Running SMS Reporting Toolkit for inventory

I’m using SMS Reporting tool kit ver 4.0, with SCCM 2007 R3. Is there a newer version?
How long would it/should it take for SCCM to query 2500 systems in SCCM for Adobe SWTAG files? The current scan has been running for about 3 hours now.
Will the SWTAG scan pick up more recent Adobe CS5/6 products?
I added SWTAG file collection in SCCM software Inventory. Inventory has run on many systems, but I cannot run a SCCM query to locate systems with these files. Does anyone have a SCCM query to find these systems with SWTAG files?
I have looked on other Adobe/Microsoft forums with little success.

v_GS_* views are for hardware inventory.
All discovery information goes into v_R_System.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Item Transaction History Report - Calculation for creating 'Running Total'

Hello
Using Oracle Discoverer, we have written a report that pulls back all Inventory Transactions (by item number). This report lists both transactions IN (e.g. receipts into the store) and OUT (e.g. issues out from the store).
Our customer would like an additional column, to represent 'Running Total', to be added to the report. This column needs to capture the running 'On Hand Quantity' for the associated Item, as each transaction (both transactions IN and OUT of store) is displayed.
For example, if the initial/first transaction for an item was a Receipt of 500, then this column (on the first line) should display 500. If the second transaction for the item was an issue of 15, then this column (on the second line) should display 485. If the third transaction was for an issue of 50, then this column (on the third line) should display 435. If the fourth transaction was for a receipt of 20, then this column (on the fourth line) should display 455 etc etc
I'm not sure how I'd write a calculation to cater for this (within discoverer) - do you know if this is achievable? Any help would be much appreciated. This would be easy enough to do in Excel, but I'm a bit of a novice when it comes to discoverer(!)
Many thanks
Ross

Hi,
You can generally do this type of calculation using analytic functions. You would partition by the item number and order by the transaction date in the analytic function. You can use SUM function (with an order by) to get a running total of a column in the report. You can SUM a calculation containing a CASE statement which changes the OUT transactions to a negative number. The SUM function will start at zero, so you then can use FIRST_VALUE function to get the first value for the item which you could then add to the totals.
Rod West

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

Query for Inventory Audit Report

hi experts,
I would like to create a inventory report using Crystal Reports 2008 which looks exactly the same as Inventory Audit Report in SAP Business One 2007A
Report requirement:
List down all the items with its Item Code, Description, Quantity and Item Cost (easy right?)
The only condition:
I would like to filter my report by FromDate and ToDate.
For example:
Current date 15.07.2009
If I run the report by putting in 01.01.2009 to 31.01.2009, the result will show me:
item, with its respective info and most importantly the Quantity and Item Cost as at 31.01.2009 (similar to closing stock)
Any query for above report?
Please help.
Thank you.

Hi,
It may not be so simple as you are trying to reproduce the historical value. I believe you have to create a temporary table first. Or you may use Command feather to get the required data in advance.
Thanks,
Gordon

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

How to Run a Report for Blanket PO that have been OVER Invoiced (over limit

Hi All,
How do I run a report in ME2N, where I would want to see all the Blanket POs (Framework Orders) that has a "Actual Value" (the amt invoiced so far) which is Greater than the Overall Limit (specified in the "Limits" tab)?
Are there any fields in the Dynamic Selection in ME2N? I coudn't Find any......How can I compare two fields in the Blanket PO, for example "Overal Limit' > "Actual Value"?? How to put this selection criteria in ME2N
Edited by: Duke Dukester on Sep 17, 2008 10:31 AM

You will not get this information via ME2N but you can get via ME2S
once you execute the ME2S you will see the PO lines and if oyu double click on it than you will get the all information you are looking but the exact query directly not possible with ME2S
The best way is write the query using table ESUH and EKPO
joint EKPO to ESUH and do the query based on your requirements.
you can get the package number from EKPO and based on the package number you can retrive the data form ESUH table

Report for Inventory Ageing

Our client wants a report for Inventory Ageing. (we are not using batch management)
Use tried to sell Standard report MC46 but they are not convinced with the results.
The issue is if the material is not consumed for last 399 days but today if some movement is there in that particular material, then the material is not shown as non moving. Actually the material was not at all used for last 399 days.
In mc.5 report there are key figures like last consumption, last good issue etc but the same problem is there with it.
We are trying to develop a customised report.
Please help.
Thanks in advance.

Hi,
The Stock Aging Report displays the description of material that are stocked for n-number of periods at particular inventory locations( may be trading plant or manufacturing Plant). The details, which are displayed, are about the aging period for the selected items.
There are reports and T code are
MC.A ,
MC.9,
MM5B,
MMBE,
MB5M,
MC50 - Dead Stock ,
MC46 - Slow-moving items,
If the above reports not meet your requirement, you should develop your own ABAP program to meet your specific business requirement.
This is define in overall stock on value based, suppose a material is received in Feb-month, same material is received in Jan-2007 , DEC-2007 also.The total value of this inventory is say 90 lakhs, ( 30 lakhs of each month) so system will show inventory aging as below
stock aging less than 30 days, 90 lakhs
stock aging more than 30 days but below 60 days 60 lakhs
stock ageing more than 60 days but below 90 days 30 lakhs
Assuming that no issue taken place if issue is taken place, it will be deducted by default FIFO method.
You may have to develop an ABAP report.
However, look into the path: information system > logistics > inventory managment > material and explore all like MC.9,MC.A,MC.B & MC.C
Regards,
Biju K

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Report Generation toolkit for labview 2010

H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.

Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Control checkbox form field in word with report generation toolkit for Microsoft office

Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.

Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

Running SMS Reporting Toolkit for inventory

Similar Messages

Maybe you are looking for