Running SRM 5.5 (SP level 12) on Netweaver 7.01

we are in the midst of planning the implemenation of support packs and have hit a stumbling block regarding SRM and netweaver.
We are currently running SRM 5.5 (SP12) on netweaver 7.0
We will be moving all of our other systems (ECC, BW) to netweaver 7.01. However, we have not found any clear documentation as to whether or not this version will run on Netweaver 7.01. Do we need to move to SRM 7.0 if we want netweaver 7.01?
Unfortunately, we don't have the luxury (resources) at this time to do upgrade SRM, so our alternative would be to stay with SRM 5.5 / netweaver 7.0 and just up the SP level - though this would mean our SRM would be "behind" all of our other systms (NW 7.00 vs 7.01).
Ideally, we are just looking for some definitive (and clear) documentation regarding this issue - any links (or suggestions) would be most appreciated.
Thanks,
Jeff Henke
We Energies
SAP System Administration

Hi,
If you are not upgrading to SRM 7.0, the NetWever should be 7.00 for SRM 5.0.
http://service.sap.com/patches
Regards,
Masa

Similar Messages

How to run MRP at storage location level?

i know to run the MRP at plant level. i want to know to run the MRP at storage location level. what are the setting have to do for that? please can help any one....

Hi,
I think your question is answered by Sarita Doddi.
If you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.
If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
So, planning is not SLoc wise, it goes MRP area wise.
BR
Csaba

Running Macros on 9AMALORE aggregation level

Hi,
I'm trying to run simple macro in SNP (5.0)
I use DP Activities and Background jobs for this.
When I create a Background job, with selection "Select All" from Aggregation level I can choose what I want - "9AMALORE".
When I create a selection in the shuffler ( I have to restrict the selection to one plant only) and use it as Background job selection, I cannot manage to run the macro on 9AMALORE level.
In this case only one selection is available based on the shuffler selection grouping criteria, and unfortunately I can do it only by 9ARE (Resource only) or 9AMALO (Material Location).
Do you know what trick I can use to achieve this?
Regards!

Hi,
I am trying to understand your requirement. Not sure if I have understood this correctly,
When I create a Background job, with selection "Select All" from Aggregation level I can choose what I want - "9AMALORE".
Question - You mean in the /sapapo/mc8d txn you are able to select 9AMALORE as your agg level? What is ur selection id in this case?
When I create a selection in the shuffler ( I have to restrict the selection to one plant only) and use it as Background job selection, I cannot manage to run the macro on 9AMALORE level.
In this case only one selection is available based on the shuffler selection grouping criteria, and unfortunately I can do it only by 9ARE (Resource only) or 9AMALO (Material Location).
Question - Again in the interactive planning, you use shuffler to create a selection id. So here, What is your "Selection characteristics" and what is your "Show Characteristics" (the one at the top). Are you using this selection id in the background job and not able to aggregate by 9AMALORE or are you trying to running the macro in interactive.
Either ways, we shud be able to achieve what you are looking for.
Sorry I am a little confused with your requirement, but I am confident that I can help you, if you can clarify what you are looking for.
Thanks
Mani

Does SRM PPS allow item level technical acceptance of bid?

Hi,
Does SRM PPS allow item level technical acceptance of bid?

Hi,
A technical bid response is made in cFolder for a RFx response from a bidder. In other words, an acceptance of a technical bid response is for all items before proceeding to open the RFx price response in SRM. During awarding in SRM, you can select/reject the item at item level.
So in short, you cannot accept technical bid response on the item level.
Best regards.
YS

IBM Client Access ODBC Driver DB2/400 SQL7017 Unable to run statement with specified commit level #-7017

Changed IBM As/400 system from V4R5 to V5R2 and now get this message when using Access to link to external database the same exact settings on everything I can determine on all computers.
IBM Client Access ODBC Driver DB2/400 SQL7017 Unable to run statement with specified commit level #-7017
I have Commit immediate = *NONE in the Advanced Server Options in ODBC Data Source Administrator. It shows the AS/400 files in the Link Tables list and allows me to add it to the Access table objects, but when I try to open it in datasheet view I get that
error.
What am I missing?

