Running two versions of OPA/OPM suite concurrently on one PC

Hi all,
On my current project, I have a couple of rulebases in version 10.1 which have been deployed. However, a new business release/ stage in my project has started which means we are going to work in OPA 10.3 from this point on. The 'old' rulebases (10.1) will be integrated into the new environment eventually and will be maintained in 10.1 for the time being. So here's my question: would it be possible for me to run OPM 10.1 AND 10.3 next to eachother on my PC (without a virtual machine or something), so that I can view the old projects in 10.1 style and the new ones in 10.3? I don't want to simply upgrade, because the old rulebases need to be maintained in version 10.1 as well.
Thanks & regards, Els

Different versions of 10.x cannot be run side-by-side on the same machine. Need to use virtual machines if you want to use different releases of 10.x.
See the note at the end of the 'new release' announcements for recent releases:
10.3.0: New Release: Oracle Policy Automation 10.3.0
10.3.1: New Release: Oracle Policy Automation 10.3.1
"Please note that Oracle Policy Modeling v10.3.0 cannot be installed side-by-side with previous releases of Oracle Policy Modeling v10.x"

Similar Messages

Can I run two versions of the Mac operating system on one computer?

Can I designate one hard drive to run OS 10.6.8 and another to run Mountain LIon and switch between the two?
I use software that would not run on Mountain Lion and would break the bank to both upgrade and buy a new Mac.

The EFI/firmware generally prevents you from running older OSX than what was shipped with the system.
My system can do what you propose because it came with SL, and can also run ML.
A new system that was designed to run Lion or ML will need to play very special and marginal tricks to run SL.
Some systems un der the Apple refurbished list are olde enough to run SL but new enough to run ML, and come with 1-year Apple warranties.

HT1751 iTunes thinks I'm running two versions on my computer. Please help.

My old computer crashed and I just replaced it. Since the new computer I installed a newer version of itunes. Now itunes thinks I'm running two versions on my computer. Please help.

Linda MB wrote:
Now itunes thinks I'm running two versions on my computer.
Why do you think this?

How to run two versions of dreamweaver at the same time

How to run two versions of any dreamweaver at the same time?
There must be a way to do this.

east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Two versions of 1 Font showing in Acrobat, one is licensed

We have a set of fonts (Hallmarke) that we purchased quite a few years ago. We are able to postscript from In Design and then convert the postscript to PDF via Acrobat, but the Hallmarke fonts are coming over as not embedded.
When we look in the PDF conversion settings under Fonts and hit Edit, there are two versions of each of the Hallmarke fonts, one without a padlock and one with. But, when we look at Fonts under the Windows control panel it only lists one copy of each of the Hallmarke fonts.
How do we use the unlocked version to we can embed the fonts in our PDF for printing?

Hi All,
I have now pretty much solved all the issues by creating the SWF in Flash rather than Indesign. I would advise anyone looking to create an interative PDF with animation and interactivity to go with Flash from the start. While Flash is a little more involved to create the same effects as Indesign, the extra time taken will ensure a more controllable and better looking PDF in terms of text quality, scalability and so on. Plus you will not spend days trying to get video to work along side imported SWF etc in Indesign. One of the best controls in Flash is being able to set the stage.scaleMode for the document so the PDF still looks crisp when zooming, no white borders etc. So, create the .fla, export to .SWF, open the .SWF with Acrobat, modify the advanced settings to enable start on page load and save as a PDF. If you don't know Flash, I didn't a couple of days ago, watch a couple of tutorials on Youtube.. buttons, tweens, embedding video and you'll be ready. Don't be put off by ActionScript, there are really handy Code Snippets in CS6 that do all the heavy lifting for you.
Sorry Indesign!
Best,
Em

Running two versions of java, is it possible?

Hi everyone, I've got two applications, both incorporate applets, but one uses 1.3 and the other uses 1.4. Im stuck as I need to run these two programs at the same time. The reason I cant just use 1.3 is because one uses JTree's which were introduced in 1.4 (am I correct?) . SO if thats the case, is there anyway to use two versions of java on the same machine.????????????
Thank you
Graham

I've got two applications, both incorporate appletsYou have two applets.
one uses 1.3 and the other uses 1.4. One requires at least 1.4 (you think)
I need to run these two programs at the same time.
The reason I cant just use 1.3 is because one uses JTree's which were introduced in 1.4 (am I correct?) .The 1.3 API Spec includes JTree
So if thats the case, is there anyway to use two versions of java on the same machine?Why can't you just use 1.4

Running two versions of Firefox?

Some web-based applications that I use will not work properly with Firefox 3, but will work with Firefox 2. Can I have both versions of Firefox on my iMac and select between them, or will they interfere with each other? Would it help if I put one on my external hard drive and run it from there (if that is possible)?

Don H. wrote:
Some web-based applications that I use will not work properly with Firefox 3, but will work with Firefox 2. Can I have both versions of Firefox on my iMac and select between them, or will they interfere with each other?
you can have two versions of FF but you can't run them both from the same account as they will interfere with each other.
You can make a new user account and run FF3 from your main account and FF2 from the new account.
Would it help if I put one on my external hard drive and run it from there (if that is possible)?
no, that would make no difference at all.

