Running SOLMAN_SETUP

I have installed Solution Manager 7.0 EHP1, setup the SAP GUI to connect to the system. I believe the next step is to run SOLMAN_SETUP basic configuration.
In oder to do this do i need to create a user?
At the moment when i open the SAP GUI and connect i get a screen which the following fields:
CLIENT [001]
USER {blank]
PASSWORD {xxxxxxxxxxxxxx]
Language [ ]
Should i be entering a default system user in here?
Any help appreciated.

Hello,
If you just installed it SAP* should still be enabled
Are you sure you can't logon
Client: 000 or 001
User: SAP*
Password: 06071992
This should remain active until you perform this procedure: Defining a New Superuser and Deactivating SAP*
Described in this link
http://help.sap.com/saphelp_nw70/helpdata/en/3e/cdacecedc411d3a6510000e835363f/content.htm
Deactivating the Hard-Coded SAP* User
You can also deactivate the hard-coded user SAP* by activating the profile parameter login/no_automatic_user_sapstar. For more information, see SAP Note 68048.
So if you have not yet de-activated SAP*, then the following should still be valid
Client: 000 or 001
User: SAP*
Password: 06071992
Regards,
Paul

Similar Messages

Error when running SOLMAN_SETUP

Dear All,
I want to do initial configuration using SOLMAN_SETUP in Solution Manager 7 EHP1 on Windows 2003.
I have appled the SP Stack 22.
In new client say 500 when I tried to run SOLMAN_SETUP, after logon screen (after entering user name and password) following error occured.
http://rlssma:8000/sap/bc/webdynpro/sap/wd_sise_main_app was not called due to an error
Note
The following error text was processed in the system SM2 : Die URL enthält keine vollständige Domainangabe (rlssma statt rlssma.).
The error occurred on the application server rlssma_SM2_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
I also check ST22, the same time Runtime error "UNCAUGHT_EXCEPTION" occured. Exception is CX_FQDN.
Thanks in advance.
Nirav

Hi,
Thanks for your reply.
I have already maintained icm/host_name_full .
I have run the t-code SIAC_PUBLISH_ALL_INTERNAL and publish all the services as you have suggested.
but problem remain same.
Thanks,
Nirav

500 Internal server error when running SOLMAN_SETUP

Hi experts,
I'm configuring our solution manager with the SOLMAN_SETUP transaction. In the "initial Configuration", step "j2ee configuration", I click the "Start SLD configuration" button and appears an Internet explorer. After loggin with an administrator user/password, the following error appears:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.lm.ctc.ccl.wd.TemplateInstallerCompController.getSelectedForSkipActions(TemplateInstallerCompController.java:741)
    at com.sap.tc.lm.ctc.ccl.wd.ScenarioTemplateViewController.actionReexecuteSelectedTemplate(ScenarioTemplateViewController.java:141)
    at com.sap.tc.lm.ctc.ccl.wd.ScenarioTemplateViewController.init(ScenarioTemplateViewController.java:115)
    at com.sap.tc.lm.ctc.ccl.templateinstaller.ScenarioTemplateView.wdDoInit(ScenarioTemplateView.java:106)
    at com.sap.tc.lm.ctc.ccl.templateinstaller.wdp.InternalScenarioTemplateView.wdDoInit(InternalScenarioTemplateView.java:475)
    ... 37 more
See full exception chain for details.
Our solution mananger release is 7.0 EHP1.
Do you have any idea of what the problem is, please?
Thanks and best regards,
Ana