Ouch. That's a lot of paste...
INFO: PATH = C:\oracle\product\10.2.0\client_2;C:\oracle\product\10.2.0
\client_1;T:\SDCHS20N440\Oracle\agent10g\jlib;T:\SDCHS20N440
\Oracle\agent10g\bin
INFO: The flags set for this home (T:\SDCHS20N440\Oracle\agent10g) are:clean
SEVERE: Abnormal program termination. An internal error has occured. Please
provide the following files to Oracle Support : I wonder how "T:" is involved. Looks like you got a management agent on a network drive. If so, is this Home registered with the oraInventory on your machine? Can you try the same install on a machine without any previous Oracle software installed?

SRM 7.0 item level field in PO screen

Hi all,
We have a requirement to add a field for "Shipping instructions" in SRM just like it appears in ECC PO at the item level.
I currently dont have access to SRM 7.0 system.
Can someone confirm if there is a std field for "Shipping instrucions" in SRM 7.0 just like in ECC?
If not,has anyone implemented a custom solution for such a field.If so,how?
Thanks in advance.

Hi,
Its possible to add new texts through customizing - standard SRM provides by default some notes like Internal note, Vendor note etc.
We could create our own text, assign these texts to text schema and then assign text schema to transaction type (SHC for shopping cart). This can be done through customizing and then this new text type will comeup for item.
Regards,
Prasanna

Error when running a JHeadstart generated two-level tree display

Dear All,
I have a simple master detail VO/VO datamodel based on which I'd like to generate a two-level tree display. I've followed the JHeadstart dev guide meticulously.
When I run the page I get an error:
javax.faces.el.PropertyNotFoundException: Error getting property 'name' from bean of type oracle.jbo.uicli.binding.JUCtrlHierTypeBinding
It turns out that this generated code in a region file is the root cause:
<af:switcher facetName="#{node.hierType.name}">

<f:facet name="MutatieSoortTypenNode">
<af:outputText value="#{node.Omschrijving}"/> </f:facet>


<f:facet name="MutatieSoortenBijTypeNode">
<af:outputText value="#{node.Omschrijving}"/> </f:facet>

</af:switcher>
When I substituted the <af:switcher> .... </af:switcher> xml code by <af:outputText value="#{node.Omschrijving}"/>, the page displayed correctly.
Given the fact that the code is generated, there doesn't seem to be much that I can do about it.
We're using JDeveloper version 10.1.3.3.0 and JHeadstart version 10.1.3.2.41.
Any help or suggestion would be much appreciated.
Kind regards,
Ibrahim

Ibrahim,
I cannot reproduce this. You are using a non-production build. Can you upgrade to JHeadstart 10.1.3.2.52?
If the problem persists, you can work around it by creating a custom template for tree.vm which includes the af:switcher statement.
Steven Davelaar,
JHeadstart team.

Running Risk analysis at User Level(CC)

Hi
Please Clear my query, wat is the difference between running the risk analysis at userlevel Violation count by Risk and Violation count by Permission.
violation count by Permission, the total number of violations are 377,569.
Violation count by Risk,the total number of violations are 11,716.
Thanks & Regards

Hi Karuna,
When you perform Risk Analysis at User level and choose violation count by Permission/Risk. Here are the details of each analysis:
1. Violation Count by Risk
This analysis will display the count of how many SOD risks associated with the users existing in each business process like FI, HR, MM, PR, SD.
It will display as a bar graph or pie chart. If you choose each of the business processes and drill down to the particular SOD risk,P001 then you can display how many users have that risk, P001
2. Violation Count by Permission
This analysis will display the count of SOD violations at the action/permission level associated with the users existing in each business process.
If you choose the conflicting functions inside each SOD risk, and then expand on the permission tab you will understand why the huge number of violations it is showing.
In the Risk information screen, in Conflicting Functions, click the AP02 u2013 Process Vendor Invoices link to display the SAP transaction codes and the authorization objects. There are 26 different transactions in SAP to Process Vendor Invoices and another 185 authorization object values u2013 all come preconfigured out of the box.
Choose the Permission tab. Expand Action F-42. Open an authorization object to show field values. By looking at all possible permutations of actions/permissions of one business function with all actions/permissions of the second business function, you can understand how the system arrives at the number of violations.
Hope this will help you understand better.
Regards,
Kiran Kandepalli.