Run two versions of Mac OS Simultaneously

I'll skip the reason, as to not confuse the issue.
I have Mavericks installed on my Air, and Lion installed on an external drive. I can boot into either one, but I would like to run them both simultaneously. Is there VM software or something similar, that will allow me to run them both at the same time and switch back and forth?

FatMac&gt;MacPro wrote:
c_ostmo wrote:
...Is there VM software or something similar, that will allow me to run them both at the same time and switch back and forth?
Within the limits of Apple's End User Licenses, VMware Fusion will run everything from Snow Leopard (Server) to Yosemite.
Exactly what I am doing right now. I have VMware running two OS plus the host. Mac OS X *forbidden name* as the host, Mac OS X Mavericks and Windows 7 as VMware. I can tell you this, when you install the Mac OS X on the VMware, it will have a 4:3 resolution. In order to fix that, you'll have to manually install VMware Tools. For Windows VMware machines, it's installed automatically.
However, I do agree with the other two on battery life and RAM space needed. I can't tell you where the cut off point is, because I am on a Mac Mini with 16Gb of ram. So I haven't ran out... Only lost power but so did my whole neighborhood. If that was caused by the Mac Mini... I'm in trouble. lol
KOT

Can I install and run TWO versions of iTunes in Win7?

Please, definitive answers only (as far as possible), and read the question properly before replying - it save creating a useless and confusing thread!!!
My problem: New iTunes is awful, I like using 'CoverFlow) for navigation. Omitting it from the newer version is a mistake.
How to resolve?: Can I, in a newly created (seperate Win7 folder from 'Program Files'), install an ADDITIONAL (and older) version, so that I don't have to uninstall the existing newer one?
My music resource is on an external hard-drive, so, theoretically, is available to more than one installation of iTunes variants?
I am NOT going to uninstall the new one I already have, as this is a 'normal' install which I shall upgrade accordingly.
Can I install another, to work temporarily until iTunes put back into their relseases 'CoverFlow', by simply installing it in a different location/folder, and then pointing both to the music resource.
Anyone tried this already, maybe even for the same reason as me, and got a definitive outcome if it works or not, without causing any conflicts?

DJ Monsoon wrote:
Thanks. Yes, I am familiar with dual-booting systems. I often do this at work. But, again, not really answering my question:
Can I install 2 (different) versions of iTunes, on Win7 (just the one OS, or I would have said otherwise), if I install them into different folders.
I ask as I've never tried it, and don't particularly know all about iTunes.
To be honest, I'll just give up with this as a forum, as this is the 2nd time I've made a plain question as straight foward as a possibly can, to get an answer to a different one.
I give up, if people just can't read properly, then answer the question , preferring instead to give me an opinion.
With deep appreciation of you using that forum, I will bow down deeply concerned with my incompliance with your preferences. I am very sorry that instead of answering said question I provided you with solution. I solemnly swear that I will never do it again. I thank you for giving me a credit nevertheless for helpful answer.

Running two stepper motors at the same time from one port

Hello,
I have to run two motors at the same time - one used to move a linear ball screw and one to turn a grip. I am doing tension and torsion testing on small wires, but tension and torsion have to be done at the same time. I also have to build in the ability for each motor to take multiple steps, ie. have a motor take x number steps at y velocity and then move x number of steps at z velocity. Both motors need to be able to do this. However, I am having problems getting the motors to run at the same time and to take all the steps. The motors are connected to two RMS Technologies R356 controllers. Both of the controllers are then connected to one RS485 to USB converter card, and that card is connected to one of the USB ports in the computer. Currently, I pass an array of commands to two for loops each containing VISA read and writes. I've attached the vi to look at. All of the timing stuff in the code is because a new command cannot be sent to the controller before the motor is done executing the previous command. If commands are sent right after one another, the controller will only execute the first command and then return with an error.
Does anyone have a suggestion as to what I am doing wrong?
Thanks in advance for any help.
Solved!
Go to Solution.
Attachments:
Motor Controller (Sub VI 3).vi ‏41 KB