Hi,
The E:\usr\sap\SOL\DVEBMGS00\j2ee\cluster\dispatcher\log\defaultTrace.0.trc last entries are:
#1.5 #000C298948DC001C0000000200000FA80004765AE7A68A56#1256032712398#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######SAPEngine_System_Thread[impl:6]_27##0#0#Error#1#/System/Server#Plain###Exception in ConfigurationChangedListener:
null
=======================================================
java.lang.NullPointerException
+     at com.sap.engine.services.monitor.common.MonitorConfigurationHandler.configurationChanged(MonitorConfigurationHandler.java:1105)+
+     at com.sap.engine.core.configuration.impl.event.PathEventProcessor.sendEvents(PathEventProcessor.java:138)+
+     at com.sap.engine.core.configuration.impl.event.EventProcessor.processEventListeners(EventProcessor.java:121)+
+     at com.sap.engine.core.configuration.impl.event.QueuedEventProcessor.run(QueuedEventProcessor.java:48)+
+     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)+
+     at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:80)+
+     at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:150)+
#1.5 #000C298948DC001F0000001D00000FA80004765B772CB455#1256035120366#com.sap.engine.core.thread.impl6.ThreadManagerImpl##com.sap.engine.core.thread.impl6.ThreadManagerImpl#######Thread[Thread-30,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:6]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:6]_37]
Task: com.sap.engine.core.thread.impl6.ActionObject - Processing Task [classname: com.sap.engine.services.log_configurator.archive.ArchivingThread | toString: [email protected]7a6dd8e1] with classloader [[email protected]2254d@service:log_configurator]#
#1.5 #000C298948DC001F0000001D000003680004765BBE6F6136#1256036315718#com.sap.engine.core.thread.impl6.ThreadManagerImpl##com.sap.engine.core.thread.impl6.ThreadManagerImpl#######Thread[Thread-1738,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:6]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:6]_12]
Task: com.sap.engine.core.thread.impl6.ActionObject - Processing Task [classname: com.sap.engine.services.log_configurator.archive.ArchivingThread | toString: [email protected]3f6a5bcb] with classloader [[email protected]0d8e1@service:log_configurator]#
And the E:\usr\sap\SOL\DVEBMGS00\j2ee\cluster\server0\log\defaultTrace.8.trc entries related to the error message are:
#1.5 #000C298948DC00540000033C00000F1400047684AAF47374#1256212082608#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#SISTEMAS#104##crosol203_SOL_2722150#SISTEMAS#bf43cb51bf0011de8147000c298948dc#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server/WebRequests#Plain###application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [000C298948DC00540000033A00000F1400047684AAF47077]#
Thanks and best regards,
Ana Abad

When and for what to run SOLMAN_SETUP?

Hi!
We have already configured some processes and functions within the solman.
Now we did patch our solman from SPS 17 to SPS 20 with EhP1.
Do we have to run the SOLMAN_SETUP?
E.g. for some new functions and so on.
Is there a delta-setup within the SOLMAN_SETUP possible?
I do not want to overwrite existing information or table entries which we possibly need.
What are your experience with that?
Thanks for help in advance.
Best regards,
Alex

Hi
This guide covers the features solman_setup offers to you with screenshots..
https://websmp108.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001927282008E
basically it comprises of
1. Initial setup----To be run initially or first time new installation -
2. Basic configuration --can also be used after an update to EHP1 to perform delta configuration
3 managed system configuration ---config and conn to managed systems
Hope above points clear ur doubts and rest guide can bee seen with screen to provide clarity..
In addition check below the system demo
https://websmp109.sap-ag.de/~sapidb/011000358700000048292009F/
Regards
Prakhar
Edited by: Prakhar Saxena on Oct 28, 2009 2:55 PM

Running solman_setup again in productive client?

Hello,
my colleague fully completed solman_setup initial configuration in client 000.
He also started basic configuration but stopped at step 7 (Automatic Configuration: Activate BC Sets).
In productive client 100 I would like to start the complete setup with initial / basic configuration again.
We have MOPZ / EWA / service level reporting, documentation, project management in productive use.
Are there any risks or side effects to be expected?
Thanks and Regards,
bcAS

Hello,
If you just installed it SAP* should still be enabled
Are you sure you can't logon
Client: 000 or 001
User: SAP*
Password: 06071992
This should remain active until you perform this procedure: Defining a New Superuser and Deactivating SAP*
Described in this link
http://help.sap.com/saphelp_nw70/helpdata/en/3e/cdacecedc411d3a6510000e835363f/content.htm
Deactivating the Hard-Coded SAP* User
You can also deactivate the hard-coded user SAP* by activating the profile parameter login/no_automatic_user_sapstar. For more information, see SAP Note 68048.
So if you have not yet de-activated SAP*, then the following should still be valid
Client: 000 or 001
User: SAP*
Password: 06071992
Regards,
Paul

