH10798
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
I'm putting in a critical solution for a company using SharePoint Online. It's pretty much out of the box, but the customer insists that a load-testing exercise takes place to ensure that when they go live with it, it will cope with their number of u
-
Compressed PDF file is not displaying properly in Windows 8 Reader app
Hi, We have compressed a PDF file using some third party library. The compressed file is displaying properly, when we're opening the file with ADOBE reader. The same file is displaying blank, when we're opening the file with Windows 8 reader. Can any
-
I have a new 24" iMac which has some scratches on the white plastic frame around the iSight camera lens. These were inflicted by me quite accidentally. They're not too bad, but is there a way that I can remove these scratches? Is the surround on the
-
Restarting movies from the beginning
How can I re start a movie on my iPod, from the beginning without having to hold the rewind key all the way thru whatever has been already viewed? Thanks Diane
-
Hi , For few number of records say 20,The file Allignment is fine. For more than 500 records the allignment is getting changed. The File format is .OPT.Why this is happening ,any ideas? Thanks, Srinivasa