SRM 7 WF - Multi level approval

Hi ,
Currently I am struggling at one requirement in SRM 7 process-controlled WF.
Requirement goes like this.
Lets say . In SC there are 10 items
depending on some logic they are grouped like 3 + 3 + 4
This is achieved using area creation badi.
Also first level approvers for each area are assigned using agent determnation BADI.
Here comes the interesting part.
Depending on the approval limit of the approver next level should get created .
But it may be possible that area 1 ( 3 items ) and area 2 ( 3 items) are approved ate first step itself.
And area3 ( 4 items) may go to multiple level as the value of these 4 items exceeds the approval limit of the approver.
In short,
at first level I need a fork.
and depending on the group (area) value that perticular area only should flow thru multiple steps.
Guys,
I have achieved multilevel and fork parts separately but combining both is really a tough task for me .
Is it possible to achieve such results ?
Pls help me getting through.
Thanks in advance,
Ganesh.

Ganesh
Refer to this document on PC Workflow if this could help:
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/procurement/supplier-relationship-management/process%20controlled%20workflow%20%26%20custom%20brf%20expressions%20for%20complex%20approval%20processes%20in%20srm%207.0
Regards
Virender Singh

Confirmations after SRM Server update to level 9

We are having an issue with regards to Confirmation of goods, we have a po of 300 units and we have confirmed 85 but this has failed there is no figures in the confirmed Qty nor is there a value.
Any ideas?

We resolced this by checking the PORT in EDI (WE21) rfc connections where incorrect

Running multiple copies of an App on one NetWeaver server

Hi there, (V12 with ERP/ECC transactions)
We are setting up our landscapes/environments for development, beta testing, final QA and production. I am wondering if we can combine development and beta testing on the same system.
The obvious concern is that they will have copies of the "same" transactions. If we don't do anything special, the data source name is hard coded in the transaction and as we are on the same MII server, they can't point to different data sources unless we edit the transactions. Is there a way to have a transaction use a configuration of some sort to dynamically specify the actual data source?
Are there any other issues attempting to do this?
Thanks,
--Amy Smith
--Haworth

Thanks Jeremy,
Thanks for the suggestion Jeremy.
Our server is not capable of another instance. It is not easy to get our SAP Basis people to install and configure a new system and we are not allowed to do it ourselves. I was trying to find a way to use our existing instance of NetWeaver/MII to run multiple copies of the application. In J2EE apps I have worked on, it is as simple as copying the software, changing the URL, changing the application config files for the data source and deploying the new duplicate app under a different name.
Seems that in MII the transaction "hard" links the data source name to the data source definition and that link is not dynamically configurable. Would that be a fair statement?
Thanks again,
--Amy Smith
--Haworth

High Level Hardware Requirements - Netweaver 7.0 and Netweaver 7.3 Upgrades

Good Morning,
I order to negotiate new Hardware with our supplier, i need to understand future needs regarding some upgrades we may still have.
I have two systems:
A SAP Netweaver 6.40 (with Adobe Document Services) which will be upgraded to Netweaver 7.0 SP23 and will have NWDI.
A SAP Netweaver CE 7.1 EHP1 which will be upgraded to SAP Netweaver 7.3.
I need to have a estimate for the new hardware needs. I don't want detail right now, just some documentation from SAP with estimate like "... The estimate needs for a upgrade will be 10 to 15% more CPU, 15 to 20% more Memory..." (not just hints based on experience, should be SAP docs stating that).
Can any of you direct me on this documentation, trying to find something like that in SAP but it's not being easy and i need this for a meeting in about 2 hours...
Thanks for all the help you can give me...
Best Regards,
Pedro Gaspar

Hi,
For the upgrades there are some recommendations related to disk size but for RAM and CPU it depend upon the your usage scenario. Upgrade does not demand additional resources. But if you don't have enough resources on the server then upgrade might run slow. So, What i will recommend to you is- do the proper sizing of your target system depends upon what scenario you use with quicksizer tool and then upgrade your server resource before you start the upgrade.
Thanks
Sunny

Can we run Payment medium or dunning in the profit center level also ?

