Running VB6 SP5, CW 3.0(536), NI-DAQ V6.7, PCI-6023E. Placed a CWCounter component on my form, setup parameters and c

alled CWCounter1.Configure which returned a success. Called CWCounter1.Start and got the following error: Run-time error '10123': Start DAQ operation Invalid paramID used. There is no param specified for this method in the doc. Any suggestions? Thanx.NI-DAQ 10123 is the generic error for an invalid parameter in counter configuration. Our counters can be used for many things (pulse and period measurement, edge seperation, event counting, etc.) and require different configuration settings. Without seeing the properties you chose and without knowing your specific application, I would recommend starting your development process with our wonderful counter examples that ship with CW. Pick the closest sample to your application and modify as needed. They are usually available in the MeasurementStudio\VB\Samples\DAQ\Counter directory. They should run with the default settings.
good luck
ben schulte
national instruments

Similar Messages

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.

I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results!

I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
I need to keep Snow Leopard so that I can run some old softward.

If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
CCC can clone Lion Recovery - great for moving or backup.

"I am constantly getting a message which says Itunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?

I am constantly getting a message which says "iTunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?

HI daddio,
Ok some things first I need to know...Did you use Microsoft cleanup utility to clean up all those uninstalls you have done?
I hate Norton and anyone who reads my posts will know that. I have seen way too many infected PC's by Norton users. Did you try the EWIDO and AdAware scan? I see you said you read lots of posts. That is helping folks remove the malware in order to get iTunes and quicktime back to health.

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
I followed the FAQ troubleshooting and that didn't help

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media Pending screen. What the? Have to cut this stuff soon! Wont even import into Media Encoder. Says there are no usable streams in the media! Just saw a podcast title about stress in the editing business. Better listen to the one! Any help would be most appreciated. J.

Copy ALL contents of SD card to a folder on edit hard drive. not just video clips, everything. Then in Premiere, import using Media Browser (tab at lower left of Premiere screen). This usually does the trick. There is metadata contained in the SD card files that is needed, not just the video clips alone.
Thanks
Jeff Pulera
Safe Harbor Computers

I can't see the epma component in workspace even its up and running also ca

i can't see the epma component in workspace even its up and running also can't see the planning applications in workspace even i log in as admin

Has it ever worked, anyway try running the config utility again and configure the foundation web server
Cheers
John
http://john-goodwin.blogspot.com/

"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'name'. Make sure it exists and that its name is spelled correctly.

When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End Function

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

BDAqua wrote:
....but some other new Macs will boot frome a clone of 10.6.8...
Only with a whole lot of effort and instability. As the new Minis have
hardware (HD4000, USB 3.0, etc.) that is totally unsupported in old OSes.
The only option would be to see if it would work by installing in a virtual machine
running 10.6.8. I'm sure there will be some performance hit but whether it would
be enough to be unusable is the question.

I deactivated Photoshop CC on my Mac Mini and downloaded PS CC on my MacBook 1.1. I didn't realize the program will not run on MB 1.1. I uninstalled the app on the MacBook. I tried to reactivate on my Mac Mini and it tells me I already have the program lo

I deactivated Photoshop CC on my Mac Mini and downloaded PS CC on my MacBook 1.1. I didn't realize the program will not run on MB 1.1. I uninstalled the app on the MacBook. I tried to reactivate on my Mac Mini and it tells me I already have the program loaded on two computers. How do I solve the problem?

The activation server shows that it is now activated on two computer, it has been deactivated once .
When you install it on the third computer or for the third time & when you to activate it, if it installed & activated already twice, there will be an option of deactivating it from the previous computers, please click on that.(To deactivate from preinstalled machine, Open any Adobe CC application > Help Menu > Signout.)
Next it will allow you to activate on your new machine,
Now you can go back to your first computer, log out & log back in of Desktopp CC App, launch any product, if there is any product to buy, in that prompt there will be an option to " license the software", please click on that & sign in.
It will reactivate the CC on the first machine.
You have already deactivated it from one machine, hence you can activate it on third computer.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html#deactivate-problem
In case the is still not resolved, please contact Adobe at
http://adobe.ly/yxj0t6
Please refer to:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
I'm a Creative Cloud member, why is my app launching as a trial? Mac OS 10.7.4
creative cloud software says my free trial has expired, but I have a paid subscription
Re: Creative Cloud for Teams - second computer will only install as trial version
Creative Cloud Help | Install, update, or uninstall apps
Hope it helps.
Regards

I am running InDesign CC. Every time I try to redefine a paragraph style, it crashes. It's just start doing it and I have had CC for a few months. Any suggestions? Thank you

I am running InDesign CC. Every time I try to redefine a paragraph style, it crashes. It's just start doing it and I have had CC for a few months. Any suggestions? Thank you

Do you mean Toolkit or TypeKit, which is part of CC? See Remove minor corruption by exporting. If that doesn't work, try exporting the text to ID Tagged Text and place in a new file, and if that also fails, try removing the fonts.

Task sequences won't run after "Setup Windows and ConfigMgr"

In my Task Sequence for SCCM 2012 R2, no task sequences that occur after the "Setup Windows and Configuration Manager" step will run if I add to the Installation properties:
PATCH="\\server.domain.com\D$\SMSPKGSIG\PHX00033.2\configmgr2012ac-r2-kb2905002-x64.msp"
I believe this hotfix is necessary because I had to install on the server to fix the speed of downloading the WIM file. And I believe it says I need to append this PATH= switch to the install.
Is my path used incorrectly or something? Because that is the actual path to the file.
My task sequences will run fine if I remove it and just leave the SMSMP=server.domain.com in the install properties.

Your path would then be :
PATCH="C:\_SMSTaskSequence\OSD\JJJ00033.2\configmgr2012ac-r2-kb2905002-x64.msp"
I suggest that you plan for further patches. Create a directory with all your future hotfix in it.
Ex: D:\SCCMHotFixes\KBNumber\x64
Your "Patch" parameter will grow over time, when a new hotfix will be release, you'll need
to add it after this one and so on...
I always use the _SMSTSDataPath without any problem, you could also try this.
PATCH=""%_SMSTSMDataPath%\OSD\JJJ00033.2\configmgr2012ac-r2-kb2905002-x64.msp"
Benoit Lecours | Blog: System Center Dudes

HT1222 apple boosted of 200 improvements/changes to ios 6. I have yet to find more than 15. does anyone know where these can be found? I hate not running an os I don't want, but after hearing about ios 7, I think 6 is the lesser of 2 evils and installed i

apple boosted of 200 improvements/changes to ios 6. I have yet to find more than 15. does anyone know where these can be found? I hate not running an os I don't want, but after hearing about ios 7, I think 6 is the lesser of 2 evils and installed it.

FelipeV wrote:
Nahhh...too modern; too many features....
Yeah - it does have all those pesky holes to stick your fingers in.
Maybe this?

Running VB6 SP5, CW 3.0(536), NI-DAQ V6.7, PCI-6023E. Placed a CWCounter component on my form, setup parameters and c

Similar Messages

Maybe you are looking for