Running the info package twice in bw 3.5?

Hi all,
There is a process chain existing to load
ods 1 to ods 2 for a particular region on a different time sone
I need to load the same ods 1 to ods 2 for another region in a indian time zone.
When i look at the new procees chain i am getting
infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!.
But the existing process chain looks like
infopackage -> ods activation -> info package -> ods activation!!
which has to be the same for the new process chain too.
When i run the new process chain
infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!.
It is causing the issues it doesn gets executed after further processing!!
Thanks
Pooja

Hi Pooja
I think there is still some build problem.
In you existing process , infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!,
Just remove 3rd and 6th step. After removing these 2, you have to link as below:
start -
> infopackage 1-> ods activation for ods1 -> infopackage2 -> ods activation2 . Please also check the variants for each existing process to make sure you have added correct IP and ODS for all the processes.
Cheers
Chanda

Similar Messages

)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

Error while monitoring the Info Package

Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.

Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D

How to Schedule the info package groups?

Hi,
To scheudle the info package group is it enough to shcedule at infopackage group level or do I need to schedule each info pcakages?

Hi ,
You can execute at Group level.
Plz find teh steps for creation and sheduling of IP Group,
1. GO to Adminsitrator workbench RSA1 > Infosources
2. Create your infopackage do not select option but select data load
immediately get out of infopackage prior to going to step 3
3. Click on icon show infopackage groups
(icons are update tree, monitor, display node log, search in subtree,
legend, and show infopackage groups)
4. This will create another window. Now you can create your infopackage
groups. Right Click on folder (infopackage group)
enter long description name, go back to your infopackage and pull it
to the infopackage group
(it's a drag and drop to long description name you just created and
remember it will be on the bottom of the list most likely)
5. Click on infopackage group and its time to select which on to run
first and time your going to schedule it.
INFOPACKAGE
a. Execute package should have a check mark without it itwon't run.
b. Start Sequence (depends on which one you want to run
first for my example its) 1
c. Selection exists (is created when you pull youinfopackage to group)
d. Maintain infopackage is a pencil and will take you therefrom hereInfopackage is your name from the infopackage you pulledover
e. Data type (is created when you pull your infopackage togroup)
Check whether contents was updated without errors beforeyou start next request
(I highly recommend you check this because if will stopyour process if a infopackage fails)
f. Delay until the start of the next request (not necessaryto check)
g. Technical name
Schedule
Selection Options: Immediate (now)Date time (preselected time) if youcheck period and period valueshere it can be run eachday or specific dayAfter job
After event At operation mode
Regards
Marasa.

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Error while openign the info Package

Hi , i am getting the following short dump error while trying to open the info package. these are the Ipaks which were in use before but now getting short dump after R/3 upgrade.
Can you please help me
"MESSAGE_TYPE_X" C
"SAPLRSS1" or "LRSS1F11"
"RSM1_CHECK_FOR_DELTAUPD"
Thanks.

Hi Chris,
Please check OSS note: 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS
There are also a couple of threads here talking about the same problem.
Hope this helps...

Data deletion routine in the info package

Hi All,
I am writting an data deletion routine in the info package.
it is working fine...
but when we are transporting the info package, that routine is not getting transported.
we have tried sending ths info package through a transport connection.
but still it is not taking the routine to next system.
please let me know if any one has a solution for this.
Thanks,
Mugdha

Hi Mughda,
Collect the infopackage using transport connection, While collecting the infopackage make sure that Routines are also collected in the same request.
Else most of systems will have authorizations to create infopackages, so try to create one IP and use the routine in IP.
Hope this helps.
Rgs,
I.R.K

How to identify the info package deleted by someone in process chain?

Hi all,
I can see a couple of info packages were deleted in the production system and it was removed from the process chain too!!
how to identify who has deleted the info package in the production system:?
Thanks

Can you is there any transport available with the Infopackage deletion activity?
in SE01 you can check in production system and check if your IPAK is stored in it or not..? IF yes then you can check the user.
Also you can track is there any deletion transport has come from D to P or Q to P? Can you check whether the IPAK is available in D and Q?
Also you can check the process chain recent modified by in RSPC and check if there is any user details were captured?
OR you can also look at in transaction SLG1. Check for the logs..
Hope this helps,
Murali

Reg: Mode of the info package

Hi Experts,
As we can run an info pakage in different modes like 'INIT', 'FULL' & 'DELTA' - this mode will be given as input in i_updmode for the extractor function module. But we are unable to get that value. whenever we run, the i_updmode is coming will null value.
is there any other way to get the mode in R/3 FM, when an info package is executed.
Will it store in any DB table?
I need to get this mode value in function module, bcoz based on that i need to implement the delta concept.
Plz help me.
Thanks in advance.

