Running Test fmb is permitted in development installation only

Hello,
Exists the options like in SUbject?
all work is done from admin server because no WLS_FORMS services, therefore....

The only reason the test form runs as a default is because the parameter "form" includes "test.fmx" in formsweb.cfg specifically in the [default] section of the file. If you do not want any form to run by default, set the parameter "form" to a null value. For example, form=
If you only want it available with a specific configuration, remove the form name as mentioned about from the default section and add it to a custom named section in the bottom. For example:
[development]
form=test.fmx
pageTitle=This is our Development configBy doing the above, the only way the test form would be seen is if the user specifically entered config=development in the url.
I hope that help, or maybe I did not fully understand what you wanted.

Similar Messages

Running test.fmx . Jinitiator installation screen re-appears

On windows 2000, i tried to run the form test.fmx on the web by
calling "run a form on the web menu", I verified before that
ifweb60.exe and ifsrv60.exe has been correctly launched, and
running. But Every time 'Oracle Jinitiator' Installation Screen
is appearing for installing jinitiator. After installing, a
white screen appears with a 'Done' message at the bottom and the
form did not run. What must i do ?

Hello
Tell me that version of IA these using, the version of the
Developer and of the Jinitiator.
Then you tell me if you configured the files 6iserver.
formsweb.
I wait your comments to be possible to help.
Greetings

Test.fmb and test.fmx confusions

Hello to all,
I have installed 10g database and 10 developer tools on local machine. I created simple form TEST.fmb (created in form builder) based on three tables and it works just fine when it is run from form builder !
But after I compiled the form from TEST.fmb the form builder created in the same folder file called TEST and in description it says that it is Oracle Developer Form Compiled but without extension fmx ! Is it OK ?
Where I should put this form in order to be accessible from another machine in the same work group and what additional modification is nedeed to acomplish this goal ?
thank you
edo

If it runs ok from the builder it probably not going to be the cursor issues outlines above. I would guess it might be a configuration file setting since running from the builder your config selections come from a different place than when you run outside the builder.
If using Jinitiator - set the console to level 5 (just type 5 in the Jinit console) and this will give you a long output of debug messages - hopefully your error might be more obvious when you look at this trace.
Regards
Grant Ronald

Run test uut entry point only once

Hi,
I want to avoid that users can run test uuts entry point more than once. I use an operator interface written in CVI 7.1.1 and netry point button is deactivated when run state changes. But after loading the application sometimes is too slow so the user can press this button twice before it is deactivated.
So is there any possibility to avoid running this entry point more than one time?
Regards
Steffen

Steffen,
Thank you so much for the help. You recommendations worked perfectly. Both of us implemented more or less the same behavior in our operator interfaces, although we used slightly different methods. Here is what I did:
I established a count variable in my operator interface that is initially set to 0. Each time the Test UUTs or Single Pass button is pressed, I increment the count by 1. I determine that the Test UUTs or Single Pass button is pressed by registering for and handling the Application Manager PreCommandExecute event. In my callback for this event, I examine the returned Command and look at its EntryPointIndex property to see if the index is 0 (Test UUTs) or 1 (Single Pass). If it is, I increment the count variable count by 1. If the index is not 0 or 1, I do nothing. Once execution has stopped, I reset the count variable back to 0. I do this by registering for and handling the ExecutionView Manager RunStateChanged event (as you recommended). In my callback for this event, I examine the returned newRunState to see if it stopped (numerical value of 3). If it is, I set the value of the count variable back to 0. If it isn't stopped, I do nothing.
This method is basically the same as the one you propose. This method allows you to use the built in TestStand buttons instead of having to use those found in your development environment. The only drawback is that they don't disable and gray out during execution; they just do nothing when an execution is in progress and the operator presses them.

Error while running test configuration

Hi,
I created a test script using SAPGUI and test configuration.In test configuration,i created 2 variants other than default one.Downloaded the variants and executed it. It was giving error "Error inn ecatt command SAPGUI","Cannot Find Screen Element in Replay Mode". When i run test script alone,its working fine.
Please tell me how to correct the problem.
Thanks,
Aparna.

Hello Aparna,
As per the error description give by you , it means that when you execute the script recorded the eCATT control is unable to find the screen element in the screen recorded , possible reasons may be that the control may be in some other screen and trying to find the screen element of the other screen in the present screen.
Solution to this may be check the connection id and the session id of the SAPGUI where the script is failing.
Ideally all the connection id and session id of all the SAPGUI's recorded has to be same so that execution takes place in a single session.
Hope it answers your question.
Thanks and Best regards,
Ajay

Mobile Application Development Installation failed. Error Code: U44M1P7

After install of DW CS5.5, I tried to update DW CS5.5 and received the following error message, does anyone know how to fix this?
Mobile Application Development
Installation failed. Error Code: U44M1P7

Hi Stillcrazy,
Welcome to Adobe forums.
See the solutions in this article http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html and let us know if you still need help.
Thanks,
Preran

I am trying to install xcode on a macpro running OSX 10.6.8 . It installs, but with the error that there is no unix support.Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?