Solman_Setup, J2EE Configuration, start J2EE Config points at old server

Hi,
I have recently performed a system copy on my solution manager server. As far as I'm aware I have followed the correct procedure and performed all post installation tasks.
Since the copy I have a problem with my SLD which is in my solution manager system. I think it may be one of two problems.
Firstly
When I run SOLMAN_SETUP initial configuration step 3 - Start J2EE Configuration the url launched points at my old server name rather than the new one.
I have raised a call with SAP and have so far done the following things
Notes : 1297849 & 805344 - Everything pointed to new server
Notes 1301106 & 669669 - I have patched ABAB & JAVA AND updated the Content in the SLD
Note 624282 : Transaction LCRSERVADDR contains no entries and the SLDCHECK launches the correct SLD info.
None of these notes resolved my issue
Secondly
In transaction SMSY my solution manager settings are not correct - The ABAP stack is correct the message server points to the new message server, however the JAVA stack message server still points to the old system. I have tried to delete but I am unable to as I get the message system in use in Groups / Landscapes. SAP have done work on my server as part of the SURGEN programme and I'm sure this is something they have done that I am not able to remove.
Please help.
Regards
Tracey Smith. (John Beard - Corporate account for Kelda Group)

You are using client 100 for example. It seems so that the UME store from the Java stack still points to the 001 client (probably you made a client copy on ABAP side from 001 to 100????). The CTC want to check SOLMAN_ADMIN user in the system where the UME destination is set (in this case 001).
So basically you got now 2 options: redirect your Java UME to client 100 or you simply create the required user SOLMAN_ADMIN in 001 client.

Solman_Setup blank screen

Hello all,
I created a new installation of Solution Manager 7.1 and I'm having an issue where I run SOLMAN_SETUP and then my IE browser opens to a blank screen. I have configured connection for HTTP rather than HTTPS.
I have set all the params in RZ10 per the Configuration manual, and I'm using IE9 on Windows 7. I have also tried on a remote client running Windows Server 2003 with IE7.
I'm just wondering if I am missing an extra configuration, or I am using an incompatible version of Internet Explorer?
I have checked other threads in this forum and I saw a downgrade to IE6 supposedly fixed the issue? I do not wish to downgrade that far unless it's absolutely necessary.
Any help would be greatly appreciated.
Thanks!
Edited by: Ben Daniels on Dec 5, 2011 9:09 AM

Ben does it saying "Starting Application.." after you run the tcode solman_setup??
The issue is definitely related to IE.Currently I am also using IE6 .
I would advice to set up an OSS with SAP asking the alternate resolution other than downgrade to IE6.

Solman_setup error: Text NL9 Not Found

Hello Experts,
I perform a fresh solution manager installation, and applied SPS20 and finally SPS23
Then when try to run SOLMAN_SETUP a dump is raised with the following information:
The following error text was processed in the system SLM : Text NL9 Not Found
The error occurred on the application server solman_SLM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_COMPONENT_ASSISTANCE~GET_TEXT of program CL_WD_COMPONENT_ASSISTANCE====CP
Method: SUPPLY_NL_REL_LINKS of program /1BCWDY/SEVJ79UM4LBSJJZ7IXDN==CP
Method: SUPPLY_NL_REL_LINKS of program /1BCWDY/SEVJ79UM4LBSJJZ7IXDN==CP
Method: SUPPLY_ELEMENTS of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_ELEMENTS of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: IF_WD_CONTEXT_NODE~GET_ELEMENTS of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CPATTERN================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CPATTERN================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
So far Iam unable to find any suitable information in order to solve this.
I already execute:
SGEN
SIAC_PUBLISH_ALL_INTERNAL
activate all services in SICF
I really appreciate your help on this
thank you

Thank you for the quick answer, even though your information solved this particular problem, later on while running solman_setup I got similar dumps, therefore i realized that there was an error else were.
Problem was I imported English language (usually you don't do it) in TC SMLT, and the language part of support packages were missing, any way. I restored a backup I made just before Spanish language import was performed.
Then I start over again. I imported Spanish language, then supplementation for spanish and finally import language part support packages and everything went fine during solman_setup
thank you for your valuable information

Solman Setup; SOLMAN_SETUP

Hi,
Currently we are using some features of Solman ( like Service desk, EWA, Optimizer etc). Can I run the TCode: Solman_setup at this moment. Is it feasible or I have to do remaining features configuration manually.
Regards
PK

