Running smq2 queues in debug mode

Hi,
Can anyone tell me how to successfully run an inbound queue in debug mode.
Following are the steps undertaken.
I locked the queue in SMQ1. The Queue is set to STOP state.
I then triggered an sBdoc flow into CRM.
I am expecting the sBdoc to be in an intermediate state, but to my surprise it is coming as Fully Processed.
At this point, setting Debug mode in smq2 and Unlocking the queue does not help me analyse the bdoc/process flow as the bdoc is allready processed.
Any inputs in this regard would be helpful.
Thanks & Regards
Ron.

Hi Ron,
Please check below blog, hope it helps u.
Regards,
Deven
/people/lokesh.aggarwal/blog/2008/02/27/debugging-crm-middleware--sales-document

Similar Messages

  • How to run labview program in debugging mode in windows 95 version

    Respected all,
    I am facing probelm while running probe.vi.
    I received this command "connection to acquisition board was not found" when i run labview program.
    I  am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
    I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
    Thanking You
    Yours faithfully
    M.Vijay

    Respected Norbert,
    Thank you very much to for your help.
    Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
     I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
    Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
    I am asking you to know, If i using Labview and  Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
    But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
    I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
    The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
    I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
    I also removed AT-AO-10 software from device manager >> Data Acquisition system >>  AT-AO-10 just now.
    I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
    I am eagerly waiting for your help.
    Thanking You
    Yours faithfully
    M.vijay

  • How to run the forms under debug Mode?

    Hi,
    I run my form under debug mode by introducing a break point on a trigger. But i am receive the following error how to solve this issue.
    JVM aborting and followed by the following one.
    FRM-92101: There was a failure in the forms server during startup.
    This could happend due to invalid configuration.
    Please look into the Web-server log files for details.and additional information from Java console.
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    Forms Applet version is : 10.1.2.0
    oracle.forms.net.ConnectionException: Forms session <5> aborted: unable to communicate with runtime process.
         at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
         at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
         at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
         at oracle.forms.net.HTTPNStream.flush(Unknown Source)
         at java.io.DataOutputStream.flush(Unknown Source)
         at oracle.forms.net.StreamMessageWriter.run(Unknown Source)I am running on my standalone machine.
    Where and what file i want to look into this to solve this issue.
    Good help will be appreciated. Thank in advance.
    kanish

    Kanish,
    Lets start with a few of the basics, shall we. What JVM are you using (Jinit or Sun JRE and the version)? Based on the error you posted, I can infer that you are using Forms 10.1.2.0? Are you running a custom configuration in the formsweb.cfg and default.env? This could be the cause if you have modified the CLASSPATH setting in the default.env excluding core .jar files.
    Typically, the FRM-92101 error is caused by a Java error; either a .jar is not found or invalid or not compatible with JVM, etc.
    Have you tried clearing your Java Cache to check for a corrupt .jar?
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Running Tomcat server in Debug mode?

    Hi..
    I am using Eclipse IDE to develop a Portal project.. I am also using Tomcat server for the same without using the default servers provided by eclipse..
    My question is how do I run the Tomcat server in the "debug" mode?
    Please help me..

    Take a look at these links: http://plato.acadiau.ca/courses/comp/dsilver/2513/EclipseAndTomcatTutorial/
    http://www.keyboardsamurais.de/2004/01/15/tomcat_tutorial_helloworld_for_complete_fools_-_english/
    http://www-128.ibm.com/developerworks/opensource/library/os-ectom/?ca=dgr-lnxw16EclipsTomcat
    I've found going through tutorials is a proven, quick way of getting up to speed with new tools and configurations.
    HTH,
    James

