Running SWF in standalone player, 6680, N80

Hi,
I'm new to Flash Lite 2 development. I've created a small swf
file using Flash 8, in which I used some animation and some
ActionScript code (1 .fla and 2 .as files).
I've set the "Publish Settings" to "Flash Lite 2.0" and
"ActionScript 2.0" and published my swf.
I am trying to test this swf on my Nokia N80 and 6680 phones,
on each of which I installed Flash Lite Player 2.1 for Symbian
(N80: v.3.0 and 6680: V.2.0 FP2). The player works on both phones.
However, neither phone runs my swf !!
On the N80 I'm getting "file is corrupted" error message from
the Flash Player. I've tried to change my pblish settings but it
won't let me use Flash Lite 1.1, because I've used ActionScript 2.0
APIs (see attached Output errors below).
On the 6680 I'm getting "Messaging: Unkown file format" error
message (Flash Player is not even launched).
I would appreciate any kind help on this.
Thanks.
[Output window error when trying to publish as FL1.1]

rubnov » On devices with Flash 2.0 preinstalled, SWF
open directly in Flash Player with no user interaction (i.e: you
can open them from the file browser).
Flash Lite 2 "Developer Edition" is a different beast. It's
not even signed, so you'll get a warning when installing it.
Honestly, if your user is able to install the current Flash
Player I don't think it'd be a problem for them to open the player
and then loading the SWF from there.
Current Flash Lite 2 users belong to two groups:
* Those with "new" terminals (Nokia 5200, 5300, etc...) that
already have Flash Lite 2 installed and won't notice this problem.
* Developers/power users that have manually installed Flash
Lite 2, and won't have a problem with opening the SWF files from
the player.
OTOH, it would be cool if Adobe could get the player signed,
so installation becomes easier. Also, signing could also mean that
the newly installed player "takes over" the ability to open SWF
files, thus negating the need to open them from inside the player.
Just my .02.
Ale Muñoz
http://sofanaranja.com
http://bomberstudios.com

Similar Messages

  • Unable to launch swf in standalone player

    I'm unable to launch swf's with the standalone player from
    within flexbuilder, it will always use the browser.
    I've unchecked the option 'Generate HTML wrapper file' from
    the 'Actionscript Compliler' settings menu and I've tried to force
    it to use the debug player to the best of my knowledge.
    I'm on OSX 10.5.1 ( macbook ) and using FlexBuilder 3 beta3.
    I've done two reinstalls of the OS, and the problem still comes up.
    I've installed FlexBuilder first and then Flash CS3. I've prayed to
    the internet search engines with no sign of hope, so please
    adobe... you're my only hope :)
    -Tony

    Hi toknee,
    There was a bug related to this problem. The next FB release
    should have the fix.
    Here is the bug URL:
    https://bugs.adobe.com/jira/browse/FB-11228
    thanks,
    Mihai

  • Adobe flash player and run swf

    I creat a swf file with software demo builder version 9. but when run it with flash player version 11.8.800.94, flash player dosen't have any toolbar in below for move forward and move back video.but other swf file that creat with version 8 demo builder dosen't have any problem. meanwhile when I run swf file flash player show below error.
    Thanks...

    It seems that going to Preferences>Security> Check allow plug ins, then manage sites, and then allowing one site allows all??? Seems like a lot to go through.  I have installed the player 4 times now and just got it figured out!

  • How can i test my web applications SWF in the standalone player?

    I have been using flash builder for a bit, and i love it!, but i don't want to test webb applications in my browser, i want to be able to launch them in the standalone player or debugger. After numberous google searches, it seems my flash builder IDE has something wrong with it, ( Even after re-installing it ) because when i try to make a new launch configuration, it doesn't have a field to accept a run or debug path. only a path for the html file used in the browser. This conflicts with all of the adobe help posts . I'm stuck here. can anyone help? thanks.