Hi
After installation run SOLMAN_SETUP it is wizard based tcode which will do all the basic initial and adv config for youThis guide covers the features solman_setup offers to you with screenshots.
https://websmp108.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001927282008E
https://websmp109.sap-ag.de/~sapidb/011000358700000048292009F/
basically it comprises of
1. Initial setup----To be run initially or first time new installation
2. Basic configuration --can also be used after an update to EHP1 to perform delta configuration so this suits ur requirement here.
3 managed system configuration ---config and conn to managed systems
Hope it solves ur problem
Regards
Prakhar

SOLMAN_SETUP transaction not working

Hello Guru,
For 6 weeks I installed the SOLMAN 7.0 EHP 1 and I upgrated it to the latest Package 20.
I also configured everything alone and connected myERP system with the solman system.
I upgraded both systems to the highest level using maintenance optimizer.
Now, I'm wondering how and why should I use the SOLMAN_SETUP.
So, one day I decided to started the transaction but unfortunately I get "500 connection time out" on the SAP Web Application Server.
How can I resolve the issue.
I'm also aware that I need to do this, to get an automactic maintenance certificat from SAP, which will be propagated to all other system without having the need to do it manually.
Thanks for your Respond.
Best Regards,
Kais

The first time you run SOLMAN_SETUP it has to compile all the web dynpros, which takes a lot of time.
In Solution Manager run transaction SMICM and choose Goto -> Services.
Choose the HTTP service and then choose Service -> Change from the menu.
Change the Max Processing Time setting from the current value (default = 60) to 6000 and save.
Then run SOLMAN_SETUP.
When you're done, you can reset the HTTP service timeout, and when your restart the Solution Manager system it will also reset.
Rich

Error starting solman_setup with 7.1 SPS03

I have just installed solman 7.1 and patched to sps03.
However, when I run SOLMAN_SETUP I get a script error in the browser window:
Message: 'UCF_Properties' is undefined
Line: 1
Char: 1222
Code: 0
URI: http://x.x.x:8000/sap/bc/webdynpro/sap/wd_sise_main_app?sap-language=EN
I found OSS notes 1547441 and 1621785 regarding the wizard using flash technology, however the workarounds (adding a flag to the URL and installing latest Adobe Flash player v11) provided in those notes did not help!
I opened a customer message, but curious if anyone else has this issue!

Strange
A colleague with a lower IE8/Flash version did not have an issue.
Since it was a script error I tried (in IE) Tools-Developer Tools when I got the error. It brought up the page source, I went to the script tab and clicked start debugging, with breakpoints set to 'break on error'. Then the page actually displayed! Now it is working even without debugging!!
I have a customer message still open and if they provide anything, but this seems to be working now!
FYI, my versions:
IE 8.0.7600.16385
Adobe Flash Player 11 Active X 11.0.1.152
Adobe Flash Player 10 Plugin 10.1.102.64

SMD Error in managed system type PI 7.1 EHP1 Step Logical Ports error

Hi people,
Solution Manager Ehp1 7.0 SPS24
I am currently runnig the wizard setup for managed System, everything is fine but when I run for PI 7.1 I get the following error:
Fri Sep 10 20:29:48 2010 Logical Ports A failure occured while creating the logical port for JAVA XI : PORT_NOT_CREATED
Step Logical Ports Details
A failure occured while creating the logical port for JAVA XI : PORT_NOT_CREATED
!! Exception : PORT_NOT_CREATED
Exceptions
com.sap.mw.jco.JCO$AbapException: (126) PORT_NOT_CREATED: PORT_NOT_CREATED
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1511)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3980)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3514)
at com.sap.sup.admin.setup.SolManRfcAdapter.createXIlogicalPort(SolManRfcAdapter.java:185)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:427)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:335)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:549)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1695)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1965)
at java.lang.Thread.run(Thread.java:534)
Any ideas?
Thanks in advance

