Running Sum does not reste at the start of new period

Hi Gurus,
I am using function Running SUm for a variable. The problem is our Fiscal period starts in September. SO the running sum should reset at teh start of every period. but its not happening.
Any Idea why?
Regards

Hi,
As I see it
num RunningSum(measure[;Row|Col][;reset_dims])
You are using to many variables for reset_dims, if you wanna do it this way, create a variable and add this v_FY_Sort_1;Output;Site to that variable then use
RunningSum(COGM RM Cost Total Amt Actual; variable)

Similar Messages

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

The new update does not allow me to start a new tab in the browser

After updating Firefox for Mac, Command-T, the prompt in the File menu, nor the + by the open tab will start a new tab.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. 
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Forward navigation does not work in the Front-end new editor

I just upgraded my GUI to 7.20 Patch level 3 (highest available), and when I use the new Front-end editor, the forward navigation by double clicking does not seem to work. When I double click on a perform statement, the editor takes me to the sub-routine. However, when I double click on a perform on the sub-routine, it goes back to the first one. I saw the following thread
New Abap Editor problem with frontend 7.10 patch 12 HELP
and still does not show any solution. It does work when I switch to the Old Front-end editor.
Any thought or solution, other than switching to Old Front-end editor.
Albert

Thanks for the response. But it is not the issue. I found the problem. This is a system issue and has been fixed in SP19. There is an OSS Note 1279209 that explains the problem and the solution, if you are interested.
Albert

Computer won't start and light just flashes as if in sleep mode. Does not even make the start chime. displays remain dark.

Computer won't start. sounds like it makes an attempt at accessing a hard drive. but then just goes to sleep. no start up noise. no displays come on.

Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

My iBook G4 does not start or boot. The screen does not light and the start up chime does not sound. What should I do? Please help.

But I think it still works since I hear noises inside the machine and the caps lock still lights up. It just won't start.

Hi, Toby. Welcome to Apple Support Communities.
Have you tried resetting the PMU?
http://support.apple.com/kb/HT1431?viewlocale=en_US
This is the first troubleshooting measure an Apple Authorized Service Provider would try.

After installing FF 6.02 on Windows 7, the icon does not appear on the desktop and the program does not appear in the All Programs menu

I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.

Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

The build directory of the test run either does not exist or access permission is required.

i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
Roey

Hi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I try to start Firefox I get Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

I get this message when I try to start Firefox after first logging on after turning on the computer.
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
Have rebooted. Works when Administrator logs in, just does this in my user profile. Have also re-intalled. Mo change in my User account.
Firefox was working fine for the last 3 1/2 years. Any suggestions?

Firefox is "hanging at exit" when you exit/quit Firefox. 
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Hey, I need to download the OS onto my iPhone 3GS, however, when I plug my phoneinto itunes it does not give me the option to do so, I am currently running 4.2.1. Can anyone help me?

Hey, I need to download the OS onto my iPhone 3GS, however, when I plug my phoneinto itunes it does not give me the option to do so, I am currently running 4.2.1. Can anyone help me?

irapidslammz wrote:
I can not sync it because when I plug it in it says that the apple mobile service has not been started.
Type " apple mobile device service" into the search bar at the top of this page by Support and read the resulting help article.

Sometimes Firefox will not open, telling me, it is already running. It does not show in the task manager and the only solution is to reboot.

Firefox is running. I close the program. I try to reopen it. I get an error message: Firefox is already running. It does not show in the task manager, nor anywhere else. I can not close the old version, nor start a new one. I have to reboot.

Did you look in the Processes tab in the Task Manager?
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

Why does firefox stop loading then when i close it and try to open it up again I keep getting this message:Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system

Firefox will just stop loading/ connecting to the internet. The gray circle will just continually move but it never turns green to load the pages. I know it's not my internet because my internet explorer works just fine while this is happening to firefox. So I close firefox and then try to re open it but I get the message: Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. So I wait a little bit then try and re open it and still get the same message. I then go into my windows task manager and try and end the firefox proccess but it won't end. So I restart my computer and firefox eventually starts acting up again.

For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

Format of the initialization string does not conform to specification starting at index 97 while uploading .xlsx file

Format of the initialization string does not conform to specification starting at index 97.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentException: Format of the initialization string does not conform to specification starting at index 97.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Running Sum does not reste at the start of new period

Similar Messages

Maybe you are looking for