Running Vista
I installed Flex Builder 2.01 successfully in Vista.
When I went to run a simple mxml file I got a message telling
me "There is no disk in the drive. Please insert a disk in the
drive".
I can run it from the html file however.
Has anyone else run into this and, if so, know how to fix it.
I checked all my settings and they seem to be correct.
Many thanks in advance,
Charles
As an update, the problem seems to be in locating the
browser. When I go into Windows > Preferences >
General....Browser...I get the same message. It is looking, for
some reason, for the browser in a different drive.
Is there any other way of changing the default browser other
than Windows > Preferences?
Many thanks
Similar Messages
-
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark -
Save and quit feature not working on FF4. Always worked in Firefox 3.6.Running Vista home premium
When I close firefox 4 the option to save the open tabs is not offered. Only choice is to cancel or close tabs. Running vista home premium. Only extensions are adblocl plus and image zoom
You can use "Firefox > History > Restore Previous Session" to get back the previous session.<br />
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Can Time Capsule be set up to backup a PC running Vista....with no Mac?
I'm trying to help a friend, a woman in her 70's who knows nothing about computers other than using her genealogy program. She needs a backup disk to make sure she doesn't lose her thousands of genealogy entries if her PC's hard drive crashes.
Her niece gave her a 500 GB Time Capsule, and said the guy in the Apple Store said it would work with a PC. But don't you need at least one Mac to set up Time Capsule? I guess I could bring my MacBook Pro over if you do need one for setup....but how would she do her backups to her PC running Vista? Anyone know? I know nothing about PC's.
I guess if it is possible to set up, she would be using the Time Machine strictly as a wireless router/hard drive.....since she would obviously not be able to use "Time Capsule".....since that is part of OSX. Is this correct? Would she need a 3rd party backup program that is Vista compatible....or does Vista have a built-in backup program she could use. I think her genealogy program will automatically save to a backup disk when you close the program......do you think her genealogy program could be set up to point to the Time Capsule and save the backup wirelessly when she closes her program?
Any help would be greatly appreciated.
Thank you.
Message was edited by: Randall Olson1
Message was edited by: Randall Olson11. Time Capsule comes with an AirPort Utility for Windows, so you don't have to use your MBP to set it up. If she doesn't have the disk you can find it from Downloads on www.apple.com
2. You cannot use the included backup program for Vista, as the security settings somehow don't work with Time Capsule. XP's backup program does work fine with Time Capsule, but Vista is a no go. You will either need to install a 3rd party backup program (I don't have any to recommend, sorry) or just manually copy her files to the Time Capsule (you must enable file sharing in AirPort Utility to do this).
3. I have no idea about genealogy programs, you will have to run the program and see if there is an option to save to a network hard drive when exiting. -
I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
I have an old PC running Vista. On that machine, in iTunes, I copied ALL my CD's. I now have a new machine running windows 8.1. I would like to transfer that music on to the new machine in iTunes. Please help.
Read through these:
iTunes 11 for Windows: Move your library to another computer
iTunes: How to move your music to a new computer - Apple Support -
No Audio - External Speakers - Running VISTA x64 Ultimate
I have seen numerous references to this problem in the forum archives... but no solutions yet.
I run Vista x64 Ultimate natively on the Mac Pro - no VMware or other emulation software.
Everything works great EXCEPT audio: I have searched and searched and need an expert.
All OSX, Firmware, and Bootcamp drivers are up to date.
Realtek Audio doesn't not recognize the rear external audio port. I plugged in / out / in etc., nothing. All audio comes from the internal tower speaker.
My speakers use the standard analog jack, they are new Bose MusicMonitor speakers.
Things I have done:
Vista Audio Settings - all ok, all set to max, double checked - nothing.
New Realtek Audio Drivers - tried installing newer version - nothing.
Reinstalled Bootcamp Drivers - nothing.
Reinstalled Bootcamp Drivers (original disk) + Bootcamp Vista Drivers (new release) - nothing.
BTW - the speakers work just great under OSX - they produce awesome sound - so it's not a hardware issue.
Thanks - I hoping someone has discovered a solution!P.S. I have the X-Fi Platinum.
I left that out in my original post. -
I have a computer running windows vista that I pay per month for photoshop, I want to use photoshop on two other computers I have, not that it matters but they are both identical hardware wise, and software one runs xp and the other runs vista, I can upgrade but I am not intrested in other os. When I attempt to download I am told that my os is no longer supported. Now i know that I could find an offline version and should be able to get it installed but im not sure of a safe site that provides the iso or install exe. I want to use the other two computers because they have touch interface early computer/tablet highbird. thanks in advance.
Michaelt65951582 I am sorry but you will need to run at least the minimum operating system to use Photoshop. You can find the system requirements at System requirements | Photoshop. I would recommend upgrading to Windows 7 or later. You may find that your computer can support the more recent operating system depending upon the hardware installed.
-
Hello all,
my Laptop (Dell Vostro - running XP SP3) neither recognizes my iPad 2 nor my iPhone 4!
Both devices are working correctly with my desktop PC running Vista with the same USB cable!