I am trying to install xcode on a macpro running OSX 10.6.8 . It installs, but with the error that there is no unix support. Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
thx,
Pandabig

Xcode 4.x cannot be installed on Snow Leopard. You need a 3.x. So if that is what you used then yes, you need to install lion. If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon

How to run Test Configuration in XI

Dear all experts,
I am new in SAP Netweaver and I am trying to get certify my products. Thus, I have some questions and appreciate you can help to clear my doubts below.
1. I have finished configuration in XI, but when I try to run Test Configuration from the Tools, it show error in Receiver Determination stage. Can anyone help to explain how to perform this test? and what should I put in Payload?
The error message:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://pwdf0880.dmzwdf.sap.corp:50080/sap/xi/simulation?sap-client= User: XIDIRUSER
2. My Scenario is a Web Screen (asp.net) calling and passsing a parameter to XI Server, then XI will execute a BAPI to return some data. Can any expert out there give some sample codes in asp.net that send HTTP Request to XI Server?
3. What is the use of WSDL in XML format?
Thanks in advance.
Best regards.
Message was edited by: Adam Lee

Hello Adam,
You sent this other question (below) to my email box. I will answer it here so that other people will benefit from it. To unlock an object which someone has locked, goto homepage of SAP Exchange Infrastructure --> Click on the link at the upper right hand side called "Administration" --> Enter the User name and password (you might not have authorization) to display page --> Select "Lock overview" (left panel) and remove the lock of your selected user.
I've gone ahead to remove it for you.
Also, I did a check on your IS in the Integration Directory called, IS_DISPLAYPO_SUPPLIER, and there was no error. Did you fix it already? It looks like you have everything correctly defined in my first pass. Please let me know if you are still stuck.
Have you also asked your consultant to look into this?
Regards,
John Ta
From: Adam Lee [mailto:[email protected]]
Sent: Monday, Oct 09, 2006 12:19 AM
Subject: RE: Category "SAP NetWeaver - Exchange Infrastructure " has been updated by Adam Lee
Dear John Ta,
Thank you for your kindness and willing to help.
I have sent out contract for the certification. Tuhin is the assigned
consultant to us.
By the way, I have one more question here hoping you able to help me. I
would like to delete an object in XI, but it show an error "Object Data Type
DT_PO_RESP | http://ep-net.com/xi/eProcurement/scm/40 currently being edited
by user EPASIA"
It seems that this object is being locked as I do not have any screen
editing this object. Appreciate if you can guide me how to unlock this
object and delete it?
Thank you.
Best regards,
Adam Lee.

Running Stacked Queries in Oracle SQL Developer

Is it possible to run stacked queries in Oracle SQL Developer???
Something like this...
SELECT *
FROM TABLE_1
SELECT *
FROM TABLE_2
SELECT *
FROM TABLE_3
And give my 3 different result sets in my Query Result window
I tried "BEGIN" and "END" and Oracle SQL Developer did not seem to like it.
Can someone let me know if this is possible and what the syntax might be???
Thanks in advance for your review and am hopeful for a reply.
PSULionRP

Wrong forum!
Please post this in the sql developer forum.
SQL Developer
You can run multiple queries exactly the way you posted them but you need to use F5 - the run script toolbar button.

Run sql statements in PL/Sql Developer without installing Oracle database?

Hi all,
I wish to ask is there any possibility to run Run sql statements in PL/Sql Developer without installing Oracle database?
Regards.

Hello Jimmy,
this is the forum for the tool SQL Developer and, as the title says, *(Not for general SQL/PLSQL questions)*.
PL/Sql Developer is not an Oracle tool, but from allound allroundautomations.
And you need access to a database to run SQL statements. This does not need to be one installed by yourself.
Regards
Marcus

Code runs correctly when compiled by SQL developer but not SQL Plus

I have a rather large package body I need to deploy and compile ... It's big and complex (I inherited the project). Our it dept is huge and scripts are deployed by the dba team and they seem to only use sql plus. My code deploys and runs fine when compiled in sql developer. Once I compile it from SQL plus it stops working. It runs and using debug statements I can see the values are correct but it no longer inserts the data into the proper tables. I get ZERO errors or warnings when this is compiled in SQL Plus and no errors are generated from the code at run time. I've diffed the extracts of the code from the DB after each deployment and the only difference is the blank lines which SQL Plus strips out when you load the file. Has anyone run into anything remotely similar and if so how did you solve it? I've tried modifying the code to no avail, adding in comments to preserve the white space makes no difference. The thing that really kills me is that there is no error at all.