  • Contact Center anywhere When running the TCPIPBUS in debug mode

    hi all,
    i am not able to make the outbound call,through cca interface is there any way how i can debug to make the outbound call.
    wen i keep th etcpipbus in debug mode "it's not showing any erors "
    http://www.onsip.com/onsip-articles/what-is-my-sip-address
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
    14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:04.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    http://www.onsip.com/onsip-articles/what-is-my-sip-address14/04/2011 10:56:13.270 : 0 : 4036 : CTcpIpBus::Run() Activity
    detected
    14/04/2011 10:56:15.271 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:15.271 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:17.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:18.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:23.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:23.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:25.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:26.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:31.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:31.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:34.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:34.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:34.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:39.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:39.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:42.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    http://www.onsip.com/onsip-articles/what-is-my-sip-address14/04/2011 10:56:47.287 : 0 : 4036 : CTcpIpBus::Run() Activity
    detected
    14/04/2011 10:56:47.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    http://www.onsip.com/onsip-articles/what-is-my-sip-address14/04/2011 10:56:49.287 : 0 : 4036 : CTcpIpBus::Run() Activity
    detected
    14/04/2011 10:56:49.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:49.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:50.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:55.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    14/04/2011 10:56:55.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
    =========== [s: to stop application] ===========
    14/04/2011 10:56:55.740 : 0 : 4300 : SignalHandler(): Received signal = 2 ... Stopping the TCPIPBus Service
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 14, id = 32, group = 102,
    socket = 932]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 21, id = 7, group = 1, so
    cket = 948]--
    14/04/2011 10:56:55.787 : 0 : 264 : ExitThread: FileName[S:\development\version8.1.3.0\projects\TCPIPBUS\source\MainProg
    .cpp] LineNumber[394]
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 5, id = 10, group = 1, so
    cket = 964]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 16, id = 14, group = 1, s
    ocket = 980]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 16, id = 38, group = 102,
    socket = 996]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 2, id = 27, group = 17454
    5677, socket = 1012]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 19, id = 35, group = 102,
    socket = 1028]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 26, id = 39, group = 102,
    socket = 1048]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 23, id = 37, group = 102,
    socket = 1064]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 10, id = 1, group = 17454
    5677, socket = 1080]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 23, id = 13, group = 1, s
    ocket = 1096]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 97, id = 5, group = 17454
    5677, socket = 1112]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 26, id = 15, group = 1, s
    ocket = 1128]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 20, id = 12, group = 1, s
    ocket = 1144]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 11, id = 33, group = 102,
    socket = 1160]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 5, id = 34, group = 102,
    socket = 1176]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 21, id = 41, group = 102,
    socket = 1192]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 6, id = 3, group = 174545
    677, socket = 1224]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 14, id = 8, group = 1, so
    cket = 1240]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 20, id = 36, group = 102,
    socket = 1256]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 11, id = 9, group = 1, so
    cket = 1272]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 19, id = 11, group = 1, s
    ocket = 1288]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 101, id = 29, group = 174
    545677, socket = 1304]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 98, id = 1302698446, grou
    p = 174545677, socket = 1472]--
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 98, id = 1302698440, grou
    p = -174545677, socket = 1488]--
    14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 12, id = 4232, group = 17
    4545677, socket = 1504]--
    14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
    14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::Run() Leaving...
    14/04/2011 10:56:55.803 : 0 : 4036 : Exit CommunicatorThread: FileName[S:\development\version8.1.3.0\projects\TCPIPBUS\s
    ource\MainProg.cpp] LineNumber[168]
    14/04/2011 10:56:55.803 : 0 : 5168 : BUS Exit
    http://www.onsip.com/onsip-articles/what-is-my-sip-addresshttp://www.onsip.com/onsip-articles/what-is-my-sip-address^Aht
    tp://www.onsip.com/onsip-articles/what-is-my-sip-address

    Voice stream debugging is done at the call center level.
    Set the calls centers to trace level 5.
    This will then output all messaging for the voice portion of CCA.

  • RS232 wont start in rtexe, but runs just fine in Debug Mode

    Hi Guys,
    first of all sorry for my bad english!
    I have a "little" problem with my Program, especially with the builded version of my program.
    As long as I am connected via my Windows machine and in the Debug Mode of my Main.vi everything works just fine, no errors and does what its intended to do.
    But when i try to build my rtexe and run it as startup it wont open rs232 connection to my devices.
    Any Ideas?
    My installed VISA Version is 5.4.1 and I am running LV 2013 SP1.
    Target is a cRIO 9082, also VISA 5.4.1 and NI RIO 13.1
    Funny thing is it worked just fine a few builds back, but I did no changes on my System.

