Running vCenter as a VM using a vDistributed Switch

Anyone have any input, experience or thoughts regarding running vCenter as a VM, on UCS/vSphere 5, where the vCenter instance is used as the integration point for UCSM, and the VM on which vCenter is running is connected to the vDistributed Switch (h/w VN-link) that UCSM and vCenter is managing??
It sounds risky, but is it plausible? Do I need to use a regular vSwitch for connectivity if I want to virtualize vCenter? We presently run vCenter as a standalone host outside of the virtual environment it is managing.

       OK,When I get the M81KR adapter,I replace M71KR to M81KR or install both adapter in blade?
                                                                                                                            Thanks, Jeremy!
                                                                                                                              Best wishes

Similar Messages

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

To run a program in BACKGROUND using SUBMIT

I need to run a program in background using the SUBMIT option. Here i have to pass an internal table form one program to another which will be used to update sales orders using BDC.
Questions
1} Can we execute a program in background using SUBMIT?
2} I am sending data to a MEMORY ID , if i run the program in background will the memory id work. As in do memory IDs work in the background.
Thanks in Advance

refer same thread.
Re: Problem with SUBMIT in Background

To run OHS at port 80 using solaris role based access control

Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
Ken

Just to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM

After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?

After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?

Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

I have a Mac running OS 10.5.8. I downloaded Firefox 4 and not the program will not open at all. I am also unable to download the previous version that was running fine. I'm using Safari to contact you.

I have a Mac G5 running OS 10.5.8. I downloaded Firefox 4 and now the program will not open at all. I get an error message that reads --
"You cannot open the application 'Firefox" because it is not supported on this architecture."
I am also unable to find a link to download the previous version (3.6) that was running fine. (I'm using Safari to contact you.)

Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
My solution; very simply use timemachine to restore the previous Frefox 3.x
worked great in 3 mns

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.

Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.
How do I reach tech support?

http://forums.adobe.com/message/5506764#5506764

Issue Running a Dashboard on iPad using Oracle BI Mobile App 11.1.1.5

Hi All,
I have an Oracle BI dashboard (11g) which I'm trying to access through an iPad. I have Oracle Business Intelligence Mobile App (version 11.1.1.5) installed on the iPad and the version of the Oracle BI EE Server is 11.1.1.6.0
Functionality of the Dashboard
=============================
The dashboard consists of 15 tabs. The first tab is an Overview tab from where a user is required to select the value for a scenario. Once the user selects a particular scenario and clicks on Apply button the charts on the Overview tab, as well as the data for all other tabs gets generated and the user can select different tabs and view their data.
Results Obtained (till now)
================
The above Dashboard is working perfectly fine when tested on
i. Internet Explorer
ii. Apple iPhone & iPad - Safari Browser
ii iPhone - Oracle Business Intelligence Mobile App
Problem Running the Dashboard on iPad ( using Oracle Business Intelligence Mobile App)
============================================================
When I open the Dashobard, the initial Overview tab appears. As soon as I select a Scenario and click on Apply button, the Overview tab gets generated perfectly fine but the drop down list for selecting the other related reports (tabs) stops appearing.
The Refresh, Properties, Mobile/ Original Layout and Favorites icon on iPad screen all stop functioning.
However, if I do not select a Scenario in the Overview tab and simply click on the dropdown I'm able to view and select from the list of other available reports (tabs) in the Dashboard. The other tabs open up but do not display any components which completely or partially depend on the scenario chosen on the Overview page. Only the components which are independent of Scenario selection appear on the other tabs.
Selecting the Scenario in the Overview tab and applying it is a mandate for getting results on other reports (tabs) but once this is done then the complete navigation stops as explained above.
The same Dashboard is however working perfectly fine with the same App on iPhone.
If anyone has any idea about how to resolve this issue, Please help.
Thanks,
Jyoti

There are a number of issues w the Mobile app and Ipad...have to thoroughly reviewed this metalink note:
Master Note For Oracle Business Intelligence Mobile Applications (iPhone/iPad) Issues in OBIEE [ID 1293391.1]
If helpful, pls mark correct or helpful