Hi everyone,
Thanks everyone.
Guilherme, finally I understand what really happens. "Refresh" is not working properly in the Setup Wizard.
First I have done what I can:
System    Type      Managed Products                    Product Instances
DPI           ABAP     SAP Netweaver PI 7.1               Application Server ABAP (I could not select PI at the same time)
DPI           JAVA     SAP Netweaver PI 7.1               Application Server Java + Process Integration
But, when I refresh the browser Internet Explorer appears the following:
System    Type      Managed Products                    Product Instances
DPI           ABAP     SAP Netweaver PI 7.1               Application Server ABAP + Process Integration
DPI           JAVA     SAP Netweaver PI 7.1               Application Server Java + Process Integration
And then I do not get the error anymore. (I have to repeat step 2 in the wizard "Check Prerequisites for Diagnostics)
And If I run transaction SMSY, I can see how PI is mantained since the wizard refresh SMSY.
Product Instance Selection tab:
Application Server ABAP (Flag selected: relevant)
Process Integration (Flag selected: Also Installed, Technical System[ DPI, Java])
Application Server Java (Flag selected: relevant, Technical System[ DPI, Java])
So, if I use this configuration in the SMSY, when I run "solman_setup", configuring DPI (My PI7.1), when I run "Configure Diagnostics", the wizard shows ABAP + PI as expected.
Thanks a lot Guilherme!!

Solution Manager 7.1 Basic Configuration error

Hi guys
I'm having problems with accessing the basic config wizard via spro, i'm also having the same issue trying to run "solman_setup" and "workcenter". For both issues i get "Internet Explore cannot open the webpage". The ITS is activated along with the ther services. If there's any settings that I"ve missed your help will be very much appreciated and please let me know if you need more information from me.
Thank you.

Hi ,
I suppose you are not having problems with the FQHN in other web screens, so DNS should be fine.
if this is a Microsoft Windows system I would try this workaround.
note 677118
(*) One quick solution is to update the hosts file on each
     work station. (Only an option for small installations.)
     File:          \WINNT\system32\drivers\etc\hosts
     Add new line: 10.17.73.210   hostname.domain.ext
     This must be done per workstation.
regards, Javier

Wily introscope issue after System refresh in solman 7.1 Sp11

Hello experts,
Unable to remove old Production wily in quality system.
An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
Unable to unassign or delete old wily introscope
Thanks ,
Rahul Yedapally

Hi Rahul,
Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
and all so make sure RFCs WEBADMIN , SOLMANDIAG and
NONE are working fine in SOLMAN.
Thanks,
Prakash Reddy Maram

How to create a new solution for portals?

Hi all,
In order to makde goinglive sesions for portals, I´ve updated SAP Solution Manager (SSM) to 7.0 EHP1-SP19.
Portals have two servers:
- Win 2003 for main application (NETWEAVER 7.0 2004s)
- HPUX 11.23 for database (Oracle 10.2.0.2.0)
I haven´t worked with solution manager until this update, and of course, I haven´t configured before.
I´ve a mix of terms, possible configurations:
- run SOLMAN_SETUP transaction after update ¿?
- install SMD ¿?
- install/configure SLD (we haven´t configured) ¿?
- create new solution, system components, logical components,...
I´ve tried to create a server, database, system, but I don´t know what is the right procedure.
I´ve seen that there is a transaction called "SOLMAN_SETUP" that I suppose I´ve have to run to configure the new version, but the EWAs configured before de update, runs properly.
Do you know the steps as more detailed as possbible to create the new solution for portals after update?
Does any of this steps/procedure impact into our configured and running EWAs and Goinglive sesions?
Thanks in advance.
Best Regards
Chema
Edited by: tsunix on Mar 29, 2010 9:26 AM

Hello,
Are you trying to get the EWA working for Go-Live check or Solution Manager? Based on my understanding you are trying to get your Solution Manager setup to be able to generate these reports. However, I will provide notes for both incase I am misunderstanding you.
Please review the following notes for getting your system prepared for Go Live checks:
207223    SAP EarlyWatch Alert processed at SAP
1095227 FAQ: SAP Hosting - Early Watch Alerts
207223    SAP EarlyWatch Alert processed at SAP
Also, you can visit http://service.sap.com/earlywatch for more help/documentation on this.
If you are trying to setup your EarlyWatch on your Solution Manager system, then please visit the following URL:
http://service.sap.com/ewa
You may also want to visit this note to see if it helps.
1257308   FAQ: Using EarlyWatch Alert
Thanks,
Mark

Running SOLMAN_SETUP

Similar Messages

Maybe you are looking for