I'm not too clear on exactly what you are trying to accomplish or some of the details.
Are there equal number of torsion and tension steps?
Is there a pairing between a torsion and tension? For example, you want to tension and torsion simultaneously, but those two together make a complete step?
Do you want to wait until both the torsion and tension have completed before moving on to the next torsion/tension pair?
Is there any time delay you want to hold at before moving on to the next step.
When working with state machines, it is important not only to define the states, but also the logical stepping from one state to the next, or alternatives based on conditions. It could be flowchard, but sometimes people call them state charts.
Right now your latest posting has goes to "Write to Motor" event though and will wait there forever because there is nothing in the queue to write out through the VISA port.
Let's assume your first state would happen to be Enqueue Tension (in order to get something in the queue), you will actually queue up all your tension commands at once with the For loop. Then i will be 1 less than the size of the array it always will be because for an array size n, i will go from 0 to n-1 on each iteration. So your false case will run and you will go to "Write to Motor". Write to Motor will run and dequeue the first command then go to Waiting for Response. Waiting for response will iterate through the while loop until 66 or 67 comes back. I assume only 66 will come back for tension since you have yet to write a torsion command. Once that comes back, it will go to Enqueue Tension again and insert a whole other series of commands. Then go back to write Motor and will take out the 2nd queue element from the first set of commands your wrote. It will stay in a Tension mode and the Queue will grow endlessly putting in a whole new series for each element that you dequeue.
A state machine is the way to go, but I can't really sketch one out for you because I'm not sure exactly how your applications is supposed to work. If a tension and torsion command are paired together, perhaps you should just queue them together and write them out at once. But the key thing is to sketch out on paper your application and flowchart exactly how the program should progress from step to step.
PS: One other thing, make sure you wire the queue reference wire through all states.

I seem to be running two versions of firefox at the same time help!

I seem to be running an older version and a new version of firefox at the same time. I run the new version from startup (it forgets previous tabs from last session) and this sadly does not let me use back and forward arrow buttons so its a bit useless. Strangely when I pop an email window up, the older version of firefox appears with the last few tabs I had browsed.
disabling plugins stops browser starting in new version and back and forward arrows work ok.
any help much appreciated!

You can install them both but there are a few steps to take.
When you install Firefox 4 use the custom installation option and choose a different location to install Firefox.
In order to use both versions, you need to create a new profile for Firefox 4 (Firefox stores user data in the profile). Using the same profile with different versions can cause problems. Once you create a new profile you can copy certain data such as bookmarks and passwords between them. You can also use Firefox Sync to keep the profiles synchronized. Finally, you will need to set up shortcuts to launch the correct profile for each version.
The following links show how to do this:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
* https://addons.mozilla.org/firefox/addon/firefox-sync (only needed for Firefox 3.6, it is built into Firefox 4)

Is it possible to run two versions of fcpx ?

Hi there,
I am running fcpx ver 10.08 and my OS is Mountain Lion 10.8.5.
After upgrsding to Maverick, can I run both fcpx 10.0.8 the 10.1 ? If I can, then I do not need to update/convert the existing projects and events library to the new structure ...
Thanks

Hi there, I saw some youtube video, it says that after we update, FCPX will ask:
"Do you want to move the old projects and events to the trash ?
If you no longer need the old versions of your updated projects and events, click Move to Trash, To save them, click Save"
So, the question are:
1) if we click Save, our old Events folder and Projects folder will be saved in another folder ?
2) if we click save, will this cause our disk drive to be doubled ?
3) does this mean this is another chance to copy/backup the old Events folder and Projects folder ?
4) after clicking Save, where will the files be saved ?
5) after clicking Save, will the files in the Events folder and Projects folder be in hte form of old/exisiting structure or new structure ?
Thanks

Running two versions of Safari

The 1.3.2 version of Safari that I'm running on OS X (10.4.9) is not compatible with the Blackboard classroom application that I need to access for a conference next week. The Blackboard website offers no solution. Is it possible to download an older Safari version while keeping the newer version? If yes, how do I download an older version, where do I find it, and where should both versions be stored? If no, what might be the issues involved in replacing a newer version with an older version?
G5 Dual Mac OS X (10.4.9)
G5 Dual Mac OS X (10.4.9)

I access Blackboard fairly regularly with no issues, and I use Safari. What version does it say you need? Currently, I am using the Safari Beta with no problem. But before that I used Safari version 2. Does your version of Safari have a debug menu? If so you could try using the user agent, and selecting the browser the site calls for under that. Strange your running the latest version of OSX, but an old version of Safari. You could also download a free application called Tinker tool and enable the debug menu if it is not there.
Thanks for the advice, Hawaiian_Starman. The
Blackboard site is very specific about which versions
of Safari or Firefox it supports. Some of the oldest
versions are unsupported, but so, too, are some of
the newest. I will study the links you included, and
I will try the install DVD tomorrow. I'll let you
know how it all works.
Again, many thanks for the ideas.
G5 Dual Mac OS X (10.4.9)

Run two versions of Flash?

I have one program that will only work with Flash 8. All my
other programs want Flash 9. Is there a way to run both Flash
8&9 at the same time?

check alessandro crugnolo's flash switcher for
firefox.

Running two versions of iLife and keeping iMovie 6

Actually two questions.
Is it possible to keep iLife 08 and also install Life 09 in the same computer.
And MOST importantly if I install the iLife09 package will I loose iMovie 06 which I have used so much and have so much material I am working on?

iMovie 06 won't be deleted but iLife 08 will. You could copy them to a separate hard drive and copy them back after 09 installation. But iLife09 will upgrade iPhoto library and iMovie project files, so chances are iLife08 won't work correctly.

Running two versions of OPA/OPM suite concurrently on one PC

Similar Messages

Maybe you are looking for