How to run 2 different Firefox versions using the same profile

Is it possible to run 2 different Firefox versions using the same profile and still have browsing history saved? I used to be able to do that up until a week ago. What happened was I was using Firefox version 3.6.28(a very old version of Firefox) which I need to use sometimes and then the current version, 36.01. Earlier I would use both my versions of Firefox and the history would be saved if I used both versions but now when version 36.01 came out, its not saving for some reason. Is this a bug? The history is saving during the current session, but say I close out of Firefox and then go back to Firefox, it will still be saved but when I go to my old version of Firefox, the history is saved but then after I close out of that the history on my new current version is all gone and it starts me all fresh, is there a way to get rid of this so that the history will always be saved even if i switch between versions? I could do that before up until Firefox 35.01 but Firefox 36 isnt saving the history from the old version, is this a bug or not? Now I have to create a separate profile for each Firefox so the history I use on the old version is only saved on that version and the history I have on the new Firefox is another profile so that history from the 2nd profile remains but I dont want that. I want to be able to use the same profile so that the same browsing history can be saved using both versions like it was before, I hope people can understand my problem. If not I can further explain, thanks.

@ the-edmeister, I understand that the 2 versions are completely different, however how come the history was saving fine when I switched between firefox 3.6.28 to the current one which was Firefox 32, 33, 34, 35 etc? Like I'm surprised how come now at Firefox 36 this problem started, Firefox 36 isnt that much different from Firefox 35 but yet Firefox 35 was still saving my browser history from the old 3.6.28 version, my 3.6.28 version never upgrades but the new Firefox keeps upgrading whenever there is a new release out automatically and then all of a sudden when the new version of 36.01 came out all my history was gone, so isnt Firefox 35.01 also very much different from 3.6.28 as much as 36.01 is? I hope you got what I meant, thank you for helping.

Why does the terms for logic say we cant run these programs for commercial use

question i have regarding the terms for garage band and logic terms where is says just under section 2 it says ((i) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple
Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you
own or control; and)
im not sure if it means i cant use garage band or logic to produce music for clients for commercial use ?
check it out here
http://images.apple.com/legal/sla/docs/LogicPro.pdf
http://images.apple.com/legal/sla/docs/GarageBand.pdf

Section C/2/A/(ii) of the Logic Pro document says:
if you are a commercial enterprise or educational institution, to download, install, use and run
one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac Computer that you own or control.
and section C/2/B says:
The Apple Software may contain sample content including but not limited to artwork, audio files, audio loops, built-in sound files, graphics, images, impulse responses, photographs, samples, sound sets, sound settings, video files, or similar assets (“Sample Content”). This Sample Content is proprietary to Apple and/or its licensors, and is protected by applicable intellectual property and other laws, including but not limited to copyright. Except as otherwise provided, all Sample Content included in the Apple Software may be used on a royalty-free basis to create your own original soundtracks for your film, video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Sample Content, however, individual Sample Content assets may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, clipart, music beds, sound effects, sound files, sound libraries, stock animation, or similar assets.
(my emphasis).
All this would seem to cover you for the use you propose (this is not a legal opinion). GarageBand is presumably similar.

Is it possible to run Tiger in Snow Leopard using Parallels?

Hey All,
Anyone know if it is possible to run Tiger in Snow Leopard using Parallels?
I am using SPSS 16 and it is not compatible with snow leopard. A temporary fix right now if I partitioned my hard drive and installed Leopard on some extra space to run SPSS. This is kind of annoying because I only need Leopard to use SPSS. I would rather emulate it so I can listen to iTunes and check my email in SL.
What about Panther? I think I even have a copy of Panther to install in Parallels?
I read somewhere that the EULA restricts OS X from being emulated, which seems odd for Mac users who need to test or use old software. I understand though about emulating OS X on windows machine though. I guess they need to blow off the whole foot than just cut off one toe.
Thanks for the thoughts!

From what I can tell, doing this would be, at best, of dubious legality.
Even so, the popular opinion seems to be that it would take some degree of hacking to pull off a virtual machine running OS X. I think that unless you are willing and able to undertake such a task, your best bet is to stick with a partition running an old version or wait for SPSS to be updated for Snow Leopard.
Although...... I have Parallels 4 (current version is 5) and it has an option, when setting up a new Virtual Machine, to install Mac OS X server (see image linked below). Perhaps if you could get a copy of the server edition of the OS you would have more success?
http://img52.imageshack.us/img52/1600/screenshot20100216at110.png
Message was edited by: Iynque

How to run the oracle application cleint using static ip or domain please e

How to run the oracle application cleint using static ip or domain please explain me.
i am not able to run oracle forms in client machine how to run it please explain me
Please give me detail regarding that
any body please help me.
my mail id::::: [email protected]

You did not mention exactly which Forms version you are using so it will be difficult to offer specific help. However, you did mention Forms 9i. ALL "9i" releases were desupported long ago, so find software or documentation are becoming more difficult.
Here is the Deployment Guide for Forms 10.1.2
http://download.oracle.com/docs/cd/B19375_07/doc/frs/forms/B14032_03/toc.htm
Here are some technical reference for Forms 9.0.x
http://www.oracle.com/technology/products/forms/techlisting9i.html

How to Run scenario from the web using HTTP web page?