I followed trouble shooting guides, checked that the drivers are present, installed, removed and reinstalled the latest iTunes (in the correct order together with the other Apple software components) etc. but nothing works! The interesting thing is that when I plug the iPad or the iPhone in the laptop's usb-port for a second Windows correctly shows the devices either as iPad or iPhone in the "Device Manager" with an exclamation point !!! But then after a split second Windows allways switches the devices to Digital Camera and the correct iPad or iPhone disappears !!! => That is why I guess that this is a driver problem!
Does anybody have any idea what else I can try?
Is there a manual way to install the drivers for the iPad 2 or iPhone 4?
Many thanks for your ideas and suggestions
EdgarYes I know that (I always google first and ask later ). Too bad I find this out when it was too late. I was already on 4.3.
-
I have a laptop an hp dv6700, running vista the dvd drive is missing how do i get it back?
Greetings this is my problem?
I have a beautiful HP Laptop the dv6700 Series, running Vista, on this Computer i have a DVD Player, with my media center, and the drive.
Now the drive is missing, and now I can not burn anymore DVD's, or play any of them either can anyone help me find a solution to this issue please?
This question was solved.
View Solution.Okay, let's check the following:
>> Do you see the DVD drive listed in "Computer" explorer? double click on it to open.
>> Do you see the DVD drive listed in the device manager??
(Click Start and type "device" in the search field, then select Device Manager >> check for CD/DVD drive listing.)
>> Is the DVD drive listed in the BIOS?
(Restart Your PC and start tapping F10 key, once you are in setup screen go to boot options, check for the listed devices)
also please download and run this program:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-|| -
I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes
Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
I have a C6380, The printer works with my laptop running Vista and MacBook but not Windows 7. Why??
I have had my C6380 for quite a while, now. I have a personal laptop running Vista and have no problems. I have a MacBook for work that I use with the printer with no problems. I also have a desktop that was working well for a long time with this printer and for the last number of months (I haven't counted), I have been having a lot of problems.
Either the computer cannot find the driver or the computer delivers a message that the printer is off line (even though it works with the other computers). I use the C6380 via a home wireless network.
Reinstalling the HP Software helps for a short time, but the problem soon recurs.
I cannot seem to find anything in any of the Trouble shooting guides on HP or MS websites. HELP!If it works on one Firefox 3.6.10 installation, it should work on the other - assuming both PC's have exactly the same version of Norton installed, including that Firefox Toolbar extension. Another possibility is that Norton uses a different version of their software on WinXP than they use on Vista.
Tools > Addons > Extensions - does the Norton Toolbar show as being incompatible?
You could try forcing a Norton program update to see if their Firefox extension gets updated. -
ITunes not working properly with HP running Vista home premier
My Ipod touch works fine on my windows XP pro system but does not sync photos and podcasts from my other computer at home: new HP Multimedia system running Vista Home Premier. It goes through all the motions but will only add a few photos from a file and they are partially corrupt. Many times it won't add any selected photos. Same with podcasts, they won't sync to the ipod. Have tried various USB ports.
well, it is easy. i just wish it to sync in a manner that i do not get frustrated with it. it just does not like to sync when i open up itunes on desktop to update apps when they have updates. i have got to revert to plugging in the phone and ipad for it to sync and update apps. if you read through the whole thing you would have found it out. all i am saying is that itunes 10.6.1 and ios 5.1 have bugs and issues that make it hard for a iphone and ipad user to sync and update apps. itunes is slow to open with windows 7 as well as i did not mention that before but i have mentioned it in my other forum posts.
summary:
itunes 10.6.1, is slow to open on windows 7,
syncing ipad and iphone does not update without plugging them in.
wifi sync is not working properly or as it should, it doesn't recognize phone and ipad unless plugged in. -
Unable to print to office jet pro 8600 over wifi from a laptop running vista, basic home edition
Have a new officejet 8600 pro and am able to print via wifi from laptop running windows 7 and hp touchpad running webos, so all is working fine. However, I am unable to print via wifi from a laptop running Vista Home Basic, 32 bit OS. I can see the printer from the laptop, but when trying to connect to it, receive the error message "Unsuccessful Network Installation, the printer was unable to be installed over the network".
Have downloaded drivers from HP, turned off laptop firewall to ensure no blocking and still no luck. Any suggestions would be welcome. Thanks.Download and run this: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&cc=us&dlc=en&lc=en
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
How to clean project from comman line ?
How to clean project from comman line ? I would like to invoke the same functionality as in Flex Builder Project -> clean... -> clean all projects... but from command line is it possible ?
-
My computer isn't seeing my HP Officejet Pro 8600
My computer (Mac OS X 10.8.5) is connected to my home wireless router, yet my computer which is connected to the same can't see it. The printer network test says all is good. I try to connect by way of my chrome browser and it isn't found. I try to
-
Fault tolerance for network printing
What options are available to provide fault tolerance for network printing? Currently, all our shared printers are on ServerA. Is it possible to have similar shared printers on ServerB and have the clients automatically switch to Server B if Server
-
Hi all, We have a infoset and query, which were working fine so far. I have one zfield in my infoset, in my query output, this zfield will show 1 as value for one record. But due to some scenarios, the value 1 is coming for multiple records in my out
-
Develop plugin for indesign server
Hi, i donno if this question is really trivial or if i'm just approaching this the wrong way. I need to develop a plugin that i'll have to run using indesign server. I have been reading the sdk documentations and trying to understand whatever i can.