Hi friends
Is it possible we can run a payment medium program or dunning in the profit center level.If it is yes means, how we can run at the profit center level for all vendors and customers
Regards
Aravind
9980838025
Bangalore
India

HI Arivind,
This is possible when in the line item is a profit center.
Use for this the tab Free selection.
BUT.
In a lot of situations there is no profit centers in the line!!
When you make a posting (or from SD) it possible to have 1 line on debtor or creditor and more profit centers on the other line's.
When this is from SD you can create dunning areas based on sales org/ devision/ distr chanel. Then you can use this for dunning
Paul
Paul

SRM 7.0 course codes for Associate level certification

Hi
I would like to go SAP SRM 7.0 Associate level certification, kindly let me know the course codes for SRM 7.0 certification.
currently, i have read SRM.1, SRM 210, SRM 200 & SRM 270 are these manuals are sufficient for SRM 7.0 Associate level certifcation.
Thank you

Hi,
You can get the information from ( training.sap.com ).
C_SRM_71 - SAP Certified Application Associate - SRM 7.0 EhP 1 (The one which you asked for)
C_SRM_72 - SAP Certified Application Associate - SRM 7.2.
P_SRM_71 - SAP Certified Application Professional - SRM 7.0 EhP 1
P_SRM_72 - SAP Certified Application Professional - SRM 7.2
I am not the best judge for those manuals. So I can't suggest you on that part of your question.

Do MacPRo mid 2010 models run with level fan noises or uneven whine?

Apple is replacing my mid-2010 mainly because of a disturbing modulating, up and down, fan noise problem. Not sure of the source. At first thought it was 5870 graphic card, but haven't been able to nail down exactly why.
They claim that these machines run with a very even level noise, and that this breathing or modulating noise is not the norm.
I have read that these machines, relative to earlier models, are quiet hummers, at least relatively.. Do most people with this year's model have machines running at a constant noise level or do the fan noises, even at idle, modulate and whine up and down, even with light usage...or on idle. I don't want a replaced machine with the same issue. I do work in a quiet environment, and don't mind the fan noise, but the modulations of up and down sound like a tunnel and I need to turn off the computer at times. Model is 3.2 ghz quad core, with ati 5870 graphic card.
thanks

I am very much interested in comparison here too. Unfortunately our local reseller doesn't have any Mac pros to compare (they deliver only when you make an order:(). So I have no other machines to compare...
So I've read a lot of forums and generally there's no simple answer anywhere. People say that their hdd/optical is making more noise than fans. That's true to my case. Hdd/optical indeed sound louder than fans. From the other hand, I work in very quiet environment (no street noise, no ventilation noises in the room or whatever) and my new Mac Pro sounds... well loud! Once again - relatively it is QUIET, I can hear older PC from the other room (and the 'other room' connects through a corridor so...). Still, a lot of people mention that they literally don't hear ANYTHING from their mac pros except for hdd/optical operation sounds. I do hear fan noise...
So i was wondering is my room too quiet/ear too sharp;) or is there some kind of a problem with the mac pro and I should bother contacting retailers?
Anybody here who can compare their mac pro's with say mac book pros? I clearly hear fans of my mac book pro (even being idle) in the main working room and mac pro is like 2-3 (may be 4) times louder than mac book pro. This might be OK for tower, but definitely it is not 'dead silent'...
So far I've even tried some iPhone decibel measurement apps (yeah it's not even close to 'pro' measurements but no other means are available to me at the moment). They doesn't notice mac book (most noise measurement devices as far as I've read don't count noises beneath 40 dB for good), but mac pro is about 42-43 dB while idle at some 10 inch from the machine and some 45-46 if I bring the mic like 3-4 inches to the case. Is it like OK or what? Unfortunately all Mac pros I've heard before where in environments where even my 42-46 dB would be completely lost, so i cannot judge if it is OK. It is still one of the quietest towers I've heard/owned but those posts about 'dead silent' and 'only hdd/optical' make me a bit uncomfortable...
Oh, and the modulation. Indeed idle operation has some modulation. As far as I can tell it comes not from varying speed of the fans but rather from how frequencies of the fans inside of the case are different and modulate when added to each other (like those FM/AM in the synthesizers). More to say, there are angles in a room where other frequencies are heard (probably reflections produce some additional modulations)...

Running SRM 5.5 (SP level 12) on Netweaver 7.01

Similar Messages

Maybe you are looking for