Hi Madhu,
This is the forum to discuss questions and feedback for Microsoft Office client. There is not so much about Office 365 license aspect here, I would suggest you to post in the forum of
Office 365 Community, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while running the SSIS package from SQL DB to excel file - export option

hi all,
I have 4.6 million records in my sql db and i want to copy this into a excel file. for this i went to the db and rt click and export to command and started the ssis package running. but after
few minutes, it throws me an error that "error in transferring data into excel file."
Can anyone help me why this happened and the resolution ?
help is appreciated!
Copying to `excel1_Wbook` (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - excel1_Wbook" (217) failed with error code 0xC0202009 while processing input "Destination Input" (228).
The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - excel1_Wbook returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The
meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

You need to split your data and create (at least 5) worksheet targets.
For example if you have a ROW_NUMBER column you can use for instance a
Conditional Split for something like:
ROW_NUMBER % 5 == 0 for Case 1 (excel 1)
ROW_NUMBER % 5 == 1 for Case 2 (excel 2)
ROW_NUMBER % 5 == 2 for Case 3 (excel 3)
ROW_NUMBER % 5 == 3 for Case 4 (excel 4)
ROW_NUMBER % 5 == 4 for Case 5 (excel 5)

Not able to run the SSIS package in SQL Server Agent Job in SQL 2012

Hi,
I scheduled a job (SQL SERVER AGENT) which will call my SSIS package. This package will execute 5 packages in loop.
When I execute this job I am getting error as below
============================================================
Started  : 12:30:19 PM
Error  : 2014-01-23 12:30:20.37
Code  : 0xC00220EC
Source  : Execute Package Task
Description : Error 0x80070005. Failed to create an instance of empty child package.
    The Distributed Component Object Model (DCOM) configuration or the installation of SQL Server Integration Services,
    may be corrupted on your machine. End Error
Error  : 2014-01-23 12:30:20.37
Code  : 0xC00220DE
Source  : Execute Package Task
Description : Error 0x80070005 while loading package file "D:\SSIS\RetailMobileApp\Staging_Pkg\stg_Category_Master.dtsx". Access is denied.End Error
DTExec  : The package execution returned DTSER_FAILURE (1).
Started  : 12:30:19 PM
Finished : 12:30:20 PM
Elapsed  : 1.123 seconds.
The package execution failed.
The step failed.
============================================================
In the STEPS I have selected as follows:
Type : SQL Server Integration Services Package
Run as: SQL Server Agent Service Account
Package Source: File System
What config I need to check here ? This job is not able to access the package stored in the folder.
Sridhar

Thanks for your reply. I had created credentials and used this while creating the Proxy account. With the Proxy account I am able to execute the Job Successfully. Concern here is I used my NT account to create this Proxy. Suppose If I left from the
current project if some one is coming to this project later they need to change the credential with their NT account and run the JOB? Is this right way or we an create any other account in common? If so how?
Sridhar

0HR_PT_3 Load is taking too much time when i execute the Info package

Dear All,
i am working on HR Module.
i am extracting data from 0HR_PT_3 from R/3 PRD system through info package its taking long time to load data.
I have checked in RSA3 in R/3 PRD system whenever i extract "0HR_PT_3" instead of showing records its showing this error message "Infotype 2002 not read due to lack of authorization" .
could you please let me know any one have resolve this issue.
Thanks,
Venkat.
Edited by: venkatnaresh7 on Jul 12, 2011 11:49 AM

hi
I am facing same issue. did you able to fix this?

Prevent running the same program twice or more + some other..

Hi All,
I'm trying to figure out how to do the following
1) How can I prevent a user from running the same program more than once.
2)If a user try to shut down the computer while my program is running, I need to trap it down and save some data before terminating the program, how can I do it?
Can any one help me???
thanks a lot in advance!

Don't [url http://forum.java.sun.com/thread.jspa?threadID=699067]cross post.
Answers in the other post please.

Running the same VI twice

I am trying to run to same main VI twice simultaneously. I do not want the two main VIs to share information. They need to run totally independantly. I have copied the original VI and all SubVIs to a new directory, but when I load the second main VI it shares subVIs with the first main VI. How can I avoid this? I want them to run totally independantly.

I think your problem is that you're trying to open VIs with the same name. LV can only hold one VI of a given name in memory at one time, so if you want the VIs to be completely different, you will need to rename all of them.
Another option would be to make all of them reentrant. This will mean that each place you call the VI will hold a seperate copy of the VI. You should make sure this doesn't affect the way your code works (for example, if you have a functional global, it will be affected by this).
I think the easiest way would be to make an EXE and then copy it and rename it. I believe that when running in the run time engine, you get seperate execution for each EXE, but I'm not at all sure of this, so you should check it.
If this isn't so, you can try merging the first two options.
Try to take over the world!

Running the info package twice in bw 3.5?

Similar Messages

Maybe you are looking for