Running the 6.1 Runtime Engine with 2009 Installed

I have 2009 Developer's Suite LabVIEW installed and am using it regularly. I recently obtained some executables which only run under the 6.1 Runtime Engine. I have downloaded the 6.1 RTE, but have not installed it. Do you think that installation of the 6.1 RTE will have any adverse effects on my 2009 installation? I do not want to install LabVIEW 6.1, just the RTE.
Solved!
Go to Solution.

As long as the program doesn't need other "drivers" such as earlier DAQ it should be ok, although usually it is a very good idea to install in the "original order" i.e., 6.x then 2009. I have RTE for several versions installed at the moment, but they were incrementally installed over the last couple of years.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Similar Messages

Make the installer for my executable run the DAqcarddriver and runtime engine installer automatically

*Hi
I would like to know how to make the installer for my executable run the DAqcarddriver and runtime engine installer automatically
I would like to include run time engine and the drivers of my daqcard(AI16XE50),( and maybe Ni daq or anything else needed?) in order to make my application portable for other computers on OS win98 and winXP .
How can I do that
thank you in advance
Olivier

Olivier,
What version of LabVIEW are you using to build your application? On a remote computer you should only need the drivers you are using and the Run-Time Engine. You can attach installers to LabVIEW 8 installers, but for previous versions you will have to add it by opening the installer configuration page, configuring your installer and then configure the Advanced properties. This will allow you to attach a EXE to the installer which you can run. Also depending on the version of LabVIEW will affect the OS version that you will be able to install the RTE on. LabVIEW 7.0 is the last version that can be installed on Windows 98.
Please let me know if you have any further questions and please include the version of LabVIEW you are using. Thanks!
Andy F.
National Instruments

To identify the user running the job at runtime

Hi All,
My requirement is to develop a program which need to send mail only if a particular user runs the job.
I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime.
Please suggest me the possible ways of identifying the user running the job at runtime.
Thanks in advance!!!
Regards,
Dinesh.

"I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime."
This is not true if your program/form/method is called inside the ABAP report which is executing in the batch job step. There, the active SY-UNAME is the user entered in SM36 as the job step user. It is not the user who planned/scheduled the job.
It is unclear from your description where your program is actually running. Is it another (ABAP) step belonging to the same job or is it actually some routine called within the same job step that you are checking or is it a program totally unrelated to the batch job in question (in that case, check out the other answers about TBTCO/TBTCP)
- Alex

Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks

Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks in advance.

I do some VJ-type work, involving playback of QuickTime files from the computer to projections, and I get good results using ProRes 422. That's convenient, because ProRes 422 is such a great editing codec, too.
Traditionally, VJs use PhotoJPEG codec, which also works well, but it's a bad editing codec. So you would have to export an edited master, then convert.
If you want it to look as good as possible, definitely schedule some time to test the footage on the wall. You may want to change the color correction of your footage to match the projectors. And if you feed the video wall some flat gray, you can see if any of the projectors need to be adjusted.
I'm not sure what application you're using for playback, but QuickTime Player 7 works well. It has an option to play fullscreen on an external monitor (View > Present Movie…).

Running the same code multiple times with different paramters automatically

Hi guys,
I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
X_Intial, X_Final, X-StepSize
Y_Intial, Y_Final, Y-StepSize
Thanks,
Dushyant

All you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
Attachments:
Cluster Array.JPG ‏9 KB

Running the net or sc commands with the rights of the local System

Hi
In Windows 7 SP1, how do I run the net or sc commands with the rights of the local System?
Thanks
Bye
Balubeto

Hi,
I agree with
T. Kujala , it's easy to achieve this goal with PsExec.exe, the tool is easy to download and use.
http://blogs.technet.com/b/askds/archive/2008/10/22/getting-a-cmd-prompt-as-system-in-windows-vista-and-windows-server-2008.aspx
If you don't want to use external utilities, then this link below might give you some hints
http://blogs.msdn.com/b/adioltean/archive/2004/11/27/271063.aspx
Yolanda Zhu
TechNet Community Support

Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

The tech specs for Phtoshop CC and Lightroom indicate Windows 7 with SP 1 is required as a minimum, so XP would not be sufficient to run them. Here's the Photoshop specs:
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor (2GHz or faster)
Windows 7 with Service Pack 1, Windows 8, or Windows 8.1*
1GB of RAM
2.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with OpenGL® 2.0, 16-bit color, and 512MB of VRAM (1GB recommended)†
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.‡

I am having trouble installing acrobat, when I run the programme it comes up with a script error

I am having trouble installing acrobat when I run the file, it comes up with a script error

Hi Pat
Thanks for your email. I was able to download and install this morning without any problems. I uninstalled the old version yesterday and restarted my computer but still got errors. However when I turned off last night, windows ran updates and that must of fixed the problem. I also got rid of firefox and put of google chrome. All to use Australia Posts click and send which wouldn't work because of an error with the plugin. Thanks for your very quick reply, I appreciate your help. Have a great day. Best Regards Judy (moo2u2)

Is any one running the 2011 mac book pro with 16gb

Is anyone running the new Mac Book Pro with 16GB? I am going to purchase the new Mac Book Pro and there are now 8gb memory boards on the market so it becomes feasible to have the Mac Book Pro at 16gb (2x8gb).

might be better off (this is about a macbook pro?)
http://www.apple.com/support/macbookpro which has lnk to fora
For memory upgrades to get an idea:
http://www.macsales.com/memorymacbookpro
Yes, some, some CS5 wigs and you will find a link to "Articles" and MBP upgrades and CS5 on your laptop:
http://www.macperformanceguide.com

Run the monitor on an iMac with a dead logic board?

Can a Mac mini be used to run the monitor on an iMac with a dead logic board?

Apparently my iMac was just dirty. When the tech tried to start it today it started even though when the tech tried to start it yesterday nothing happened. So no need to fix anything.

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
Please advise what should I do to fix this.

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1, 64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB . I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes. I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes" In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

I have the latest 64-bit version of iTunes on Windows 7 Ultimate. Everything was fine until recently. Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message: "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes" I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities. Same message appears when I plug in my iPod. Any help would be greatly appreciated.

Did you try removing and reinstalling all the Apple software using these instructions:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64version.

Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.

wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that didn't get installed with the itunes setup.

Running the 6.1 Runtime Engine with 2009 Installed

Similar Messages

Maybe you are looking for