Ok this is the problem area.... vReplyMessage is a clob. I've replaced it in this section of processing with a varchar2(32000). And now it works. I still would like to know why though. Nothing is changed when I load it though sqlplus or sql developer but this line " update swn_recip_response_t set SWN_RECIP_RESPONSE = vTextReply where notification_id = v_notification_id; " would never execute with the clob. Logging showed that the clob had the correct value though. I am puzzled.
begin
call_SWNPost('http://www.sendwordnow.com/usps/getNotificationResults',vMessageText, vReplyMessage, v_status_code, v_status_phrase, '');
exception
when others then
raise eJavaException;
end;
vTextReply := dbms_lob.substr( vReplyMessage, 32000, 1 );
if (vDebug) then
update PEMS_PROD_2.SWN_POST_LOG set response = 'notif_id == '|| v_notification_id || 'status code == '|| v_status_code|| ' '||vTextReply where log_pk = vLogPK;
commit;
end if;
IF v_status_code = 200 then
v_has_error := 'N';
ELSE
v_has_error := 'Y';
END IF;
-- we handle all exceptions below in case something goes wrong here.
-- this area can die silently.
vTextReply := replace(vTextReply,'<getNotificationResultsResponse xmlns="http://www.sendwordnow.com/usps">', '<getNotificationResultsResponse xmlns:xyz="http://www.sendwordnow.com/usps">');
begin
insert into swn_recip_response_t(notification_id) values (v_notification_id);
exception
when others then
if (vDebug) then
err_num := SQLCODE;
err_msg := SUBSTR(SQLERRM, 1, 100);
insert into PEMS_PROD_2.SWN_POST_LOG (LOG_PK, create_date, REQUEST, notification_id) values(pems_prod_2.swn_post_log_seq.nextval,sysdate,
'err_num - '||to_char(err_num)|| ' error_msg - '|| err_msg, v_notification_id);
commit;
else
null;
end if;
end;
commit;
begin
update swn_recip_response_t
set SWN_RECIP_RESPONSE = vTextReply
where notification_id = v_notification_id;
exception
when others then
if (vDebug) then
err_num := SQLCODE;
err_msg := SUBSTR(SQLERRM, 1, 100);
insert into PEMS_PROD_2.SWN_POST_LOG (log_pk, create_date, REQUEST, notification_id) values(pems_prod_2.swn_post_log_seq.nextval,sysdate,
'err_num - '||to_char(err_num)|| ' error_msg - '|| err_msg, v_notification_id);
commit;
else
null;
end if;
end;
commit;
-- parse through the XML document and update the notification and recipient records
-- parse the clob into an xml dom object
begin
vReplyMessage := vTextReply;
...

Is it possible to query software inventory report for Oracle SQL developer installation?

Hi all
My company requires to generate a report of all kinds of Oracle database access tool. I can find Toad installation from Add/Remove Program and therefore can query for Toad.
However, Oracle SQL developer is using Java. I cannot see an entry for Oracle SQL developer from Add/Remove Program. Is there a way to query inventory for Oracle SQL developer installation?
Thanks a lot.
Regards
Lic

You might be able to use software inventory to report on the version of sqldeveloper.exe.
As the app looks like just a zip you extract to a custom location that might be one method.

How to "Run Test UUTs" from ParallelSeq?

Hello,
i´m starting a parallel-sequence in Seq-file load in the model when starting TestStand. How can i execute a "Run Test UUTs (F5)" from wthis parallelsequence to run the currrently loaded sequence?
Thx
Regards

Hello,
I don't understand your problem. Could you explain it a bit more detailed?
Could you post your sequence file?
Thanks and regards,
Wolfgang Z

Validation before running test script?

Hello Gurus,
I am getting started to learn eCATT and with different posts availabe I was sucessfully able to create and execute simple scripts. Thanks for posting all this and I am now able to create all four objects in eCATT. A special thanks to Sapna Modi for her step wise information.
However, I have certain conditions to check before running test script. Like I want to check a table entry and if the entry exists then the test script should be executed. I tried with ABAP ...ENDABAP and TCD recording. I wasnt able to do it.
Could anyone of you please let me know how we can accomplish this? Also when the entry isnt there in the table the test script should fail and appropriate message should be displayed in the log.
Also, please let me know if we can use TCD and SAPGUI commands within ABAP ENDABAP commands.
Your help is highly appreciated...
Regards,
GS...

Hi,
For your negative testing,if your entry is not listed in the table.Eventually CHETAB command wil fail and you see a Red log.
For not executing the script,if your check fails.Please add some condition..
In CHETAB/GETTAB table commands,Say you passed a value and it is found in the table.Then the return value for the CHETAB/GETTAB would be zero.If it is failed it return Non-zero values.This values can be captured by using the command &SUBRC.
So please apply a condition for your next script to execute..
If &SUBRC = 0
give the script name
else
log(condition failed)
endif.
just add this code in between your code..and place the script you wanna execute after your check is successful.
Hope it answers your doubts.
Regards,
Venky

Running Test fmb is permitted in development installation only

Similar Messages

Maybe you are looking for