Running Sync BPEL process doesn't show any HTML form /XML source for input

Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...

Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas

Similar Messages

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

Async process to sync bpel process

Hi all,
I have one aync bpel process which invokes sync bpel process. In sync bpel process, it has only one assign activity, which assigns input to output. Iam trying to test this scenario using test suite available in 11.1.1.2.0.
I am receiving a time out fault. Can any one let me know, why this error occurs even though my sync bpel process doesn't have any wait or complex activities which takes long time to process.

Raghavendra,
You should check the syncmax wait time parameter on the server. It is this parameter that causes synchronous interfaces to time out .
- santosh

Which event occurs when process any Html form

Hello Guys,
In my application i am process some html Form. As well iam using JEditorPane for displaing Web pages. All the Listner is working well. I can display any web form in JEditorpane .
My Question is that when i click button "submit" in any Web form it's working/process but which event Occurs.I need to change the Application title through web forms.
Thank'x in advance

Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas

Tools sync now doesn't show any progress bar???

I have created sync module for firefox.
But when i click on : Tools > sync now
Why it doesn't show any progress bar???
Firexfox team should look into this matter.
I love firefox.
Best Regards,
Jason Malaysia

Yup Okay..
But i'm now wondering, if it run background:-
Where does it update sync to?
Is it into my firefox account?
Where i can see my backup bookmarks?
Best Regards,
Jason Malaysia

French characters in run time parameter values doesn't show up in emails

We have a custom workflow with configurations to send email when a request is assigned to a person and also to send email on request rejections.
We are encountering following issues with respect to French characters that are available in the message body and message subject.
Issue 1:Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. Since the message body contains French characters we have used ISO-8859-1 encodings to render the message properly to the user. The message body also has some run time content from the task payload.
For e.g. À titre de responsable fonctionnel, une demande d''approbation pour un accès informatique vous est assignée.
Accès informatique demandé : <%/task:task/task:payload/ns1:ObjectDetails/ns1:name%>
In this case all static text values are rendered properly to the end user in his email. However the French characters in run time parameter values doesn't show up properly and has some weird characters.
Issue 2: Unable to change the default subject shown in the approval task emails i.e. Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. By default it shows Action Required: Approval. How can this default value be changed?
Issue 3: We have an Email Activity in Bpel process that follows a task rejection. The emailpayload is ISO-8859-1 encoded and works for the message body. However the email subject shows up with ISO-8859-1 encodings itself and doesn't convert to proper string in the end user's email. Is there any specific setting required for french characters in subject?

Hi Kulwinder,
Thanks for your reply.
In fact I do, I've follewed the "Using SAP HANA Variables with SAP BusinessObjects BI4.0" guide.
Please note, when I use a fix value to parameter is working fine, for example:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$','20130530'))
But when I set prompt of the DataFoundation parameter I get and error, this is my sentence:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$',@Prompt(FECHA)))
To me is very curious that I can't enter a value in the DataPreview in Hana Studio, because is not requested, even when the input parameter have been set as mandatory
Have you idea of what could be happening?

BPEL Processes are not showing in BPEL Console after OPMN restart

Hi All,
BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
Can some one help on this?
Thanks

Vikky,
Are you using 10g?
If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
It might relates to permissions, or DB issues etc....
Arik

Photo stream doesn't show any photo

Listen, I have this problem when I open iCloud photos, folder "Photo Stream" shows, I open it and it doesn't show any photo taken on my iPhone, but I can play slide show and see every single photo, but only in that way with slide show, how can I fix this? It worked alright for a few days, now it's somehow different, help please.....

GimmeCheezburgers
This solved my questionRe: I upgraded to iOS6 and now I can't save photos from facebook app?
Sep 21, 2012 7:05 AM (in response to GimmeCheezburgers)
Nevermind... figured it out.
If anyone else runs into the problem, here's the fix:
Settings > Privacy > Photos > turn facebook to ON

My App Store Doesn't Show Any Thing , and not working .

Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
I've Tried There Solutions:
Reset PRAM
Delete App Store Cache Files
Signed Out of Itunes And and signed in again
clear History and web site data in safari
But Nothing Changed .
(Sorry My English is Not Good at all , But i'll be thankful if you help me )

Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
Step 2
Log out or restart the computer.
Step 3
Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
Step 4
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
After testing, restart as usual (not in safe mode.)
Step 5
If possible, connect to a different network and test.
Step 6
There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm.

Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.

Pages doesn't show any page content.

I have pages 4.0.1, and it doesn't show any page content. How can I solve this?
Thanks

Pages 4.0.1 is very old & is likely the cause of your problem. You should be using Pages 4.0.4 in Snow Leopard. iWork '09 installed from the retail disk or from the downloaded trial must be updated through Software Update. If you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

Am told firefox is already running , but task manager doesn't show it

am told firefox is already running , but task manager doesn't show it. I installed Firefox 3.6.10 on a new computer (win 7 home premium), deleted the profile given and copied my old profile in its place (win vista premium). I get the above message and am told to close the existing process, or restart the system. Can't close and restarting doesn't help. Please solve this for me, i so don't want to use Internet Explorer

g'day people... a dude called "moopenguin32" showed me the way... alleluia
1. Copy your Firefox shortcut (what you click on to open Firefox) to the Desktop.
2. Right-click on it and click on Properties.
3. Go to the end of the text in the "Target" field. The end will say: firefox.exe"
4. Enter a space followed by: -profilemanager
5. The end result will look something like this: "C:\Program Files\Mozilla Firefox\firefox.exe" -profilemanager
6. Click OK to save the settings.
7. Double-click on the shortcut you just changed.
8. Delete the profile listed. It shouldn't matter that you're deleting it because you're trying to restore a profile anyways. You should have the profile you're trying to restore saved elsewhere.
9. Close the profile manager.
10. Start Firefox using your regular shortcut. Firefox should open properly. Close Firefox.
11. Now to restore your profile, open the profile folder you have backed up and copy the contents of it rather than the actual folder.
12. Go to your existing Firefox profile and open it.
13. Delete the contents of the existing Firefox profile.
14. Paste the contents of the Firefox profile that you're trying to restore (the one you copied in step 11).
15. Open Firefox and everything should be there (including your extensions).

"Dependecies" tab doesn't show any information for a selected table version 4.0

Hello,
I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
Oracle database is v11.2
Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
Thank you,
Milan

Hi, here is my example of XML extension showing referencing tables:
Save the following XML to a file.
<items>
<item type="editor" objectType="TABLE">
    <title><![CDATA[*Referencing Tables]]></title>
      <query>
        <sql><![CDATA[SELECT
cfk.owner "OWNER",
cfk.table_name "TABLE NAME",
cols.column_name "COLUMN",
cfk.constraint_name "CONSTRAINT NAME",
cfk.delete_rule "DELETE RULE",
'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
FROM
sys.all_constraints cpk,
sys.all_constraints cfk,
sys.all_cons_columns cols
WHERE
cpk.owner = :OBJECT_OWNER AND
cpk.table_name = :OBJECT_NAME AND
SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
cpk.constraint_type in ('P', 'U') AND
cfk.r_owner = cpk.owner AND
cfk.r_constraint_name = cpk.constraint_name AND
cfk.constraint_type = 'R' AND
cols.owner = cfk.owner AND
cols.constraint_name = cfk.constraint_name
ORDER BY
cfk.owner, cfk.table_name, cfk.constraint_name,
cols.column_name]]>
      </sql>
    </query>
</item>
</items>
In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

IPhoto app doesn't show any photos from my photos app

I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty. When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could. Is this a known iOs6 bug?

Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

Running Sync BPEL process doesn't show any HTML form /XML source for input

Similar Messages

Maybe you are looking for