    Sry for not replien earlier, I dont have access to the machine every day.
    So i just added a log for the error codes and got: -1073807343
    Now I am even more confused, how could that be? It says " Insufficient location information or the device or resource is not present in the system."
    I am using COM7 and COM8, and as u can see in the attachment they are there! And the also work when i start the vi on my windows machine?!
    Attachments:
    Clipboard01.jpg ‏99 KB

  • How to run trigger/procedure into debug mode

    Hi,
    I have created trigger. i would like to run this into debug mode. Please suggest that how to do through sqldeveloper or sql command prompt.
    Regards,
    Venkat

    - install PL/SQL developer (trial available at www.allroundautomations.com)
    - connect to your DB
    - in the tree on your left right click your trigger and select "Add debug information"
    - open a new test window (file - new - test window)
    - -- Created on 20-2-2012 by RMARTENS
    declare
      -- Local variables here
      i integer;
    begin
      -- Test statements here
      insert into table (col1, col2) values ('cal1', 'val2');
    end;- now click the "Start debugger" button and you'll be able to step into all the steps.
    - the idea is that you do a "step into" on your insert statement (which offcourse you need to alter according to your table)
    good luck!
    Regards,
    Richard
    blog: http://blog.warp11.nl
    twitter: @rhjmartens
    If this question is answered, please mark the thread as closed and assign points where earned..
    Edited by: rima on 20-feb-2012 11:37

  • Could not run flex app in debug mode

    All of a sudden I am having issue running my flex app on debug mode that was running fine before. When ever I launch my app on debug mode, I get a popup information that says,
    "This file you chose is not inside a project, so many Flex Builder features will be disabled."
    I asks me to create a new flex project. I have tried to close the FB and relaunch it, restarted my machine couple of times, cleared the browser cache. nothing seem to work?
    What is the issue with this? I have never come across this issue before. Any help will be highly appreciated. Thanks.
    KM

    Try asking on the Flash Builder forum

  • Running a form in Debug Mode

    Hi,
    Is it possible for us to debug a forms which is running in Oracle AS?
    I guess is a remote question, but what is the purpose of having Attach Debug & Debug Control in the form builder?
    Please help me.
    Thanks
    Balaji

    Attaching to a Form running outside the builder
    The advantage of attaching the debugger to a Form that runs outside of the Builder is that the Form can be running on a different machine other than the one debugging it. The configuration gives an end user the opportunity to run the Form and encounter errors while the developer debugs interactively with the user.
    To start debugging a Form that runs outside the Builder, the Form must be invoked with the parameter Debug=yes passed in the URL. This parameter will invoke a dialog that displays the host name and port number.
    In the Forms Builder, open the FMB for the running Form, and select Debug | Attach Debug. You'll need to supply the host name and port number to start debugging the running Form.

  • Error in running flex application in debug mode

    Hi, my
    Failed to connect; session timed out.
    Ensure that:
      1. You compiled your Flash application with debugging on.
      2. You are running the debugger version of Flash Pl

    Hi Chandrasekar,
    i have a very simple application with a iview. This iview contains a startpoint and a form view with one checkbox field - also no BI-Query included.
    But we have the same problem of our complex models too.
    Greetings

  • WARNING: server is running in overflow db debug mode.

    Is this warning (in the Apple Password Service Server Log) usual? If not, does anyone have any idea what would invoke this condition?
    This is with OS X Server 10.6.2, running an OD master with about 20 user accounts.
    If the warning indicates a problem, the only issue I have noticed with functionality is occasionally slow authentication. (There is another issue — kerberos not autorenewing — which I understand is an issue with 10.6.2 client, rather than the server).

    Is this warning (in the Apple Password Service Server Log) usual? If not, does anyone have any idea what would invoke this condition?
    This is with OS X Server 10.6.2, running an OD master with about 20 user accounts.
    If the warning indicates a problem, the only issue I have noticed with functionality is occasionally slow authentication. (There is another issue — kerberos not autorenewing — which I understand is an issue with 10.6.2 client, rather than the server).