    I would avoid using <center> tags, they're deprecated (http://www.w3schools.com/TAGS/tag_center.asp)
    instead I would do something like
    <div style="margin: 0px auto 0px auto; width: 800px;"></div>
    put your content inside that div and it should be centered. Set the width to whatever you want.

  • How to customize title of standalone player?

    I have a small Flex based calculator that I need to publish
    as a standalone .exe
    I open the SWF in the standalone player, and File > Create
    Projector.
    I can rename the file, but the title of the player window and
    the tab on the windows taskbar says "Adobe Flash Player 9".
    Is there any way to generate the projector and have the
    titile be sometthing different? It makes sense, since the player is
    running, that it identifies itself, but I was wondering (for
    application distribution) if there is any way to change it somehow.
    Thanks!
    -- TC

    See
    http://www.macromedia.com/software/flash/about/

  • Need third party standalone player

    Can anyone recommend a third-party Flash standalone player
    which will play .swf's? I need to have my content play NOT via a
    browser and I do not wish to publish as a self-contained file. This
    is intended for my co-workers who do not have the Flash source
    software installed.
    Any suggestions?

    i did a google search for "flash stand alone player" and
    found this:
    http://www.globfx.com/products/swfplayer/v
    --> Adobe Certified Expert *ACE*
    --> www.mudbubble.com
    --> www.keyframer.com
    Kirk Wicks wrote:
    > Can anyone recommend a third-party Flash standalone
    player which will play
    > .swf's? I need to have my content play NOT via a browser
    and I do not wish to
    > publish as a self-contained file. This is intended for
    my co-workers who do not
    > have the Flash source software installed.
    >
    > Any suggestions?
    >
    >

  • Standalone player (projector) for Linux 64?

    I'm looking for a standalone player (projector) that will run on 64 bit linux (specifically ubuntu 11.04).  There was a projector included w/ v10 but it appears to be 32 bit only.  Is there or will there be a standalone player for linux 64?  I need this to run automated tests (FLEX SDK w/ TeamCity) on a headless box.
    Thanks!
    Jerry

    i am looking for this too, any ideas?

  • Problems with standalone player on myspace

    Can someone help me with the standalone player on myspace.
    The player is supposed to start automatically. On my computer, it
    does not work at all neither with IE7 (beta2) nor Firefox. Please
    help!

    panipro wrote:
    > Can someone help me with the standalone player on
    myspace. The player is supposed to start automatically. On my
    computer, it does not work at all neither with IE7 (beta2) nor
    Firefox. Please help!
    standalone as the name says "stand alone". it runs on desktop
    not in the browser.
    In fact, security will never allow to run standalone in
    browser nor any type of
    such file for that matter.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Passing flashvars to standalone player

    How does one pass flashvars to the standalone player? The
    executable doesn't seem to take any arguments, doesn't parse URLs
    with variables (e.g. file://movie.swf?var=value), and doesn't make
    use of any environment variables I've tried.

    Yes this is possible with our Third Party Tool Jugglor.
    Read this
    http://flashjester.com/index.php?section=faq_search&search=command%20line#250
    Jugglor
    http://www.jugglor.com
    Regards
    FlashJester Support Team
    e. - [email protected]
    w. -
    http://www.flashjester.com
    There is a very fine line between "hobby" and
    "mental illness."

  • Flash Standalone Player

    After reading a post that helpfully informed how to download files by double clicking on them in Safari's Activity window I managed to get some Flash files from YouTube.
    When I double click on them I am asked for a default application - which I reckon should be Flash Standalone player - but the only one I can get to open the files is VLC.
    How do I get a Standalone version of Flash or has it been installed and I can't find it? I've been to the website, downloaded the installer but I don't see any option to download or install a standalone app.
    Ta.

    Anyone who encounters this issue please give it a vote in Adobe's bug base
    Bug #3363321: Creating a standalone projector from a SWF file is still broken in Flash Player 11.5.

  • Non-Debug version of standalone player?