Hi guys
Please let me know How to Run scenario from the web using HTTP web page?
Regards
Janakiram

Hi Janakiram,
ODI provides web based UI for running the scenarios using Metadata Navigator (read only of ur ODI components) and Lighweight designer (u can edit the mapping here).
Please explore how to install metadata navigator in ODI and have a look at ODI Setup document for more information.
Thanks,
Guru

UNIX: problem running an DEV & QA environment using form/report servlets

UNIX: problem running an DEV & QA environment using form/report servlets
I am trying to setup on one server an DEV and QA environment using the Forms Servlet, Forms Listener Servlet and Report Servlet.
I think I have the Forms Servlet and Forms Listener Servlet running properly. The problem is setting up the DEV and QA environment for running reports.
For example, when in DEV environment I would like to run a report from a directory specified in the REPORTS60_PATH. This doesn't seem possible.
It might be easier if I describe my configuration first:
DEV: run all forms and reports from the directory /data/release/dev
QA: run all forms and reports from the directory /data/release/qa
---DEV & QA Settings Forms Listener Servlet:
zone.properties:
# DEV
servlet.fl60dev.code=oracle.forms.servlet.ListenerServlet
servlet.fl60dev.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev.env
# QA
servlet.fl60qa.code=oracle.forms.servlet.ListenerServlet
servlet.fl60qa.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/qa.env
---DEV & QA Settings Forms Servlet:
servlet.f60servlet.code=oracle.forms.servlet.FormsServlet
--- Settings for Reports Servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
Custom Env files since we are using Developer 6i Patch 7
dev.env and qa.env
Here I specify FORMS60_PATH and REPORTS60_PATH,
eg: DEV -> FORMS60_PATH=/data/release/dev
REPORTS60_PATH=/data/release/dev
likewise for QA ../qa
In the formsweb.cfg file i have something like:
[dev]
serverURL=/servlet/fl60dev
form=test.fmx
[qa]
serverURL=/servlet/fl60dev
form=test2.fmx
I have tested the following and they work without problems:
1. forms listener test page, eg: http://webserver:7777/servlet/fl60dev
2. running forms from the 2 environments
eg: http://webserver:7777/servlet/f60servlet?config=dev
this runs the form in the FORMS60_PATH (/data/release/dev)
Now my problems start with Reports.
When I run a report from forms (using run_report_object) it will not run any reports
as specified in the REPORTS60_PATH
Even using this url:
http://webserver:7777/servlet/RWServlet?server=rep60&report=test.rdf&destype=cache&desformat=html&
userid=scott/tiger@test9i
It NEVER seems to pickup and use the REPORTS60_PATH. I have tried nearly everything.
I have gone throught the instructions in "Integrating Oracle9iAS Reports in Oracle9iAS Forms -
White Paper"
(http://otn.oracle.com/products/forms/pdf/277282.pdf)
and Forms6i Patch 7: Oracle Forms Listner Servlet for Deployment of FOrms on the Internet
(http://otn.oracle.com/products/forms/pdf/p7listenerservlet.pdf)
plus any other documents in metalink relating to forms, or report servlets. I am
totally confused, please help.
I have tried setting the REPORTS60_PATH in the following files without success:
custom.env (as specified by initArgs=EnvFile in zone.properties)
jserv.properties
in the zone.properties I have tried to set a custom env file for the report servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
servlet.RWServlet.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev_rep.env
NO LUCK.
The only place that I can set the REPORTS60_PATH
is in "[6iserver home]/reports60_server" file when I start the reports server (did I even
get this right - I do have to have a reports server running don't I?)
Does this meaan I have to run multiple report servers for each of my environments?
Based on all the documentation I thought that REPORTS60_PATH as specified in the files relating
to the forms servlet would be the place to specify the path.
As you will understand I am getting really fustrated with this and it seems to
me that the reports servlet configuration in 6i is really half baked and since 9i
is coming out it will never be fixed.

I am even not able to run forms servlets from two different forms60_path, Is there any configuration do you make other than what you have mentioned in this post.
I already open a TAR in this regard, I am still waiting reply from ORACLE.
Thanks,
Shaik Ather Ahmed

Running vCenter as a VM using a vDistributed Switch

Similar Messages

Maybe you are looking for