  • Determine if running in a debugger/debug mode?

    Does anyone know a way to determine from within a program if it is being running in a debugger?
    Thanks!

    This is not possible. The Application Express engine must insert into and update tables whenever it is invoked.
    Scott

  • Can't Run program in Debug Mode

    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about 50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business Model we
    are wondering if Forte is timing out during the partition phase or if the
    server partition is running out of memory . The following error messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor", (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada
    -----------------------------------------------

    Hi,
    We have had the same problem in a non-express application
    with a heavy server partition. In our case, the error was not
    systematic, depending on the server workload at the time we
    tried to partition and run.
    The work-around we're using is to put the -fm flags (increasing the x
    parameter to say 30000) in the 'server arguments' of your server
    partition
    properties in the partition workshop. Note that if your server is a Unix
    platform,
    you need to put double-quotes before and after the parenthesis in the -fm
    syntax.
    Hope this helps,
    Vincent Figari
    BTW, what Forte version are you using ?
    On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
    writes:
    >
    >
    >
    >
    >
    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a
    non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about
    50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business
    Model we
    are wondering if Forte is timing out during the partition phase or if
    the
    server partition is running out of memory . The following error
    messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition
    testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of
    the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
    node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more
    information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called:
    qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor",
    (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means
    the
    process at the other end of the wire failed. Please go look there
    and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition
    testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition
    testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
    agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition
    testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition
    testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
    application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode:
    SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada

  • Run form in debug mode with windows vista

    hi guys
    plz help me
    i'm using oracle forms 10g r2 on windows vista home primume and everything is ok but
    when i need to run any form in debug mode i get the following
    the jvm 1.4 give me jvm is aborting after that
    the oc4j give me the following error frm-92101 there was a failure in the form server during start up
    thanks

    Hi Manoj,
    You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
    Let me know if you need more information.
    Thanks,
    Pawan

  • Running Forms in Debug Mode (appletviewer / J-Initiater)

    Hi All,
    I have a sitiuation where i would like to run a form with debug_messages='YES'. The form is compiled under Forms 4.5 16 bit Windows 95. It is run with J-Initiater under a NCA enviroment. Is there a command parameter to run the fmx in debug mode, probably as a applet parameter or something.
    Thanks,
    Easo

    Attaching to a Form running outside the builder
    The advantage of attaching the debugger to a Form that runs outside of the Builder is that the Form can be running on a different machine other than the one debugging it. The configuration gives an end user the opportunity to run the Form and encounter errors while the developer debugs interactively with the user.
    To start debugging a Form that runs outside the Builder, the Form must be invoked with the parameter Debug=yes passed in the URL. This parameter will invoke a dialog that displays the host name and port number.
    In the Forms Builder, open the FMB for the running Form, and select Debug | Attach Debug. You'll need to supply the host name and port number to start debugging the running Form.

Maybe you are looking for

  • URGENT:  Downloading P2 Files into Final Cut 2.1.4

    We shot 1080i 24p (I know this doesn't make sense, but it's what my cinematographer is calling it) with a Panasonic AG-HVX200 (don't know if it's the 'E'). She downloaded the files onto my hard drive, but when I try to import them into my Final Cut 2

  • My podcasts stop auto updating

    They stop automatically updating when I haven't listened to one in a while. It's annoying because sometimes there's reasons I haven't listened to one in a while but I still want it updated. But iTunes insists on stopping updates if I haven't listened

  • BAPI_CUSTOMER_GETLIST returning one less result when multiples of 100...

    Good day, All We call BAPI_CUSTOMER_GETLIST to return address information (ADDRESSDATA) for a group of customer records (IDRANGE).  Problem is that when the number of customer records is 201, 301, 401, 501, ... the address records that are returned a

  • Can we get the data from two internal tables in ALV.

    hi friends i would like to display the data using two internal tables using alv grid.please guide me.

  • Konqueror home page

    I recently switch to konqueror from FF. After a couple of days it has started to use archlinux as its home page. I don know how I set it to this or how to change it.