    Both Flex Builder and the SDK include the debug version of
    the standalone flash 9 player. How to I get the release (non-debug)
    version of the standalone player for Windows? Does it exist?
    I see a place to download the release version of the
    standalone player for OSX but not for Windows.
    Thanks

    And the answer is...
    http://www.adobe.com/support/flashplayer/ts/documents/tn_19166/Install_Flash_Player_9_Acti veX.zip
    (Until the link breaks some day...) Adobe really hid this gem
    well as far as I can tell, buried in the flash install trouble
    FAQs. But whatever, happy now.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19166&sliceId=1

  • Files not bundled with standalone player

    When creating a Mac projector file from Flash CS4, I'm only getting the standalone player app (13MB) not the project files bundled together. Before I encountered this problem, the final projector files were around 25MB. I've reinstalled Flash and am still having the problem.
    Luke

    What keeps you from crossgrading if you've got other FCS apps?
    Here's another option. Get Apple Motion used. Then crossgrade to FCS for 200[total it's a freakin deal]! Where there's a will there's always a way...Hey.
    http://www.apple.com/crossgrade
    Power Mac G5 2GHz iBook g4 1.42GHz Mac OS X (10.4.7) 2.5GB ram 500gb Micronet Platinum

  • What does "Running swf tags for frame" mean?

    it is under the "other" and "swf processing" section of total frame time.
    Thanks,
    Grat

    Hi,
    We have a iPad 3 application that loads a LOT of remote swfs that is used for graphics only, but we are getting slower fps for every swf loaded.
    The remote swfs are between 8-10kb and have only 1 frame and no tweens or code, and when they are loaded we stop them(mc.stop()) and set both enabled and visible to false and never add them to the displaylist.
    And as the attached image shows, "Running SWF tags for frame" seems to take all the frame time, the image shows when the app is idle.
    Is it possible to disable a swf completly?
    Thanks,
    Simon
    (iPad3 iOS6.0, Release version, Apparat-TDSI enabled, Air 3.6, 20-30 remote swfs)

  • How to Run Windows Xbox music player using autoit

    Hi,
    I am doing some automation on windows.I wanted to play AV file in windows 8/8.1 default xbox player through automation.
    I did not find the xbox player exe or so. I am using autoit for automation. Is it possible to run video on xbox player using autoit?
    or any other simple way how i can run av in xbox player using automation

    Hi,
    Hi,
    As the issue is specific with Xbox player , you may contact Microsoft Xbox Player Forum for further assistance on the issue:
    Contact - Xbox Player Forum: http://www.xbox.com/en-US/forums
    Please revert for any clarification on this or any Windows issue. We will be glad to help you.
    Roger Lu
    TechNet Community Support

  • Change standalone player version in .exe?

    I need to publish an .exe with Flash Player 9 embedded as the standalone player. I have CS4, which embeds Flash Player 10. Is there a way to change the standalone player to version 9 without using CS3 to export the .exe?
    I have attached a .jpg displaying visually what I need.
    Thank you for anyone who can provide assistance!
    - ME

    After several days of putting things together, I have successfully gotten CS4 to export different standalone player versions. Here are the steps:
    1.) Go to http://kb2.adobe.com/cps/142/tn_14266.html and download old debug versions
    2.) Navigate to Flash folder, rename Flash 10 player to "FlashPlayer2" and paste, in my case, version 9r45, rename as "FlashPlayer"
    3.) Relaunch Flash CS4, export as .exe, and it exported as version 9r45... now they interchange easily
    All of this was necessary because of the FullScreen bug in v9r115 and above to v10. I went back to 9r45, changed the casing of the string values, and it worked perfectly.
    Hopefully this will help others in the future.
    Info on v9r115 player bug...
    http://www.northcode.com/blog.php/2008/03/16/Problem-with-Fullscreen-Flash-Projectors
    http://www.northcode.com/blog.php/2007/09/11/FSCommand-and-getURL-Bug-in-Flash-Player-9

Maybe you are looking for